Professional Documents
Culture Documents
MasterEase 3503 v1
MasterEase 3503 v1
MasterEase 3503 v1
Page 1 of 2
MasterEase® 3503
TEST CERTIFICATION/APPROVALS
In the cured state, improvement of
ASTM C494 Types G
sustainability
IS 9103
i. Excellent early and late compressive strength
PACKAGING
ii. Improvement of quality of surface finishes
iii. As part of a reduction of W/C The MasterEase 3503 is available in 245 kg drum
Increased mechanical resistances and bulk delivery.
Decreased porosity and permeability SHELF LIFE
Decreased shrinkage and cracking MasterEase 3503 must be stored where
Enhanced durability temperatures do not drop below +5°C. If product
APPLICATION has frozen, thaw at +5°C or above and
completely reconstitute using mild mechanical
The optimal effect is generally achieved by dosing
agitation. Do not use pressurized air for agitation.
MasterEase 3503 in the concrete mix after
Store under cover, out of direct sunlight and
addition 70% of water in the mixer.
protect from extremes of temperature.
DOSAGE Shelf life is 12 months when stored as above.
Failure to comply with the recommended storage
Recommended range: 300ml to 1500ml per 100kg
conditions may result in premature deterioration
cementitious material. of the product or packaging. For specific storage
For other uses, please contact your local advice consult your local Master Builders
Master Builders Solutions representative. Solutions representative.
To use in synergy and combination with another PRECAUTIONS
Master Builders Solutions’ product range, please
Health: MasterEase 3503 does not contain any
consult your local Master Builders Solutions
hazardous substances requiring labelling.
representative.
It is safe for use with standard precautions followed
CHARACTERISTICS in the construction industry, such as use of hand
gloves, safety goggles, etc.
Aspect Reddish brown liquid
Relative Density 1.07 ± 0.02 @ 25°C
TDS Ref. No.: MasterEase3503/01/0319
pH >6 @ 25°C
Solid Content 25.00± 5%
( 5% of the specified value
of solid content)
Field service where provided does not constitute supervisory responsibility. Suggestions made by Master Builders
NOTE Solutions either orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since
they, and not Master Builders Solutions, are responsible for carrying out procedures appropriate to a specific
application.