Professional Documents
Culture Documents
Fallprotec Catalogue
Fallprotec Catalogue
E. Works in suspension
02 EN 795:2012 Type D | CEN/TS 16415:2013
EN 1808:2015 I BS8610:2017
EN 60204-1 | Directive 2006 / 42 / EC
Safe Access
Equipment
2
Work at height European regulations and standards
EN 795:2012 2006/EC/42:2006
It is the technical requirements placed on This European directive specifies the
horizontal (up to 15°) fall arresting anchor safety features for machinery. The Annex
devices. The EN 795 distinguishes five IV concerns lifting equipment. All height
types of anchorage device, from A to E. access products of Fallprotec are certified
according to the directive 2006/EC/42.
• Type A refers to single anchors.
• Type B refers to temporary anchorage points.
Application Icons • Type C refers to horizontal flexible EN 1808:2015
visystems such as cable lifelines. It is a European standard which specifies the
safety requirements for Suspended Access
• Type D refers to rigid systems, Equipment (SAE). It is applicable to both
viusually rail systems. permanent and temporary equipment
Industrial Housing Buildings • Type E refers to temporary systems that which may be powered or hand operated.
viare stabilized using counterweights. The Fallprotec monorails and cradles are
designed according to EN 1808:2015.
This standard considers only
Potentially Over Vertical
single-user applications. EN 60204-1:2018
explosive Trucks Structures
atmosphere This standard gives safety guidance and
recommendations on electrical equipment for
machinery. This includes safety requirements for
CEN/TS 16415:2013
electrical, electronic and computer-controlled
Confined Fall Rope
This technical specification certifies anchor equipment – but excludes power circuits where
Spaces Arrest Access devices that allow more than one user to electricity is used directly as a working tool.
be attached at the same time. Since work at
height requires at least two workers, Fallprotec
tests all systems for several people.
Work in Ground Wall
restraint configuration configuration
EN 353-1:2018
This European standard defines the technical
Ceiling requirements for vertical rigid anchor line. The
configuration forward-leaning angle and/or sideways leaning
angle lies between 85° and 95°.
3
Fall Factor Fall Factor 0 Fall Factor 1 Fall Factor 2
Lenght of lanyard/rope
divided by the length of the lanyard
or rope available to absorb that fall.
The fall factor ranges from 0 to 2.
Independently on a fall being long
or short, the lower the fall
Fall distance
factor, the safer the fall. After
Lenght of lanyard/rope
Fall distance
After
Fall distance
After
4
D Fall ClearanceRequired = D + Ll + La - Lp + Hu + Hs
Fall Clearance Required < Fall Clearance Available
Fall
Clearance
The height of fall must be less
than the available clearance so
5
01
Height Safety Systems
Horizontal Fall Arrest
SecuRope ®
On ground
■ For 4 users
■ Freehand system
■ Undeformable
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
Compliant with
EN 795:2012 Type C
CEN/TS 16415:2013
Applications on
6
Horizontal SecuRope lifeline directly on concrete
Glider with
No need to
approach to pass
Minimum radius the intermediates.
steel carabiner
1 Maximum span
300mm 12m Surpassable lifeline
2
3
7 Fallprotec offers a wide range
4 6
5 of gliders adapted to each type
of situation. Delivered with steel
1
carabiners, the glider passes
4 4 smoothly over the intermediate
2
anchors, letting the user move
freely along the lifeline.
1. LDV137 5. LDV060 1. LDV001 / 2. LDV043 (NEO)
2. LDV002 6. LDV138
3. LDV001 7. LDV143
4. LDV043 (NEO)
Fallprotec provides captive
gliders (LDV111) and opening
gliders (LDV001), gliders for
Intermediate anchors lifelines in every configuration.
It also offers a glider for
for horizontal lifelines inclined lifelines blocking
instantly in case of a fall
The NEO anchor is roof protecting
thanks to its integrated shock absorbing Brake Smooth gliding through
system. Reusable after stopping a fall. mechanism
the anchors.
LDV043 (NEO)
LDV075
Energy
absorption
by shear pin
breaking The EVO anchor, LDV043 (NEO) LDV083 (EVO)
a competitive Energy absorbing
solution, has been Undeformable
specifically designed Stainless steel components
for concrete grounds Suitable for fragile structures
and rigid structures. Available in copper alloy
LDV083 (EVO) for ATEX environments
7
01
Height Safety Systems
Horizontal Fall Arrest
SecuRope ®
Overhead
■ For 4 users
■ Undeformable
Compliant with
EN 795:2012 Type C
CEN/TS 16415:2013
Applications on
8
Securope overhead NEO SecuRope Lifeline between two walls and NEO SecuRope Lifeline on wall configuration
lifeline. Most used
configuration for
industrial halls 1. LDV054
2. LDV134
as the overhead 3. LDV043 (NEO)
lifeline reduces the 4. LDV141
falling distance. 1 2 3
5. LDV144
6. LDV137
4 7. LDV002
8. LDV005
5 9. LDV143
6 7 3 4 8 9
9
01
Height Safety Systems
Horizontal Fall Arrest
On post
Type of fixation
■ For 2 users
■ Undeformable
■ Galvanized steel
Compliant with
EN 795:2012 Type C and D
CEN/TS 16415:2013
Applications on
10
The posts can be waterproofed SecuRope EVO lifeline on posts
using various techniques:
■ LDV081 Waterproofing collar. This collar
is set between the post and the lifeline
anchor during the mounting of the The user stays connected while moving along
lifeline. The water drips around the post the lifeline and passing the intermediate anchors,
as the collar deflects it. having an excellent freedom of movement and
1 reaching safely any point of the structure.
■ IDF011 IDF012 flashing. This solution Maximum span
requires a pre-installation of the EPDM 12m For rigid structures such as concrete or steel beams,
flashing on the post. Waterproofing is the undeformable Fallprotec post is a safe choice.
managed by flame-sealing the flashing 2
to the structure.
2
4
End anchor 1.
2.
LDV137
LDV005 / LDV006
on post 3.
4.
5.
LDV083
IDF018
LDV145
LDV137, LDV106, LDV006, 6. LDV106
LDV081, IDF019 and LDV058 7. LDV143
11
01
Height Safety Systems
Horizontal Fall Arrest
On Unipost
Type of fixation
■ For 2 users
■ Deformable post
■ Energy absorbing
Compliant with
EN 795:2012 Type C
CEN/TS 16415:2013
Applications on
12
SecuRope lifeline on Unipost One post for most 1
supports. This reduces
the components in
Unipost means « Universal Maximum span stock and simplifies
10m
post ». It may be installed rigging on site.
on several types of roofing, The Unipost can also be
hot deck, cold deck, wood used as fixing assembly
deck, prefabricated slab for an anchor point.
and concrete slab, thanks 8 9
to the universal fixing
interface in laser cut plate.
6
7
2 3
4
5
2
3 1
On Cold deck
brackets
Type of fixation
■ For 4 users
■ Energy absorbing
Compliant with
EN 795:2012 Type C
CEN/TS 16415:2013
Applications on
14
The fixing bracket for cold deck SecuRope NEO on cold deck brackets
roofs has a unique design that
distributes the load evenly.
Minimum radius Maximum span
Combined with the energy 400mm 10m
absorbing mechanism
of the SecuRope NEO lifeline, it is
the best system for fragile roofs.
Fixing detail
NEO Anchor
on fixing
The bracket
is fixed on the assembly
corrugated Self-drilling
metal sheet screws
with self-drilling The bracket ensures a
screws. The homogeneous distribution
sealing tape in of the pull-out force on
EPDM ensures the cold deck roof.
the watertightness. Also available in
stainless steel.
LDV043 (NEO) / IDF053
15
01
Height Safety Systems
Horizontal Fall Arrest
On standing
seam roof
Type of fixation
■ For 4 users
■ No drilling needed
Compliant with
EN 795:2012 Type C
CEN/TS 16415:2013
Applications on
16
The fixing bracket for standing SecuRope NEO on standing seam roof
seam roof is clamped on the
seam and doesn’t require
any perforation. Minimum radius Maximum span
The clamps combine high 400mm 12m
Fixing clamps
NEO Anchor
Fallprotec provides
different clamp types to Easy on fixing
installation
match the corresponding
standing seam roof:
assembly
The bracket ensures a proper
IDF042 S5-E clamp for standing fixing on the standing
seam roof with double folds seam and load distribution.
IDF045 S5-Z clamp for LDV043 (NEO)
standing seam shaped bulb IDF060
IDF043 S5-S clamp for standing
seam with double folds
IDF041 Copper S5-B clamp for
standing seam with double folds
17
01
Height Safety Systems
Horizontal Fall Arrest
On hot deck
brackets
Type of fixation
■ For 4 users
■ Undeformable
■ Energy absorbing
■ Can be retrofitted
Compliant with
EN 795:2012 Type C
CEN/TS 16415:2013
Applications on
18
The Multipost and SecuRope NEO on hot deck brackets
SpotAnchor are designed
for hot deck roofs.
Minimum radius Maximum span
400mm 12m
8
High resistance toggle
6
bolts enable the fixation
on corrugated metal 7
sheets, wooden panels
or precast concrete.
4 5
The SpotAnchor
is fixed by a
NEO Anchor
reinforced toggle bolt
FAS005. This allows a
on SpotAnchor
distribution of forces
on a large surface.
fixing assembly
For modern constructions with
wooden panels, the SecuRope
lifeline is installed on SpotAnchor.
LDV043 (NEO) / LDV092
19
01
Height Safety Systems
Horizontal Fall Arrest
On Unipost
for green roof
Type of fixation
■ For 2 users
■ Easy installation
■ No perforation of roofing
membrane
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
Compliant with
EN 795:2012 Type C & Type A
CEN/TS 16415:2013
Applications on
20
The Unipost for green Horizontal Unipost lifeline for green roofs
roof is either used as
anchor point for one
or two persons or as
support for the lifeline.
It can be used on
horizontal roofs up
to a slope of 5°. The
waterproofing, roof
insulation and roof
structure remain intact.
1 2 3 4 5 6 7 8
21
01
Height Safety Systems
Horizontal Fall Arrest
On steel
beams
Type of fixation
■ For 4 users
■ Undeformable
■ Stainless steel
■ Clamping perpendicularly or
in parallel to the axis of the
exerted force
Compliant with
EN 795:2012 Type C
CEN/TS 16415:2013
Applications on
22
SecuRope horizontal overhead on steel beams
3 4
2 7
1
5 6 8
23
01
Height Safety Systems
Horizontal Fall Arrest
SecuRail Pro ®
■ For 2 users
■ Span up to 6m
■ 1,7 kg/m
■ Low deflection
■ Anodized aluminium
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
Compliant with
EN 795:2012 Type D
CEN/TS 16415:2013
Applications on
24
The SecuRail Horizontal SecuRail Pro lifeline on ground
Pro is a rigid and
versatile fall arrest
rail. This unique Minimum radius 6
330mm
profile has a high
inertia that enables 5
a 6 meter span
between supports. 3
7
lt is ideal for work
sites with low
fall clearance.
Maximum span
2 4 6m 4
1
1. RHF509 5. RHF510
2. RHF504 6. RHF511 (GRANVIA)
3. RHF552/RHF553 7. RHF514
4. RHF516
25
01
Height Safety Systems
Horizontal Fall Arrest
SafeAcess ®
fall arrest
■ For 4 users
■ 5kg/m
■ Span of 6m
■ Undeformable
■ ATEX certified
■ Aluminium 6060T6
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
Compliant with
EN 795:2012 Type D
CEN/TS 16415:2013
Applications on
26
The SafeAccess is an undeformable Horizontal fall arrest
fall arrest rail for industrial applications.
Installed in overhead configuration,
it is the most suitable system The Flexbow is a standardized 1. MHS023 (NAV 2) 5. MHS017
when the fall clearance is low. 2. MHS059 6. FLX009
outrigger beam to secure loading 3. FLX016 7. FLX012
bays and machinery. Equipped with 4. MHS061
ATEX certified for potentially an integrated energy absorber, it is
explosive atmospheres, a lightweight and yet robust design
this rail is also ideal for for industrial applications with a
petrochemical industries. minimum fall clearance of 4m.
1
The aluminium rail is protected by a high- Combined with the SafeAccess
quality powder coated surface treatment fall arrest rail for access 2
that resists to marine environment. on top of vehicles.
3
6
The SafeAccess 7
rail combined
with a safety
block enables
the safest
possible fall
arrest. Rotatory Junction
Flexbow-SafeAccess
MHS023 FLX018
Rotatory
lock kit
FLX017
27
01
Height Safety Systems
Vertical Fall Arrest
SecuRope ®
QuickSet
■ Opening glider with safety lock
■ Easy mounting
■ Overpassing anchors
■ Swagless system
■ No deformation of the
intermediate anchors
Compliant with
EN 353-1:2018
Applications on
28
The SecuRope QuickSet SecuRope QuickSet Vertical lifeline
is designed for wind dddditype 1 with absorber on line
turbines, pylones, masts
or industrial sites.
This flexible system is
used with stainless steel
cables. The glider is
openable and can be
inserted or removed at
any point of the cable.
New ZIP!
fall arrest
2 opening
glider
3 fitted with
energy
4
absorber
Two types of fall arrest
systems are possible Passing smoothly Brake
with this lifeline. mechanism
through the anchors,
Type 1: Energy absorber the glider locks in
fixed on the top anchor. case of a fall.
It is permanently Ladder LDV255
fixed on the lifeline.
Type 2: Energy absorber lifeline 5
fixed on the opening
glider. The glider locks 1. LDV233
instantly in case of a fall, 2. LDV241
3. LDV250
triggering the energy 4. LDV005 / LDV006
absorption device. 5. LDV266
29
01
Height Safety Systems
Vertical Fall Arrest
SecuRail Pro ®
MastLadder
■ Light aluminium rail
■ Undeformable
■ Freehand system
■ On ladder or with
fixed rungs (MastLadder)
■ Easy use
■ Possibility of custom-made
solutions by the Fallprotec’s
engineering department
Compliant with
EN 353-1:2018
Applications on
30
The SecuRail Pro Vertical SecuRail MastLadder and SecuRail Pro Vertical 2016 lifeline clamped on a ladder
is a rigid lifeline to secure
access on any structure.
When clamped on an existing
ladder it secures the end 1
user much better than the
regular safety hoops.
MastLadder
A MastLadder fitted with fixed
lifeline
1 2
rungs is designed for confined 1. RHF715
spaces, for industrial halls or 2. RHF700
3. RHF712
for telecommunication towers. 4. RHF518 (GRANVIA 4)
Undeformable stainless 5. RHF710
steel brackets connect the 6. RHF708
MastLadder to the structure.
2 3
3
SecuRail
4
Pro 4
1. RHF520
2. RHF518 (GRANVIA 4)
3. RHF552 / RHF553
4. RHF521
5. RHF522
5
6
31
01
Height Safety Systems
Vertical Fall Arrest
SafeLadder ®
Pro
■ Easy use
■ Ergonomic
■ Standard brackets in
various lengths
■ Anodized aluminium
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
Compliant with
EN 353-1:2018
Applications on
32
SafeLadder Pro
1
2
GRANVIA 4
Trolley equipped with
energy absorber.
3
RHF518
The SafeLadder Pro works with the
same rail system as the MastLadder.
Anchor points
Abseiling, fall arrest and restraint
■ Undeformable
■ Stainless steel
■ Abseiling solutions
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
Compliant with
EN 795:2012 Type A
CEN/TS 16415:2013
Applications on
34
Twinfix anchor point for 2 users
With a breaking strength above 50kN it can stop a
fall without any permanent deformation.
Reliable model for suspended rope access. Can be installed on ground, wall or ceiling
configuration.
LDV057
Reliable model for suspended rope access. The large opening of the anchor point facilitates
the connection of big carabiners. Can be installed on ground, wall or ceiling configuration.
On concrete or slab, the anchor point can be fixed with two independent
bolts. On a metallic structure, it can be fixed with one central bolt.
PTA016
35
01
Height Safety Systems
Anchor points
Fall arrest and restraint
■ Undeformable
■ Stainless steel
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
Compliant with
EN 795:2012 Type A
CEN/TS 16415:2013
Applications on
36
SafeAnchor Rotating high visibility anchor point
Yellow anchor point for 2 users in stainless steel and powder coated to
increase visibility. Fixed by one M12 bolt the anchor point is rotative to
follow the end user. It can be installed on ground and wall configuration.
LDV029
37
01
Height Safety Systems
Personal Protective Equipment
Harnesses
and Lanyards
■ Easy and quick to put on
■ Made in EU
Compliant with
EN 362:2005 I EN 358:2003
EN 361:2003 I EN 355:2003
EN 365:2005 I EN 813:2009
Applications on
38
Multifunctional
full body
harness and Prolight Harness
single elastic
lanyard The emblematic harness of Fallprotec is
lightweight and equipped with pads for the
Retractable
blocks
■ Energy absorbing
■ Made in EU
Compliant with
EN 360:2002
Applications on
40
These sturdy blocks are
certified for ceiling, wall and
ground configuration.
The overspeed system stops a
fall in a very short distance. The
integrated energy absorption
mechanism ensures that the
Ultra-compact
maximal force transmitted
to the end user is 6kN.
blocks
Complete range of retractable
The ultra-compact block is a
fall arresters from 2 to
user-friendly device. In areas
60 meters. Available
with limited fall clearance
with webbing strap or galvanised
the retractable is installed
steel cable. The spring mechanism
in overhead configuration.
keeps a constant tension on
When installed on the ground
the lanyard, thus facilitating the
it also enables the user to
movement of the end user.
reach areas further away
from the Fallprotec lifeline. IHWB2 / IHWS9 / IHRA
41
02
Safe Access Equipment
Works In Suspension
SecuRail Pro ®
for abseiling
works
■ For 2 users
■ 1,7kg/m
■ Low deflection
■ Anodized aluminium
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
Compliant with
EN 792:2012 Type D
CEN/TS16415:2013
Applications on
42
The SecuRail Pro is Horizontal SecuRail Pro for abseiling
a rigid and versatile
suspension rail.
A light-weight
solution that keeps
the aesthetic of 3
the building.
4 5
1. RHF532
2
2. RHF552 / RHF553
3. RHF531
4. RHF511
1 5. RHF530
Manual
brake
43
02
Safe Access Equipment
Works In Suspension
SafeAccess ®
■ Powder coated
■ Custom-made brackets
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
Compliant with
EN 1808:2015 I BS8610:2017
Applications on
44
The SafeAccess for SafeAccess Horizontal and trolleys
suspension work is an
efficient height access
1. MHS025
system for facade 2. MHS024
maintenance and cleaning. 3. MHS028
3 4. MHS056
5. MHS059 / MHS060
Highly versatile, it can be 6. MHS054
installed in building entrances, 7. MHS014
atriums, courtyards and on 8. MHS061
9. MHS048
the building main 10. MHS049
facades. Suspended 1
11. MHS017
access on structures of 7
5 to 300m height. 5
2
2 8
The track can be curved
and powder coated
10
in any RAL colour.
Trolley NAV 4
NAV 1 Trolley
Motorised trolley for the
suspension of cradles and
manually operated
RopeClimber lifting machine. by drive belt
The trolley is controlled from
the suspended equipment.
Compatible with the RopeClimber.
MHS056
MHS054
45
02
Safe Access Equipment
Works In Suspension
SafeAccess ®
Type C
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
Compliant with
EN 1808:2015 | BS8610:2017
Applications on
46
The SafeAccess C is a discreet SafeAccess C Horizontal concealed in ceiling with abseiling trolley
access system that is concealed
in a technical ceiling or a soffit.
The rail integrates harmoniously 2 2 3
the aesthetics of the building. 1
4
The track can be curved
and powder coated in any
RAL colour. Custom-made
brackets enable to align
the rail and the ceiling.
The trolleys roll in the inner 2
channel of the rail. 3
4
Manually, motorized or battery
operated trolleys are used
System for the 1
for horizontal movements.
cleaning and 1. MHS509
Compatible with rope access 2. MHS511
technicians, the RopeClimber maintenance 3. MHS500
and suspended platforms. of facades. 4. MHS508
47
02
Safe Access Equipment
Works In Suspension
SafeAccess ®
Climbing
■ Slopes up to 70°
Compliant with
EN 1808:2015
Applications on
48
The Climbing SafeAccess is Trolley NAV 6
installed on sloped facades or
atriums for the maintenance
and cleaning of the building. The trolley equipped
A high resistance stainless steel with 2 independent
chain is inserted through the electric engines for the
bottom channel of the rail. highest level of safety.
WLL 400Kg
The climbing trolley with pinion
can climb slopes up to 70°. A
chain based design is the most
reliable system for installations
with an important slope.
1. MHS065
2. MHS047
3. MHS040
1 2 System for
the cleaning
and maintenance
of inclined
structures
49
02
Safe Access Equipment
Works In Suspension
RopeClimber ®
Lifting Equipment
■ Autonomy up to 8 hours
depending on use
Compliant with
EN 1808:2015 I EN60204-1
Directive 2006 / 42 / EC I EN 795:2012
Type A CEN/TS 16415:2013 I BS8610:2017
Applications on
50
RopeClimber
Standing chair
(picture on the left)
Cradle
It is one of the lightest cradles
The standing chair is a ■ Safety features: fall arrest device available on the market
hybrid system allowing on the secondary rope, overload (deadweight 188kg). Battery
and top limit switch
the user to work seated driven, the RopeClimber hoist
as well as standing, so solves the hassle linked to control
the worker has a wide
■ Push buttons control box with
emergency stop cables and electric cables. This
range of motion and of system also works on textile wires,
reach, including over which are easier to handle than
■ Easy use, training as professional
his head. The position climber is not required cables. The RopeClimber cradle
of the RopeClimber is available for one or two persons
hoist, below the ■ LED that informs about the state (rated load of 120 kg or 240 kg).
centre of gravity of of charge of the battery as well
the person, increases as safety features
their “in air” stability. A
set of wheels makes ■ Versatile equipment
it easy to transport.
Can be used also with ■ Cost-efficient solution
a SafeAccess C rail.
■ Battery powered
51
02
Safe Access Equipment
Works In Suspension
Davit arms
■ Discrete solution, easily hidden
Lightweight solution
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
Compliant with
EN 1808:2015
Applications on
52
Davit on roof socket
Rotation 360°
Adjustable
Roof car
■ Light solution easy to move.
■ Possibility of custom-made
solutions with the Fallprotec’s
engineering department
54
The stability of Mobile davit on roof Motorized mobile davit on roof
the trolley is
ensured by
two trolleys taking
up the tilting
The slewing Powered trolleys are available for larger surfaces of facade.
jib allows an
moment thanks all-around The trolley is powered by a battery, no need to provide
to the aluminum care of the electrical power plugs on the roof, or by main supply.
facade The trolley is controlled from the cradle by an HF transmission.
Safeaccess rail
fixed on posts RFC004
or brackets to
the structure
2071 m
of the roof or
the parapet. Adjustable
In parking position,
the mast is tilted
2315 m 1213 m
horizontally and
then removed
from the trolley.
In service, the
jib is pivoted on
the roof side 1320 m 612 m
1284 m
to hang the
synthetic ropes
at the 2 anchor Mobile davit on parapet
points.
RFC003 / RFC001
1000 m
1157 m
1839 m
782 m
55
Luxembourg
FALLPROTEC SA
Spain
FALLPROTEC SL
www.fallprotec.com