Professional Documents
Culture Documents
Universal Instruction
Universal Instruction
cut line
5 6A
1
Bending line
9 Mountain
10 12B
11 12A Bending line
Valley
Flags
for
16A 16B gluing
BLUE
4
5
16A 3
6 23 22
27
28
7
104 29
Gluing numbers
You will need: cardboard, printer, dotting pen, ruler, scissors, glue
S/aga t. Candboand
S/aga 2. §niv/ivg
Print the template on the printer.
You can print directly on designer
paper if your printer supports thick
paper. If your printer can only print on
thin office paper, you can print on
regular sheets and use them as a
template. To do this, glue the template
printed on thin sheets
to the design cardboard on
double-sided tape or PVA glue.
10
11
1
12A 5
9 6A
12B
S/aga 3. §na9anivg bavd livas
Push the line of future bends. These
lines are designated as dotted and dash-
dotted lines. Use a dotting pen for this.
You can also use other hard and thin metal
objects that won't scratch the paper, but will
leave a dent on the paper. Just place the
ruler along the line and trace the dotting pen
9 11 12A 12B
16B
16A
0
S/aga 4 . Cu//ivg
Cut out the pieces.
We recommend using scissors.
You can also cut out with a
breadboard knife on a
breadboard mat.
16B
12B
11
6A 12A
9
5
1
16A
10
S/aga S. Bavdivg
Bend all the cut pieces. The
places of bending are indicated
by dotted and dash-dotted
16B lines. Follow the rule: dotted line
is a valley, dash-dotted line is a
mountain. Prepared bends greatly
simplify further assembly.
11 12A
6A 12B
S/aga S. Sluivg
Arrange the pieces in descending order, the pieces numbered 1 will be on top. So, you
will start with part 1, glue part 2 to it, then part 3, and so on in ascending order. Parts can also
be called A and B, they indicate symmetrical parts, such as legs or ears of a figure. You
need to glue the pieces together using gluing numbers. Glue by the same numbers in such a
way that the flags for gluing is inside the figure. Use whatever glue you are
comfortable with, we recommend using hot glue.
170
172 164
164 90
167
10
167 89
171
88
165
177 165
91
175
Scale Sculp/ures
The size of the sculpture A0
depends on the chosen format, with
the original format being A4.
Format Size A1
Original A4
100%
A2
A3
140%
A2 A3
200%
A1 A4
280%
A0
400%