Professional Documents
Culture Documents
Speakers and Microphone Set Up Instructions
Speakers and Microphone Set Up Instructions
Speakers and Microphone Set Up Instructions
This is the control center for all sound (the mixer). You do not need to adjust any buttons except the
white “Level” buttons. I will tell you which are relevant in the following steps.
Step Six: Turn on the Bluetooth if you are wanting to play music through a phone or computer. To pair to
a device for the first time, hold down the button until it flashes rapidly. The connection name is
“STAGEPAS 600BT.”
Step Seven: To adjust the volume of sound played through Bluetooth, use the white “Level” dial on
channel 9/10. Do not adjust the volume by the red “Master” dial.
Step Eight: To adjust the microphone volume, use the white “Level” dial for channel 1. Do not adjust the
volume using the red “Master” dial.
Step Nine: Your final configuration should look something like this, with the speakers in front of the
microphone. This is to avoid feedback from the microphone picking up sound from the speakers. You
can remove the microphone from the stand and walk around, just be careful around the speakers to
avoid feedback. To adjust the mic stand, loosen the handle on the stand and move it higher or lower as
needed.