Professional Documents
Culture Documents
Spectrum Wheel Output
Spectrum Wheel Output
Spectrum Wheel Output
Materials Needed
Procedure
1. Cut the two art files that make up the wheel as shown below.
2. Cut along the lines drawn on the top wheel. The small window near the
center of the wheel should be completely cut out and removed.
3. Punch a whole into the center of the two wheels together. You may use a
button fastener to hold the two wheels securely in place, one on top of the
other, but they should be free to rotate relative to each other.
4. When you see a region of the EM spectrum show up in the open window
and the “W, F, E” that correspond to that region showing up under the flaps
then you know that you have done it right.