Professional Documents
Culture Documents
Super Plasticizer For High Strength Concrete
Super Plasticizer For High Strength Concrete
Page 1 of 3
MasterEase® 3505
In the cured state, improvement of TEST CERTIFICATION/APPROVALS
sustainability ASTM C494 Type G
i. Excellent early and late compressive strength IS 9103
ii. Improvement of quality of surface finishes
PACKAGING
iii. As part of a reduction of W/C
Increased mechanical resistances The MasterEase 3505 is available in 245 kg drum
Decreased porosity and permeability and bulk delivery.
Decreased shrinkage and cracking SHELF LIFE
Enhanced durability MasterEase 3505 must be stored where
APPLICATION temperatures do not drop below +5°C. If product
has frozen, thaw at +5°C or above and
The optimal effect is generally achieved by dosing completely reconstitute using mild mechanical
MasterEase 3505 in the concrete mix after agitation. Do not use pressurized air for agitation.
addition 70% of water in the mixer. Store under cover, out of direct sunlight and
DOSAGE protect from extremes of temperature.
Shelf life is 12 months when stored as above.
Recommended range: 300ml to 1500ml per 100kg
Failure to comply with the recommended storage
cementitious material. conditions may result in premature deterioration
For other uses, please contact your local of the product or packaging. For specific storage
Master Builders Solutions representative. advice consult your local Master Builders
To use in synergy and combination with another Solutions representative.
Master Builders Solutions’ product range, please PRECAUTIONS
consult your local Master Builders Solutions
Health: MasterEase 3505 does not contain any
representative.
hazardous substances requiring labelling.
CHARACTERISTICS It is safe for use with standard precautions followed
Aspect Reddish brown liquid in the construction industry, such as use of hand
gloves, safety goggles, etc.
Relative Density 1.08 ± 0.02 @ 25°C For detailed Health, Safety and Environmental
pH >6 @ 25°C Recommendations, please consult and follow all
instructions on the product Material Safety Data
Solid Content 36.0% ± 5% Sheet.
( 5% of the specified value
of solid content)
TDS Ref. No.: MasterEase3505/01//04/2021
Field service where provided does not constitute supervisory responsibility. Suggestions made by Master Builders
NOTE Solutions either orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since
they, and not Master Builders Solutions, are responsible for carrying out procedures appropriate to a specific
application.