Professional Documents
Culture Documents
Exploring Ventilation Efficiency in Poultry Buildings
Exploring Ventilation Efficiency in Poultry Buildings
papers
Abstract The advent of high-performance terrestrial laser scanners has made it possible to
capture dense point-clouds of engineering facilities. 3D shape acquisition from
engineering facilities is useful for supporting maintenance and repair tasks....
Preventing circulating fluidised bed agglomeration and deposition during biomass combustion
Adsorptive Separation Studies of 𝜷-Carotene from Methyl Ester Using Mesoporous Carbon
Coated Monolith
2012 / Yuanwei Lu, Dinghui Wang, Yuting Wu, Chongfang Ma, Xingjuan Zhang, et al.
Galvanic Interaction between Chalcopyrite and Pyrite with Low Alloy and High Carbon
Chromium Steel Ball
2013 / Asghar Azizi, Seid Ziaoddin Shafaei, Mohammad Noaparast, Mohammad Karamoozian
Calculation of Thermal Pressure Coefficient of R11, R13, R14, R22, R23, R32, R41, and R113
Refrigerants by Data
2012 / Dong-Sheng Shen, Bao-Cheng Huang, Pei-Qing Liu, Jian-Xun Han, Hua-Jun Feng
Breakthrough Curve Analysis for Column Dynamics Sorption of Mn(II) Ions from Wastewater by
Using Mangostana garcinia Peel-Based Granular-Activated Carbon
3D CFD Simulations of MOCVD Synthesis System of Titanium Dioxide Nanoparticles
2013 / Siti Hajar Othman, Suraya Abdul Rashid, Tinia Idaty Mohd Ghazi, Norhafizah Abdullah
Micro-algae cultivation for biofuels: Cost, energy balance, environmental impacts and future
prospects
2015 / Manuel Götz, Jonathan Lefebvre, Friedemann Mörs, Amy McDaniel Koch, Frank Graf, et
al.
On the breakup of an air bubble injected into a fully developed turbulent flow. Part 1. Breakup
frequency
2014 / Nicholas Ballard, Simone Rusconi, Elena Akhmatskaya, Dmitri Sokolovski, José C. de la Cal,
et al.
Coated stainless steel 441 as interconnect material for solid oxide fuel cells: Evolution of
electrical properties
Abstract AISI 441 coated with a double layer coating of 10 nm cerium (inner layer) and
630 nm cobalt was investigated and in addition the uncoated material was exposed for
comparison. The main purpose of this investigation was the development of a...