Professional Documents
Culture Documents
Service Factors AC Motors
Service Factors AC Motors
Service Factors AC Motors
Table 12-4
SERVICE FACTORS
Service Factor
Synchronous Speed, Rpm
Hp 3600 1800 1200 900 720 600 514
1/20 1.4 1.4 1.4 1.4 ... ... ...
1/12 1.4 1.4 1.4 1.4 ... ... ...
1/8 1.4 1.4 1.4 1.4 ... ... ... Small
1/6 1.35 1.35 1.35 1.35 ... ... ... Motors
1/4 1.35 1.35 1.35 1.35 ... ... ...
1/3 1.35 1.35 1.35 1.35 ... ... ...
1/2 1.25 1.25 1.25 1.15* ... ... ... Medium
3/4 1.25 1.25 1.15* 1.15* ... ... ... Motors
1 1.25 1.15* 1.15* 1.15* ... ... ...
1-1/2-125 1.15* 1.15* 1.15* 1.15* 1.15* 1.15* 1.15*
150 1.15* 1.15* 1.15* 1.15* 1.15* 1.15* ...
200 1.15* 1.15* 1.15* 1.15* 1.15* ... ...
250 1.0 1.15* 1.15* 1.15* ... ... ...
300 1.0 1.15* 1.15* ... ... ... ...
350 1.0 1.15* 1.15* ... ... ... ...
400 1.0 1.15* ... ... .. ... ...
450 1.0 1.15* ... ... ... ... ...
500 1.0 1.15* ... ... ... ... ...
*In the case of polyphase squirrel-cage motors, these service factors apply only to Design A, B, and C motors. ▲
In those applications requiring an overload capacity, the use of a higher horsepower rating, as given in
10.32.4, is recommended to avoid exceeding the temperature rises for the class of insulation system
used and to provide adequate torque capacity.
Copyright National Electrical Manufacturers Association Document provided by IHS Licensee=Fluor Corp no FPPPV per administrator /use
Provided by IHS under license with NEMA new u/2110503106, 09/20/2004 09:18:07 MDT Questions or comments about this
message: please call the Document Policy Group at 303-397-2295.