Professional Documents
Culture Documents
Hyperdesmo®-Pb-Mono - en
Hyperdesmo®-Pb-Mono - en
Hyperdesmo®-Pb-Mono - en
com
Page 1/3
HYPERDESMO®-PB-MONO
DESCRIPTION bubbling.
HYPERDESMO®-PB-Mono is a quick curing, one • Excellent adhesion on almost any type of
component, thixotropic, bitumen-extended surface, with or without the use of special
polyurethane fluid. It produces a hydrophobic, primers.
elastic membrane with very strong adhesion to • Excellent thermal resistance, the product never
most types of substrates, as well as bituminous turns soft. Max service temperature 80 oC, max
and excellent mechanical and chemical resistance shock temperature 150 oC.
properties. It is ideal for application on vertical • Resistance in the cold: The film remains elastic
surfaces: No running, no bubbling. even down to -40 oC.
• Outstanding mechanical properties, high
It is based on pure elastomeric hydrophobic elongation, tensile and tear strength, high
polyurethane resin and is extended with abrasion resistance.
chemically polymerised virgin bitumen. • Excellent chemical resistance.
• Effective humidity barrier.
Apply with brush or spatula. Total consumption: • Effective radon gas barrier.
2.0 kg/m2 in one or two coats.
APPLICATION PREREQUISITES
RECOMMENDED FOR In general, HYPERDESMO®-PB-Mono has
Waterproofing and protection of: excellent adhesion to most types of substrates, as
• Gypsum and cement boards, well as bituminous, without the use of primers.
• asphalt membranes (for repair also), Nevertheless, testing before use is strongly
• cementitious substrates, advised. Please contact our technical department
• roofs, for further information.
• concrete/steel reinforced concrete or otherwise,
• light roofing made of metal or fibrous cement, Concrete substrate conditions (standard):
• basements, • Hardness: R28 = 15MPa.
• foundations, • Humidity: W < 10%.
• closed spaces with high humidity. • Temperature: 5-35 oC.
• Relative humidity: < 85%.
LIMITATIONS
Primer selection for special conditions and
Not recommended for unsound substrates or UV-
substrates:
exposed applications.
Although the material has excellent adhesion on
most common construction substrates, suitable
FEATURES & BENEFITS
primers are:
• Economic
AQUADUR, AQUASMART®-DUR: For strong
• Thixotropic: Easily applied on vertical surfaces
concrete or in cases of damp wet concrete.
and complex shapes without running or
MICROSEALER-50: In cases of porous concrete.
Page 2/3
HYPERDESMO®-PB-MONO
TECHNICAL SPECIFICATIONS
In liquid form (before application):
Page 3/3
HYPERDESMO®-PB-MONO
Tensile strength at break @ Kg/cm2 50
ASTM D412 / EN-ISO-527-3
23 oC (N/mm2) (5)
Without
primer: With
kg/cm2 >0.5 N/mm2 primer:
Adhesion to concrete ASTM D4541
(N/mm2) (EOTA >2
minimum N/mm2
requirement)
Thermal resistance (200
- EOTA TR011 passed
days @ 80 oC)
QUV Accelerated
Weathering Test (4hr UV, @ passed
- ASTM G53
60 oC (UVB-Lamps) & 4hr (1000 hours)
COND @ 50 oC)
Chemical resistance
(Sodium Hypochlorite - - unaffected
NaOCI 5% 10 days)
Hydrolysis resistance
(Potassium Hydroxide 8% - - unaffected
10 days @ 50 °C)
NONE OF OUR PUBLISHED INSTRUCTIONS AND SPECIFICATIONS, IN WRITING OR OTHERWISE, ARE BINDING EITHER IN GENERAL OR
WITH RESPECT TO ANY THIRD PARTY RIGHTS, OR DO THEY RELIEVE INTERESTED PARTIES OF THEIR DUTY TO SUBJECT THE PRODUCT TO
AN ADEQUATE EXAMINATION OF ITS SUITABILITY. IN NO EVENT WILL ALCHIMICA S.A. BE RESPONSIBLE FOR DAMAGES OF ANY NATURE,
WHATSOEVER, RESULTING FROM THE USE OF OR RELIANCE UPON INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS.
ALCHIMICA S.A. RESERVES THE RIGHT TO CHANGE AT ANY TIME THE PROPERTIES OF ITS PRODUCTS. PLEASE REFER TO THE CURRENT
VERSION OF THE TECHNICAL DATA SHEET, AVAILABLE FROM OUR WEB SITE WWW.ALCHIMICA.COM