Professional Documents
Culture Documents
SGCMC-Tool Box Talk-OSH-FRM-03
SGCMC-Tool Box Talk-OSH-FRM-03
Reference No:
Construction Health, Safety and Environment Plan SGCM-OSH-FRM-26-C
Rev. / Issued: Rev. Date:
Identify Hazards / Risk in the Area: Identify Clients LSRs for this Job:
(✔ Yes X No) (✔ Yes X No)
❑ Flammable Substances ❑ Confined Spaces ❑ 3. Do not walk or stay under a suspended load.
❑ Transportation Hazards ❑ Existing live facilities 4. Carry a personal Gas detector & EEBA when
❑ entering an H2S Zone.
❑ Excavation Hazards ❑ Electricity
5. Obtain authorization or a valid confined space
❑ certificate before entering a confined space.
❑ Lifting Hazards ❑ Fire Hazards
❑ Radioactive Materials ❑ Noise 6. Verify isolation before work begins and use the
❑ specified life protecting equipment.
Hot Works Hazards:
❑ Welding, Cutting & ❑ Wellhead Location ❑ 7. Work only with a valid permit to work
Grinding Etc….. 8 Obtain authorization or a valid Permit to Work
❑ Radiography Hazards ❑ Hydro Testing Hazards ❑ before overriding or disabling safety-critical
equipment / system.
❑ Shutdown Activities ❑ Other ___________ ❑ 9. Wear a seat belt
Fire Extinguisher
Evacuation route explained ❑
Emergency Telephone
❑ Full Body
IDENTIFY ADDITIONAL PPE FOR THIS JOB ❑ Dust Mask ❑ Face Shield
(Hard Hats, Coverall , H2S escape Mask , H2S personal monitor , Safety Harness
Goggles, Safety shoes are mandatory for all jobs)
❑ SCBA ❑ Gloves ❑ Other :
10
11
12
13
14
15
16
17
18
19
20
21
22
23
I declare that I have reviewed the conditions of the work permits and / or the safe work requirements for this job.
_____________________________ _________________________
Project Engineer HSE Officer Signature
I understand and will conform to the requirements as discussed at the briefing of the above mentioned documents: