Professional Documents
Culture Documents
Pm210011-Nui900-Ese-00001 - 02 - Nui-Material Technical Submittal Panel Boards (Nesma United Industry)
Pm210011-Nui900-Ese-00001 - 02 - Nui-Material Technical Submittal Panel Boards (Nesma United Industry)
Review
Project Name: NGHP – Green Hydrogen Element (GHE) AP Project No.: PM210011
Code:
3rd Party/Vendor Name: NUI - Nesma United Industries Unit Code: 900 - Common Buildings
COMMENTS RESPONSE
Review
Project Name: NGHP – Green Hydrogen Element (GHE) AP Project No.: PM210011
Code:
3rd Party/Vendor Name: NUI - Nesma United Industries Unit Code: 900 - Common Buildings
COMMENTS RESPONSE
Review
Project Name: NGHP – Green Hydrogen Element (GHE) AP Project No.: PM210011
Code:
3rd Party/Vendor Name: NUI - Nesma United Industries Unit Code: 900 - Common Buildings
COMMENTS RESPONSE
08 Page 7 Project Client name to be : NEOM GREEN HYDROGEN COMPANY Comply, Please find here attached revised drawings. Yes Closed
Separate excel file shall be submitted which shall include AP clause no., clause
statement, deviations/clarification, remarks, etc. Deviation & Clarification file shall
09 Page 17 Noted. Yes Closed
clearly identify Deviations or clarification with proper technical justification. (Type for
all point where not complying)
5R 3C+N x300/150 as per Doc. no. PM210011-900-ES1-00002 Comply, Please find here attached revised drawings (NPB-DWG-
11 Page 35 Yes Closed
Vendor to suitably consider the termination arrangement inside panel. 2210009-01, Page 05).
2R 3C+NX240/120 as per Doc. no. PM210011-900-ES1-00002 Comply, Please find here attached revised drawings (NPB-DWG-
12 Page 43 Yes Closed
Vendor to suitably consider the termination arrangement inside panel. 2210009-02, Page 05).
DOCUMENT COVERSHEET
Document Information
Project No: PM210011 Project Name: NEOM GREEN HYDROGEN ELEMENTS
Project Doc No: PM210011-NUI900-ESE-00001 Rev: 02
Document Title NUI-MATERIAL TECHNICAL SUBMITTAL PANEL BOARDS (NESMA UNITED INDUSTRIES)
VDR Code(s)
Tag No(s):(1):
Note 1 – For multiple Tag No: refer to page 2
Review Status
Sign.
Status Code: CODE-4
Date:
Status Code Legend
Code 1 Reviewed by Air Products – REJECTED Resubmit for Review
Code 2 Reviewed by Air Products – COMMENTS AS NOTED Resubmit for Review
Code 4 Reviewed by Air Products – NO COMMENTS, No Further Submittal Required Unless Drawing/Document is Revised
Code 5 ACCEPTED FOR INFORMATION ONLY
Vendor is not relieved of responsibility for accuracy of dimensions, performance, design, design of details or any code requirements. Further, review by
Air Products does not relieve Vendor of responsibility or liability, or from furnishing material in conformance with the contract, purchase order, or
other agreement. Air Products’ review shall not be construed as an Approval by Air Products of such documents or an opinion by Air Products that such
documents are true and accurate
PM210011-NUI900-ESE-00001_02 4 of 154
NEOM GREEN HYDROGEN ELEMENT
REVISION HISTORY
=======================
PM210011-NUI900-ESE-00001_02 5 of 154
PM210011-NUI900-ESE-00001_02 6 of 154
PM210011-NUI900-ESE-00001_02 7 of 154
PM210011-NUI900-ESE-00001_02 8 of 154
PM210011-NUI900-ESE-00001_02 9 of 154
PM210011-NUI900-ESE-00001_02 10 of 154
PM210011-NUI900-ESE-00001_02 11 of 154
PANEL BOARD FACTORY
CLIENT : NEOM
SUBMITTED BY
Nesma United Industries Co. Ltd. (Previously - Nesma Trading Co. Ltd.)
Aug-23
Rev-2
PM210011-NUI900-ESE-00001_02 12 of 154
Project Name NEOM GREEN HYDROGEN PROJECT - U900
Client NEOM
INDEX
Section Description
1 Compliance Statement
2 Drawings
3 Product Catalogues
4 Sample Test Certificates
************
PM210011-NUI900-ESE-00001_02 13 of 154
1
Compliance Statement
PM210011-NUI900-ESE-00001_02 14 of 154
PM210011-NUI900-ESE-00001_02 15 of 154
PM210011-NUI900-ESE-00001_02 16 of 154
PM210011-NUI900-ESE-00001_02 17 of 154
PM210011-NUI900-ESE-00001_02 18 of 154
PM210011-NUI900-ESE-00001_02 19 of 154
PM210011-NUI900-ESE-00001_02 20 of 154
PM210011-NUI900-ESE-00001_02 21 of 154
PM210011-NUI900-ESE-00001_02 22 of 154
PM210011-NUI900-ESE-00001_02 23 of 154
PM210011-NUI900-ESE-00001_02 24 of 154
PM210011-NUI900-ESE-00001_02 25 of 154
PM210011-NUI900-ESE-00001_02 26 of 154
PM210011-NUI900-ESE-00001_02 27 of 154
PM210011-NUI900-ESE-00001_02 28 of 154
PM210011-NUI900-ESE-00001_02 29 of 154
PM210011-NUI900-ESE-00001_02 30 of 154
PM210011-NUI900-ESE-00001_02 31 of 154
PM210011-NUI900-ESE-00001_02 32 of 154
PM210011-NUI900-ESE-00001_02 33 of 154
2
Drawings
PM210011-NUI900-ESE-00001_02 34 of 154
1 2 3 4 5 6 7 8
A A
B B
C C
D D
E E
QTY: 01No.
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
MATERIAL : ALUM.
TO LINKS SELECTOR SWITCH/PUSH BUTTONS/LAMPS
COPPER APPARATUS DEFINED
ACCESS :
SYSTEM : PARTIC DIMENSIONS
REAR (CABLING) PUSH BUTTONS :
CONSTANT SECTION H V EXTENSION OF
FRONT (CABLING)
DECREASING H V ON OFF L.TEST RESET
LEFT SIDE/RIGHT SIDE SIMILAR TO
TIN PLATED H V SPECIFICATION
D ENTRY : D
WITH COLOUR CODED PVC SLEEVE LAMPS :
TOP (BY CABLES) DEVIATION
NEUTRAL : PE : BOTTOM (BY CABLES) RED GREEN YELLOW BLUE LOOSE MATERIAL
NOT DISTRIBUTED HORIZONTAL ACCESSORIES :
SCREWS _______________
SAME SECTION AS PHASES VERTICAL SELECTOR SWITCH :
HALF SECTION HALF SECTION GLAND PLATES
HOA ON/OFF AM. SS VM. SS DRAWINGS :
CABLE GLAND
SUPPLY OF AUXILIARIES SHROUDING :
E For Approval AS BUILT E
CABLE ENDS OTHERS :
VOLTAGE : ORIGIN :
FOR PRODUCTION
AUXILIARY WIRING ________________________
-ALL CIRCUITS 230 VAC / 24V DC CONTROL TRANFR.
-CONTROL 230 VAC / 24V DC FROM POWER SUPPLY SEC.VOLTAGE : 2.50 2.50 SQ.MM QUANTITY : 1 No.
-SIGNALLING 230 V AC,60HZ. FROM BUSBAR CURRENT : 2.50 2.50 SQ.MM INDICATING INSTRUMENT (METERS) REMARKS
POWER CKT.: RYB&N Y/G (GROUNDING)
INSTRUMENTS :
F CLIMATIC CONDITION CT: RYB&N F
SIZE 96 X 96 SIZE 72 X 72
ALARM: GRAY
TYPE OF CLIMATE : NORMAL
OTHERS :
TYPE OF ATMOSPHERE : ORDINARY TO SUIT DESERT
MARKING OF CIRCUITS
CONDITIONS
POWER : STAND R,Y,B,N
POLLUTION RISKS :
AUXILIARY : LOCAL END METER RELAY :
-MOUNTING INDOOR OUTDOOR
BOTH ENDS
G -AMBIENT TEMP. 50°C G
COMPOSED
-RELATIVE HUMIDITY 50% AT 50°C
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A
LEGENDS & SYMBOL A
S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION
X1
AIR CIRCUIT BREAKER
1 ACB 10 INDICATING LAMP
SURGE PROTECTION DEVICE
(ACB) 19 28
X2
B B
T2 T4 T6
A1
MOULDED CASE CIRCUIT BREAKER
2 (MCCB) 11 CONTACTOR / RELAY COIL 20 CONTROL FUSE 29
A2
T1 T3 T5
MANUAL
AUTO
OFF
HAND/OFF/AUTO
3 MCB 12 CURRENT TRANSFORMER 21
3 3
30
C SELECTOR SWITCH C
4 4
21 A
QM-OF
L3
L2
L1
MCCB AUXILIARY CONTACTS AMMETER
0
4 13 4 10
22 SPACE HEATER 31
24 22
1 3 5 11
WITH SELECTOR SWITCH
D D
C12 V
L3-L1
L2-L3
L1-L2
L1-N
L2-N
L3-N
VOLTMETER
5
0
MCCB SHUNT TRIP CONTACTS
MX 14 4 10
L1 L2 L3
A1 S1 S2 S1 S2 S1 S2
DIGITAL MULTIFUNCTION TERMINALS
7 T1 24H TIMER 16 L1 L2 L3
25 34
MFM METER
A2 V1 V2 V3 VN 0V - +
F F
CBCT
L 1
2
CBCT
N 2 6 9 7
1 8
XX
9 XX AUXILIARY CONTACTS 18 27 36
480V
230V
CONTROL TRANSFORMER
7 9
G 2 G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
100mm
(CELL AS SEM BLY BUILDING)
(400/230V,3PH.,4W,60Hz.)
C06
A A
POWER ON POWER ON POWER ON
R Y B
T1 T2
Q1 Q2
AMMET ER V OL T M E T ER
A 00
00 V 00
00
Q1 Q2
300 300
00 00
Electric
Schneider
T3 T4
Elect ric
Elect ric
Sc hneider
Sc hneider
Q3 Q4
Q3 Q4
T5
Electric
Schneider
Elect ric
Elect ric
Sc hneider
Sc hneider
Q5
Q5 Q6
Electric
Schneider
Elect ric
Sc hneider
Q7 Q8
B Q7 Q8 B
T9 Q9 Q10 T10
Q9 Q10
Q11 Q12
DANG ER ﺧﻄﺮ
Q11 Q12
2000
Q13 Q14
Q13 Q14
C C
CT CT CT
TH
FU1
FU2
FU3
FU4
FU4
E1 E2 E3 E4 E5
QM
N QM
E6 E7
D D
300mm
(DRAWING POCKET INSIDE DOOR )
E
Earth Stud
ACH
E E
475
GLAND PLATE (CUSTOMIZED)
C06
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
1x30x10mm Busbar 1x30x10mm Busbar 1x20x5mm Busbar 1x15x5mm Busbar 1x15x5mm Busbar
L3
1ASS
AMMETER
L2
SELECTOR SWITCH
L1
0
B B
S2
1CT1
S1
400/5A 9
A
4
S2
1CT2
S1 2
400/5A 5
S2
1CT3
S1
400/5A 1
C C
C04
C04
C04
C04
PE
L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3
1 11 11 11 11
14 12 14 12 14 12 14 12
3
V
1FU1-1FU3 4
10 3 4 5 6 7 8 9 10
X1 X1 X1 6 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3
TRIP STATUS TRIP STATUS TRIP STATUS TRIP STATUS
D X2 X2 X2 D
RED YELLOW BLUE
11 Q1 Q2 Q3 Q4
1HP1 1HP2 1HP3
L3-L1 160AT/160AF TP 160AT/160AF TP 100AT/100AF TP 100AT/100AF TP
L2-L3
MCCB (TMD) MCCB (TMD) MCCB (TMD) MCCB (TMD)
QM 1VSS L1-L2
QM-SDE
14 12
E E
N L1 L2 L3
1 2 E1 E2 E3 E4
TRIP STATUS
C04
T1 T2 T3 T4
F F
N L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3
G
400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W G
Fed From : SWGR-900-412E (900-B906) Cable Size : 1-3Cx120 mm2 Cable Size : 1-3Cx120 mm2 Cable Size : 1-3Cx70 mm2 Cable Size : 1-3Cx70 mm2
Cable Size : 5R-3C+Nx300mm2 + 150mm2
E - 1bx30x5mm
ISSUE REVISION DATE PROJECT: DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
NEOM GREEN HYDROGEN PROJECT - U900
01 For Approval 08-02-23 PANEL BOARD FACTORY DWG NO: NPB-DWG-2210009-01
PR PR 08-02-23
H TITLE: MDB-900-B917-E (CELL ASSEMBLY BUILDING) H
02 Revised As Per Comments 05-03-23 P.O. BOX NO. 3402, AL KHOBAR, SCALE: N.T.S
CHECKED BY: APPROVED BY: DATE
03 Revised As Per Comments 16-07-23 SAUDI ARABIA CLIENT: NEOM GREEN HYDROGEN COMPANY SHEET NO.
TELEPHONE NO. +966-3-8350371 GH GH
CONTRACTOR: 08-02-23
NESMA UNITED IND. - BLD
FAX NO. +966-3-865 6126 PM210011-NUI900-ESE-00001_02 39 5of
OF 9
154
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1x15x5mm Busbar 1x15x5mm Busbar 1x20x5mm Busbar 1x20x5mm Busbar 1x20x5mm Busbar 1x20x5mm Busbar
B B
C C
C04
C04
C04
C04
C04
L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3
11 11 11 11 11
14 12 14 12 14 12 14 12 14 12
11 12 13 14 15 16 17 18 19 20
L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3
TRIP STATUS TRIP STATUS TRIP STATUS TRIP STATUS TRIP STATUS
D D
Q5 Q6 Q7 Q8 Q9 Q10
100AT/100AF TP 160AT/160AF 4P 100AT/100AF 4P 125AT/160AF 4P 125AT/160AF 4P
MCCB (TMD) MCCB (TMD) MCCB (TMD) MCCB (TMD) MCCB (TMD)
25kA 25kA 25kA 25kA 25kA
E5 E9 E10
E E
T5 T9 T10
F F
L1 L2 L3 L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3
ACCU-01B (STANDBY) SPACE (100A) SPARE SPARE HUMIDIFIER FOR AHU-01A (DUTY) HUMIDIFIER FOR AHU-01B (STANDBY)
G
400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W G
Cable Size : 1-3Cx70 mm2 Cable Size : N/A Cable Size : N/A Cable Size : 1-4Cx50 mm2 Cable Size : 1-4Cx50 mm2
E - 1bx30x5mm
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
1FU4(4A)
B B
Flexible Wire - 25mm2,65A 1
11
TH1 DS-1
THERMOSTAT 12
2
X1
PL-1
C ACH1
C
C04
C04
C04
C04
X2
N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 QSPD
11 11 11 11
63A 3P Fuse
QM-SDE QM-SDE QM-SDE QM-SDE
14 12 14 12 14 12 14 12
21 22 23 24 25 26 27 28
N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3
TRIP STATUS TRIP STATUS TRIP STATUS TRIP STATUS
D D
Q11 Q12 Q13 Q14
80AT/100AF 4P 63AT/100AF 4P 63AT/100AF 4P 40AT/100AF 4P
MCCB (TMD) MCCB (TMD) MCCB (TMD) MCCB (TMD)
25kA 25kA 25kA 25kA
SPD1
E E
F F
N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3
G
400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W G
Cable Size : N/A Cable Size : 4CX50mm2 + 1CX35mm2 (G) Cable Size : N/A Cable Size : 4CX25mm2 + 1CX16mm2 (G)
E - 1bx30x5mm
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
B B
1FU5
L
T1
C CBCT 8 C
E1
7 9
S2 S1
E1
230V AC
D 2 D
21
6 9 7 Q1-OF2
24 22
E E
C2
MX
C1
N
G G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
BILL OF QUANTITY
A ITEM TAG CAT. REF. No. DESCRIPTION RATING QTY MANUFACTURER A
1 QM LV432677 / C40F42D400 + 29450 MCCB 4P 400AT/400AF 36kA with Micrologic 2.3 Trip Unit 400A 1 Schneider Electric
2 Q1,Q2 LV430310 / C16B3TM160C + 29450 Circuit breaker, ComPact NSX160B, 25kA/415VAC, TMD trip unit 160A, 3 poles 3d 160A 2 Schneider Electric
3 Q3,Q4,Q5 LV429550 / C10B3TM100C + 29450 Circuit breaker, ComPact NSX100B, 25kA/415VAC, TMD trip unit 100A, 3 poles 3d 100A 3 Schneider Electric
4 Q7 LV430320 / C16B6TM160C + 29450 Circuit breaker, ComPact NSX160B, 25kA/415VAC, TMD trip unit 160A, 4 poles 3d 160A 1 Schneider Electric
B 5 Q8 LV429560 / C10B6TM100C + 29450 Circuit breaker, ComPact NSX100B, 25kA/415VAC, TMD trip unit 100A, 4 poles 3d 100A 1 Schneider Electric B
6 Q9,Q10 LV430321 / C16B6TM125C + 29450 Circuit breaker, ComPact NSX160B, 25kA/415VAC, TMD trip unit 125A, 4 poles 3d 125A 2 Schneider Electric
7 Q11 LV429561 / C10B6TM080C + 29450 Circuit breaker, ComPact NSX100B, 25kA/415VAC, TMD trip unit 80A, 4 poles 3d 80A 1 Schneider Electric
8 Q12,Q13 LV429562 / C10B6TM063C + 29450 Circuit breaker, ComPact NSX100B, 25kA/415VAC, TMD trip unit 63A, 4 poles 3d 63A 2 Schneider Electric
9 Q14 LV429564 / C10B6TM040C + 29450 Circuit breaker, ComPact NSX100B, 25kA/415VAC, TMD trip unit 40A, 4 poles 3d 40A 1 Schneider Electric
C 10 1HP1-1HP3 XB7EV04MP/05MP/06MP Pilot Light - Integral LED - 230V AC (Red/Yellow/Blue) 230V AC 3 Schneider Electric C
16 Encl NSYSF2012602DP Spacial SF enclosure with mounting plate - assembled - 2000x1200x600 mm IP55 1 Schneider Electric
17 1CT1-1CT3 - Current Transformer 400/5A 4 Elmex
18 A - Analog Ammeter 0-400A, 96mmx96mm 0-400A 1 Elmex
19 V - Analog Voltmeter 0-500V, 96mmx96mm 0-500V 1 Elmex
E 20 ASS - Ammeter Selector Switch - 1 Selec E
26
27
28
29
G 30 G
31
32
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
B B
C C
D D
E E
QTY: 01No.
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
MATERIAL : ALUM.
TO LINKS SELECTOR SWITCH/PUSH BUTTONS/LAMPS
COPPER APPARATUS DEFINED
ACCESS :
SYSTEM : PARTIC DIMENSIONS
REAR (CABLING) PUSH BUTTONS :
CONSTANT SECTION H V EXTENSION OF
FRONT (CABLING)
DECREASING H V ON OFF L.TEST RESET
LEFT SIDE/RIGHT SIDE SIMILAR TO
TIN PLATED H V SPECIFICATION
D ENTRY : D
WITH COLOUR CODED PVC SLEEVE LAMPS :
TOP (BY CABLES) DEVIATION
NEUTRAL : PE : BOTTOM (BY CABLES) RED GREEN YELLOW BLUE LOOSE MATERIAL
NOT DISTRIBUTED HORIZONTAL ACCESSORIES :
SCREWS _______________
SAME SECTION AS PHASES VERTICAL SELECTOR SWITCH :
HALF SECTION HALF SECTION GLAND PLATES
HOA ON/OFF AM. SS VM. SS DRAWINGS :
CABLE GLAND
SUPPLY OF AUXILIARIES SHROUDING :
E For Approval AS BUILT E
CABLE ENDS OTHERS :
VOLTAGE : ORIGIN :
FOR PRODUCTION
AUXILIARY WIRING ________________________
-ALL CIRCUITS 230 VAC / 24V DC CONTROL TRANFR.
-CONTROL 230 VAC / 24V DC FROM POWER SUPPLY SEC.VOLTAGE : 2.50 2.50 SQ.MM QUANTITY : 1 No.
-SIGNALLING 230 V AC,60HZ. FROM BUSBAR CURRENT : 2.50 2.50 SQ.MM INDICATING INSTRUMENT (METERS) REMARKS
POWER CKT.: RYB&N Y/G (GROUNDING)
INSTRUMENTS :
F CLIMATIC CONDITION CT: RYB&N F
SIZE 96 X 96 SIZE 72 X 72
ALARM: GRAY
TYPE OF CLIMATE : NORMAL
OTHERS :
TYPE OF ATMOSPHERE : ORDINARY TO SUIT DESERT
MARKING OF CIRCUITS
CONDITIONS
POWER : STAND R,Y,B,N
POLLUTION RISKS :
AUXILIARY : LOCAL END METER RELAY :
-MOUNTING INDOOR OUTDOOR
BOTH ENDS
G -AMBIENT TEMP. 50°C G
COMPOSED
-RELATIVE HUMIDITY 50% AT 50°C
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A
LEGENDS & SYMBOL A
S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION
X1
AIR CIRCUIT BREAKER
1 ACB 10 INDICATING LAMP
SURGE PROTECTION DEVICE
(ACB) 19 28
X2
B B
T2 T4 T6
A1
MOULDED CASE CIRCUIT BREAKER
2 (MCCB) 11 CONTACTOR / RELAY COIL 20 CONTROL FUSE 29
A2
T1 T3 T5
MANUAL
AUTO
OFF
HAND/OFF/AUTO
3 MCB 12 CURRENT TRANSFORMER 21
3 3
30
C SELECTOR SWITCH C
4 4
21 A
QM-OF
L3
L2
L1
MCCB AUXILIARY CONTACTS AMMETER
0
4 13 4 10
22 SPACE HEATER 31
24 22
1 3 5 11
WITH SELECTOR SWITCH
D D
C12 V
L3-L1
L2-L3
L1-L2
L1-N
L2-N
L3-N
VOLTMETER
5
0
MCCB SHUNT TRIP CONTACTS
MX 14 4 10
L1 L2 L3
A1 S1 S2 S1 S2 S1 S2
DIGITAL MULTIFUNCTION TERMINALS
7 T1 24H TIMER 16 L1 L2 L3
25 34
MFM METER
A2 V1 V2 V3 VN 0V - +
F F
CBCT
L 1
2
CBCT
N 2 6 9 7
1 8
XX
9 XX AUXILIARY CONTACTS 18 27 36
480V
230V
CONTROL TRANSFORMER
7 9
G 2 G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
100mm
(CELL AS SEM BLY BUILDING)
(400/230V,3PH.,4W,60Hz.)
A A
C06
POWER ON POWER ON POWER ON
R Y B Q1 Q2 Q1 Q2
AMMET ER V OL T M E T ER
A 00
00 V 00
00
300 300
00 00
Q3 Q4 Q3 Q4
Q5 Q6 Q5 Q6
B T7 T8 B
Q7 Q8 Q7 Q8
T9
Elect ric
Elect ric
Electric
Schneider
Sc hneider
Sc hneider
Q9 Q9
Q10 Q10
Elect ric
Electric
Schneider
Sc hneider
1800
DANG ER ﺧﻄﺮ
CT CT CT
TH
FU1
FU3
FU2
FU4
FU4
C C
QM E7 E8 E9
N QM
250mm
D D
(DRAWING POCKET INSIDE DOOR )
Earth Stud
E ACH
E E
FRONT VIEW INTERNAL VIEW INTERNAL VIEW SIDE VIEW
(WITH FRONT COVER)
NOTES:
1. BUSBAR : TIN PLATED COPPER 1075
2. ENCLOSURE:
- FRAME WORK COMPONENTS : 2mm
- DOOR, BACK & SIDE COVER : 1.5mm DANGER ﺧﻄﺮ
12.
F - PLINTH : 3mm HAZAR D OF ELECTRICAL SHOCK OR BURN
F
275
GLAND PLATE (CUSTOMIZED)
5
TURN O FF POWER TO THIS EQUIPMENT
BEFORE WORKING INSIDE
3. PANEL WEIGHT : 435Kg (APPX.)
ﺧﻄـــــﺮ اﻟﺼـــــﺪﻣﺔ اﻟﮑﮫﺮﺑﺎﺋﯿـــــﺔ أو اﻻﺣـــــﺘﺮاق
4. PANEL MOUNTING : FLOOR MOUNTED TYPE إﻳﻘـــﺎف اﻟﻄﺎﻗـــﺔ ﻟﮫـــﺬه اﻟﻤﻌــــﺪات
ﻗﺒــــﻞ ااﻟﻌﻤــــﻞ ﺑﺎﻟــــﺪاﺧﻞ
DANGER LABEL
C06
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
1x30x10mm Busbar
L3
1ASS
AMMETER
L2 1x20x5mm Busbar 1x20x5mm Busbar 1x15x5mm Busbar 1x15x5mm Busbar
SELECTOR SWITCH
L1
0
B B
S2
1CT1
S1
400/5A 9
A
4
S2
1CT2
S1 2
400/5A 5
S2
1CT3
S1
400/5A 1
C C
C04
C04
C04
C04
PE
N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3
1 11 11 11 11
14 12 14 12 14 12 14 12
3
V
1FU1-1FU3 4
10 3 4 5 6 7 8 9 10
X1 X1 X1 6 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3
TRIP STATUS TRIP STATUS TRIP STATUS TRIP STATUS
D X2 X2 X2 D
RED YELLOW BLUE
11 Q1 Q2 Q3 Q4
1HP1 1HP2 1HP3
L3-L1 160AT/160AF 4P 160AT/160AF 4P 63AT/100AF 4P 80AT/100AF 4P
L2-L3
MCCB (TMD) MCCB (TMD) MCCB (TMD) MCCB (TMD)
C04
QM 1VSS L1-L2
QM-SDE
Set @ 300A 14 12
E E
N L1 L2 L3
1 2
TRIP STATUS
F F
N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3 N L1 L2 L3
G
400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W G
Fed From : SWGR-900-412A (900-B906) Cable Size : 4CX185mm2 + 1CX70mm2 (G) Cable Size : N/A Cable Size : 4CX50mm2 + 1CX35mm2 (G) Cable Size : 4CX50mm2 + 1CX35mm2 (G)
Cable Size : 2R-3C+Nx240mm2 + 120mm2
E - 1bx30x5mm
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
B B
C C
C04
C04
C04
C04
C04
N L1 L2 L3 N L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3
11 11 11 11 11
14 12 14 12 14 12 14 12 14 12
11 12 13 14 15 16 17 18 19 20
N L1 L2 L3 N L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3
TRIP STATUS TRIP STATUS TRIP STATUS TRIP STATUS TRIP STATUS
D D
Q5 Q6 Q7 Q8 Q9 Q4
63AT/100AF 4P 40AT/100AF 4P 40AT/100AF TP 40AT/100AF TP 40AT/100AF TP
MCCB (TMD) MCCB (TMD) MCCB (TMD) MCCB (TMD) MCCB (TMD)
25kA 25kA 25kA 25kA 25kA
E7 E8 E9
E E
T7 T8 T9
F F
N L1 L2 L3 N L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3
SPARE SPARE EWH-01 (INTERMITENT DUTY) EWH-02 (INTERMITENT DUTY) EWH-03 (INTERMITENT DUTY) SPACE (100A)
G
400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W 400V/230V, 60Hz, AC 3ɸ 4W G
Cable Size : N/A Cable Size : N/A Cable Size : 1-3Cx16 mm2 Cable Size : 1-3Cx16 mm2 Cable Size : 1-3Cx16 mm2
E - 1bx30x5mm
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
1FU4(4A)
B B
1
11
TH1 DS-1
THERMOSTAT 12
2
X1 1FU5
L
PL-1
C ACH1
X2
C
T7
CBCT 8
E7
7 9
D S2 S1 D
E7
230V AC
2
21
6 9 7 Q7-OF2
E E
24 22
C2
F F
MX
C1
N
G G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
BILL OF QUANTITY
A ITEM TAG CAT. REF. No. DESCRIPTION RATING QTY MANUFACTURER A
1 QM LV432677 / C40F42D400 + 29450 MCCB 4P 400AT/400AF 36kA with Micrologic 2.3 Trip Unit (Set @ 300A) 400A 1 Schneider Electric
2 Q1,Q2 LV430320 / C16B6TM160C + 29450 Circuit breaker, ComPact NSX160B, 25kA/415VAC, TMD trip unit 160A, 4 poles 3d 160A 2 Schneider Electric
3 Q3,Q5 LV429562 / C10B6TM063C + 29450 Circuit breaker, ComPact NSX100B, 25kA/415VAC, TMD trip unit 63A, 4 poles 3d 63A 2 Schneider Electric
4 Q4 LV429561 / C10B6TM080C + 29450 Circuit breaker, ComPact NSX100B, 25kA/415VAC, TMD trip unit 80A, 4 poles 3d 80A 1 Schneider Electric
B 5 Q6 LV429564 / C10B6TM040C + 29450 Circuit breaker, ComPact NSX100B, 25kA/415VAC, TMD trip unit 40A, 4 poles 3d 40A 1 Schneider Electric B
6 Q7,Q8,Q9 LV429554 / C10B3TM040C + 29450 Circuit breaker, ComPact NSX100B, 25kA/415VAC, TMD trip unit 40A, 3 poles 3d 40A 3 Schneider Electric
7 1HP1-1HP3 XB7EV04MP/05MP/06MP Pilot Light - Integral LED - 230V AC (Red/Yellow/Blue) 230V AC 3 Schneider Electric
8 1FU1-1FU5 A9N15636 SP Control Fuse Carrier 230V AC 5 Schneider Electric
9 TH1 NSYCCOTHC ClimaSys CC - simple thermostat 250V - range of temperature 0…60°C - NC - 230V AC 1 Schneider Electric
C 10 ACH1 NSYCR55WU2 ClimaSys PTC heating resistance 55W, 110-250V 230V AC 1 Schneider Electric C
11 E7-E9 56173 Residual current protection relay, VigiPacT RH99M, 30mA-30A, 220/240VAC 50/60Hz 30mA-30A 3 Schneider Electric
12 T7-T9 50438 Closed toroid A type, VigiPacT, Vigilohm, PA50, inner diameter 50mm, rated current 85A - 3 Schneider Electric
13 Encl NSYSM1812402DP Spacial SM compact enclosure with mounting plate - 1800x1200x400 mm IP55 1 Schneider Electric
14 1CT1-1CT3 - Current Transformer 400/5A 4 Elmex
D 15 A - Analog Ammeter 0-600A, 96mmx96mm 0-400A 1 Elmex D
21
22
23
24
F 25 F
26
27
28
29
G 30 G
31
32
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
B B
C C
D D
E E
QTY: 01No.
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
MATERIAL : ALUM.
TO LINKS SELECTOR SWITCH/PUSH BUTTONS/LAMPS
COPPER APPARATUS DEFINED
ACCESS :
SYSTEM : PARTIC DIMENSIONS
REAR (CABLING) PUSH BUTTONS :
CONSTANT SECTION H V EXTENSION OF
FRONT (CABLING)
DECREASING H V ON OFF L.TEST RESET
LEFT SIDE/RIGHT SIDE SIMILAR TO
TIN PLATED H V SPECIFICATION
D ENTRY : D
WITH COLOUR CODED PVC SLEEVE LAMPS :
TOP (BY CABLES) DEVIATION
NEUTRAL : PE : BOTTOM (BY CABLES) RED GREEN YELLOW BLUE LOOSE MATERIAL
NOT DISTRIBUTED HORIZONTAL ACCESSORIES :
SCREWS _______________
SAME SECTION AS PHASES VERTICAL SELECTOR SWITCH :
HALF SECTION HALF SECTION GLAND PLATES
HOA ON/OFF AM. SS VM. SS DRAWINGS :
CABLE GLAND
SUPPLY OF AUXILIARIES SHROUDING :
E For Approval AS BUILT E
CABLE ENDS OTHERS :
VOLTAGE : ORIGIN :
FOR PRODUCTION
AUXILIARY WIRING ________________________
-ALL CIRCUITS 230 VAC / 24V DC CONTROL TRANFR.
-CONTROL 230 VAC / 24V DC FROM POWER SUPPLY SEC.VOLTAGE : 2.50 2.50 SQ.MM QUANTITY : 1 No.
-SIGNALLING 230 V AC,60HZ. FROM BUSBAR CURRENT : 2.50 2.50 SQ.MM INDICATING INSTRUMENT (METERS) REMARKS
POWER CKT.: RYB&N Y/G (GROUNDING)
INSTRUMENTS :
F CLIMATIC CONDITION CT: RYB&N F
SIZE 96 X 96 SIZE 72 X 72
ALARM: GRAY
TYPE OF CLIMATE : NORMAL
OTHERS :
TYPE OF ATMOSPHERE : ORDINARY TO SUIT DESERT
MARKING OF CIRCUITS
CONDITIONS
POWER : STAND R,Y,B,N
POLLUTION RISKS :
AUXILIARY : LOCAL END METER RELAY :
-MOUNTING INDOOR OUTDOOR
BOTH ENDS
G -AMBIENT TEMP. 50°C G
COMPOSED
-RELATIVE HUMIDITY 50% AT 50°C
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A
LEGENDS & SYMBOL A
S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION
X1
AIR CIRCUIT BREAKER
1 ACB 10 INDICATING LAMP
SURGE PROTECTION DEVICE
(ACB) 19 28
X2
B B
T2 T4 T6
A1
MOULDED CASE CIRCUIT BREAKER
2 (MCCB) 11 CONTACTOR / RELAY COIL 20 CONTROL FUSE 29
A2
T1 T3 T5
MANUAL
AUTO
OFF
HAND/OFF/AUTO
3 MCB 12 CURRENT TRANSFORMER 21
3 3
30
C SELECTOR SWITCH C
4 4
21 A
QM-OF
L3
L2
L1
MCCB AUXILIARY CONTACTS AMMETER
0
4 13 4 10
22 SPACE HEATER 31
24 22
1 3 5 11
WITH SELECTOR SWITCH
D D
C12 V
L3-L1
L2-L3
L1-L2
L1-N
L2-N
L3-N
VOLTMETER
5
0
MCCB SHUNT TRIP CONTACTS
MX 14 4 10
L1 L2 L3
A1 S1 S2 S1 S2 S1 S2
DIGITAL MULTIFUNCTION TERMINALS
7 T1 24H TIMER 16 L1 L2 L3
25 34
MFM METER
A2 V1 V2 V3 VN 0V - +
F F
CBCT
L 1
2
CBCT
N 2 6 9 7
1 8
XX
9 XX AUXILIARY CONTACTS 18 27 36
480V
230V
CONTROL TRANSFORMER
7 9
G 2 G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
DB-B917-N1
(40 0/230 V, 3PH , 4W, 60 Hz)
Busbar Assembly
B B
DANGER ﺧﻄﺮ
600
Ele ct ric
QM E lec tric
QM
S ch ne id er
Sch ne id e r
E N
C C
E E
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
LOAD DESCRIPTION BREAKER BREAKER LOAD DESCRIPTION
1 LTG. PRE-ASSEMBLY AREA & CELL WORKSHOP-1 16A SP MCB,10KA 16A SP MCB,10KA LTG. OFF-2, CORRIDOR, AIR LOCK, MALE PRAYER, LUNCH RM, FEMALE PRAYER & TOILET, CHANGE RM 2
EARTH BAR
NEUTRAL BAR
3 LTG. CELL WORKSHOP-2 & SWITCHGEAR ROOM 16A SP MCB,10KA 16A SP MCB,10KA LTG. OFF-1&3 TO 7, TEL. RM & MALE TOILET, AIRLOCK 4
5 LIGHTING STORAGE AREA 16A SP MCB,10KA 16A SP MCB,10KA LTG. - BUILING PRIMETER THROUGH LCP-B917-E1 6
7 SPARE 16A SP MCB,10KA 16A SP MCB,10KA SPARE 8
9 LTG. BUILDING PROMETER THROUGH LCP-B917-E1 16A SP MCB,10KA 16A SP MCB,10KA SPARE 10
11 LTG. BUILDING PROMETER THROUGH LCP-B917-E1 16A SP MCB,10KA 16A SP MCB,10KA LTG. - BUILING PRIMETER THROUGH LCP-B917-E1 12
B B
C C
D D
QM
40AT/100AF TP
MCCB, 25kA
(TMD)
E E
F F
N R Y B
G Incoming Supply G
400V/230V, 60Hz, AC 3ɸ 4W
Fed From : MDB-900-B917-E
Cable Size : 4CX25mm2 + 1CX16mm2 (G)
ISSUE REVISION DATE PROJECT: DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
NEOM GREEN HYDROGEN PROJECT - U900
01 For Approval 08-02-23 PANEL BOARD FACTORY DWG NO: NPB-DWG-2210009-03
PR PR 08-02-23
H TITLE: DB-B917-E1 (CELL ASSEMBLY BUILDING) H
02 Revised As Per Comments 05-03-23 P.O. BOX NO. 3402, AL KHOBAR, SCALE: N.T.S
CHECKED BY: APPROVED BY: DATE
03 Revised As Per Comments 16-07-23 SAUDI ARABIA CLIENT: NEOM GREEN HYDROGEN COMPANY SHEET NO.
TELEPHONE NO. +966-3-8350371 GH GH
CONTRACTOR: 08-02-23
NESMA UNITED IND. - BLD
FAX NO. +966-3-865 6126 PM210011-NUI900-ESE-00001_02 56 5of
OF 6
154
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
A BILL OF QUANTITY A
5
6
7
8
C C
9
10
D D
E E
F F
G G
ISSUE REVISION DATE PROJECT: DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
NEOM GREEN HYDROGEN PROJECT - U900
01 For Approval 08-02-23 PANEL BOARD FACTORY DWG NO: NPB-DWG-2210009-03
PR PR 08-02-23
H TITLE: DB-B917-E1 (CELL ASSEMBLY BUILDING) H
02 Revised As Per Comments 05-03-23 P.O. BOX NO. 3402, AL KHOBAR, SCALE: N.T.S
CHECKED BY: APPROVED BY: DATE
03 Revised As Per Comments 16-07-23 SAUDI ARABIA CLIENT: NEOM GREEN HYDROGEN COMPANY SHEET NO.
TELEPHONE NO. +966-3-8350371 GH GH
CONTRACTOR: 08-02-23
NESMA UNITED IND. - BLD
FAX NO. +966-3-865 6126 PM210011-NUI900-ESE-00001_02 57 6of
OF 6
154
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
A A
B B
C C
D D
E E
QTY: 01No.
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
MATERIAL : ALUM.
TO LINKS SELECTOR SWITCH/PUSH BUTTONS/LAMPS
COPPER APPARATUS DEFINED
ACCESS :
SYSTEM : PARTIC DIMENSIONS
REAR (CABLING) PUSH BUTTONS :
CONSTANT SECTION H V EXTENSION OF
FRONT (CABLING)
DECREASING H V ON OFF L.TEST RESET
LEFT SIDE/RIGHT SIDE SIMILAR TO
TIN PLATED H V SPECIFICATION
D ENTRY : D
WITH COLOUR CODED PVC SLEEVE LAMPS :
TOP (BY CABLES) DEVIATION
NEUTRAL : PE : BOTTOM (BY CABLES) RED GREEN YELLOW BLUE LOOSE MATERIAL
NOT DISTRIBUTED HORIZONTAL ACCESSORIES :
SCREWS _______________
SAME SECTION AS PHASES VERTICAL SELECTOR SWITCH :
HALF SECTION HALF SECTION GLAND PLATES
HOA ON/OFF AM. SS VM. SS DRAWINGS :
CABLE GLAND
SUPPLY OF AUXILIARIES SHROUDING :
E For Approval AS BUILT E
CABLE ENDS OTHERS :
VOLTAGE : ORIGIN :
FOR PRODUCTION
AUXILIARY WIRING ________________________
-ALL CIRCUITS 230 VAC / 24V DC CONTROL TRANFR.
-CONTROL 230 VAC / 24V DC FROM POWER SUPPLY SEC.VOLTAGE : 2.50 2.50 SQ.MM QUANTITY : 1 No.
-SIGNALLING 230 V AC,60HZ. FROM BUSBAR CURRENT : 2.50 2.50 SQ.MM INDICATING INSTRUMENT (METERS) REMARKS
POWER CKT.: RYB&N Y/G (GROUNDING)
INSTRUMENTS :
F CLIMATIC CONDITION CT: RYB&N F
SIZE 96 X 96 SIZE 72 X 72
ALARM: GRAY
TYPE OF CLIMATE : NORMAL
OTHERS :
TYPE OF ATMOSPHERE : ORDINARY TO SUIT DESERT
MARKING OF CIRCUITS
CONDITIONS
POWER : STAND R,Y,B,N
POLLUTION RISKS :
AUXILIARY : LOCAL END METER RELAY :
-MOUNTING INDOOR OUTDOOR
BOTH ENDS
G -AMBIENT TEMP. 50°C G
COMPOSED
-RELATIVE HUMIDITY 50% AT 50°C
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A
LEGENDS & SYMBOL A
S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION
X1
AIR CIRCUIT BREAKER
1 ACB 10 INDICATING LAMP
SURGE PROTECTION DEVICE
(ACB) 19 28
X2
B B
T2 T4 T6
A1
MOULDED CASE CIRCUIT BREAKER
2 (MCCB) 11 CONTACTOR / RELAY COIL 20 CONTROL FUSE 29
A2
T1 T3 T5
MANUAL
AUTO
OFF
HAND/OFF/AUTO
3 MCB 12 CURRENT TRANSFORMER 21
3 3
30
C SELECTOR SWITCH C
4 4
21 A
QM-OF
L3
L2
L1
MCCB AUXILIARY CONTACTS AMMETER
0
4 13 4 10
22 SPACE HEATER 31
24 22
1 3 5 11
WITH SELECTOR SWITCH
D D
C12 V
L3-L1
L2-L3
L1-L2
L1-N
L2-N
L3-N
VOLTMETER
5
0
MCCB SHUNT TRIP CONTACTS
MX 14 4 10
L1 L2 L3
A1 S1 S2 S1 S2 S1 S2
DIGITAL MULTIFUNCTION TERMINALS
7 T1 24H TIMER 16 L1 L2 L3
25 34
MFM METER
A2 V1 V2 V3 VN 0V - +
F F
CBCT
L 1
2
CBCT
N 2 6 9 7
1 8
XX
9 XX AUXILIARY CONTACTS 18 27 36
480V
230V
CONTROL TRANSFORMER
7 9
G 2 G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
DB-B917-N1
(40 0/230 V, 3PH , 4W, 60 Hz)
Busbar Assembly
B E N B
DANGER ﺧﻄﺮ
800
C C
Ele ct ric
QM E lec tric
S ch ne id er
QM
Sch ne id e r
D D
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
EARTH BAR
A A
NEUTRAL BAR
3 LTG. CELL WORKSHOP-1 16A SP MCB,10KA 16A SP MCB,10KA LTG. OFFICES-1&3 TO 7 AND TELECOM ROOM 4
5 LTG. CELL WORKSHOP-2, UTILITY & SWITCHGEAR ROOM 20A SP MCB,10KA 16A SP MCB,10KA LTG. OFFICES-2, LUNCH ROOM, FEMALE PRAYER & TOILET, CHANGE ROOM 6
7 LTG. MALE PRAYER & TOILET, CORRIDOR 16A SP MCB,10KA 8
9 LTG. MALE PRAYER & TOILET, CORRIDOR 16A SP MCB,10KA 40A TP MCB,10KA EDH-01 (INTERMITTENT, 15.5KW) 10
11 SPARE 16A SP MCB,10KA 12
13 14
15 EDH-04 (INTERMITTENT, 7KW) 32A TP MCB,10KA 32A TP MCB,10KA EDH-02 (INTERMITTENT, 9.6KW) 16
B 17 18 B
19 40A SP MCB,10KA EDH-03 (INTERMITTENT, 5.5KW) 20
21 SPARE 40A TP MCB,10KA 20A SP MCB,10KA SPARE 22
23 16A SP MCB,10KA SPARE 24
25 ROLL UP DOOR ELECTRICALLY OPERATED, D03 IN PRE ASEEMBLY AREA (INTERMITTENT) 16A SP MCB,10KA 16A SP MCB,10KA ROLL UP DOOR ELECTRICALLY OPERATED, D10 IN PRE ASEEMBLY STORAGE AREA (INTERMITTENT) 26
27 ROLL UP DOOR ELECTRICALLY OPERATED, D05 IN CELL WORKSHOP-1 (INTERMITTENT) 16A SP MCB,10KA 16A SP MCB,10KA ROLL UP DOOR ELECTRICALLY OPERATED, D10 IN PRE ASEEMBLY STORAGE AREA (INTERMITTENT) 28
29 ROLL UP DOOR ELECTRICALLY OPERATED, D05 IN CELL WORKSHOP-1 (INTERMITTENT) 16A SP MCB,10KA 16A SP MCB,10KA ROLL UP DOOR ELECTRICALLY OPERATED, D10 IN PRE ASEEMBLY STORAGE AREA (INTERMITTENT) 30
31 ROLL UP DOOR ELECTRICALLY OPERATED, D06 IN CELL WORKSHOP-2 (INTERMITTENT) 16A SP MCB,10KA ROLL UP DOOR ELECTRICALLY OPERATED, D10 IN PRE ASEEMBLY STORAGE AREA (INTERMITTENT)
C 16A SP MCB,10KA 32 C
33 ROLL UP DOOR ELECTRICALLY OPERATED, D06 IN CELL WORKSHOP-2 (INTERMITTENT) 16A SP MCB,10KA 16A SP MCB,10KA ROLL UP DOOR ELECTRICALLY OPERATED, D14 IN UTILITY ROOM (INTERMITTENT) 34
35 SPARE 16A SP MCB,10KA 16A SP MCB,10KA SPARE 36
D D
E E
QM
63AT/100AF TP
MCCB, 25kA
(TMD)
F F
N R Y B
G Incoming Supply G
380/220V,3PH.,4W,60Hz.
Fed From : MDB-900-B917-N
Cable Size : 4CX50mm2 + 1CX35mm2 (G)
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
BILL OF QUANTITY
A A
ITEM TAG CAT. REF. No. DESCRIPTION RATING QTY MANUFACTURER
1 QM LV429552 / C10B3TM063C Circuit breaker, ComPact NSX100B, 25kA/415VAC, TMD trip unit 63A, 3 poles 3d 63A 1 Schneider Electric
2 Q1-Q21 A9F44116 Acti9 iC60N 1P 16A C Miniature Circuit breaker 16A 21 Schneider Electric
3 Q22,Q23 A9F44120 Acti9 iC60N 1P 20A C Miniature Circuit breaker 20A 2 Schneider Electric
4 Q24 A9F44140 Acti9 iC60N 1P 40A C Miniature Circuit breaker 40A 1 Schneider Electric
B B
5 Q25,Q26 A9F44332 Acti9 iC60N 3P 32A C Miniature Circuit breaker 32A 2 Schneider Electric
6 Q27,Q28 A9F44340 Acti9 iC60N 3P 40A C Miniature Circuit breaker 40A 2 Schneider Electric
7 Encl NSYCRN86200P Spacial CRN plain door with mount.plate. H800xW600xD200 IP66 IK10 RAL7035 IP66 1 Schneider Electric
8 - - Busbar Assembly - 36 Way SPN - 1 Reputed
9
C C
10
D D
E E
F F
G G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
B B
C C
D D
E E
QTY: 01No.
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
MATERIAL : ALUM.
TO LINKS SELECTOR SWITCH/PUSH BUTTONS/LAMPS
COPPER APPARATUS DEFINED
ACCESS :
SYSTEM : PARTIC DIMENSIONS
REAR (CABLING) PUSH BUTTONS :
CONSTANT SECTION H V EXTENSION OF
FRONT (CABLING)
DECREASING H V ON OFF L.TEST RESET
LEFT SIDE/RIGHT SIDE SIMILAR TO
TIN PLATED H V SPECIFICATION
D ENTRY : D
WITH COLOUR CODED PVC SLEEVE LAMPS :
TOP (BY CABLES) DEVIATION
NEUTRAL : PE : BOTTOM (BY CABLES) RED GREEN YELLOW BLUE LOOSE MATERIAL
NOT DISTRIBUTED HORIZONTAL ACCESSORIES :
SCREWS _______________
SAME SECTION AS PHASES VERTICAL SELECTOR SWITCH :
HALF SECTION HALF SECTION GLAND PLATES
HOA ON/OFF AM. SS VM. SS DRAWINGS :
CABLE GLAND
SUPPLY OF AUXILIARIES SHROUDING :
E For Approval AS BUILT E
CABLE ENDS OTHERS :
VOLTAGE : ORIGIN :
FOR PRODUCTION
AUXILIARY WIRING ________________________
-ALL CIRCUITS 230 VAC / 24V DC CONTROL TRANFR.
-CONTROL 230 VAC / 24V DC FROM POWER SUPPLY SEC.VOLTAGE : 2.50 2.50 SQ.MM QUANTITY : 1 No.
-SIGNALLING 230 V AC,60HZ. EXTERNAL CURRENT : 2.50 2.50 SQ.MM INDICATING INSTRUMENT (METERS) REMARKS
POWER CKT.: RYB&N Y/G (GROUNDING)
INSTRUMENTS :
F CLIMATIC CONDITION CT: RYB&N F
SIZE 96 X 96 SIZE 72 X 72
ALARM: GRAY
TYPE OF CLIMATE : NORMAL
OTHERS :
TYPE OF ATMOSPHERE : ORDINARY TO SUIT DESERT
MARKING OF CIRCUITS
CONDITIONS
POWER : STAND R,Y,B,N
POLLUTION RISKS :
AUXILIARY : LOCAL END METER RELAY :
-MOUNTING INDOOR OUTDOOR
BOTH ENDS
G -AMBIENT TEMP. 50°C G
COMPOSED
-RELATIVE HUMIDITY 50% AT 50°C
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A
LEGENDS & SYMBOL A
S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION
X1
AIR CIRCUIT BREAKER
1 ACB 10 INDICATING LAMP
SURGE PROTECTION DEVICE
(ACB) 19 28
X2
B B
T2 T4 T6
A1
MOULDED CASE CIRCUIT BREAKER
2 (MCCB) 11 CONTACTOR / RELAY COIL 20 CONTROL FUSE 29
A2
T1 T3 T5
MANUAL
AUTO
OFF
HAND/OFF/AUTO
3 MCB 12 CURRENT TRANSFORMER 21
3 3
30
C SELECTOR SWITCH C
4 4
21 A
QM-OF
L3
L2
L1
MCCB AUXILIARY CONTACTS AMMETER
0
4 13 4 10
22 SPACE HEATER 31
24 22
1 3 5 11
WITH SELECTOR SWITCH
D D
C12 V
L3-L1
L2-L3
L1-L2
L1-N
L2-N
L3-N
VOLTMETER
5
0
MCCB SHUNT TRIP CONTACTS
MX 14 4 10
L1 L2 L3
A1 S1 S2 S1 S2 S1 S2
DIGITAL MULTIFUNCTION TERMINALS
7 T1 24H TIMER 16 L1 L2 L3
25 34
MFM METER
A2 V1 V2 V3 VN 0V - +
F F
CBCT
L 1
2
CBCT
N 2 6 9 7
1 8
XX
9 XX AUXILIARY CONTACTS 18 27 36
480V
230V
CONTROL TRANSFORMER
7 9
G 2 G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
PL-1
LCP-B917-E1
(40 0/230 V,3 PH .,4W ,6 0Hz.)
DS-1
ACH
Earth Stud
B B
H
O
A
ON OFF E N
R G
500
DANGER ﺧﻄﺮ
HAZAR D OF EL ECTR IC AL S HOCK OR B URN
TURN O FF POWER TO T HIS EQUI PM ENT
BEF OR E WOR KING I NSIDE
KM1 KM1
F1 F2 PC1
C C
F F
NOTES:
1. BUSBAR : TIN PLATED COPPER
DANGER ﺧﻄﺮ LCP-B917-E1
HAZAR D OF ELECTRICAL SHOCK OR BURN
PANEL BOARD FACTORY: 2. ENCLOSURE: THICKNESS 1.2mm TURN O FF POWER TO THIS EQUIPMENT (CELL ASSEMBLY BUILDING)
BEFORE WORKING INSIDE
PROJECT : NEOM GREEN HYDROGEN PROJECT - U900 3. PANEL WEIGHT : 18Kg (APPX.)
PROJECT NO. : PM210011
ﺧﻄـــــﺮ اﻟﺼـــــﺪﻣﺔ اﻟﮑﮫﺮﺑﺎﺋﯿـــــﺔ أو اﻻﺣـــــﺘﺮاق
إﻳﻘـــﺎف اﻟﻄﺎﻗـــﺔ ﻟﮫـــﺬه اﻟﻤﻌــــﺪات 400/230V,3PH.,4W,60Hz.
PANEL REF. : LCP-B917-E1 (CELL ASSEMBLY BUILDING) 4. PANEL MOUNTING : WALL MOUNTED TYPE ﻗﺒــــﻞ ااﻟﻌﻤــــﻞ ﺑﺎﻟــــﺪاﺧﻞ
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
Circuit-11
Circuit-12
Circuit-6
Circuit-9
1 3 5 7
B B
FU1
4A
1 3 5 7
C C
D KM1 KM2 D
A2 2/T1 4/T2 6/T3 A2 2/T1 4/T2 6/T3
HAND
AUTO
OFF
FU2
1 3
2 4 13 13 21 21
S1
KM1 KM2 KM1 KM2
2
2 4 6 8 PC
PHOTO CELL 14 14 22 22 1
PC TH1
11
E L 1 THERMOSTAT 12
DS-1
E
1 2
N 2
X1
A1 A1 X1 X1
PL-1
ACH1
KM1 KM2 X2
F A2 A2 X2 X2 F
N
2 4 6 8
Circuit-11
Circuit-12
Circuit-6
Circuit-9
G G
TO LIGHTING CIRCUITS
N
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A BILL OF QUANTITY A
5 ACH1 NSYCR55WU2 ClimaSys PTC heating resistance 55W, 110-250V 230V AC 1 Schneider Electric
6 S1 XB5AD33 Selector switch, Harmony XB5 black, 22mm, 3 positions, stay put, 2 NO - 1 Schneider Electric
7 PC1 1IC 7051 Panel Mounted photocell Module, IP65 - 1 Perry
8 Encl NSYCRN54200 + NSYMM54 Spacial CRN plain door with mount.plate. H500xW400xD200 IP66 IK10 RAL7035 IP66 1 Schneider Electric
C 9 DS1 - Door Limit Switch - 1 Andeli C
D D
E E
F F
G G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
B B
C C
D D
E E
QTY: 01No.
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
MATERIAL : ALUM.
TO LINKS SELECTOR SWITCH/PUSH BUTTONS/LAMPS
COPPER APPARATUS DEFINED
ACCESS :
SYSTEM : PARTIC DIMENSIONS
REAR (CABLING) PUSH BUTTONS :
CONSTANT SECTION H V EXTENSION OF
FRONT (CABLING)
DECREASING H V ON OFF L.TEST RESET
LEFT SIDE/RIGHT SIDE SIMILAR TO
TIN PLATED H V SPECIFICATION
D ENTRY : D
WITH COLOUR CODED PVC SLEEVE LAMPS :
TOP (BY CABLES) DEVIATION
NEUTRAL : PE : BOTTOM (BY CABLES) RED GREEN YELLOW BLUE LOOSE MATERIAL
NOT DISTRIBUTED HORIZONTAL ACCESSORIES :
SCREWS _______________
SAME SECTION AS PHASES VERTICAL SELECTOR SWITCH :
HALF SECTION HALF SECTION GLAND PLATES
HOA ON/OFF AM. SS VM. SS DRAWINGS :
CABLE GLAND
SUPPLY OF AUXILIARIES SHROUDING :
E For Approval AS BUILT E
CABLE ENDS OTHERS :
VOLTAGE : ORIGIN :
FOR PRODUCTION
AUXILIARY WIRING ________________________
-ALL CIRCUITS 230 VAC / 24V DC CONTROL TRANFR.
-CONTROL 230 VAC / 24V DC FROM POWER SUPPLY SEC.VOLTAGE : 2.50 2.50 SQ.MM QUANTITY : 1 No.
-SIGNALLING 230 V AC,60HZ. FROM BUSBAR CURRENT : 2.50 2.50 SQ.MM INDICATING INSTRUMENT (METERS) REMARKS
POWER CKT.: RYB&N Y/G (GROUNDING)
INSTRUMENTS :
F CLIMATIC CONDITION CT: RYB&N F
SIZE 96 X 96 SIZE 72 X 72
ALARM: GRAY
TYPE OF CLIMATE : NORMAL
OTHERS :
TYPE OF ATMOSPHERE : ORDINARY TO SUIT DESERT
MARKING OF CIRCUITS
CONDITIONS
POWER : STAND R,Y,B,N
POLLUTION RISKS :
AUXILIARY : LOCAL END METER RELAY :
-MOUNTING INDOOR OUTDOOR
BOTH ENDS
G -AMBIENT TEMP. 50°C G
COMPOSED
-RELATIVE HUMIDITY 50% AT 50°C
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A
LEGENDS & SYMBOL A
S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION
X1
AIR CIRCUIT BREAKER
1 ACB 10 INDICATING LAMP
SURGE PROTECTION DEVICE
(ACB) 19 28
X2
B B
T2 T4 T6
A1
MOULDED CASE CIRCUIT BREAKER
2 (MCCB) 11 CONTACTOR / RELAY COIL 20 CONTROL FUSE 29
A2
T1 T3 T5
MANUAL
AUTO
OFF
HAND/OFF/AUTO
3 MCB 12 CURRENT TRANSFORMER 21
3 3
30
C SELECTOR SWITCH C
4 4
21 A
QM-OF
L3
L2
L1
MCCB AUXILIARY CONTACTS AMMETER
0
4 13 4 10
22 SPACE HEATER 31
24 22
1 3 5 11
WITH SELECTOR SWITCH
D D
C12 V
L3-L1
L2-L3
L1-L2
L1-N
L2-N
L3-N
VOLTMETER
5
0
MCCB SHUNT TRIP CONTACTS
MX 14 4 10
L1 L2 L3
A1 S1 S2 S1 S2 S1 S2
DIGITAL MULTIFUNCTION TERMINALS
7 T1 24H TIMER 16 L1 L2 L3
25 34
MFM METER
A2 V1 V2 V3 VN 0V - +
F F
CBCT
L 1
2
CBCT
N 2 6 9 7
1 8
XX
9 XX AUXILIARY CONTACTS 18 27 36
480V
230V
CONTROL TRANSFORMER
7 9
G 2 G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A DB-B917-N2
(40 0/2 30V, 3PH, 4W, 60 Hz) A
Busbar Assembly
B B
E N
1000
DA NG ER ﺧﻄﺮ
HA ZA RD O F E LEC TRIC A L SH OC K O R B URN
TURN OFF PO WER TO T HIS EQ UIPME NT
BE FORE WO RK ING INS ID E
C C
Electric
QM Electric QM
Schneider
Schneider
D D
F F
BOTTOM VIEW TOP VIEW
NOTES:
PANEL BOARD FACTORY: 1. BUSBAR : TIN PLATED COPPER
DANGER ﺧﻄﺮ DB-B917-N2
HAZAR D OF ELECTRICAL SHOCK OR BURN
PROJECT
PANEL REF.
:
:
NEOM GREEN HYDROGEN PROJECT - U900
DB-B917-N2 (CELL ASSEMBLY BUILDING)
2. ENCLOSURE: THICKNESS 1.2mm TURN O FF POWER TO THIS EQUIPMENT (CELL ASSEMBLY BUILDING)
BEFORE WORKING INSIDE
PROJECT NO. : PM210011 3. PANEL WEIGHT : 95Kg (APPX.)
G CURRENT RATING : 80A
ﺧﻄـــــﺮ اﻟﺼـــــﺪﻣﺔ اﻟﮑﮫﺮﺑﺎﺋﯿـــــﺔ أو اﻻﺣـــــﺘﺮاق
إﻳﻘـــﺎف اﻟﻄﺎﻗـــﺔ ﻟﮫـــﺬه اﻟﻤﻌــــﺪات 400/230V,3PH.,4W,60Hz. G
SYSTEM VOLTAGE : 400/230V,3PH., 4W, 60Hz 4. PANEL MOUNTING : SURFACE MOUNTED TYPE ﻗﺒــــﻞ ااﻟﻌﻤــــﻞ ﺑﺎﻟــــﺪاﺧﻞ
DEGREE OF PROTECTION : IP 41
PANEL WEIGHT : 95Kg DANGER LABEL PANEL TAG
YEAR OF MANUFACTURE : 2023 (WHITE LETTERS IN RED BACKGROUND)
MANUFACTURER REF. : NPB-2210009 (BLACK LETTERS IN WHITE BACKGROUND)
NAME PLATE DETAILS
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
EARTH BAR
A A
NEUTRAL BAR
3 SOCKET OUTLETS - WORKSHOP-2 20A 30mA SP RCBO,10KA 20A 30mA SP RCBO,10KA SOCKETS OUTLETS - STORAGE AREA & SWITCHGEAR ROOM 4
5 SOCKET OUTLETS - CELL WORKSHOP-1&2 20A 30mA SP RCBO,10KA 20A 30mA SP RCBO,10KA SOCKETS OUTLETS - STORAGE, UTILITY RM, MALE PRAYER & TOILET 6
7 SOCKET OUTLETS - OFFICE-5,6&7 20A 30mA SP RCBO,10KA 20A 30mA SP RCBO,10KA SOCKETS OUTLETS - LUNCH ROOM, FEMALE TOILETS, CHANGING ROOM 8
9 SOCKET OUTLETS - OFFICE-3&7, TELECOM ROOM 20A 30mA SP RCBO,10KA 16A SP MCB,10KA PORTABLE COMPRESSOR (INTERMITTENT) 10
11 SOCKET OUTLETS - OFFICE-1, CORRIDOR & FEMALE PRAYER 20A 30mA SP RCBO,10KA 16A SP MCB,10KA SPARE 12
13 14
15 3 TON OVERHEAD CRANE FOR STORAGE AREA 32A TP MCB,10KA 32A TP MCB,10KA 0.5 TON OVERHEAD CRANE FOR CELL WORKSHOP - 1 16
B 17 18 B
19 20
21 DEMIN WATER PUMP CONTROL PANEL 32A TP MCB,10KA 32A TP MCB,10KA 0.5 TON OVERHEAD CRANE FOR CELL WORKSHOP - 2 22
23 24
25 SPARE 20A SP MCB,10KA 26
27 SPARE 20A SP MCB,10KA 32A TP MCB,10KA SPARE 28
29 3KVA UPS FOR IT 20A SP MCB,10KA 30
31 EXHAUST FAN (EF-02) 16A SP MCB,10KA EXHAUST FAN (EF-04)
C 16A SP MCB,10KA 32 C
33 SPARE 16A SP MCB,10KA 16A SP MCB,10KA SPARE 34
35 EXHAUST FAN (EF-03) 16A SP MCB,10KA 16A 30mA SP RCBO,10KA HOT WATER CIRCULATING PUMP (HWRP-01) (INTERMITTENT) 36
37 32A SP MCB,10KA 5KVA UPS FOR PAGA 38
39 EXHAUST FAN (EF-01A) 20A TP MCB,10KA 20A SP MCB,10KA SPARE 40
41 32A SP MCB,10KA SPARE 42
43 16A SP MCB,10KA SPARE 44
45 EXHAUST FAN (EF-01B) 20A TP MCB,10KA 20A SP MCB,10KA SPARE 46
D D
47 20A SP MCB,10KA SPARE 48
E E
QM
80AT/100AF TP
MCCB, 25kA
(TMD)
F F
N R Y B
G Incoming Supply G
380/220V,3PH.,4W,60Hz.
Fed From : MDB-900-B917-N
Cable Size : 4CX50mm2 + 1CX35mm2 (G)
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A BILL OF QUANTITY A
D D
E E
F F
G G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
B B
C C
D D
E E
QTY: 01No.
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
MATERIAL : ALUM.
TO LINKS SELECTOR SWITCH/PUSH BUTTONS/LAMPS
COPPER APPARATUS DEFINED
ACCESS :
SYSTEM : PARTIC DIMENSIONS
REAR (CABLING) PUSH BUTTONS :
CONSTANT SECTION H V EXTENSION OF
FRONT (CABLING)
DECREASING H V ON OFF L.TEST RESET
LEFT SIDE/RIGHT SIDE SIMILAR TO
TIN PLATED H V SPECIFICATION
D ENTRY : D
WITH COLOUR CODED PVC SLEEVE LAMPS :
TOP (BY CABLES) DEVIATION
NEUTRAL : PE : BOTTOM (BY CABLES) RED GREEN YELLOW BLUE LOOSE MATERIAL
NOT DISTRIBUTED HORIZONTAL ACCESSORIES :
SCREWS _______________
SAME SECTION AS PHASES VERTICAL SELECTOR SWITCH :
HALF SECTION HALF SECTION GLAND PLATES
HOA ON/OFF AM. SS VM. SS DRAWINGS :
CABLE GLAND
SUPPLY OF AUXILIARIES SHROUDING :
E For Approval AS BUILT E
CABLE ENDS OTHERS :
VOLTAGE : ORIGIN :
FOR PRODUCTION
AUXILIARY WIRING ________________________
-ALL CIRCUITS 230 VAC / 24V DC CONTROL TRANFR.
-CONTROL 230 VAC / 24V DC FROM POWER SUPPLY SEC.VOLTAGE : 2.50 2.50 SQ.MM QUANTITY : 1 No.
-SIGNALLING 230 V AC,60HZ. FROM BUSBAR CURRENT : 2.50 2.50 SQ.MM INDICATING INSTRUMENT (METERS) REMARKS
POWER CKT.: RYB&N Y/G (GROUNDING)
INSTRUMENTS :
F CLIMATIC CONDITION CT: RYB&N F
SIZE 96 X 96 SIZE 72 X 72
ALARM: GRAY
TYPE OF CLIMATE : NORMAL
OTHERS :
TYPE OF ATMOSPHERE : ORDINARY TO SUIT DESERT
MARKING OF CIRCUITS
CONDITIONS
POWER : STAND R,Y,B,N
POLLUTION RISKS :
AUXILIARY : LOCAL END METER RELAY :
-MOUNTING INDOOR OUTDOOR
BOTH ENDS
G -AMBIENT TEMP. 50°C G
COMPOSED
-RELATIVE HUMIDITY 50% AT 50°C
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A
LEGENDS & SYMBOL A
S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION
X1
AIR CIRCUIT BREAKER
1 ACB 10 INDICATING LAMP
SURGE PROTECTION DEVICE
(ACB) 19 28
X2
B B
T2 T4 T6
A1
MOULDED CASE CIRCUIT BREAKER
2 (MCCB) 11 CONTACTOR / RELAY COIL 20 CONTROL FUSE 29
A2
T1 T3 T5
MANUAL
AUTO
OFF
HAND/OFF/AUTO
3 MCB 12 CURRENT TRANSFORMER 21
3 3
30
C SELECTOR SWITCH C
4 4
21 A
QM-OF
L3
L2
L1
MCCB AUXILIARY CONTACTS AMMETER
0
4 13 4 10
22 SPACE HEATER 31
24 22
1 3 5 11
WITH SELECTOR SWITCH
D D
C12 V
L3-L1
L2-L3
L1-L2
L1-N
L2-N
L3-N
VOLTMETER
5
0
MCCB SHUNT TRIP CONTACTS
MX 14 4 10
L1 L2 L3
A1 S1 S2 S1 S2 S1 S2
DIGITAL MULTIFUNCTION TERMINALS
7 T1 24H TIMER 16 L1 L2 L3
25 34
MFM METER
A2 V1 V2 V3 VN 0V - +
F F
CBCT
L 1
2
CBCT
N 2 6 9 7
1 8
XX
9 XX AUXILIARY CONTACTS 18 27 36
480V
230V
CONTROL TRANSFORMER
7 9
G 2 G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A DB-B917-N3
(40 0/2 30V, 3PH, 4W, 60 Hz) A
Busbar Assembly
B E N B
1000
DA NG ER ﺧﻄﺮ
HA ZA RD O F E LEC TRIC A L SH OC K O R B URN
TURN OFF PO WER TO T HIS EQ UIPME NT
BE FORE WO RK ING INS ID E
C C
Electric
QM Electric
Schneider
QM
Schneider
D D
F F
BOTTOM VIEW TOP VIEW
NOTES:
PANEL BOARD FACTORY: 1. BUSBAR : TIN PLATED COPPER
DANGER ﺧﻄﺮ DB-B917-N3
HAZAR D OF ELECTRICAL SHOCK OR BURN
PROJECT
PROJECT NO.
:
:
NEOM GREEN HYDROGEN PROJECT - U900
PM210011
2. ENCLOSURE: THICKNESS 1.2mm TURN O FF POWER TO THIS EQUIPMENT (CELL ASSEMBLY BUILDING)
BEFORE WORKING INSIDE
PANEL REF. : DB-B917-N3 (CELL ASSEMBLY BUILDING) 3. PANEL WEIGHT : 85Kg (APPX.)
G
CURRENT RATING : 160A
ﺧﻄـــــﺮ اﻟﺼـــــﺪﻣﺔ اﻟﮑﮫﺮﺑﺎﺋﯿـــــﺔ أو اﻻﺣـــــﺘﺮاق
إﻳﻘـــﺎف اﻟﻄﺎﻗـــﺔ ﻟﮫـــﺬه اﻟﻤﻌــــﺪات 400/230V,3PH.,4W,60Hz. G
SYSTEM VOLTAGE : 400/230V,3PH., 4W, 60Hz 4. PANEL MOUNTING : SURFACE MOUNTED TYPE ﻗﺒــــﻞ ااﻟﻌﻤــــﻞ ﺑﺎﻟــــﺪاﺧﻞ
DEGREE OF PROTECTION : IP 66
PANEL WEIGHT : 85Kg DANGER LABEL PANEL TAG
YEAR OF MANUFACTURE : 2023 (WHITE LETTERS IN RED BACKGROUND)
MANUFACTURER REF. : NPB-2210009 (BLACK LETTERS IN WHITE BACKGROUND)
NAME PLATE DETAILS
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
EARTH BAR
A A
NEUTRAL BAR
3 DOOR AIR CURTAIN IN STORAGE AREA (DAC-01) 16A SP MCB,10KA 16A SP MCB,10KA DOOR AIR CURTAIN IN STORAGE AREA (DAC-01) 4
5 DOOR AIR CURTAIN IN STORAGE AREA (DAC-03) 16A SP MCB,10KA 16A SP MCB,10KA DOOR AIR CURTAIN IN STORAGE AREA (DAC-03) 6
7 DOOR AIR CURTAIN IN CELL WORKSHOP-1 (DAC-01) 16A SP MCB,10KA 16A SP MCB,10KA DOOR AIR CURTAIN IN CELL WORKSHOP-1 (DAC-01) 8
9 DOOR AIR CURTAIN IN CELL WORKSHOP-1 (DAC-03) 16A SP MCB,10KA 16A SP MCB,10KA DOOR AIR CURTAIN IN CELL WORKSHOP-1 (DAC-03) 10
11 DOOR AIR CURTAIN IN CELL WORKSHOP-2 (DAC-03) 16A SP MCB,10KA 16A SP MCB,10KA DOOR AIR CURTAIN IN CELL WORKSHOP-2 (DAC-01) 12
13 DOOR AIR CURTAIN IN CELL AIRLOCK-106 (DAC-02) 16A SP MCB,10KA 16A SP MCB,10KA DOOR AIR CURTAIN IN CELL AIRLOCK-116 (DAC-02) 14
15 SPARE 16A SP MCB,10KA 16A SP MCB,10KA SPARE 16
B 17 SPARE 16A SP MCB,10KA 16A SP MCB,10KA SPARE 18 B
19 20
21 WELDING SOCKET OUTLET IN CELL WORKSHOP-1 (WO-01) 63A TP MCB,10KA 63A TP MCB,10KA WELDING SOCKET OUTLET IN CELL WORKSHOP-1 (WO-02) 22
23 24
25 26
27 WELDING SOCKET OUTLET IN CELL WORKSHOP-2 (WO-03) 63A TP MCB,10KA 63A TP MCB,10KA WELDING SOCKET OUTLET IN CELL WORKSHOP-2 (WO-04) 28
29 30
31
C 32 C
33 WELDING SOCKET OUTLET IN PAN ASSEMBLY AREA (WO-05) 63A TP MCB,10KA 63A TP MCB,10KA WELDING SOCKET OUTLET IN PAN ASSEMBLY AREA (WO-06) 34
35 36
37 38
39 SPARE 63A TP MCB,10KA 63A TP MCB,10KA SPARE 40
41 42
43 DOOR AIR CURTAIN 16A SP MCB,10KA 16A SP MCB,10KA DOOR AIR CURTAIN 44
45 DOOR AIR CURTAIN 16A SP MCB,10KA 16A SP MCB,10KA DOOR AIR CURTAIN 46
D D
47 DOOR AIR CURTAIN 16A SP MCB,10KA 16A SP MCB,10KA DOOR AIR CURTAIN 48
E E
QM
160AT/160AF TP
MCCB, 25kA
(TMD)
F F
N R Y B
G Incoming Supply G
380/220V,3PH.,4W,60Hz.
Fed From : MDB-900-B917-N
Cable Size : 4CX185mm2 + 1CX70mm2 (G)
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A
BILL OF QUANTITY A
B 4 Encl NSYCRN106250P Spacial CRN plain door with mount.plate. H1000xW600xD250 IP66 IK10 RAL7035 IP66 1 Schneider Electric B
5 - - Busbar Assembly - 48 Way SPN - 1 Reputed
6
7
8
C 9 C
10
D D
E E
F F
G G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A A
B B
C C
D D
E E
QTY: 01No.
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
MATERIAL : ALUM.
TO LINKS SELECTOR SWITCH/PUSH BUTTONS/LAMPS
COPPER APPARATUS DEFINED
ACCESS :
SYSTEM : PARTIC DIMENSIONS
REAR (CABLING) PUSH BUTTONS :
CONSTANT SECTION H V EXTENSION OF
FRONT (CABLING)
DECREASING H V ON OFF L.TEST RESET
LEFT SIDE/RIGHT SIDE SIMILAR TO
TIN PLATED H V SPECIFICATION
D ENTRY : D
WITH COLOUR CODED PVC SLEEVE LAMPS :
TOP (BY CABLES) DEVIATION
NEUTRAL : PE : BOTTOM (BY CABLES) RED GREEN YELLOW BLUE LOOSE MATERIAL
NOT DISTRIBUTED HORIZONTAL ACCESSORIES :
SCREWS _______________
SAME SECTION AS PHASES VERTICAL SELECTOR SWITCH :
HALF SECTION HALF SECTION GLAND PLATES
HOA ON/OFF AM. SS VM. SS DRAWINGS :
CABLE GLAND
SUPPLY OF AUXILIARIES SHROUDING :
E For Approval AS BUILT E
CABLE ENDS OTHERS :
VOLTAGE : ORIGIN :
FOR PRODUCTION
AUXILIARY WIRING ________________________
-ALL CIRCUITS 230 VAC / 24V DC CONTROL TRANFR.
-CONTROL 230 VAC / 24V DC FROM POWER SUPPLY SEC.VOLTAGE : 2.50 2.50 SQ.MM QUANTITY : 1 No.
-SIGNALLING 230 V AC,60HZ. FROM BUSBAR CURRENT : 2.50 2.50 SQ.MM INDICATING INSTRUMENT (METERS) REMARKS
POWER CKT.: RYB&N Y/G (GROUNDING)
INSTRUMENTS :
F CLIMATIC CONDITION CT: RYB&N F
SIZE 96 X 96 SIZE 72 X 72
ALARM: GRAY
TYPE OF CLIMATE : NORMAL
OTHERS :
TYPE OF ATMOSPHERE : ORDINARY TO SUIT DESERT
MARKING OF CIRCUITS
CONDITIONS
POWER : STAND R,Y,B,N
POLLUTION RISKS :
AUXILIARY : LOCAL END METER RELAY :
-MOUNTING INDOOR OUTDOOR
BOTH ENDS
G -AMBIENT TEMP. 50°C G
COMPOSED
-RELATIVE HUMIDITY 50% AT 50°C
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A
LEGENDS & SYMBOL A
S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION S.NO SYMBOL DESCRIPTION
X1
AIR CIRCUIT BREAKER
1 ACB 10 INDICATING LAMP
SURGE PROTECTION DEVICE
(ACB) 19 28
X2
B B
T2 T4 T6
A1
MOULDED CASE CIRCUIT BREAKER
2 (MCCB) 11 CONTACTOR / RELAY COIL 20 CONTROL FUSE 29
A2
T1 T3 T5
MANUAL
AUTO
OFF
HAND/OFF/AUTO
3 MCB 12 CURRENT TRANSFORMER 21
3 3
30
C SELECTOR SWITCH C
4 4
21 A
QM-OF
L3
L2
L1
MCCB AUXILIARY CONTACTS AMMETER
0
4 13 4 10
22 SPACE HEATER 31
24 22
1 3 5 11
WITH SELECTOR SWITCH
D D
C12 V
L3-L1
L2-L3
L1-L2
L1-N
L2-N
L3-N
VOLTMETER
5
0
MCCB SHUNT TRIP CONTACTS
MX 14 4 10
L1 L2 L3
A1 S1 S2 S1 S2 S1 S2
DIGITAL MULTIFUNCTION TERMINALS
7 T1 24H TIMER 16 L1 L2 L3
25 34
MFM METER
A2 V1 V2 V3 VN 0V - +
F F
CBCT
L 1
2
CBCT
N 2 6 9 7
1 8
XX
9 XX AUXILIARY CONTACTS 18 27 36
480V
230V
CONTROL TRANSFORMER
7 9
G 2 G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
DB-B917-E2
(40 0/230 V, 3PH , 4W, 60 Hz)
A A
QSPD SPD F1 F1
Busbar Assembly
B B
1000
E N
DANGER ﺧﻄﺮ
HAZAR D OF EL ECTR IC AL S HOCK OR B URN
TURN O FF POWER TO T HIS EQUI PM ENT
BEF OR E WOR KING I NSIDE
ﺧﻄـــﺮ اﻟ ﺼــــﺪ ﻣﺔ اﻟﮑﮫﺮﺑﺎﺋﯿــــﺔ أو ا ﻻﺣــــﺘﺮا ق
إﻳ ﻘــﺎ ف اﻟﻄﺎﻗــﺔ ﻟﮫــﺬه اﻟﻤﻌـــﺪات
ﻗﺒــ ﻞ ااﻟﻌﻤـــ ﻞ ﺑﺎﻟـــﺪاﺧ ﻞ
C C
Ele ct ric
QM E lec tric
QM
S ch ne id er
Sch ne id e r
D D
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
EARTH BAR
A A
NEUTRAL BAR
3 SPU-OU-02A (DUTY) 32A 30mA SP RCBO,10KA 32A 30mA SP RCBO,10KA SPU-OU-02B (STANDBY) 4
5 SPU-OU-03A (DUTY) 32A 30mA SP RCBO,10KA 32A 30mA SP RCBO,10KA SPU-OU-03C (STANDBY) 6
7 SPU-OU-03B (DUTY) 32A 30mA SP RCBO,10KA 32A 30mA SP RCBO,10KA SPU-OU-03D (STANDBY) 8
9 TORQUE TOOLS (INTERMITTENT) 16A SP MCB,10KA 20A SP MCB,10KA DDC PANEL (STANDBY) 10
11 SPARE 32A SP MCB,10KA 20A SP MCB,10KA 2KVA UPS FOR DDC 12
13 14
15 TILTING DEVICE (INTERMITTENT) 32A TP MCB,10KA 32A TP MCB,10KA + 40A 30mA 4P RCCB AHU-01B (STANDBY) 16
B 17 18 B
19 20
21 AHU-01B (STANDBY) 32A TP MCB,10KA + 40A 30mA 4P RCCB 32A TP MCB,10KA SPARE 22
23 24
25 16A SP MCB,10KA MOTORIZED GAS TIGHT DAMPERS 26
27 SPARE 32A TP MCB,10KA 16A SP MCB,10KA MOTORIZED VOLUME CONTROL DAMPERS 28
29 20A SP MCB,10KA SPARE 30
C C
QSPD
63A 3P Fuse
D D
SPD1
QM
63AT/100AF TP
MCCB, 25kA
E (TMD) E
F F
N R Y B
G Incoming Supply G
380/220V,3PH.,4W,60Hz.
Fed From : MDB-900-B917-E
Cable Size : 4CX50mm2 + 1CX35mm2 (G)
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
A BILL OF QUANTITY A
10 Encl NSYCRN106250P Spacial CRN plain door with mount.plate. H1000xW600xD250 IP66 IK10 RAL7035 IP66 1 Schneider Electric
11 - - Busbar Assembly - 30 Way SPN - 1 Reputed
12
13
D D
14
E E
F F
G G
ISSUE REVISION DATE PROJECT: NEOM GREEN HYDROGEN PROJECT - U900 DESIGNED BY: DRAWN BY: DATE REF. NO: NPB-2210009
Product Catalogues
PM210011-NUI900-ESE-00001_02 88 of 154
Spacial Thalassa ClimaSys Actassi
Catalogue 2022
Universal Enclosures
More than 60 years protecting your equipment
se.com/enclosures
PM210011-NUI900-ESE-00001_02 89 of 154
Introduction
2
CRN Enclosure for indoor
non-clean industrial environment
This range can be configured according to your needs
CRN
Painting Machining
Safe Practical
For people: • 4 welded M8 x 15 back studs with 10-mm
• Two welded M6 x 15 earth studs welded to collar for direct installation of mounting
the back and one M6 x 15 stud on the door plate
For your installation:
• Water and dust tightness IP66
• Ruggedness IK10 to protect your
components from external impact
• Concealed hinges to prevent removal
of the door
Smart Convenient
• Welded door reinforcement profile allowing • Large embedded cable-entry plate with
the fixing of equipment in models from a neoprene gasket, flush with the back of
500 mm in height the enclosure
• Direct fixing or using the brackets fixed
from outside
PM210011-NUI900-ESE-00001_02 90 of 154
Characteristics
2
CRN
PM210011-NUI900-ESE-00001_02 91 of 154
Spacial CRN, Selection guide
Dimensions
Height Width Depth Doors IP Weight with plain door, with plain door, with glazed door, Plain Silkscreened Micro Telequick
(A) (B) (C) (kg) (1) with mounting without mounting with mounting perforated
(mm) (mm) (mm) plate plate plate
200 200 150 1 66 2.5 - NSYCRN22150 (2) - NSYMM22 - - -
200 300 150 1 66 3.9 - NSYCRN23150 (2) - NSYMM32 - NSYMF32 -
400 300 150 1 66 6.0 NSYCRN43150P NSYCRN43150 NSYCRN43150T NSYMM43 NSYMS43 NSYMF43 NSYMR43
400 300 200 1 66 6.8 NSYCRN43200P NSYCRN43200 NSYCRN43200T NSYMM43 NSYMS43 NSYMF43 NSYMR43
400 400 200 1 66 8.0 NSYCRN44200P NSYCRN44200 NSYCRN44200T NSYMM44 NSYMS44 NSYMF44 NSYMR44
400 600 250 1 66 10.0 NSYCRN46250P NSYCRN46250 NSYCRN46250T NSYMM64 NSYMS64 NSYMF64 NSYMR46
400 600 300 1 66 11.2 - NSYCRN46300 NSYCRN46300T NSYMM64 NSYMS64 NSYMF64 NSYMR46
500 400 150 1 66 8.7 NSYCRN54150P NSYCRN54150 NSYCRN54150T NSYMM54 NSYMS54 NSYMF54 NSYMR54
500 400 200 1 66 9.8 NSYCRN54200P NSYCRN54200 NSYCRN54200T NSYMM54 NSYMS54 NSYMF54 NSYMR54
500 400 250 1 66 11.0 NSYCRN54250P NSYCRN54250 NSYCRN54250T NSYMM54 NSYMS54 NSYMF54 NSYMR54
500 500 250 1 66 12.8 NSYCRN55250P NSYCRN55250 NSYCRN55250T NSYMM55 NSYMS55 NSYMF55 NSYMR55
600 400 150 1 66 9.3 NSYCRN64150P NSYCRN64150 NSYCRN64150T NSYMM64 NSYMS64 NSYMF64 NSYMR64
600 400 200 1 66 10.8 NSYCRN64200P NSYCRN64200 NSYCRN64200T NSYMM64 NSYMS64 NSYMF64 NSYMR64
600 400 250 1 66 12.3 NSYCRN64250P NSYCRN64250 NSYCRN64250T NSYMM64 NSYMS64 NSYMF64 NSYMR64
600 500 150 1 66 11.3 NSYCRN65150P NSYCRN65150 NSYCRN65150T NSYMM65 - NSYMF65 NSYMR65
600 500 200 1 66 14.3 NSYCRN65200P NSYCRN65200 NSYCRN65200T NSYMM65 - NSYMF65 NSYMR65
600 500 250 1 66 16.2 NSYCRN65250P NSYCRN65250 NSYCRN65250T NSYMM65 - NSYMF65 NSYMR65
600 600 200 1 66 16.3 NSYCRN66200P NSYCRN66200 NSYCRN66200T NSYMM66 NSYMS66 NSYMF66 NSYMR66
600 600 250 1 66 18.2 NSYCRN66250P NSYCRN66250 NSYCRN66250T NSYMM66 NSYMS66 NSYMF66 NSYMR66
600 600 300 1 66 19.8 NSYCRN66300P NSYCRN66300 NSYCRN66300T NSYMM66 NSYMS66 NSYMF66 NSYMR66
600 800 300 1 66 26.0 - NSYCRN68300 NSYCRN68300T NSYMM86 NSYMS86 NSYMF86 NSYMR68
700 500 200 1 66 17.3 NSYCRN75200P NSYCRN75200 NSYCRN75200T NSYMM75 NSYMS75 NSYMF75 NSYMR75
700 500 250 1 66 19.3 NSYCRN75250P NSYCRN75250 NSYCRN75250T NSYMM75 NSYMS75 NSYMF75 NSYMR75
800 600 200 1 66 21.8 NSYCRN86200P NSYCRN86200 NSYCRN86200T NSYMM86 NSYMS86 NSYMF86 NSYMR86
800 600 250 1 66 24.8 NSYCRN86250P NSYCRN86250 NSYCRN86250T NSYMM86 NSYMS86 NSYMF86 NSYMR86
800 600 300 1 66 26.3 NSYCRN86300P NSYCRN86300 NSYCRN86300T NSYMM86 NSYMS86 NSYMF86 NSYMR86
800 800 200 1 66 29.5 NSYCRN88200P NSYCRN88200 NSYCRN88200T NSYMM88 - NSYMF88 NSYMR88
800 800 300 1 66 32.5 NSYCRN88300P NSYCRN88300 NSYCRN88300T NSYMM88 - NSYMF88 NSYMR88
1000 600 250 1 66 28.4 NSYCRN106250P NSYCRN106250 NSYCRN106250T NSYMM106 - NSYMF106 NSYMR106
1000 600 300 1 66 30.6 NSYCRN106300P NSYCRN106300 NSYCRN106300T NSYMM106 - NSYMF106 NSYMR106
1000 800 250 1 66 34.5 NSYCRN108250P NSYCRN108250 NSYCRN108250T NSYMM108 - NSYMF108 NSYMR108
1000 800 300 1 66 37.4 NSYCRN108300P NSYCRN108300 NSYCRN108300T NSYMM108 - NSYMF108 NSYMR108
(1)
Enclosure without mounting plate.
(2)
Two cable gland plates, one on the top, one on the bottom.
PM210011-NUI900-ESE-00001_02 92 of 154
Characteristics
2
S3D
S3D
Characteristics Spacial S3D
Three steel enclosure configurations are available:
• Enclosure with plain door.
• Enclosure with plain door delivered with a galvanized plain mounting plate, not installed.
• Enclosure with glazed door, 4 mm-thick Securit ® glass.
Personnel protection • Earth connection: Spacial S3D steel enclosures are equipped with M6 x 16 earth studs welded in the body
and the door for equipotential connection. Earth braid to be ordered separately (see page 323).
• Closing the enclosure: The enclosures are equipped from the height of 600 mm with three locking points with
linkage, with a single control point, helping prevent the enclosures from being left ajar. Locks and inserts, page 85.
Material Steel
Finish Structured finish, epoxy polyester powder
Color RAL 7035 grey
Ingress protection rating • IP66 for the single-door enclosures and IP55 for the double-door enclosures, according to IEC 60529.
• cUL : Types 4, 4x and 13 for single-door enclosure and 12 and 13
Mechanical protection IK10 for the plain-door enclosures and IK08 for the glazed-door enclosures according to IEC 62262
rating Types 4, 4X and 13 for single-door and Types 12 and 13 according UL508A and CAN C22.2 No 14
Standards Compliance with enclosure standards IEC 62208
The Spacial S3D wall-mounted enclosures are compliant with the RoHS directive
Certifications • UL (cULus), BVM, DNV, LR. For Atex see page 496
(see page 712) • Types 4, 4X and 13 for the single-door enclosures and Types 12, 13 for the double-door enclosures.
according to UL508A. Information on NEMA and UL classification on page 717 and 718
Nuclear decontamination: RAL 7035 grey and AFNOR A550 tests available on demand.
More information on painting properties on page 719 and 720
• Seismic behavior: 2.5G or 3G (details page 104)
Fixing 4 (or 6 studs for widths 1000 and 1200 (see page 102 and 103)) M8 x 25 collared studs
for installing mounting plates and step slides, leaving a space of 10 mm behind them.
Supply Body
• Single-piece body (cross-shaped structure). Gutter-shaped front profile with double fold.
Flat rear
• M6 x 16 earthing screws for equipotential connection between the door and the body of the enclosure
• Cable gland plate with marking for easy drilling and to enable the maximum access surface; Delivered with the enclosure.
This plate is flush with the body of the enclosure (detail and other options on page 89)
• Direct wall-mounted (4 Ø 10 holes for the sealing plugs for the the IP) or with the help of fixing
lugs installed from the outside (to be ordered separately, see page 79)
Door
• Wall-mounted enclosure supplied with 3-mm double-bar lock as standard
• Polyurethane door gasket
• M6 x 16 earthing screws for equipotential connection between the door and the body of the enclosure
• Easily removable and reversible, with 20 mm return with double thickness granting excellent rigidity,
opening to 120°, equipped with 2 or 3 invisible hinges (from the height of 800 mm)
• Door opening to 180° with optional hinges (page 88)
• For heights from 600 mm, three locking points with linkage, with a single control point.
Simple reversal of linkage. Maximum load: 50 kg/m²
• A handle is delivered which provides 2 functions:
- Operating key
- Tool for loosening the stud protection caps.
This handle can be solidly attached to the locking system by means of a captive element
• Perforated rails on the door, with drill holes with a diameter of 4.2 mm in steps of 25 mm:
- 2 vertical rails from the height of 400 mm
- 2 vertical rails and 2 horizontal rails from the width of 800 mm
PM210011-NUI900-ESE-00001_02 93 of 154
Selection guide
2 • Ingress protection rating: IP66 for the single-door enclosures and IP55 for • Rating according UL50E: Types 4, 4X and 13 for single-door enclosures
S3D the double-door enclosures, according to IEC 60529. and Types 12 and 13 for double-door enclosures.
Dimensions (1)
Height Width Depth Doors IP Weight Plain without Plain with Glazed without Plain Silkscreened (3) Microperforated
(mm) (mm) (mm) (kg) (2) mounting plate mounting plate mounting plate
400 300 150 1 66 4.90 NSYS3D4315 NSYS3D4315P NSYS3D4315T NSYMM43 NSYMS43 NSYMF43
400 300 200 1 66 5.00 NSYS3D4320 NSYS3D4320P NSYS3D4320T NSYMM43 NSYMS43 NSYMF43
400 400 200 1 66 6.50 NSYS3D4420 NSYS3D4420P NSYS3D4420T NSYMM44 NSYMS44 NSYMF44
400 600 200 1 66 10.50 NSYS3D4620 NSYS3D4620P NSYS3D4620T NSYMM64 NSYMS64 NSYMF64
400 600 250 1 66 12.00 NSYS3D4625 NSYS3D4625P NSYS3D4625T NSYMM64 NSYMS64 NSYMF64
500 300 200 1 66 7.50 NSYS3D5320 NSYS3D5320P NSYS3D5320T NSYMM53 NSYMS53 NSYMF53
500 400 200 1 66 9.30 NSYS3D5420 NSYS3D5420P NSYS3D5420T NSYMM54 NSYMS54 NSYMF54
500 400 250 1 66 10.20 NSYS3D5425 NSYS3D5425P NSYS3D5425T NSYMM54 NSYMS54 NSYMF54
500 500 200 1 66 11.18 NSYS3D5520 NSYS3D5520P NSYS3D5520T NSYMM55 NSYMS55 NSYMF55
500 500 250 1 66 12.06 NSYS3D5525 NSYS3D5525P NSYS3D5525T NSYMM55 NSYMS55 NSYMF55
600 400 200 1 66 11.00 NSYS3D6420 NSYS3D6420P NSYS3D6420T NSYMM64 NSYMS64 NSYMF64
600 400 250 1 66 12.00 NSYS3D6425 NSYS3D6425P NSYS3D6425T NSYMM64 NSYMS64 NSYMF64
600 500 250 1 66 16.20 NSYS3D6525 NSYS3D6525P NSYS3D6525T NSYMM65 - NSYMF65
600 600 200 1 66 14.00 NSYS3D6620 NSYS3D6620P NSYS3D6620T NSYMM66 NSYMS66 NSYMF66
600 600 250 1 66 15.00 NSYS3D6625 NSYS3D6625P NSYS3D6625T NSYMM66 NSYMS66 NSYMF66
600 600 300 1 66 17.00 NSYS3D6630 NSYS3D6630P NSYS3D6630T NSYMM66 NSYMS66 NSYMF66
600 600 400 1 66 19.00 NSYS3D6640 NSYS3D6640P NSYS3D6640T NSYMM66 NSYMS66 NSYMF66
600 800 300 1 66 25.50 NSYS3D6830 NSYS3D6830P NSYS3D6830T NSYMM86 NSYMS86 NSYMF86
700 500 250 1 66 15.00 NSYS3D7525 NSYS3D7525P NSYS3D7525T NSYMM75 NSYMS75 NSYMF75
800 600 200 1 66 21.00 NSYS3D8620 NSYS3D8620P NSYS3D8620T NSYMM86 NSYMS86 NSYMF86
800 600 250 1 66 23.00 NSYS3D8625 NSYS3D8625P NSYS3D8625T NSYMM86 NSYMS86 NSYMF86
800 600 300 1 66 25.00 NSYS3D8630 NSYS3D8630P NSYS3D8630T NSYMM86 NSYMS86 NSYMF86
800 600 400 1 66 29.00 NSYS3D8640 NSYS3D8640P NSYS3D8640T NSYMM86 NSYMS86 NSYMF86
800 800 250 1 66 30.00 NSYS3D8825 NSYS3D8825P NSYS3D8825T NSYMM88 - NSYMF88
800 800 300 1 66 32.00 NSYS3D8830 NSYS3D8830P NSYS3D8830T NSYMM88 - NSYMF88
800 1000 300 1 66 38.00 NSYS3D81030 NSYS3D81030P - NSYMM108 - NSYMF108
800 1000 300 2 55 43.50 NSYS3D81030D NSYS3D81030DP - NSYMM108 - NSYMF108
800 1200 300 2 55 46.00 NSYS3D81230D NSYS3D81230DP - NSYMM128 - NSYMF128
PM210011-NUI900-ESE-00001_02 94 of 154
Spacial SM, Characteristics
SM
Characteristics Compact enclosures Spacial SM
• Compact body with a front rigid frame with welded corners and rear panel supports
installed in depth to adjust and fix the equipment with a pitch of 25 mm
Basic composition • The double doors are overlapping, with system for fixing the left door
• Door reversible, 120° opening
• Welded rear panel
• System with 4 locking points with handle and 5-mm double-bar insert
• Cable gland plate 1 entry
• Mounting plate support brackets
Versions / Configurations • Compact enclosure with plain door and mounting plate
• Compact enclosure with plain door and without mounting plate
• Compact enclosure with transparent Securit ® glass door and without mounting plate
Protection of personnel Earthing accessories needed to ensure the grounding continuity, page 323
Material Steel
Finish Structured finish, epoxy polyester powder
Color RAL 7035 grey
Ingress protection rating IP55 according to IEC 60529
Mechanical protection rating IK10 for plain door and IK08 for transparent door according to IEC 62262
Standards Compliance with enclosure standard IEC 62208 and the RoHS and REACH directive
Certifications BVM, UL (cULus), Rating according UL50E : single-door enclosures : Types 1, 2, 3R, 5 and 13. double-door enclosures Types 1, 12
Installation * Compliant with IEC 62208 regarding type tests specified in §9.12 (resistance to UV radiation) and §9.13 (resistance to corrosion)
Canopy needed to avoid water stagnation on the upper part of the enclosure, page 135
Maximum load 500 kg
Options • Plinths, heights 100 mm and 200 mm, page 126
• Lifting eyebolts, page 134
• Internal door, page 139
• Door accessories, page 141
• Other locking options, page 144
• Mounting plates and Telequick system, page 265
PM210011-NUI900-ESE-00001_02 95 of 154
Spacial SF, Characteristics
SF SF kit
Suitable enclosures Spacial SF - supplied assembled Suitable enclosures Spacial SF - supplied as kit
• Structure made up of vertical uprights joined with top and bottom frames
• Panels and doors built into the structure
• Formed from a single section and perforated structure with a pitch of 25 mm
• Front door with a reinforcement frame (horizontal rails height-adjustable) • Front door with a reinforcement frame (horizontal rails height-adjustable)
• The double doors are overlapping, with system for fixing the left door • The double doors are overlapping, with system for fixing the left door
• Door reversible, 120° opening • Door reversible, 120° opening
• Rear panel screwed on with captive screws • Rear panel to be screwed on with captive screws
• Removable roof • Removable roof delivered with top frame
• System with 4 locking points with handle and 5-mm double-bar insert • System with 4 locking points with handle and 5-mm double-bar insert
• Mounting plate support brackets (for widths from 600 mm) • Mounting plate support brackets delivered with top and bottom frames kit
• Mounting plate sliding rails (for widths from 600 mm) (for widths from 600 mm)
• 2 quick-fixing cross-rails • Mounting plate sliding rails delivered with top and bottom frames kit
(for heights from 1800 mm, widths from 600 mm and depths from 500 mm) (for widths from 600 mm)
• 2 quick-fixing cross-rails delivered with top and bottom frames kit
(for frames with widths from 600 mm and depths from 500 mm)
• Modular enclosure with plain door and mounting plate • Uprights kit
• Modular enclosure with plain door and without mounting plate • Top and bottom frames kit
• Modular enclosure with transparent Securit ® glass door and • Rear panel kit
without mounting plate • Door kit (plain or transparent)
Earthing accessories needed to ensure the grounding continuity
Steel
Structured finish, epoxy polyester powder
RAL 7035 grey
IP55 according to IEC 60529 (with side panels and cable entry plates)
IK10 for plain door and IK08 for transparent door according to IEC 62262
Compliance with enclosure standard IEC 62208 and the RoHS and REACH directive
BV, BVM, DNV, UL (cULus) Rating according UL50E : Types 1, 3R, 12
1000 kg
• Side panels options, page 122 • Side panels options, page 122
• Enclosure suites options, page 123 • Enclosure suites options, page 123
• Plinths, heights 100 mm and 200 mm, page 124 • Plinths, heights 100 mm and 200 mm, page 124
• Cable gland plates, page 130 • Cable gland plates, page 130
• Lifting systems, page 134 • Lifting systems, page 134
• Roof options, page 136 • Roof options, page 136
• Door accessories, page 141 • Other locking options, page 144
• Other locking options, page 144 • Mounting plates and Telequick system, page 265
• Mounting plates and Telequick system, page 265
PM210011-NUI900-ESE-00001_02 96 of 154
Selection guide
3
Dimensions
Height Width Depth Doors Plain door, Plain door, Transparent door, Front kit (corners Side panels,
(mm) (mm) (mm) without mounting plate with mounting plate without mounting plate + front panels) 2 u.
1200 800 300 1 NSYSM12830 NSYSM12830P - NSYSPF8100 NSYSPS3100
1200 1000 300 2 NSYSM1210302D NSYSM1210302DP - NSYSPF10100 NSYSPS3100
1200 1200 400 2 NSYSM1212402D NSYSM1212402DP - NSYSPF12100 NSYSPS4100
PM210011-NUI900-ESE-00001_02 97 of 154
Spacial SF und Spacial SM
3 Dimensions
(A) (B) (C)
Height Width Depth Doors Plain door, without Plain door, with Transparent door, Plain Plain 1 entry 2 entries
(mm) (mm) (mm) mounting plate mounting plate without mounting plate
1200 600 400 1 NSYSF12640 NSYSF12640P - NSY2SP124 NSYEC64 NSYEC641 -
1200 600 600 1 NSYSF12660 NSYSF12660P - NSY2SP126 NSYEC66 NSYEC661 NSYEC662
1200 800 400 1 NSYSF12840 NSYSF12840P - NSY2SP124 NSYEC84 NSYEC841 -
1200 800 600 1 NSYSF12860 NSYSF12860P - NSY2SP126 NSYEC86 NSYEC861 NSYEC862
PM210011-NUI900-ESE-00001_02 98 of 154
Functions Introduction
and characteristics General characteristics of the
Compact NSX range
Compact NSX circuit breakers and auxiliaries comply with the following:
1 b international recommendations:
2 v IEC 60947-1: general rules
v IEC 60947-2: circuit breakers
NSX250 H 3 v IEC 60947-3: switch-disconnectors
v IEC 60947-4: contactors and motor starters
4 v IEC 60947-5.1 and following: control circuit devices and switching elements;
100 100
automatic control components
70 70 5
65 65 b European (EN 60947-1 and EN 60947-2) and corresponding national standards:
50 50 6 v France NF
35 35
10 10 v Germany VDE
v United Kingdom BS
v Australia AS
7 v Italy CEI
b the specifications of the marine classification companies (Veritas, Lloyd's Register
8 of Shipping, Det Norske Veritas, etc.), standard NF C 79-130 and recommendations
9 issued by the CNOMO organisation for the protection of machine tools.
100
65 10 For U.S. UL, Canadian CSA, Mexican NOM and Japanese JIS standards, please
35
consult us.
Environment
Compact NSX respects the European environment directive EC/2002/95 concerning
the restriction of hazardous substances (RoHS).
Product environment profiles (PEP) have been prepared, describing the
environmental impact of every product throughout its life cycle, from production to
the end of its service life.
All Compact NSX production sites have set up an environmental management
system certified ISO 14001.
Each factory monitors the impact of its production processes. Every effort is made to
prevent pollution and to reduce consumption of natural resources.
Ambient temperature
b Compact NSX circuit breakers may be used between -25 °C and +70 °C. For
temperatures higher than 40°C (65°C for circuit breakers used to protect motor
feeders), devices must be derated (pages B-8 and B-9).
b Circuit breakers should be put into service under normal ambient, operating-
temperature conditions. Exceptionally, the circuit breaker may be put into service
when the ambient temperature is between -35 °C and -25 °C.
b The permissible storage-temperature range for Compact NSX circuit breakers in
the original packing is -50 °C (1) and +85 °C.
PM210011-NUI900-ESE-00001_02 99 of 154
Discrimination
Compact NSX reinforces the discrimination capabilities of the Compact NS range by
applying the rapid calculation capacity of the Micrologic trip units.
Total discrimination is now possible between NSX100 and modular Multi 9 circuit
breakers rated y 63 A (see page A-8).
indication
All Compact NSX circuit breakers are suitable for isolation as defined in IEC
standard 60947-2:
b The isolation position corresponds to the O (OFF) position.
b The operating handle cannot indicate the OFF position unless the contacts are
effectively open.
b Padlocks may not be installed unless the contacts are open.
Installation of a rotary handle or a motor mechanism does not alter the reliability of
the position-indication system.
The isolation function is certified by tests guaranteeing:
b the mechanical reliability of the position-indication system
b the absence of leakage currents
b overvoltage withstand capacity between upstream and downstream connections.
The tripped position does not insure isolation with positive contact indication.
Only the OFF position guarantees isolation.
DB112093
Degree of protection
The following indications are in accordance with standards IEC 60529 (IP degree of
protection) and IEC 62262 (IK protection against external mechanical impacts).
Bare circuit breaker with terminal shields
b With toggle: IP40, IK07.
b With standard direct rotary handle / VDE: IP40 IK07
Circuit breaker installed in a switchboard
b With toggle: IP40, IK07.
b With direct rotary handle:
v standard / VDE: IP40, IK07
v MCC: IP43 IK07
v CNOMO: IP54 IK08
b With extended rotary handle: IP56 IK08
b With motor mechanism: IP40 IK07.
Common characteristics
Rated voltages
Insulation voltage (V) Ui 800
Impulse withstand voltage Uimp 8
(kV)
Operational voltage (V) Ue AC 50/60 Hz 690
Suitability for isolation IEC/EN 60947-2 yes
Utilisation category A
Pollution degree IEC 60664-1 3
Circuit breakers
Breaking capacity levels
Electrical characteristics as per IEC 60947-2
Rated current (A) In 40 °C
Number of poles
Compact NSX100/160/250. Breaking capacity (kA rms)
lcu AC 50/60 Hz 220/240 V
380/415 V
440 V
PB103279-44
500 V
525 V
660/690 V
Service breaking capacity (kA rms)
lcs AC 50/60 Hz 220/240 V
380/415 V
440 V
500 V
525 V
660/690 V
Durability (C-O cycles) Mechanical
Electrical 440 V In/2
In
690 V In/2
In
Characteristics as per Nema AB1
Breaking capacity (kA rms) AC 50/60 Hz 240 V
480 V
600 V
Characteristics as per UL 508
Breaking capacity (kA rms) AC 50/60 Hz 240 V
480 V
Compact NSX400/630.
600 V
Protection and measurements
Short-circuit protection Magnetic only
Overload / short-circuit protection Thermal magnetic
Electronic
with neutral protection (Off-0.5-1-OSN) (1)
with ground-fault protection
with zone selective
interlocking (ZSI) (2)
Display / I, U, f, P, E, THD measurements / interrupted-current measurement
Options Power Meter display on door
Operating assistance
Counters
Histories and alarms
Metering Com
Device status/control Com
Earth-leakage protection By Vigi module
By Vigirex relay
Installation / connections
Dimensions and weights
Dimensions (mm) Fixed, front connections 2/3P
WxHxD 4P
Weight (kg) Fixed, front connections 2/3P
4P
(1) OSN: Over Sized Neutral protection for neutrals carrying Connections
high currents (e.g. 3rd harmonics). Connection terminals Pitch With/without spreaders
(2) ZSI: Zone Selective Interlocking using pilot wires.
(3) 2P circuit breaker in 3P case for B and F types, only with Large Cu or Al cables Cross-section mm²
thermal-magnetic trip unit.
40 85 90 100 120 150 40 85 90 100 120 150 40 85 90 100 120 150 40 85 100 120 150 40 85 100 120 150
25 36 50 70 100 150 25 36 50 70 100 150 25 36 50 70 100 150 36 50 70 100 150 36 50 70 100 150
20 35 50 65 90 130 20 35 50 65 90 130 20 35 50 65 90 130 30 42 65 90 130 30 42 65 90 130
15 25 36 50 65 70 15 30 36 50 65 70 15 30 36 50 65 70 25 30 50 65 70 25 30 50 65 70
- 22 35 35 40 50 - 22 35 35 40 50 - 22 35 35 40 50 20 22 35 40 50 20 22 35 40 50
- 8 10 10 15 20 - 8 10 10 15 20 - 8 10 10 15 20 10 10 20 25 35 10 10 20 25 35
40 85 90 100 120 150 40 85 90 100 120 150 40 85 90 100 120 150 40 85 100 120 150 40 85 100 120 150
25 36 50 70 100 150 25 36 50 70 100 150 25 36 50 70 100 150 36 50 70 100 150 36 50 70 100 150
20 35 50 65 90 130 20 35 50 65 90 130 20 35 50 65 90 130 30 42 65 90 130 30 42 65 90 130
7.5 12.5 36 50 65 70 15 30 36 50 65 70 15 30 36 50 65 70 25 30 50 65 70 25 30 50 65 70
- 11 35 35 40 50 - 22 35 35 40 50 - 22 35 35 40 50 10 11 11 12 12 10 11 11 12 12
- 4 10 10 15 20 - 8 10 10 15 20 - 8 10 10 15 20 10 10 10 12 12 10 10 10 12 12
50000 40000 20000 15000 15000
50000 20000 20000 12000 8000
30000 10000 10000 6000 4000
20000 15000 10000 6000 6000
10000 7500 5000 3000 2000
40 85 90 100 120 150 40 85 90 100 120 150 40 85 90 100 120 150 40 85 100 120 150 40 85 100 120 150
20 35 50 65 90 130 20 35 50 65 90 130 20 35 50 65 90 130 30 42 65 90 130 30 42 65 90 130
- 8 20 35 40 50 - 20 20 35 40 50 - 20 20 35 40 50 - 20 35 40 50 - 20 35 40 50
- 85 85 85 - - - 85 85 85 - - - 85 85 85 - - 85 85 85 - - 85 85 85 - -
- 25 50 65 - - - 35 50 65 - - - 35 50 65 - - 35 50 65 - - 35 50 65 - -
- 10 10 10 - - - 10 10 10 - - - 15 15 15 - - 20 20 20 - - 20 20 20 - -
b b b b b
b b b - -
b b b b b
b b b b b
b b b b b
b b b b b
b b b b b
b b b b b
b b b b b
b b b b b
b b b b b
b b b b b
b b b b b
b b b b b
b b b b b
105 x 161 x 86 105 x 161 x 86 105 x 161 x 86 140 x 255 x 110 140 x 255 x 110
140 x 161 x 86 140 x 161 x 86 140 x 161 x 86 185 x 255 x 110 185 x 255 x 110
2.05 2.2 2.4 6.05 6.2
2.4 2.6 2.8 7.90 8.13
LV430870 LV430875
Compact NSX250B (25 kA at 380/415 V)
Rating 3P 3d 4P 3d, 4d, 3d + N/2, 3d + OSN
100 LV431147 LV431157
160 LV431146 LV431156
250 LV431145 LV431155
With electronic trip unit Micrologic 5.2 E (LSI protection, energy meter)
To be ordered with 2 catalogue numbers: 1 basic frame + 1 trip unit
With electronic trip unit Micrologic 6.2 E (LSIG protection, energy meter)
To be ordered with 2 catalogue numbers: 1 basic frame + 1 trip unit
ComPacT NSX100/160/250B
With thermal-magnetic trip unit TM-D
ComPacT NSX100B (25 kA at 380/415 V)
DB438166.ai
Rating 3P 3d 4P 3d 4P 4d
TM16D C10B3TM016 C10B6TM016 C10B4TM016
TM25D C10B3TM025 C10B6TM025 C10B4TM025
TM32D C10B3TM032 C10B6TM032 C10B4TM032
Ii
Trip
2250
2500
1500
1250
TM25
0D
250 A/40°
C Ir
Ii TM40D C10B3TM040 C10B6TM040 C10B4TM040
TM50D C10B3TM050 C10B6TM050 C10B4TM050
Ir 2000 1750 2.2
ogic
175 MicroL
200
A
250
225
A
Isd 5 6
4 7
Ir .95 .96 3 8
% >105% .94 .97
>90
Io 2
ALARM
Ir 160 175 10
.93
READY
ALARM
.97
Vigi
0 t(ms)
READY
Ir Io 63 70 2
switch
.93 10
55 80 .98 1.5 xIr
C16B32D160 C16B42D160
50 .92 1
160
90 .9
45 xIo
100
40
(A)
Ir
250
225
A
200
175
Ii
Trip
2500
2250
2000 1750
A
1250
1500
TM25
0D
250 A/40°
C Ir
Ii
ComPacT NSX160B (25 kA 380/415V)
Rating 3P 3d 4P 4d, 3d + N/2
F
100 A C16B34V100 C16B44V100
160 A C16B34V160 C16B44V160
ComPacT NSX250B (25 kA 380/415V)
Rating 3P 3d 4P 4d, 3d + N/2
100 A C25B34V100 C25B44V100
160 A C25B34V160 C25B44V160
250 A C25B34V250 C25B44V250
With electronic trip unit MicroLogic Vigi 7.2 E (LSIR protection)
ComPacT NSX100B (25 kA 380/415V)
DB438567.ai
Electrical auxiliaries
Auxiliary contacts (changeover)
OF or SD or SDE or SDV
DB112254
29450
OF or SD or SDE or SDV low level 29452
SDE adapter, mandatory for trip unit TM, MA or Micrologic 2 LV429451
LV429532
SDTAM contactor tripping module (early-break thermal fault signal) for Micrologic 2.2-M/6.2 E-M
SDTAM 24/415 V AC/DC overload fault indication
DB112276
LV429424
Voltage releases
Voltage
DB111454
MX MN
AC 24 V 50/60 Hz LV429384 LV429404
48 V 50/60 Hz LV429385 LV429405
110-130 V 50/60 Hz LV429386 LV429406
220-240 V 50/60 Hz and 208-277 V 60 Hz LV429387 LV429407
380-415 V 50 Hz and 440-480 V 60 Hz LV429388 LV429408
525 V 50 Hz and 600 V 60 Hz LV429389 LV429409
DC 12 V LV429382 LV429402
24 V LV429390 LV429410
30 V LV429391 LV429411
48 V LV429392 LV429412
60 V LV429383 LV429403
125 V LV429393 LV429413
250 V LV429394 LV429414
MN 48 V 50/60 Hz with fixed time delay
DB115631
OK
Mode
With electronic trip unit Micrologic 5.3 E (LSI protection, energy meter)
To be ordered with 2 catalogue numbers: 1 basic frame + 1 trip unit
With electronic trip unit Micrologic 6.3 E (LSIG protection, energy meter)
To be ordered with 2 catalogue numbers: 1 basic frame + 1 trip unit
With electronic trip unit Micrologic 6.3 E-M (LSIG motor protection, energy meter)
To be ordered with 2 catalogue numbers: 1 basic frame + 1 trip unit
ComPacT NSX400/630F
Electronic trip unit MicroLogic 2.3 (LSOI protection)
3P 3d 4P 3d, 4d, 3d + N/2
DB438189.ai
rip
.95 .96
.94 .97
.93
.98
.92 1
.9
x Io
rip
MicroLogic 4.3
3A 5A
1A
10A
500
>105%
>90% OFF
ALARM
Ir 300
READY
mA
li=4800A
150 500
Isd
5 6
4 7 60 1000
Ir
.95 .96 3 0 t(ms)
.94 8
Io .97
250 280 2
.93 10
230 320 .98 1.5 xIr
200 .92 1
360 .9
xIo
180 400
160 (A)
50-60Hz
0V max
Ue=44
Electronic trip unit MicroLogic Vigi 7.3 E (LSIR protection + embedded energy management)
3P 3d 4P 4d, 3d + N/2
DB438568.ai
rip
rip
With electronic trip unit MicroLogic 5.3 E (LSI protection, energy meter)
Only available as separate component or through online configurator (product selector)
With electronic trip unit MicroLogic 6.3 E (LSIG protection, energy meter)
Only available as separate component or through online configurator (product selector)
With electronic trip unit MicroLogic 6.3 E-M (LSIG motor protection, energy meter)
Only available as separate component or through online configurator (product selector)
With electronic trip unit MicroLogic 7.3 E (LSIG protection, energy meter)
Only available as separate component or through online configurator (product selector)
Electrical auxiliaries
Auxiliary contacts (changeover)
OF or SD or SDE or SDV
DB112254
29450
OF or SD or SDE or SDV low level 29452
LV429532
SDTAM contactor tripping module (early-break thermal fault signal) for Micrologic 2.3-M/6.3 E-M
SDTAM 24/415 V AC/DC overload fault indication
DB112276
LV429424
Voltage releases
Voltage
DB111454
MX MN
AC 24 V 50/60 Hz LV429384 LV429404
48 V 50/60 Hz LV429385 LV429405
110-130 V 50/60 Hz LV429386 LV429406
220-240 V 50/60 Hz and 208-277 V 60 Hz LV429387 LV429407
380-415 V 50 Hz and 440-480 V 60 Hz LV429388 LV429408
525 V 50 Hz and 600 V 60 Hz LV429389 LV429409
DC 12 V LV429382 LV429402
24 V LV429390 LV429410
30 V LV429391 LV429411
48 V LV429392 LV429412
60 V LV429383 LV429403
125 V LV429393 LV429413
250 V LV429394 LV429414
MN 48 V 50/60 Hz with fixed time delay
DB115631
CEI/EN 60947-2
DB116619
BS/EN 60898-1
bb Disbo iC60N circuit breakers are multi-standard circuit breakers which combine
the following functions:
vv circuit protection against short-circuit currents,
vv circuit protection against overload currents,
vv suitable for industrial isolation according to IEC/EN 60947-2, standard.
vv fault tripping indication by a red mechanical indicator in circuit breaker front face. A
Alternating current (AC) 50/60 Hz
PB111066-40
PB111070-40
Catalogue numbers
Disbo iC60N circuit breaker
Type 1P 2P
E45092
E45094
Auxiliaries See page E-2 and F-22 See page E-2 and F-22
Rating (In) Curve Curve
B C D B C D
0.5 A A9F43170 A9F44170 A9F45170 A9F43270 A9F44270 A9F45270
1A A9F43101 A9F44101 A9F45101 A9F43201 A9F44201 A9F45201
2A A9F43102 A9F44102 A9F45102 A9F43202 A9F44202 A9F45202
3A A9F43103 A9F44103 A9F45103 A9F43203 A9F44203 A9F45203
4A A9F43104 A9F44104 A9F45104 A9F43204 A9F44204 A9F45204
6A A9F43106 A9F44106 A9F45106 A9F43206 A9F44206 A9F45206
10 A A9F43110 A9F44110 A9F45110 A9F43210 A9F44210 A9F45210
16 A A9F43116 A9F44116 A9F45116 A9F43216 A9F44216 A9F45216
20 A A9F43120 A9F44120 A9F45120 A9F43220 A9F44220 A9F45220
25 A A9F43125 A9F44125 A9F45125 A9F43225 A9F44225 A9F45225
32 A A9F43132 A9F44132 A9F45132 A9F43232 A9F44232 A9F45232
40 A A9F43140 A9F44140 A9F45140 A9F43240 A9F44240 A9F45240
50 A A9F43150 A9F44150 A9F45150 A9F43250 A9F44250 A9F45250
63 A A9F43163 A9F44163 A9F45163 A9F43263 A9F44263 A9F45263
Width in 9-mm modules 2 4
Accessories See page E-2 and E-10 See page E-2 and E-10
3P 4P
E45095
E45097
See page E-2 and F-22 See page E-2 and F-22
Curve Curve
B C D B C D
A9F43370 A9F44370 A9F45370 A9F43470 A9F44470 A9F45470
A9F43301 A9F44301 A9F45301 A9F43401 A9F44401 A9F45401
A9F43302 A9F44302 A9F45302 A9F43402 A9F44402 A9F45402
A9F43303 A9F44303 A9F45303 A9F43403 A9F44403 A9F45403
A9F43304 A9F44304 A9F45304 A9F43404 A9F44404 A9F45404
A9F43306 A9F44306 A9F45306 A9F43406 A9F44406 A9F45406
A9F43310 A9F44310 A9F45310 A9F43410 A9F44410 A9F45410
A9F43216 A9F44316 A9F45316 A9F43416 A9F44416 A9F45416
A9F43220 A9F44320 A9F45320 A9F43420 A9F44420 A9F45420
A9F43225 A9F44325 A9F45325 A9F43425 A9F44425 A9F45425
A9F43232 A9F44332 A9F45332 A9F43432 A9F44432 A9F45432
A9F43240 A9F44340 A9F45340 A9F43440 A9F44440 A9F45440
A9F43250 A9F44350 A9F45350 A9F43450 A9F44450 A9F45450
A9F43263 A9F44363 A9F45363 A9F43463 A9F44463 A9F45463
6 8
See page E-2 and E-10 See page E-2 and E-10
DB122945
DB122946
DB122935
DB118789
DB118787
A
0.5 to 25 A 2 N.m 1 to 25 mm2 1 to 16 mm2 - Ø 5 mm - -
32 to 63 A 3.5 N.m 1 to 35 mm2 1 to 25 mm2 50 mm2 3 x 16 mm2 3 x 10 mm2
DB123310
Technical data
Main characteristics
According to IEC/EN 60947-2
Insulation voltage (Ui) 500 V AC
Pollution degree 3
Rated impulse withstand voltage (Uimp) 6 kV
Clip on DIN rail 35 mm.
Thermal tripping Reference temperature 50 °C
DB405583
Circuit-breaker
Type Disbo iC60N
1P 125
2P 250
3P 375
4P 500
IEC 61009-1,
IEC 61009-2-2
Accessory
Padlocking device
bb Used to lock the toggle in the "open" or "closed" position by 4 mm diameter
padlock (not supplied).
Catalogue numbers
iC60H RCBO 10000
1P+N A Width in 9-mm
modules
B curve Voltage rating (V) Sensitivity (IΔn) 30 mA 100 mA
240 Rating 6A A9D34806 - 2
DB405038
(In) 10 A A9D34810 -
16 A A9D34816 -
20 A A9D34820 -
25 A A9D34825 -
32 A A9D34832 -
40 A A9D34840 -
45 A A9D34845 -
C curve Voltage rating (V) Sensitivity (IΔn)
240 Rating 6A A9D14806 A9D15806 2
DB405038
Accessory
Type
Padlocking device (bag of 10 pieces) A9A27049
Technical data
Main characteristics iC60N RCBO iC60H RCBO iC60H2 RCBO
Insulation voltage (Ui) 400 V AC
Rated impulse withstand voltage (Uimp) 4 kV
Rated residual operating current (IΔn) 30 mA 10, 30, 100 mA 30 mA
Thermal tripping Reference temperature 50°C
Temperature derating See the Technical Guide
Limitation class 3
Surge current withstand (8/20 μs) without tripping 250 Â
Rated nominal breaking capacity (Icn) 6,000 A 10,000 A 10,000 A
Phase/earth rated residual breaking and making capacity (IΔm) 6,000 A 7,500 A 7,500 A
Additional characteristics
Degree of protection Device only IP20
Device in modular enclosure IP40
Endurance (O-C) Electrical 5,000 cycles
Mechanical 20,000 cycles
Operating temperature -15°C to +60°C
Storage temperature -40°C to +85°C
Tropicalization Treatment 2 (relative humidity: 95 % at 55°C)
IP20 IP40
DB404953
DB123309
DB123313
Weight (g)
Indifferent position of installation.
iC60 RCBO
iC60N RCBO 205
iC60H RCBO 205
iC60H2 RCBO 332
Dimensions (mm)
DB405565
IEC/EN 61008-1
DB116619
PB104473-40
Catalogue numbers
iID residual current circuit breakers
Type AC Width in 9 mm
Product iID module
Auxiliaries See page E-2 and F-2
2P Sensitivity 10 mA 30 mA 100 mA 300 mA 500 mA 300 mA s 500 mA s
Rating 16 A A9R10216 - - - - - - 4
DB122476
25 A
40 A
A9R10225
-
A9R71225
A9R71240
-
A9R12240
A9R74225
A9R74240
A9R16225
A9R16240
-
-
-
-
B
63 A - A9R71263 A9R12263 A9R74263 A9R16263 A9R15263 -
80 A - A9R11280 A9R12280 A9R14280 - A9R15280 -
100 A - A9R11291 A9R12291 A9R14291 - A9R15291 -
Connections
■ screw clamp terminals or connectors
Rated operational voltage 690 V
Rated operational current Ie max AC-3 (Ue ≤ 440V) 9A 12 A 18 A 25 A 32 A 38 A
Ie AC-1 (θ ≤ 60° C) 25 A 32 A 40 A 50 A
Rated operational power 220/240 V 2.2 kW 3 kW 4 kW 5.5 kW 7.5 kW 9 kW
in category AC3 380/400 V 4 kW 5.5 kW 7.5 kW 11 kW 15 kW 18.5 kW
415/440 V 4 kW 5.5 kW 9 kW 11 kW 15 kW 18.5 kW
500 V 5.5 kW 7.5 kW 10 kW 15 kW 18.5 kW 18.5 kW
660/690 V 5.5 kW 7.5 kW 10 kW 15 kW 18.5 kW 18.5 kW
1000 V – – – – – –
Contactor type * LC1-D09 LC1-D12 LC1-D18 LC1-D25 LC1-D32 LC1-D38
Reversing contactor type * with mechanical interlock LC2-D09 LC2-D12 LC2-D18 LC2-D25 LC2-D32 LC2-D38
(1)
■ spring terminals
Add the figure 3 before the voltage code. Example LC1-D09P7 becomes LC1-093P7
(2)
■ lug-clamps
Add the figure 6 before the voltage code. Example LC1-D09P7 becomes LC1-096P7
■ Faston connectors (3)
2 x 6.35 (power) and 1 x 6.35 (control) up to D12 only
Add the figure 9 before the voltage code. Example LC1-D09P7 becomes LC1-099P7
* Basic reference to be completed by adding the coil voltage
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range Acti 9
Product name Acti 9 STI
Product or component type Fuse-disconnector
Device short name STI
Poles description 1P
Complementary
[In] rated current 2A
4A
6A
10 A
16 A
20 A
25 A
Fuse curve AM
GG
Fuse size 10.3 x 38 mm
[Ue] rated operational voltage 500 V AC
[Ui] rated insulation voltage 500 V AC 50/60 Hz
Mounting mode Clip-on
Mounting support DIN rail
9 mm pitches 2
Height 81 mm
Width 18 mm
Depth 75 mm
Colour White
Connections - terminals Screw clamp terminals1 cable(s) 0.75…10 mm² rigid
Screw clamp terminals1 cable(s) 0.5…6 mm² flexible
Screw clamp terminals2 cable(s) 0.75…4 mm² rigid
Screw clamp terminals2 cable(s) 0.5…6 mm² flexible
PM210011-NUI900-ESE-00001_02 116 of 154
Wire stripping length 12 mm
Tightening torque 2 N.m
Environment
Standards IEC 60269-1/2
IEC EN 60947-3
IP degree of protection IP20
Pollution degree 3
Ambient air temperature for operation -20…60 °C
Ambient air temperature for storage -40…80 °C
Offer Sustainability
Sustainable offer status Green Premium product
REACh Regulation REACh Declaration
REACh free of SVHC Yes
EU RoHS Directive Compliant
EU RoHS Declaration
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure Product Environmental Profile
WEEE The product must be disposed on European Union markets following specific waste collection and
never end up in rubbish bins
Presentation
The Harmony® XB7 range of plastic control and signaling units is a monolithic range
designed for use in the industrial, tertiary and building sectors. It is simple to use
and quick to install.
signaling functions)
b The range comprises complete units, with round plastic bezel, and 6 pilot light
b
colors.
The two types of pilot lights are for direct supply or with resistor.
Installation
b Harmony XB7 products are both simple and quick to install:
b
Environment
The performance features of the XB7 range meet the following specifications:
v For the entire range: EN/IEC 60947-1, EN/IEC 60947-5-1, EN/IEC 60947-5-4,
v
EN/IEC 60204-1
v For Emergency switching off pushbuttons: EN/IEC 60364-5-53
v
b Degrees of protection:
b
Pilot lights
With integral LED
Shape of Type of light Color of Sold in Unit reference by supply voltage (1) Weight
head source lens lots of 24 V a/c 120 V a 230 V a kg/lb
(included)
PF100406
XB7EV08BP
Yellow 10 XB7EV05BP XB7EV05GP XB7EV05MP 0.020/0 044
.
for 130 V,
2.6 W bulb Red 10 XB7EV74P XB7EV740P 0.020/0 044
XB7EV75P Supply voltage:
.
230 V a,
Yellow 10 XB7EV75P XB7EV750P 0.020/0 044
50-60 Hz
.
base fitting
incandescent Red 10 – XB7EV64P 0.020/0 044
bulb
.
Supply voltage:
Yellow 10 – XB7EV65P 0.020/0 044
y 250 V
.
(2)
Blue 10 – XB7EV66P 0.020/0 044
.
black
1 1 2, stay put 10 XB7ND25 0.026/0 057
.
XB7ND21
2 – 3, stay put 10 XB7ND33 0.026/0 057
.
in LH position
2 – 3, key 10 XB7NG33 0.050/0 110
.
withdrawal
XB7NG33 in centre
position
(1) For Faston connection version (1 x 6.35 mm/0.04 x 0.24 in. and 2 x 2.8 mm/0.08 x 0.11 in. ), add the number “3” to the end of
the reference.
Example: XB7EV07BP becomes XB7EV07BP3.
(2) Bulb characteristics for direct supply pilot lights: 250 V, 2.6 W.
(3) The symbol “ ” indicates key withdrawal position.
Installation
Harmony XB5 products are both simple and quick to install:
b Mounting by single installer (self-maintaining head in its cut-out)
b Clip-together component system (head, body, contact blocks, and LED)
b Anti-loosening system for screw clamp terminals on contact blocks
Harmony XB5 standard mounting products are installed with or without a notch in a
Ø 22 mm/0.866 in. hole, thanks to the self-cleavable orientation pin.
Harmony XB5 flush mounting products are installed without a notch in a Ø 30 mm/
1.181 in. hole. This gives flush mounting products the same actuating area as that
of standard mounting products, offering optimized ergonomics for operators even
when wearing gloves.
Flush solutions mounted in a Ø 22 mm/0.866 in. hole can be achieved using the
Harmony XB6 range. Please refer to the Harmony XB6 catalog for details.
Environment
The performance of the Harmony XB5 range meets some of the most demanding
international standards and approvals:
Standard handle, green Add suffix 03 to the reference, for example: ZB5AD203 ZB5AD203C0
Standard handle, red Add suffix 04 to the reference, for example: ZB5AD204 ZB5AD204C0
ZB5AD204 Standard handle, yellow Add suffix 05 to the reference, for example: ZB5AD205 ZB5AD205C0
Standard handle, blue Add suffix 06 to the reference, for example: ZB5AD206 ZB5AD206C0
(1) For recommended maximum number of contacts and sequence of contacts constituting the body (fixing collar and contact)
associated with the head, see page 22.
(2) For white color plated bezel replace C0 with C1, and for other color plated bezels using the web customization tool, see page 5.
(3) To add customized markings on these references using the web customization tool, see page 5.
Mechanical thermostats
Thermal control
14
CC LED display
• Display visible even in the dark.
Thermofan
160
Combination of a resistance heater and an axial
fan to ensure uniform heating of the enclosure.
• Fixing by clip on a DIN rail.
• Thermostat adjustable from 0…+60 ºC.
• Visual operation indicator. 97 120
14
CR
DB126090.eps
DB126091.eps
1P
x RH2
Vigire
RH21M
Vigirex
DB126092.eps
DB126093.eps
9P
x RH9
Vigire
RH99M
Vigirex
DB126094.eps
on
Fault
50%
97P
x RH1
Vigire 40%
30%
20%
.5 1
.25 2.5
.1 .15
.15 5
.075 .2
0
.05 .3
.03
x1
/M
60947-2
IEC
Test
Reset
Sensors
Closed toroids, A-type
Type Ie (A) Inside diameter (mm)
DB126098.eps
Rectangular sensors
Inside dimensions (mm) Ie (A)
DB126100.eps
Communication module
DC150 data concentrator 50823
DB403922.eps
110-240 V AC / 115-125 V DC
9600
19200
5
3 7
1 9
N°1 N°2 N°1
15
13
5
3 7
1 9 N°2
15
13
Note: sensor-relay link: twisted cable not supplied (see “Installation and connection” chapter).
1IC 7242
Photocell lighting control switch for wall-mounting and/or pole installation
• Power supply 230V a.c. 50 / 60Hz • Intervention threshold adjustment trimmer, 2 - 200 Lux
• Outdoor installation • Threshold signalling LED
• Output 1 polarized NO contact: 16 (2) A / 250Va.c. • Anti-UV opaline housing
• Connection with cables up to 2.5 mm2 • Protection degree IP 54
• Wiring with shielded cable diameter 4-9 mm • Dimensions (Ø L x W x H) Ø 82 x 97 x 101 mm
1IC 7243
Photocell lighting control switch with replaceable control module for wall-mounting and/or pole installation
Product being particularly suitable to facilitate system maintenance personnel: the control part that can be removed
from the base of the contacts allows a quick intervention in the product without disconnecting the load
• Power supply 230V a.c. 50/60Hz • Intervention threshold adjustment trimmer, 2 - 200 Lux
• Outdoor installation • Threshold signalling LED
• Output 1 polarized NO contact: 16 (2) A / 250Va.c. • Anti-UV opaline housing
• Connection with cables up to 2.5 mm2 • Protection degree IP 65
• Wiring with shielded cable diameter 7-11 mm • Dimensions (L x W x H) 72 x 37.5 x 147 mm
• Pre-calibrated at the factory at 10 Lux ± 20%
1PR 7243M Spare module for photocell lighting control switch item 7243
• Power supply 230V a.c. 50/60Hz • Intervention threshold adjustment trimmer, 2 - 200 Lux
• Outdoor installation • Threshold signalling LED Anti-UV opaline housing
• Output 1 polarized NO contact: 16 (2) A / 250Va.c. • Dimensions (L x W x H) 72 x 37.5 x 80 mm
• Pre-calibrated at the factory at 10 Lux ± 20%
1IC 7245
Photocell lighting control switch model “FEBO” for wall-mounting and/or pole installation
The factory 10 LUX calibration prevents difficult interventions by the installer
• Power supply 230V a.c. 50 / 60Hz • Intervention threshold adjustment trimmer, 2 - 200 Lux
• Outdoor installation • Threshold signalling LED
• Output 1 polarized NO contact: 16 (2) A/250Va.c. • Anti-UV opaline housing
• Connection with cables up to 2.5 mm2 • Protection degree IP 65
• Wiring with shielded cable diameter 7-11 mm • Dimensions (L x W x H) 55 x 45 x 106 mm
• Pre-calibrated at the factory at 10 Lux ± 20%
1IC 7051
Photocell lighting control switch with adjustment 2-10.000Lux, 2 DIN
It allows progressively lighting street tunnels
• Power supply 230V a.c. 50 / 60Hz DIN assembly plus • Threshold calibration signalling LED
outdoor probe • Operation signalling LED Intervention threshold
• Output 1 changeover contact, potential-free: adjustment trimmer
16 (2) A / 250V a.c. • Dimensions DIN (L x W x H) 35 x 60 x 90 mm
• Connection with cables up to 2.5 mm2
• Adjustment range 2-100 / 2-1000 / EXTERNAL PROBE
2-10.000 Lux (3 scales) • Anti-UV opaline housing
• Activation delay 8 sec ± 10% • Protection degree IP 65
• Deactivation delay 38 sec ± 10% • Dimensions of the probe (L x W x H) 28 x 48 x 56 mm
1IC 7052
Photocell lighting control switch with adjustment 2-200 Lux, 2 DIN
Provided with hysteresis and activation / deactivation delays to prevent false switching
• Power supply 230V a.c. 50 / 60Hz DIN assembly plus • Operation signalling LED Intervention threshold
outdoor probe adjustment trimmer
• Output 1 changeover contact, potential-free: • Dimensions DIN (L x W x H) 35 x 60 x 90 mm
16 (2) A / 250V a.c.
• Connection with cables up to 2.5 mm2 EXTERNAL PROBE
• Adjustment range 2-200 Lux adjustable • Anti-UV opaline housing
• Activation delay 8 sec ± 10% • Protection degree IP 65
• Deactivation delay 38 sec ± 10% • Dimensions of the probe (L x W x H) 28 x 48 x 56 mm
• Threshold calibration signalling LED
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range EasyLogic
Complementary
Device application Sub billing
Power monitoring
Network frequency 50 Hz
60 Hz
Local signalling Red LED: output signal 1...9999000 pulse/ k_h (kWh, kVAh, kVARh)
Green LED: module operation and integrated communication
Number of inputs 0
Number of outputs 0
Communication port protocol Modbus RTU at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none - 2 wires, insulation
2500 V
Material Polycarbonate
Width 96 mm
Height 96 mm
Environment
Service life 7 year(s)
Pollution degree 2
Packing Units
Unit Type of Package 1 PCE
Offer Sustainability
Sustainable offer status Green Premium product
Bussmann series
NH Bases
Product description
Eaton’s Bussmann series NH Bases have been
designed with thermoplastic bodies DIN-Rail
and/or screw mounting (size 4 screw mounting
only).
This range comes with a accessories including
phase barriers: IP20 finger safe protection kits
and neutral links.
Microswitch also available for remote signaling
of fuse link operation.
Standard features
• Complies with IEC 60269-1 and 2 fuse
system A (NH Base), manufacturers type test
certificates of compliance available.
• 3-pole integral NH00 Base available with
reduced width
• Clip-in phase barriers, terminal shrouds and
fuse covers available
• Vibration tested to IEC 60068-2-6 for marine
use
Catalogue symbol
• 1-pole DIN-Rail and screw mounting: SD(size)-D
• 1-pole screw mounting only: SD(size)-S
• 3-pole DIN-Rail and screw mounting: TD(size)-D
• 3-pole Integral DIN-Rail and screw mounting: TD00-DxI (see
catalogue numbers for details)
Technical data
• Rated voltage: 690 V a.c.
• Rated current: 160 to 1600 A
• Rated for fuse links with breaking capacity of 120 kA
Standard/Approvals
• IEC 60269-1 and 2
• VDE 0636-1 and 2
Packaging
• 1-pole: 3
• 3-pole and SD4: 1
Technical data
SD00-D
TD00-D SD1-D SD2-D SD3-D
Fuse base catalogue numbers TD00-DI TD1-D TD2-D TD3-D SD4-S SD4-S1600
Base Glass filled PBT
Contacts Silver plated copper
Screw, nuts and washers Zinc clear plated steel
35°C 1 1 1 1 1 1
Derating temperature factors for 40°C 0.95 0.95 0.95 0.95 0.95 0.95
maximum current
50°C 0.85 0.85 0.85 0.85 0.85 0.85
Maximum power acceptance 12W 32W 45W 60W 110W 145W
Degree of protection with covers fitted IP20 IP20 IP20 IP20 - -
Terminal screw M8 M10 M10 M12 M16 M16
Maximum tightening torque terminal screw 10N•m 32N•m 32N•m 32N•m 56N•m 56N•m
DIN-Rail
Fixing
Screw
With microswitch 16A/250V Fuse operated signal
Operating temperature range -20 to 70°C
Storage temperature range -40 to 80°C
Bussmann series
500 Volts gG/gL NH Fuse links
Product description
Eaton’s Bussmann series 500 Volts NH square
bodied industrial fuse links are suitable for a
wide variety of applications.
Standard features
• Reliable dual indicator system
• Low temperature rise
• Globally compliant
• Compatible with Bussmann series PV NH
base range (see data sheet 10163)
Standards/Approvals:
• IEC 60269
• VDE 0636
• DIN 43620
• CE
Microswitches:
• 170H0236
• BVL50
Packaging:
• Sizes 000 to 3: 3 per carton
• Size 4: 1 per carton
Size - mm
Table 1. NH Sizes
Size a1 a2 a3 a4 b c1 c2 d e1 e2 e3 e4 f
(max) (max) (max) (max) (max)
HLA50-255/4+0
Lightning impulse current arresters type T1 ensure the Installed as close as possible the overhead line enters the building
equipotential bonding and eliminate the effects of lightning i.e. the electric power substation, electrometer or the main
current in single-phase and three-phase power supply systems. distribution boards.
Products contain multiple non-exhausting spark gaps, thanks to If the product contains two PE (or PEN) terminals, it must not be
which they are able to discharge the highest lightning impulse used as a PE (PEN) bridge.
current. LED indication specifies a version with LED fault signalisation.
Suitable for objects with considerable levels of protection LPL I S indication specifies a version with remote monitoring and LED
and LPL II, such as big industrial complexes and properties of fault signalisation.
particular importance – hospitals, banks, power plants.
Type HLA50-255/4+0
Test class according to EN 61643-11:2012 (IEC 61643-11:2011) T1
System TN-S
Number of poles 4
Rated operating AC voltage UN 230 V
Maximum continuous operating voltage AC UC 255 V
Impulse discharge current for class I test (10/350) Iimp 50 kA
Charge Q 25 As
Specific energy for class I test W/R 625 kJ/Ω
Total discharge current (10/350) L1+L2+L3+N->PE ITotal 200 kA
Nominal discharge current for class II test (8/20) In 50 kA
Voltage protection level at Iimp Up < 2 kV
Temporary overvoltage test (TOV) for tT = 5 s UT 337 V
Temporary overvoltage test (TOV) for tT = 120 min UT 440 V
Response time tA < 100 ns
Maximal back-up fuse 500 A gL/gG
Short-circuit current rating at maximum back-up fuse ISCCR 25 kArms
Follow current interrupt rating Ifi 25 kArms
Lightning protection zone LPZ 0-1, LPZ 1-2
Housing material Polyamid PA6, UL94 V-0
Degree of protection IP20
Operating temperature ϑ -40 ÷ 70 °C
Humidity range RH 5 ÷ 95 %
Minimum cross-section of connected Cu conductors accord. to HD 60364-5-53:2022 S 6 mm² (L, N)
(doesn't apply to „V“ connection) for T1 16 mm² (PE, PEN)
Clamp fastening range (solid conductor) 2.5 ÷ 25 mm2
Clamp fastening range (stranded conductor) 2.5 ÷ 16 mm2
Tightening moment 4 Nm
Installation On DIN rail 35 mm
HLA50-255/4+0 – page 1/2 HAKEL spol. s r.o. | Bratri Stefanu 980, 500 03 Hradec Kralove, Czech Republic
Datasheet generated on 2023-06-24 20:47:49 Phone: +420 494 942 314 | e-mail: info@hakel.com
PM210011-NUI900-ESE-00001_02 139| of
www.hakel.com
154
Lightning arresters T1
Type HLA50-255/4+0
Modular width 8 TE
Operating position Any
Product placement environment Internal
Signalling at the device None
Remote signalling No
Modular design No
Lifetime > 100 000 h
Application standards
Protection against lightning IEC 62305:2010
Selection and erection of electrical equipment – Switchgear and controlgear HD 60364-5-53:2022
Selection and application principles for SPDs connected to low-voltage power systems CLC/TS 61643-12:2009
The link in the QR code leads to the online presentation of the HLA50-255/4+0.
There, in addition to the always up-to-date data sheet, you will also find all diagrams
and drawings, declarations of conformity, or 2D or 3D models and other necessary materials.
For more information, visit www.hakel.com 8590681114810
HLA50-255/4+0 – page 2/2 HAKEL spol. s r.o. | Bratri Stefanu 980, 500 03 Hradec Kralove, Czech Republic
Datasheet generated on 2023-06-24 20:47:49 Phone: +420 494 942 314 | e-mail: info@hakel.com
PM210011-NUI900-ESE-00001_02 140| of
www.hakel.com
154
HSA-320/4+0 M S
Surge arresters type T2+T3 ensure the equipotential bonding and Installed at the boundaries of LPZ 1 – LPZ 3 into subsidiary
reduce switching, induced and residual overvoltage in LV power switchboards and control panels.
supply systems. If the product contains two PE (or PEN) terminals, it must not be
The products consist of varistors with big discharge ability. used as a PE (PEN) bridge.
Configurations 1+1 and 3+1 are additionally combined with a gas M indication specifies a type of construction with removable
discharge tube which ensures zero leakage current through the PE module.
conductor. S indication specifies a version with remote monitoring.
Type HSA-320/4+0 M S
Test class according to EN 61643-11:2012 (IEC 61643-11:2011) T2, T3
System TN-S
Number of poles 4
Rated operating AC voltage UN 230 V
Maximum continuous operating voltage AC UC 320 V
Maximum discharge current (8/20) Imax 50 kA
Nominal discharge current for class II test (8/20) In 20 kA
Open circuit voltage of the combination wave generator UOC 6 kV
Total discharge current (8/20) L1+L2+L3+N->PE ITotal 200 kA
Voltage protection level at In Up < 1.4 kV
Voltage protection level at UOC Up < 0.95 kV
Temporary overvoltage test (TOV) for tT = 5 s UT 337 V
Temporary overvoltage test (TOV) for tT = 120 min UT 440 V
Response time tA < 25 ns
Maximal back-up fuse 160 A gL/gG
Residual current IPE ≤ 400 µA
Short-circuit current rating at maximum back-up fuse ISCCR 60 kArms
Lightning protection zone LPZ 1-2, LPZ 2-3
Housing material Polyamid PA6, UL94 V-0
Degree of protection IP20
Operating temperature ϑ -40 ÷ 70 °C
Humidity range RH 5 ÷ 95 %
Minimum cross-section of connected Cu conductors accord. to HD 60364-5-53:2022 S 2.5 mm² (L, N)
(doesn't apply to „V“ connection) for T2 6 mm² (PE, PEN)
Clamp fastening range (solid conductor) 1.5 ÷ 25 mm2
Clamp fastening range (stranded conductor) 1.5 ÷ 16 mm2
Tightening moment 3 Nm
Installation On DIN rail 35 mm
Modular width 4 TE
HSA-320/4+0 M S – page 1/2 HAKEL spol. s r.o. | Bratri Stefanu 980, 500 03 Hradec Kralove, Czech Republic
Datasheet generated on 2023-06-24 20:50:05 Phone: +420 494 942 314 | e-mail: info@hakel.com
PM210011-NUI900-ESE-00001_02 141| of
www.hakel.com
154
Surge arresters T2+T3
Type HSA-320/4+0 M S
Operating position Any
Product placement environment Internal
Signalling at the device Optic
Importance of local signaling OK – clear target
FAULT – red target
Remote signalling Yes
Potential free signal contact (S) (recommended cross-section of remote monitoring AC: 250 V / 1.5 A, DC: 250 V / 0.1 A
max. 1 mm2)
Modular design Yes
Article number of spare module 27 192
Lifetime > 100 000 h
Application standards
Protection against lightning IEC 62305:2010
Selection and erection of electrical equipment – Switchgear and controlgear HD 60364-5-53:2022
Selection and application principles for SPDs connected to low-voltage power systems CLC/TS 61643-12:2009
The link in the QR code leads to the online presentation of the HSA-320/4+0 M S.
There, in addition to the always up-to-date data sheet, you will also find all diagrams
and drawings, declarations of conformity, or 2D or 3D models and other necessary materials.
For more information, visit www.hakel.com 8590681116548
HSA-320/4+0 M S – page 2/2 HAKEL spol. s r.o. | Bratri Stefanu 980, 500 03 Hradec Kralove, Czech Republic
Datasheet generated on 2023-06-24 20:50:05 Phone: +420 494 942 314 | e-mail: info@hakel.com
PM210011-NUI900-ESE-00001_02 142| of
www.hakel.com
154
INSPECTION CHECKLIST
Project Client :
Panel name Job No :
Pos. Description Result
1. Enclosure
1.1. Enclosure type (degree of protection)
1.2. Dimension / measurement
1.3. Doors and cover fit properly, no sound no resistance while opening
1.4. Lifting angles and base channel properly assembled / secured
1.5. Finish kind, color, appearance, paint condition
1.6. Enclosure conform to general characteristics
1.7. Incoming and outgoing cable (space)
1.8. Bolts and nuts
1.9 Enclosure Clean
2. Electrical conductors
2.1. Size with thickness and quantity per phase of bus bar
2.2. Size of wire (incoming, outgoing and controls)
2.3. Alignment and bus bar support spacing/Insulators
2.4. Control Transformer Rating
2.5. Torque marks
2.6. Control wiring properly wired
2.7. Connection of LV cable to transformer
2.8. Phase, earth circuit continuity
2.9. Point–to-point / continuity test
2.10 Electrical conduct clean
3. Components layout and service specification
3.1. Arrangement of components as per approved drawing
4. Conformity of components
4.1. Components rating as per drawing
4.2. Component installed must conform to drawing list
4.3. Nameplates and components label
5. Mechanical operation test
5.1. Closing and opening of circuit breaker
5.2.
All handles, interlocks, switches operate freely and are accessible
PM210011-NUI900-ESE-00001_02 145 of 154
5.3
Components clean
6. Electrical test
6.1. MEGGER test
6.2. Dielectric test
7. Functional test
7.1. Component device electrical operation test
7.2. Confirmation of electrical interlock
7.3. Electrical operation of circuit breaker on / off
7.4. Verification of panel heater and lighting (if fitted)
7.5. ATS operation test (automatic / manual)
8. Protection test
8.1. Relay operate satisfactory
8.2. All protection relay functional confirmation
9. Metering
9.1. Test for correct polarity of connection (correct direction of movement)
REMARKS:
Procedures: Check-in conformity of drawing with IEC 61439-1 Edition 1.0 2009-01
2. Layout
3. Service specifications
3.1.Voltage: ………..…. V; phase: …….….; wires: ………..….; frequency: ………. Hz; temp: …..…. °C
4. Conformity of components
4.1. Enclosures
4.1.1. Dimensions (HxWxD): ………..….. x ………..….. x ………..….. mm
4.1.2. No. of sections: ………..….…….. No. of modules: ………..….……..
4.1.3. Degree of protection: IP ………..…
4.2. Control and protection units
4.2.1. Main breaker: rating ………. A, ………. P; 4.2.3. Main breaker: rating: ………. A, ………. P
- type: - type:
4.2.2. Main breaker: rating: ………. A, ………. P; 4.2.4. Main breaker: rating: ………. A, ………. P
- type: - type:
4.3. Metering
in / out in / out in / out in / out in / out in / out
CT rating A A A A A A
Ammeter rating A A A A A A
Ammeter selector switch : pos. pos. pos. pos. pos. pos.
Volt. transformer rating v v v v v v
Voltmeter rating v v v v v v
Voltmeter selector switch pos. pos. pos. pos. pos. pos.
4.11. Interlocking
4.11.1. In-comers / feeders / bus couplers
4.11.2. Type: mech. electr. key (See Panel Drawing for Details)
7. Dielectric test
7.1. Insulation resistance test (Megger test) 1 kVDC / 1 min Insulation [MΩ]
(Satisfactory if the insulation resistance L1 - L2
between circuits and exposed conductive L2 - L3
parts is at least 1000 Ohms/V per circuit L3 - L1
referred to nominal voltage to earth of L- N
these circuits) L- E
N -E
7.2. Dielectric test (for main circuits) 2.5 kVAC / 1 Sec Passed / Failed
(Passed if no puncture or flash-over) L1 - L2
L2 - L3
L3 - L1
L- N
L- E
N -E
7.3.1.Continuity Test
7.3.2.ƵdžŝůŝĂƌLJΘŽŶƚƌŽůŝƌĐƵŝƚ
REMARKS
1. Layout
2. Service specifications
2.1.Voltage: ………..…. V; phase: …….….; wires: ………..….; frequency: ………. Hz; temp: …..…. °C
3. Conformity of components
3.1. Enclosures
3.1.1. Dimensions (HxWxD): ………..…..x………..…..x………..….. mm
3.1.2. No. of sections: ………..….…….. No. of modules: ………..….……..
3.1.3. Degree of protection: IP ………..…
3.1.2. Mounting Type: Flush
Floor mounted:
Mounted SurfaceMounted
Surface mounted:
3.1.5. Number of ways:
3.1.6. Entry: Bottom: Top:
3.1.7. Optional accessories: Lock: Gasket: Earth Bar: Tinplated Busbar
4. INSPECTION OF MECHANICAL PART
4.1
4.1.1 Step 1 Result 4.1.2 Step 2 Result
4.1.1.1 Tightening of the bolts 4.1.2.1 Alignment of branch breakers
4.1.1.2 Fixation of the neutral Busbar 4.1.2.2 Door hinges
4.1.1.3 Provision of phase insulator 4.1.2.3 Door locking fixtures
4.1.1.4 Phase marking 4.1.2.4 Fixation of the earth Busbar
4.1.1.5 Branch breakers fixation 4.1.2.5 Cleanness of the parts
4.1.1.6 Labels : Panel name: Earth: Neutral:
Note: 1. Bolt tightening torques for bus-bar fixation and electrical assembly – 13.5 Nm; 2. Mark upon the joints by a red paint when checked
4.2 Protection
4.2.1. Main Breaker: Type: Rating:
4.2.2. Branch Breakers (see drawing):
4.3. Main Busbars
4.4.1.Size: ………….. x………….. mm (L1, L2, L3) qty: …………..
………….. x………….. mm (N) qty: …………..
………….. x………….. mm (E) qty: …………..
4.4.2. Material: tin-plated copper insulated copper bare copper
5 Metering
in / out in / out in / out in / out in / out in / out
CT rating A A A A A A
Ammeter rating A A A A A A
Ammeter selector switch : pos. pos. pos. pos. pos. pos.
Voltmeter rating v v v v v v
Voltmeter selector switch pos. pos. pos. pos. pos. pos.
8 Functional tests
8.1 Megger test – Application of 1kv / 1 Min
Phase L1 – L2 L2 – L3 L3 – L1 L1 - N L2 - N L3 - N L1- E L2 - E L3 - E N-E
Result
9.2 5KV INSULATION TESTER FLUKE-1550 C 9.4 POWER SOCKET PANEL 380/220V AC
Procedures: Check conformity with the drawings and IEC 61439-1 Edition 1.0 2009-01
2 FINAL INSPECTION
2.1 Aspect and presentation OK
2.2 Conformity of components
2.2.1 Mounting type: FlushMounted
Wall mounted Control Transformer :
2.2.2 Number of ways: Enclosure Size : IP-
2.2.3 Entry: bottom
Bottom Enclosure Color :
2.2.4 Main breaker: type Rating :
2.2.5 Branch breaker(s) Supplied loose
Fitted Drawing No. :
2.2.6 Optional Ronis lock Gasket Tin-plated
Tin - Plated Bus Bar
accessories -
2.3 Functional tests
2.3.1 Dielectric test – Application of 1kv / 1 Min
Phase L1 – L2 L2 – L3 L3 – L1 L1 - N L2 - N L3 - N L1- E L2 - E L3 - E N-E
Result
3 MEASURING DEVICES
Name Serial No. Name Serial No.
3.1 MULTIMETER FLUKE-179 3.3 TORQUE WRENCH
3.2 5KV INSULATION TESTER FLUKE-1550C 3.4 POWER SOCKET PANEL 380/220V AC