The document provides specifications for a heavy duty single full height industrial 4 arm turnstile. It can process a flow rate of 50-150 persons per 10 minutes. It has a sturdy welded construction made of low carbon steel and weighs approximately 250kg. Standard finishes include powder coated charcoal grey or optional RAL paint codes and it has an IP65 rating.
The document provides specifications for a heavy duty single full height industrial 4 arm turnstile. It can process a flow rate of 50-150 persons per 10 minutes. It has a sturdy welded construction made of low carbon steel and weighs approximately 250kg. Standard finishes include powder coated charcoal grey or optional RAL paint codes and it has an IP65 rating.
The document provides specifications for a heavy duty single full height industrial 4 arm turnstile. It can process a flow rate of 50-150 persons per 10 minutes. It has a sturdy welded construction made of low carbon steel and weighs approximately 250kg. Standard finishes include powder coated charcoal grey or optional RAL paint codes and it has an IP65 rating.
The document provides specifications for a heavy duty single full height industrial 4 arm turnstile. It can process a flow rate of 50-150 persons per 10 minutes. It has a sturdy welded construction made of low carbon steel and weighs approximately 250kg. Standard finishes include powder coated charcoal grey or optional RAL paint codes and it has an IP65 rating.
Technical Specifications: Model No.: 355B - HTG (S) Power Supply: 220VAC.50Hz. Arms: Four wings, angle between each wing is 90 degrees. Each wing is equipped with 11 arms with a section thickness of 1.6mm and 50mmØ. Option: Three wings, angle between each wing is 120 degrees. Flow Rate: Number of Persons / 10 minutes Min.50 - Max.150 (Please note that the above given figures are approximate for one person per walkway or lane. Utilization of different access control methods will change the figures between minimum and maximum rates) Weight: Approximately 250kg. Construction: Main Frame: Sturdy, fully welded construction manufactured from low carbon steel heavy channels, flats and square hollow sections. The hollow sections provide ideal conduiting power and control cables. Rotating Gate: Square hollow centre column with end shafts located in sealed bearing blocks with welded on 50 mm diameter tube gate arms. Maximum Working Temperature -20°C/+65°C (no condensation) Control: Can be controlled through dry contact. Can be operated harmoniously with all kinds of access control units and token sys- tem when integrated for example Biometrics, Card, Push Button, Remote, etc. Dimensions: As per drawing no. TS-A4-355B rev.7. Finish: * Standard Finish: Powder coated to Colour Charcoal Grey. Optional RAL code of choice. * Painted Finish in accordance with specific site requirements. * Hot Dipped Galvanized Since 1975 – Flow Systems The Original * Stainless Steel 304/316 Manufacturer of Turnstiles in South Africa
IP Rating: IP65
Note: all specifications and dimensions are subject to change without notice