The document provides design calculations to check the capacity of a fastener and angle bracket under shear and tension loads. It specifies a shear load of 7.62 kN on a grade M12 fastener in double shear. The allowable shear strength of the fastener is 26.55 kN, greater than the applied load, so the fastener passes the shear check. It also shows a diagram of an angle bracket that will be checked for tensile yielding and rupture.
The document provides design calculations to check the capacity of a fastener and angle bracket under shear and tension loads. It specifies a shear load of 7.62 kN on a grade M12 fastener in double shear. The allowable shear strength of the fastener is 26.55 kN, greater than the applied load, so the fastener passes the shear check. It also shows a diagram of an angle bracket that will be checked for tensile yielding and rupture.
The document provides design calculations to check the capacity of a fastener and angle bracket under shear and tension loads. It specifies a shear load of 7.62 kN on a grade M12 fastener in double shear. The allowable shear strength of the fastener is 26.55 kN, greater than the applied load, so the fastener passes the shear check. It also shows a diagram of an angle bracket that will be checked for tensile yielding and rupture.