Professional Documents
Culture Documents
Dns Jumper v2
Dns Jumper v2
Dns Jumper v2
2
Author | March 17, 2020 | 477 Comments
DNS, or domain name system, is the internet protocol that turns human readable website names
(such as sordum.org) into machine readable numeric addresses. In some cases, you can
improve browsing speed and/or improve your security by replacing the DNS provided by your
internet service provider. DNS Jumper is a tool which makes this easy for you.
Why you should use DNS Jumper:
1. It can aid in accessing blocked websites
2. It can improve security by changing to more secure DNS servers
3. It can help keep your children safe by blocking inappropriate websites (e.g. adult material) by
selecting a Family Safe DNS server.
4. It can speed browsing by moving to a faster DNS server
5. Changing DNS servers manually can be done, but DNS Jumper greatly simplifies the process
DNS Jumper 2.1 has some new and important features, such as Turbo Resolve which can apply
the fastest DNS at startup. DNS Jumper is freeware, and portable (no installation needed).
How to Restore Your DNS settings or use your ISP’s default DNS Again:
NOTE: Security softwares like Avast or Malwarebytes can cause Very high resolve times,if you
use one of them please add DnsJumper to Exclusion list. ZoneAlarm security software may block
DNS Jumper’s Ping feature, Please configure ZoneAlarm to allow ping messages , explanation
.
Our DNS list is just a samle , Please don’t use unsecure DNS servers , we are not responsible
for any illegality or damage. Until now DNS jumper has been downloaded more
than 5.000.000 (five million) times (our server + Other web resources) THANKS FOR YOUR
TRUST
Supported operating systems: Windows 10 , Windows 8.1 , Windows 8 , Windows 7 ,
Windows Vista , Windows Xp – (x86 & x64)
– Quickly and easily change your IPv4 and IPv6 DNS settings
– See your selected network card’s current DNS IP address.
– Easily backup and restore your current DNS settings.
– Check your DNS server response time.
– Automated checking of all listed DNS response times, finding the fastest available. You can
then quickly apply it to your DNS settings.
– Add your own custom DNS server.
– CMD (command line) support
– Clear/Flush the DNS cache
– Add your own language (Use Options > Languages > Translate feature)
There are two ways to do this , Option 1: Use the the DNS Jumper main interface:
a. Under ‘choose a DNS Server’, select a server from the drop-down menu.
b. Click the ‘Apply DNS’ button
Option 2: Right-click the system tray icon and select one of the preferred servers
How To Add a Custom DNS Server
Easily add a custom DNS server by first ticking the ‘Custom DNS server’ box, and then type (or
paste) in the IP address you wish to add. Do the same for the alternate IP address. Then click
the ‘Apply DNS’ button.
The first time you run DNS Jumper, it automatically backs up your current network card’s DNS
settings. To back up the settings manually, click “Quick Configuration” (the ‘star’ button) and then
select ‘Backup DNS’.
There are two ways to restore your settings back to your ISP’s defaults.
1. click the “Quick Configuration” button (the star) and click “Default DNS”
2. Under “Choose a DNS Server”, open the drop down menu and select “Restore” or “Default”,
and then click the “Apply DNS” button
DNS Jumper features 3 pre-set lists of servers to choose from. Aside from the Default list, you
might also wish to see a list of Family Safe servers. These can help protect your children from
inappropriate websites (including pornographic). You can improve security by selecting the
‘Secure DNS List’.
1. Click the “DNS Group” icon (looks like two small folders) and select your desired server list
2. Click the ‘Choose a DNS Server’ drop down menu and select a DNS server from the list
3. Click the ‘Apply DNS’ button on the left
If you have a long list of DNS servers and want to find the resolve times, you can use the Turbo
Resolve feature. It will drastically reduce the total test time.
Add or delete a DNS server: Click the “DNS Options” button (gear icon) (1)
The settings page will open to the DNS List tab. You can now edit the default DNS server list, or
choose another from the drop-down list (1). From here you can add or delete a server from the
list, change its name, or its IP address. When making changes you will need to click the “Save
Changes” button to apply them.
Add or delete a DNS server Group: There are two methods for adding or deleting a group.
a) via the user interface : Click the Add (blue plus sign) button (2) and type in a name for your
group. This will open a new blank DNS server list, to which you can manually add your own
servers. You can delete a group by using the Delete (red minus sign) button (3)
b) via the DNSJumper.ini: To avoid problems, close DNS Jumper before editing the .ini. Right-
click the dnsjumper.ini file and select “open with Notepad”.
1. Ipv4 or IPv6
2. Group Name
3. Location
4. DNS Name
5. Preffered DNS
6. Alternate DNS
7. True=included in fastest DNS test, false=not included in the test
To delete a DNS group, select it and delete it. The same goes for IPv6.
You can easily reorder your DNS Server list with drag and drop. As shown in the screenshot
above, to move “US-OpenDNS-2” down the list, left click it and drag it to its new position and
release.
In the same General Settings area, tick the box next to “Apply following parameters at system
startup”, and in the text field below that type in “/T default” (without quotes). You can also apply
other settings at startup using the correct parameters. Click the light bulb icon to the far right for
more information regarding parameters.
Changelog:
—————————————————————
Changelog:
1. [ Fixed ] – Changing Custom Text size (DPI) messes up the DnsJumper’s texts
2. [ Fixed ] – Dns jumper.exe /? parameter window is cutting the text off
3. [ Fixed ] – Windows 10 1607 make DnsJumper’s icons blurry
4. [ Fixed ] – Minimized tray icon help section causes DnsJumper to freeze
5. [ Fixed ] – Dns Jumper can’t show some Network Adapter name Properly
6. [ Fixed ] – Dns Jumper startup reg BUG (Instead of 32 bit write 64 bit registry hive)
7 [ Fixed ] – UPX causes Minor latency (No UPX used)
8. [ Fixed ] – Minor Bugs of codes
9. [ Added ] – New parameters (Ipv4/Ipv6 support…)
—————————————————————
Changelog:
1. [ Fixed ] – Dns Jumper cannot ping some DNS servers (instead of ping Resolve method used)
2. [ Fixed ] – Dns jumper’s Buttons are very small and some minor GUI changes
3. [ Fixed ] – Sometimes Update function doesn’t work (improved)
4. [ Added ] – Tray menu
5. [ Added ] – Turbo resolve feture , it will reduce the total fastest Dns test time drastically
6. [ Added ] – Start DNS jumper on system startup , Apply parameters at system startup …
features
7. [ Added ] – Parameter support to Run fastest Dns test at startup and apply it Automatically
8. [ Added ] – Dns list Export – Import features
—————————————————————
Changelog:
Changelog:
1. [ Added ] – IP v6 support
2. [ Fixed ] – On some x64 Windows systems DNSJumper won’t run correctly
3. [ Fixed ] – After Update comes Dublicate entries
4. [ Fixed ] – You can ping only 99 DNS servers
5. [ Fixed ] – Antivirus “False Positive” Problems
6. [ Added ] – You can see your current Dns feature
7. [ Added ] – Improved Ping algorithm
8. [ Added ] – You can ping only selected Dns servers feature
9. [ Added ] – You can select or deselect all Dns servers easily (with right click) feature
10.[ Added ] – You can stop dns servers ping test feature
11.[ Added ] – Open network connections easily feature
12.[ Added ] – Find selected dns’s country feature
13.[ Added ] – You can create your own Dns server group or use one of the default Groups
feature
14.[ Added ] – Voice allert feature
15.[ Added ] – Clear the DNS cache Automatically feature
16.[ Added ] – Secure DNS Group
17.[ Added ] – Show the fastest DNS test results as Mixed Feture
(for example: first fastest dns ip “Google” and second one is “Open DNS”) if mixed Option not
selected DNSJumper shows the the same organization’s DNS IPs (such as Google)
18.[ Added ] – Quick Configuration menu
19.[ Added ] – New Logo and icons
—————————————————————
Changelog:
1. [ Fixed ] – Antivirus “False Positive” Problems (No UPX and No more False Positive)
2. [ Fixed ] – Doesn’t work on some Vista / windows 7
3. [ Fixed ] – Doesn’t work on some x64 systems
4. [ Fixed ] – Doesn’t work on PE (Preinstalled) Environment
5. [ Fixed ] – Doesn’t recognise some Wlan Cards
6. [ Added ] – Update function added (Press i – info button and then press Update check button)
7. [ Added ] – Backup and restore added (if Dns jumper v1.0.4 First time run, Automatically back
up your dns settings)
,if you want to restore your settings select Restore (under choose a free DNS Service) and Press
apply button
8. [ Added ] – Languages preinstalled
9. [ Added ] – fastest DNS – a bit improved
10.[ Added ] – More Dns (17 to 32) 15 new
11. No problem with USB modems (till now)
12.[ Added ] – cmd suport
13. if dns jumper doesn’t recognise your Network card (very rare) can still
change dns server settings (choose all Network Cards and press Apply dns button)
14. German Language added
15. a few minor visual changes
—————————————————————
Dns Jumper v1.0.3 (Monday, 25. January 2010)
Changelog:
—————————————————————
—————————————————————
it has Only 10 Dns ,I’ve googled and noticed that this name is dangerous!
so I’ve decided to change the name , and made it Dns jumper
////////Produced by Velociraptior////////
—————————————————————