Classwork 02 Name: Andrew Rey Lardizabal Date: Sept 4, 2022 Signature:
Give at least 5 examples for alternative intersections (local or
international). If possible, provide a brief explanation of the intersection. Provide a picture and indicate the location of the intersection.
Diverging diamond intersection - also called a double crossover
diamond interchange (DCD). Is a subset of diamond interchange in which the opposing directions of travel on the non-freeway road cross each other on either side of the interchange so that traffic crossing the freeway on the overpass or underpass is operating on the opposite driving side from that which is customary for the jurisdiction. The crossovers may employ one-side overpasses or be at-grade and controlled by traffic light.
Macleod Trail and 162 Avenue SE. Located in southeast Calgary
Name: Andrew Rey Lardizabal Date: Sept 4, 2022 Signature: Partial Cloverleaf Intersection - parclo is a modification of a cloverleaf interchange. The design has been well received and has since become one of the most popular freeway-to-arterial interchange designs in North America. It has also been used occasionally in some European countries, such as Germany, Hungary, Italy, the Netherlands, and the United Kingdom.
Mayapa-Canlubang Cadre Rd Calamba, 4027 Laguna
Name: Andrew Rey Lardizabal Date: Sept 4, 2022 Signature: Single-Point Urban Interchange - is a type of interchange where the arterial and ramp entrances/exits are controlled by a single traffic signal. This type of interchange can be more efficient than a standard diamond interchange and takes up less space. A variation of the SPUI that has been used extensively in other countries is to replace the signal with a single roundabout.
S Harem Ave Oak Park IL 60304, USA
Directional Interchange - colloquially known as a stack interchange,
is a type of grade separated junction between two controlled-access highway that allows for free-flowing movement to and from all directions of traffic. These interchanges eliminate the problems of weaving, have the Name: Andrew Rey Lardizabal Date: Sept 4, 2022 Signature: highest vehicle capacity, and vehicles travel shorter distances when compared to different types of interchanges. The first directional interchange built in the world was the Four Level Interchange which opened to Los Angeles traffic in 1949.
Four Level Interchange – Los Angeles
Name: Andrew Rey Lardizabal Date: Sept 4, 2022 Signature: Cloverleaf Interchange - is a two-level interchange in which all turns are handled by slip road. To go left (in right-hand traffic; reverse directions in left-driving regions), vehicles first continue as one road passes over or under the other, then exit right onto a one-way three-fourths loop ramp (270°) and merge onto the intersecting road. The objective of a cloverleaf is to allow two highways to cross without the need for any traffic to be stopped by traffic lights. The limiting factor in the capacity of a cloverleaf interchange is traffic weaving.