Professional Documents
Culture Documents
Tdkelectronicsinc B41695a5687q9 Datasheets 2672
Tdkelectronicsinc B41695a5687q9 Datasheets 2672
© EPCOS AG 2011. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Axial-lead and soldering star capacitors B41695, B41795
Compact up to 150 °C
Applications
Compact design for automotive applications
Features
Up to 150 °C operating temperature up to 55 V DC
Rated voltage up to 100 V upon request
High ripple current capability
High vibration resistance
Long useful life
Compact design
Optimized CV value
Shelf life up to 15 years at storage temperatures up to 40 °C.
To ensure solderability, the capacitors should be built into the
application within one year of delivery. After a total of two
years' storage, the operating voltage must be applied for one
hour to ensure the specified leakage current.
Construction
Charge/discharge-proof, polar
Aluminum case with insulating sleeve
Negative pole connected to case
Terminals
Axial leads, welded to ensure perfect electrical contact
Also available with soldering stars
VR (V DC) 25 40 63 75
Case dimensions d × l (mm)
CR (µF)
220 12 × 30 12 × 30
270 14 × 30
330 14 × 30
390 16 × 30
470 12 × 30 16 × 30
560 16 × 39
680 12 × 30 14 × 30 16 × 39
860 18 × 39
20 × 29
1000 14 × 25 16 × 30 18 × 39
1100 20 × 29
1200 21 × 39
1500 16 × 30 16 × 39
1800 21 × 39 21 × 49
2200 18 × 30 18 × 39 21 × 49
20 × 29
3300 18 × 39 21 × 39
20 × 29
4400 21 × 49
5000 21 × 39
6800 21 × 49
Technical data
CR ESRtyp ESRmax ESRmax ESRmax Zmax IAC,max IAC,max IAC,max IAC,R IAC,max1)
100 Hz 100 Hz 100 Hz 100 Hz 10 kHz 100 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz
20 °C 20 °C 20 °C 40 °C 20 °C 20 °C 85 °C 105 °C 125 °C 125 °C 150 °C
µF mΩ mΩ mΩ mΩ mΩ A A A A A
VR = 25 V DC
680 190 320 2800 240 220 3.2 2.75 2.1 1.4 0.7
1000 135 230 1900 170 160 3.6 3.1 2.35 1.55 0.75
1500 90 155 1200 115 105 4.7 4.0 3.0 2.05 1.0
2200 65 110 950 85 80 5.8 5.0 3.8 2.5 1.2
3300 45 75 700 58 55 8.1 7.0 5.3 3.5 1.7
3300 ∇ 40 70 700 53 50 8.1 7.0 5.3 3.5 1.7
5000 28 48 500 36 35 11.5 10 7.5 5.0 2.5
6800 22 36 350 28 28 14.5 12.6 9.5 6.3 3.1
VR = 40 V DC
470 175 290 3000 185 180 3.5 3.0 2.3 1.5 0.75
680 125 205 2200 135 130 4.4 3.8 2.85 1.9 0.85
1000 90 145 1500 95 91 5.3 4.6 3.45 2.3 1.15
1500 60 100 1000 65 62 7.3 6.4 4.8 3.2 1.6
2200 45 75 700 50 48 8.3 7.2 5.4 3.6 1.8
2200 ∇ 41 68 700 45 44 8.5 7.3 5.5 3.7 1.8
3300 28 45 500 30 30 12.0 10.4 7.8 5.2 2.6
4400 22 35 350 23 25 15.2 13.3 9.9 6.6 3.3
VR = 63 V DC
220 250 410 3000 200 190 3.4 2.95 2.2 1.5 0.75
330 170 275 2200 140 133 4.3 3.75 2.8 1.9 0.95
470 120 200 1500 100 105 5.1 4.5 3.3 2.25 1.1
680 85 140 1100 70 67 7.1 6.2 4.6 3.1 1.5
1000 62 100 750 55 54 8.2 7.1 5.4 3.6 1.8
1100 53 87 700 45 45 8.4 7.3 5.5 3.7 1.8
1800 34 55 500 30 30 12.2 10.6 7.9 5.3 2.6
2200 27 45 360 24 24 15.2 13.2 9.9 6.6 3.3
VR = 75 V DC
220 250 410 3000 200 190 3.4 2.95 2.2 1.5 0.75
270 170 275 2200 140 133 4.3 3.75 2.8 1.9 0.95
390 120 200 1500 100 105 5.1 4.5 3.3 2.25 1.1
560 85 140 1100 70 67 7.1 6.2 4.6 3.1 1.5
860 53 87 700 45 45 8.4 7.3 5.5 3.7 1.8
860 62 100 750 55 54 8.2 7.1 5.4 3.6 1.8
1200 34 55 500 30 30 12.2 10.6 7.9 5.3 2.6
1800 27 45 360 24 24 15.2 13.2 9.9 6.6 3.3
∇ Variant with different case dimensions
1) IAC,max (10 kHz, 150 °C) measured at VR = 20 V DC, 35 V DC, 55 V DC, 65 V DC instead of VR = 25 V DC, 40 V DC, 63 V DC, 75 V DC.
Useful life
depending on ambient temperature TA under ripple current operating conditions at VR1)
Useful life
depending on case temperature TC under ripple current operating conditions at VR1)
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Useful life
depending on ambient temperature TA under ripple current operating conditions at Vop2)
VR = 25 V: Vop ≤ 20 V VR = 40 V: Vop ≤ 35 V
VR = 63 V: Vop ≤ 55 V VR = 75 V: Vop ≤ 65 V
Useful life
depending on case temperature TC under ripple current operating conditions at Vop2)
VR = 25 V: Vop ≤ 20 V VR = 40 V: Vop ≤ 35 V
VR = 63 V: Vop ≤ 55 V VR = 75 V: Vop ≤ 65 V
2) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling aluminum electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Product safety
The table below summarizes the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Reference
chapter "Capacitors with
screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially "Screw terminals
of insulating when ring clips are used for mounting. accessories"
sleeves
Note
All dimensions are given in mm.
Page 17 of 17