Professional Documents
Culture Documents
Isa Lab Da-2
Isa Lab Da-2
Isa Lab Da-2
PC-0 configuration
Server-0 configuration
Router-1 configuration
Router-1 ISP
PINGING THE SERVER
2. Configure the dynamic NAT for the following topology.
Description: The purpose of this lab is to configure NAT on the source
router (NAT inside source) and test for connectivity by pinging a remote
router.
Instructions:
1. Assign IP addresses on all the devices as per the IP assignments table given
above
2. Create Access list on R1 as given in table above
3. Create IP NAT Pool on R1 as per the details given in table
4. Apply Access list to the NAT Pool table
5. Define IP NAT Inside and IP NAT Outside interfaces on R1
6. Test for connectivity from PC1 to R2
Dynamic NAT
PC-0 configuration
Router-0 configuration
Router-0 ISP
Router-1 ISP