Professional Documents
Culture Documents
Norgren
Norgren
Technical features
Medium: Exhaust port: Ambient/Media temperature: Materials:
Compressed air only G1/2 with ISO G main ports Solenoid operated: Body: Zinc
Operating pressure: 1/2 PTF with PTF main ports Depending on solenoid rating Elastomers: Synthetic materials
3 ... 10 bar (44 ... 145 psi) Flow factor: -20° ... +50°C (+4° ... +122°F) Internal components: Aluminium
solenoid actuated 2/2 Cv = 4.0 Pilot operated
3 ... 17 bar (44 ... 250 psi) 3/2 IN » OUT Cv = 3,2 -20° ... +80°C (+4° ... +176°F)
pilot actuated 3/2 OUT » EXHAUST Cv = 5,3 Version with gauge:
Port size: Flow direction: -20° ... +65°C (+4 ... +149°F)
Unthreaded 2/2 NC: A » B Air supply must be dry enough
Pilot port: 2/2 NO: A » B to avoid ice formation at
G1/4 with ISO G main ports 3/2: B»A temperatures below +2°C
1/4 PTF with PTF main ports (+35°F).
1 (A)
1 (A)
(B) 1 3
1 (A)
(B) 1 3
*1) Unthreaded
*2) To select other solenoid type and coil voltage refer to option selector on page 2
Our policy is one of continued research and development. We therefore reserve the right to amend, 07/23
without notice, the specifications given in this document. (1998 - 8065e) © 2020 Norgren Ltd. en 8.200.615.001
Option selector P74˙-N˙˙-˙˙˙
Function Substitute Connector Substitute
2/2 NC A With A
2/2 NO B Without N
3/2 NC C Voltage Watts Substitute
Exhaust port only Substitute 24 V d.c. 2W F
PTF A 12 V d.c. 2W E
ISO G parallel (standard) G 220/240 V 6/5,0 VA B
Operator Substitute a.c.
110/120 V 4/2,5 VA A
Air pilot *1) A a.c.
22 mm miniature solenoid C No coil – Z
*1) T
o order air pilot models also No solenoid – N
substitute ‘NNN’ at digits 8, 9 and Manual Substitute
10 e.g. P74A-NGA-NNN. override
Push only, P
spring return
Without N
0657868000000000
Accessories
Wall mounting Quikclamp® Quikclamp with Quikmount pipe Porting block with 2/2 Shut-off valves (for 3/2 Shut-off valves (for
bracket wall bracket® adaptor *1) three alternative full technical specification full technical specification
1/4” ports see datasheet 8.200.600) see datasheet 8.200.600)
Page 4 Page 4
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 8.200.615.002 without notice, the specifications given in this document. (1998 - 8065e) © 2020 Norgren Ltd. 07/23
Drawings Dimensions in mm
Projection/First angle
1 2
89
97
37
45
3
80 80
58
58
1 1
2 1 2 1
3 4
155
163
1 1
37
45
1 1
3
80 80
50 50
Accessories
Quikclamp® Quikclamp® with wall bracket Porting block Pipe adapter
74
24,5 46
51 36 18
24 6,5
6
36
51
51
ø 6,5
4
90°
1
45 21 10 1 Main ports 3/8”, 1/2” or 3/4”
102
51
33 ISO G/PTF
83
4
10 Ports 1/4” ISO G/PTF
plugged
Our policy is one of continued research and development. We therefore reserve the right to amend,
07/23 without notice, the specifications given in this document. (1998 - 8065e) © 2020 Norgren Ltd. en 8.200.615.003
Wall mounting bracket Shut-off Dimensions in mm
Projection/First angle
69 valves 70 39 31
63,5 79
20 51 OPEN
33
6,5 20 1 1,5
74
35
6
5
50
61
11 18
20
31
1 Main ports
- +
3
ØD
13
A
40
32 G1/2
14 B
44 40
57
A B C D Model
R1/2 17 92 32 32 MB004B
13 Pressure switch is not in scope of delivery 1/2 NPT 17 92 32 32 MB004A
14 Alternative G1/4 ports plugged
Warning
These products are intended for use in industrial compressed air The system designer is warned to consider the failure modes of
systems only. Do not use these products where pressures and all component parts used in fluid power systems and to provide
temperatures can exceed those listed under »Technical features/ adequate safeguards to prevent personal injury or damage to
data«. equipment in the event of such failure.
Before using these products with fluids other than those specified, System designers must provide a warning to end users in the
for non-industrial applications, life-support systems or other system instructional manual if protection against a failure mode
applications not within published specifications, cannot be adequately provided.
consult Norgren. System designers and end users are cautioned to review specific
Through misuse, age, or malfunction, components used in fluid warnings found in instruction sheets packed and shipped with
power systems can fail in various modes. these products.
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 8.200.615.004 without notice, the specifications given in this document. (1998 - 8065e) © 2020 Norgren Ltd. 07/23