Technical Specification For 1set 830kg 1nos Inlet Steam Boiler - Yuanda Boiler

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Henan Yuanda Boiler Co., Ltd.

Factory Address: 4th Industrial Road Western Industrial District, Xihua, Henan, China (Mainland)
Quality • Sincerity • Creditable Tel: +8613663834653; Fax: +86-037160137715; Skype: blake yuanda;

High-temperature flue gas waste heat recovery steam boiler


Boiler Characteristics:
1. Adopting the latest technology of Swiss boiler, outstanding appearance, fully
enclosed structure with door-opening type smoke box, easy for maintenance .
2. Large corrugated furnace design, make the combustion more sufficient and
ensure higher efficiency and lower failure rate.
3. Adopt advanced corrugated furnace and spirally corrugated tube , greatly
increase the heat surface area, and strengthen heat transfer and eliminating
welding stress.
4. Three-pass with wet back structure, ensure low maintenance cost.
5. Low exhausted smoke temperature(60-90 ℃) ensure 10% higher efficiency than
other boilers
6. Automatic operation of overtemperature, overpressure, water shortage,
leakage detection and flameout and so on

Specification of Q5.75/458-0.8-0.8 steam boiler

No Item Unit Data

1 Model / Q5.75/458-0.8-0.8

2 Capacity kg/hr 830

3 Rate pressure bar 7

4 Feed water temperature ℃ 20

5 Outlet steam temperature ℃ 150

6 Hydraulic test pressure bar 10

7 Steam temperature ℃ 170

8 Flue gas temperature of generator ℃ 458

9 Boiler design thermal efficiency % >50

10 Generator flue gas flow Nm³/h 5750

11 Smoke discharge concentration mg/m3 <200

12 Smoke blackness Greenman <1

13 Boiler main part size m 3500×1700×1910

14 Boiler main part weight T 4

You might also like