Professional Documents
Culture Documents
Groovex Main Catalog INCH With Tosefet (100822) WEB
Groovex Main Catalog INCH With Tosefet (100822) WEB
NO E
2022
S:
PRODUC
TS
and
EXPANSI
ONS
CO M PA N Y PR O D U C T S:
Innovative Grooving & Turning Solutions , the newest product line by VARGUS, provides
innovative solutions for grooving, boring and turning, in a wide range of applications.
EXTERNAL GROOVE TURNING:
VG-Cut – Complete Range of Turning Solutions for Grooving, Parting Off, Turning
& Profiling, Face Grooving, and Threading.
– Precise tools for external machining on Swiss type machines for a broad
range of applications.
GrooVical – Precise Grooving & Turning for shallow grooves, with accurate
grounded notch.
Laydown Grooving – Standard laydown grooving inserts for general use in internal
and external grooving applications.
GROOVE MILLING:
GM Solid – Solid carbide groove milling tools for miniature and small bores.
GM Slot – Indexable groove milling tools for Grooving and Chamfering applications.
Advanced Threading Solutions is the company’s prominent product line for Thread
Turning, Thread Milling, Gear Milling Solutions, and specialized solutions for the
Oil & Gas and Medical Industries..
This updated and extended version of the MAIN GROOVEX CATALOG now includes the newest GROOVEX
products and expansions, followed by the GROOVEX MAIN CATALOG, Edition 02.
Index
2022 PRODUCTS AND EXPANSIONS NEW
MAIN CATALOG
Table of Contents ............................................................................................................................................ 2 - 4
External Groove Turning ....................................................................................................................... 5 - 100
Internal Groove Turning ................................................................................................................... 101 - 198
Groove Milling ........................................................................................................................................ 199 - 216
N-2
I n n o v a t i v e G r o o v i n g & Tu r n i n g S o l u t i o n s
Dedicated Broaching Tools for Hexagon and Torx® Sockets ............................................................ N-5
micrOscope
New Microscope Chip Breaker for Internal Grooving Applications ............................................... N-11
N-4
NEW
micrObroach
Dedicated Broaching Tools
for Hexagon and Torx®
Sockets
N-5
Inserts
Internal
DMIN RE
WF
DCONMS
OHN
OHX
OAL
DMIN DMIN
N-6
Shank Type BE*
DCONWS
LPR
OAL
BD DCONMS DF
Spare Parts
LPR
OAL
BD DCONMS DF
Spare Parts
N-7
ST-CUT Precise Tools for
Small Parts Machining
PARTING
PARTING OFF FRONT
OFF FRONT
TURNING
TURNING BACK
BACK
TURNING
TURNING TURN-GR
TURN-
Features and Benefits: Front Turning Back Turning
• Outstanding chip control
• Unique insert replacement system
• Quick and easy change of insert inside the
machine from both sides of the tool
• High repeatability of the cutting edge on all axes
• Excellent rigidity for stable machining
• Insert edge treatment for increased tool life
N-8
ARTING OFF FRONT TURNING BACK TURNING TURN-GROOVE SQUARE GROOVE THREAD ROUND GROOVE
Front Turning
LH INSERT RH INSERT
LH Insert
RH Insert
2° 2°
t1 max R (RE) B (CW) B (CW) R (RE) t1 max
(CDX) W(CF) W(CF) (CDX)
N-9
T TURNING BACK TURNING TURN-GROOVE SQUARE GROOVE THREAD ROUND GROOVE
Back Turning
LH INSERT
LHLHInsert
INSERT RHINSERT
RH Insert
RH INSERT
N-10
NEW microscope
New Microscope Chip
Breaker for Internal
Grooving Applications
N-11
New Microscope Chip Breaker
for Internal Grooving Applications
Internal
D min
L ref
b F
d
t max
W
d
L1
a
F
W
t max
R
L1
L2 ref
N-12
New Microscope Chip Breaker
for Internal Grooving Applications
Internal
D min
L ref
b F
d
t max
W
d
L1
a
F
W
t max
R
L1
L2 ref
N-13
EXTERNAL GROOVE TURNING
HPC
CT
I
PRECIS
IVITY
ssure
High Prelant
Co o
R
EXTERNAL GROOVE TURNING T
Y
OF
P
I TA B I L I
Semi Finishing
VG-Cut
Complete Range of Groove Turning Solutions Precise Tools for Small Parts Machining
Introduction................................................................................................... 8 Introduction................................................................................................... 50
Technical Data.............................................................................................. 12 Technical Data.............................................................................................. 51
Inserts Inserts
Ordering Code System.......................................................................... 23 Ordering Code System.......................................................................... 55
Double Sided Inserts .059” - .236” (1.5 - 6.0mm)................ 24 Parting Off. . ...................................................................................................... 56
Single Sided Inserts .079” - .157” (2.0 - 4.0mm) ................ 26 Groove & Turn............................................................................................... 58
Turning & Profiling .079” - .236” (2.0 - 6.0mm).................... 27 Square Grooving.. ....................................................................................... 59
Threading .118" (3.0mm).. .................................................................... 28 Round Grooving......................................................................................... 60
Toolholders Threading......................................................................................................... 61
Ordering Code System.......................................................................... 30 Toolholders
External Monoblock Tools with HPC.......................................... 31 Ordering Code System.......................................................................... 63
External Monoblock Tools. . ................................................................. 32 Square Shank Tools. . ................................................................................. 64
Reinforced Monoblock Tools with HPC................................... 34 Stepped Square Shank Tools............................................................ 65
Reinforced Monoblock Tools .. ......................................................... 35 Square Shank 90° Tools......................................................................... 66
Blades with HPC.......................................................................................... 36
Blades.................................................................................................................. 36 Finishing
Reinforced Blades (Screw Clamping) with HPC................ 37
Reinforced Blades (Screw Clamping). . ....................................... 38
GrooVical
Reinforced Blades...................................................................................... 39
Precise Grooving & Turning Applications
Blade Holders................................................................................................ 39
Radial Modules............................................................................................ 40 Introduction................................................................................................... 68
Modular Bodies.. .......................................................................................... 41 Technical Data.............................................................................................. 69
Radial Modules with HPC.................................................................... 43 Inserts
Face Grooving Modules with HPC............................................... 44 Ordering Code System.......................................................................... 71
Modular Bodies with HPC................................................................... 46 GVN26 & GVN29 Close to Shoulder:
Modular V-CAP Holders with HPC. . .............................................. 48 Super Positive Rake Grooving. . ........................................................ 72
Turning & Grooving Chip Former................................................. 73
Square Grooving.. ....................................................................................... 74
2
Round Grooving......................................................................................... 76 Finishing
Parting Off. . ...................................................................................................... 77
GV29 Neutral:
Square Grooving.. ....................................................................................... 79 GrooVical
Round Grooving......................................................................................... 80 Precise Grooving & Turning Applications
Toolholders Technical Data.............................................................................................. 112
Ordering Code System.......................................................................... 82 Toolholders
Close to Shoulder External Toolholders. . ................................. 83 Ordering Code System.......................................................................... 114
Close to Shoulder External Toolholders 90°.. ........................ 84 Close to Shoulder Internal Toolholders. . .................................. 115
Modules with HPC.................................................................................... 85 Internal Toolholders (GV29)............................................................... 115
Modular Bodies with HPC................................................................... 86
Modular V-CAP Holders with HPC. . .............................................. 88
External Toolholders (GV29).............................................................. 89 Laydown Grooving
External Toolholders 90° (GV29)..................................................... 90 For Shallow Grooves
Technical Data.............................................................................................. 118
Inserts
Laydown Grooving
For Shallow Grooves Ordering Code System.......................................................................... 119
DIN 472 Retaining Ring Grooves for Bores............................ 120
Technical Data.............................................................................................. 92
DIN 7993 Snap Ring Grooves........................................................... 121
Inserts
CIRCLIP Inch Standard........................................................................... 122
Ordering Code System.......................................................................... 93 DIN 76 Thread Undercuts.................................................................... 123
DIN 471 Retaining Ring Grooves for Shafts.. ......................... 94
Toolholders......................................................................... . . . . . . . . . . . 124
DIN 7993 Snap Ring Grooves........................................................... 95
Ordering Code System.......................................................................... 124
CIRCLIP Inch Standard........................................................................... 95
Standard Toolholders. . ............................................................................ 125
DIN 76 Thread Undercuts.................................................................... 96
Standard Toolholders with Clamp.. .............................................. 126
Toolholders
Standard Toolholders with Carbide Shank............................ 127
Ordering Code System.......................................................................... 97
External Standard Toolholders........................................................ 98
External Standard Toolholders with Clamp.......................... 99 Mini-V
Precise Turning, Grooving, Threading
& Face Grooving
INTERNAL GROOVE TURNING Introduction................................................................................................... 130
Technical Data.............................................................................................. 132
Semi Finishing
Inserts
Ordering Code System.......................................................................... 134
VG-Cut
Boring.................................................................................................................. 135
Complete Range of Groove Turning Solutions
Boring with Chip Former..................................................................... 135
Technical Data.............................................................................................. 104 Boring & Profiling 30°.............................................................................. 136
Toolholders Boring & Profiling 45°.............................................................................. 136
Ordering Code System.......................................................................... 107 Back Boring..................................................................................................... 137
Internal VG-Cut............................................................................................ 108 Boring & Chamfering 45°..................................................................... 137
Grooving DIN 472 .. ................................................................................... 138
3
Square Grooving - .002” (0.05mm) Corner Radius........... 139 Face Chamfering 45°............................................................................... 185
Square Grooving ....................................................................................... 140 Threading......................................................................................................... 186
Round Grooving......................................................................................... 141 Toolholders
Square Face Grooving............................................................................ 142 Ordering Code System.......................................................................... 189
Round Face Grooving. . ........................................................................... 143 V-Cap Toolholders..................................................................................... 190
Threading......................................................................................................... 144 Shrink Toolholders ................................................................................... 191
Toolholders Round Toolholders without Shoulder. . ..................................... 192
Ordering Code System.......................................................................... 147 Round Double Sided Toolholders................................................ 192
Alloy Steel Shank........................................................................................ 148 Toolholders with Round Shank - 4 Flats.................................. 193
Reinforced Alloy Steel Shank............................................................ 149 Toolholders with Round Shank - 2 Flats.................................. 194
Carbide Shank.. ............................................................................................. 150 Square Shank Toolholders.. ................................................................. 195
Reinforced Carbide Shank.................................................................. 152 Drop Head Toolholders......................................................................... 196
Carbide Shank for Sleeves.. ................................................................. 153
V-CAP Holders ............................................................................................. 154 Groove Turning Accessories
Micro Holders for Carbide Shank Sleeve Clamping....... 155 Torque Limiters............................................................................................ 197
Torque Limiters Appendix.................................................................. 198
microscope
Mini Tools for Small & Medium Bores GROOVE MILLING
Introduction................................................................................................... 158
T
4
EXTERNAL
GROOVE TURNING
Semi Finishing
VG-Cut.. ....................................................................................................................... 7
S -Cut .. ....................................................................................................................... 49
Finishing
GrooVical. . .............................................................................................................. 67
Laydown Grooving ...................................................................... 91
EX TERNAL GR OOVE T U R NING | S E M I FI NI S H I NG
VG-Cut
Deep Grooving, Threading, Turning,
Parting Off & Face Grooving Applications
VG-Cut Complete Range of Turning Solutions
Deep Grooving, Threading, Parting Off, Boring and Face Grooving
VG-Cut tools provide a wider range of applications and options within the same insert pocket of Deep Grooving,
Parting Off, Turning, Profiling, Boring, Face Grooving and Threading. VG-Cut inserts also offer a variety of chip formers and
carbide grades, making the VG-Cut program a distinctly versatile system. VG-Cut inserts are designed with a unique
multifunctional and diverse geometry, to minimize inventory for the end-user.
VG-Cut tools cover a wide range of Threading Standards for machining between shoulders and close to the spindle for
up to shoulder depth of .394" (10.0mm).
Face Grooving Parting Off Deep Grooving Turning Profiling Threading Internal
& Turning & Undercut between Grooving
Shoulders & Turning
(See page107)
8
Insert, Tool and Cutting Data Selection Guide
Vargus No.
Hardness
Material VMG VPG VKG
Material Brinell
Group PVD M35 PVD P20 CVD K25
HB
D Desired Application P
3
4
5
Low Alloy Steel
(alloying elements≤5%)
High Carbon (C=0.55-0.85%)
Non Hardened
Hardened
170
180
275
80-140
80-140
50-120
90-220
90-220
60-160
90-250
90-250
60-180 11
Steel 6 Hardened 350 40-70 50-100 60-160
7 High Alloy Steel Annealed 200 80-140 90-220 90-250
8 (alloying elements>5%) Hardened 325 40-70 50-100 60-160
9 Low Alloy (alloying elements <5%) 200 80-140 90-220 90-250
Cast Steel
Selecting Insert and Tool as Pages
E
10 High Alloy (alloying elements >5%) 225 50-120 60-190 60-180
11 Stainless Steel Non Hardened 200 50-120 60-160
Items 28 Malleable
29 Cast Iron
Ferritic (short chips)
Pearlitic (long chips)
130
230
160-240
140-220
160-280
140-260
12-19
K
Cast Iron
30
31
Grey Cast Iron
Low Tensile Strength
High Tensile Strength
180
260
160-240
100-200
160-280
100-240
32 Ferritic 160 100-200 100-240
Nodular Sg Iron
33 Pearlitic 260 100-200 100-240
34 Aluminium Alloys Non Aging 60 150-300
35 Wrought Aged 100 150-250
N(K)
Non-Ferrous
36
37
Aluminium Alloys
Cast
Cast & Aged
75
90
150-300
150-300
Metals 38 Aluminium Alloys Cast Si 13-22% 130 150-250
39 Copper and Brass 90 150-300
40 Copper Alloys Bronze And Non Leaded Copper 100 150-300
19 Annealed (iron based) 200 25-40 30-50
S(M)
20 High Temperature Aged (iron based) 280 25-35 20-50
21 Alloys Annealed (nickel or cobalt based) 250 25-35 20-50
Heat
Resistant 22 Aged (nickel or cobalt based) 350 25-35 20-50
Material 23 Pure 99.5 Ti 400Rm 25-40 30-50
Titanium Alloys
24 α+β Alloys 1050Rm 25-60 30-70
H(K)
Hardened
25
Extra Hard Steel Hardened & Tempered
45-50HRc 20-40 30-50
9
Designated Chip Former Geometry for Parting Off and
Grooving
Application Material Group Standard Conditions Extreme Conditions
GT
GT Recommended GP
GP Recommended
P H choice for machining
alloy and stainless steel.
choice for machining
cast iron, for interrupted
Alloy Hardened
Steel Material Positive rake chip former cuts and for unstable
leads to low cutting applications where
forces during cutting. accuracy and overall
K A multifunctional chip machining stability are not
Cast former for parting, clear. Reinforced cutting
Iron grooving and turning. edge for parting off and
Parting Off grooving.
GM/GF GT
GT Recommended
Recommended choice choice for machining
M S for stainless steel. alloy and stainless steel.
Stainless Heat Positive sharp cutting Positive rake chip former
Steel Resistance edge decreases build- leads to low cutting
Grooving up on edge for parting forces during cutting,
N P off and grooving in low
feeds.
with multifunctional
chip former for parting,
Non- Mild
grooving and turning.
Ferrous Steel GM2 Ideal use for
parting off and grooving
in very low feeds
Threading
10
Designated Carbide Grade for Desired Application
Toughness
VMG - Very tough substrate, secured edge from chipping. PVD coated M35 for low
VMG M35 cutting speeds. Recommended for Parting Off on stainless steel and interrupted cuts.
VPG P20
applications. Excellent anti-fracture resistance.
PVD coated P20 for medium to high cutting
speeds. Recommended for alloy and stainless
steel in grooving and turning.
Hardness
Grooving Profiling
11
Technical Data
Recommended Cutting Speeds Vc [ft/min]
Vc [ft/min] Vc [ft/min]
Vargus No.
Material
Material
Hardness VMG VPG VKG for Parting Off
Group Brinell HB PVD M35 PVD P20 CVD K25
P
Low Alloy Steel
5 Hardened 275 160-400 200-490 200-590
(alloying elements≤5%)
Steel 6 Hardened 350 130-230 160-330 200-525 For Parting Off, improved
7 High Alloy Steel Annealed 200 160-330 300-490 300-820 chip forming and chip
8 (alloying elements>5%) Hardened 325 130-230 160-330 200-525 evacuation; reduce
9 Low Alloy (alloying elements <5%) 200 50-100 300-490 300-820
Cast Steel speed by ≈ 30%.
10 High Alloy (alloying elements >5%) 225 160-330 200-525 200-590
11 Stainless Steel Non Hardened 200 160-260 200-525
12 Ferritic Hardened 330 130-260 160-460
13 Stainless Steel Austenitic 180 160-260 200-525
M
Stainless
14 Austenitic
15 Stainless Steel
Super Austenitic
Non Hardened
200
200
160-260
160-260
200-525
200-525
Steel
16 Cast Ferritic Hardened 330 130-260 160-460
17 Stainless Steel Austenitic 200 160-260 200-525
18 Cast Austenitic Hardened 330 130-260 160-460
28 Malleable Ferritic (short chips) 130 525-660 525-920
29 Cast Iron Pearlitic (long chips) 230 460-720 460-850
K
Cast Iron
30
31
Grey Cast Iron
Low Tensile Strength
High Tensile Strength
180
260
525-660
330-660
525-920
330-780
32 Ferritic 160 330-660 330-780
Nodular Sg Iron
33 Pearlitic 260 330-660 330-780
34 Aluminium Alloys Non Aging 60 490-980 660-1450
35 Wrought Aged 100 490-820 660-1150
N(K)
Non-Ferrous
36
37
Aluminium Alloys
Cast
Cast & Aged
75
90
490-980 660-1450
490-980 660-1450
Metals 38 Aluminium Alloys Cast Si 13-22% 130 490-820 660-1150
39 Copper and Brass 90 490-980 660-1450
40 Copper Alloys Bronze And Non Leaded Copper 100 490-980 660-1450
19 Annealed (iron based) 200 65-40 100-160
S(M)
20 High Temperature Aged (iron based) 280 65-115 65-160
21 Alloys Annealed (nickel or cobalt based) 250 65-115 65-160
For gummy materials,
Heat such as stainless steel
Resistant 22 Aged (nickel or cobalt based) 350 65-115 65-160
Material
and heat resistant
23 Pure 99.5 Ti 400Rm 80-130 100-160
Titanium Alloys metals or in case of
24 α+β Alloys 1050Rm 65-160 65-160
build up on edge (cold
H(K)
Hardened
25
Extra Hard Steel Hardened & Tempered
45-50HRc 65-130 100-160 welding), increase
speed by ≈ 20%.
26 51-55HRc 50-100 80-150
Material
12
Technical Data
Recommended Cutting Speeds Vc [ft/min] for Threading
Vc [ft/min]
Vargus No.
P
Low Alloy Steel
5 Hardened 275 197-525
(alloying elements≤5%)
Steel 6 Hardened 350 164-328
7 High Alloy Steel Annealed 200 295-722
8 (alloying elements>5%) Hardened 325 164-328
9 Low Alloy (alloying elements <5%) 200 295-722
Cast Steel
10 High Alloy (alloying elements >5%) 225 197-525
11 Stainless Steel Non Hardened 200 197-525
12 Ferritic Hardened 330 164-459
13 Austenitic 180 197-525
M
Stainless Steel
14 Austenitic Super Austenitic 200 197-525
Stainless 15 Stainless Steel Non Hardened 200 197-525
Steel Cast Ferritic
16 Hardened 330 164-459
17 Stainless Steel Austenitic 200 197-525
18 Cast Austenitic Hardened 330 164-459
28 Malleable Ferritic (short chips) 130 525-787
29 Cast Iron Pearlitic (long chips) 230 459-722
K
Cast Iron
30
31
Grey Cast Iron
Low Tensile Strength
High Tensile Strength
180
260
525-787
328-656
32 Ferritic 160 328-656
Nodular Sg Iron
33 Pearlitic 260 328-656
34 Aluminium Alloys Non Aging 60 656-1476
35 Wrought Aged 100 656-1148
N(K)
Non-Ferrous
36
37
Aluminium Alloys
Cast
Cast & Aged
75
90
656-1476
656-1476
Metals 38 Aluminium Alloys Cast Si 13-22% 130 656-1148
39 Copper and Brass 90 656-1476
40 Copper Alloys Bronze And Non Leaded Copper 100 656-1476
19 Annealed (iron based) 200 98-164
20 Aged (iron based) 280 66-164
S(M)
High Temperature
21 Alloys Annealed (nickel or cobalt based) 250 66-164
Heat Resistant 22 Aged (nickel or cobalt based) 350 66-164
Material
23 Pure 99.5 Ti 400Rm 98-164
Titanium Alloys
24 α+β Alloys 1050Rm 98-230
H(K)
Hardened Material
25
26
Extra Hard Steel Hardened & Tempered
45-50HRc
51-55HRc
66-131
49-98
13
Feed Rate (f) Starting Point for
Deep Grooving, Face Grooving
& Parting Off
f [in/rev] .079" (2mm) Insert Width f [in/rev] .118" (3mm) Insert Width
.012 .012
.010 .010
.008 .008
.006 .006 GP
GT
.004 .004
GM
.002 GP .002
GT GM2
GF
.000 .000
Chip Former GF GT GP Chip Former GM2 GM GT GP
f [in/rev] .002 .003 .004 f [in/rev] .003 .005 .006 .007
f [in/rev] .157" (4mm) Insert Width f [in/rev] .197" (5mm) Insert Width
.012 .012
GP
.010 GP .010
GT GT
.008 .008
GM GT2
.006 .006
.004 .004
.002 .002
.000 .000
Chip Former GM GT GP Chip Former GT2 GT GP
f [in/rev] .006 .007 .009 f [in/rev] .006 .008 .010
.002
For Parting Off, it is recommended to reduce feed
rate by 50% as the insert approaches rotation center.
Reduce feed when the insert approaches approx. 3.0
.000 mm diameter.
Chip Former GT GP
For better chip evacuation in Face Grooving,
f [in/rev] .009 .011
creating short chips is preferable. It is therefore
recommended to work in short intervals (pecking), at
a maximum grooving depth of twice the insert width.
Taking into consideration the workpiece material and
groove diameter, it is recommended to begin the first
cut at no longer than the insert’s width.
14
Feed Rate (f) and Depth of Cuts for Axial
Turning, Profiling and Face Grooving
ap [in] .079" (2mm) Width GT & GR ap [in] .118" (3mm) Width GT & GR
.036 .071
.031 .063
.028 .055
.024 .047
.020 GT GR
.039
GT
.016 .031
.012 GR .024
.008 .016
.004 .008
0 0
0 .002 .004 .006 .008 0 .004 .008 .012 .016 .020 .024 .028
f [in/rev] f [in/rev]
Recommended Starting Point: Recommended Starting Point:
GT .079" GR .079" GT .118" GR .118"
ap [in] .020 .020 ap [in] .047 .039
f [in/rev] .002 .003 f [in/rev] .006 .010
ap [in] .157" (4mm) Width GT & GR ap [in] .197" (5mm) Width GT & GR
.118 .138
.098 .118
.098
.079
GM GT
.079
.059
.059
GT GR GR
.039
.039
.020 .020
0 0
0 .004 .008 .012 .016 .020 .024 .028 0 .004 .008 .012 .016 .020 .024 .028
f [in/rev] f [in/rev]
Recommended Starting Point: Recommended Starting Point:
GT .157" GR .157" GT2 .197" GT .197" GR .197"
ap [in] .059 .063 ap [in] .079 .079 .079
f [in/rev] .007 .012 f [in/rev] .006 .008 .013
.118
.098
GT GR
.079
.059
.039
.020
0
0 .004 .008 .012 .016 .020 .024 .028
Recommended Starting Point: f [in/rev]
GT .236" GR .236"
ap [in] .098 .098
f [in/rev] .009 .014
15
Radial Groove and Turn Machining Recommendations
Roughing:
Detail A
Method 1:
W
A
Dmax. (outer)
.006
.002
Figure A Figure B
Method 2:
Figure A Figure B
1. Start by radial grooving far from spindle (Figure A), making sure that the material is always being machined at the
center of the insert.
2. Continue to work towards spindle, leaving excess material between each groove. The excess material should not
be wider than the insert's width minus 2 times the radius: W-Rx2=max. grooving width.
3. Radial groove the excess material (Figure B).
16
Radial Groove and Turn Machining Recommendations
Finishing:
Figure A Figure B
1. Start the profiling operation close to spindle, and towards the workpiece's inner diameter.
Generate the desired radius followed by longitudinal turning close to the tangential
point of the second inner radius (Figure A).
2. Start the Profiling operation far from spindle, and towards the workpiece's inner diameter.
Generate the desired radius as needed (Figure B).
17
Face Groove and Turn Machining Recommendations
Roughing:
Method 1:
Detail A
Dmax. (outer)
W
.006
.002
Figure A Figure B
Method 2:
Dmax.
Dmax.
Figure A Figure B
1. Start by face grooving close to outer diameter (Figure A). Work in short intervals (pecking) at maximum grooving
depth of twice the insert width.
2. Follow this by face grooving towards the center of the workpiece as required for covering the entire pocket shape
(Figure B). Each additional groove width should be smaller than the insert width by approximately .012" (0.3mm).
3. Only the first groove (Figure A) is done in short intervals (pecking) for better chip evacuation. Other grooves can
be done continuously based on recommended feeds for the application.
4. Recommended chip forming for Alloy Steel is GP. For Stainless Steel please use GT.
See the following page for Finishing Recommendations.
18
Face Groove and Turn Machining Recommendations
Finishing:
1. Start the Profiling operation from the outer diameter of the workpiece and work in.
Generate the desired radius followed by the face turning operation close to the tangential point of the inner
radius.
2. Start the Profiling operation from the inner diameter towards the bottom of the workpiece, generate the desired
radius as needed.
D min
D max
19
User Guide for Modular System
Choosing the Correct Holder for the Application (Body + Module):
* High pressure coolant system shown
20
High Pressure Coolant Accessories and Spare Parts
21
22
VG-Cut Inserts
Parting Off & Deep Grooving - Double Sided Inserts .059" - .236" (1.5 - 6.0mm).. ......................... 24
Parting Off & Deep Grooving - Single Sided Inserts .079" - .157" (2.0 - 4.0mm).............................. 26
Turning & Profiling .079" - .236" (2.0 - 6.0mm)............................................................................................................ 27
Threading .118" (3.0mm).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................................................... 28
1 – Line Name 2 – Number of Cutting Corners 3 – Insert Width, inch (mm) 4 – Corner Radius
VG - VG-Cut D - Double .059" (1.5), .079" (2.0), .118" (3.0), 0.20 mm
S - Single .157" (4.0), .197" (5.0), .236" (6.0) Threading Standard
5 – RH or LH (for Parting Off) 5 – RH or LH (for Threading) 6 – Top Rake Geometry 7– Carbide Grade
4, 6, 15 Deg. RH or LH RH Helix GP, GM, GM2, GT, GT2, GR VPG, VMG, VKG
None - Neutral LH Helix RS - Close to right shoulder
LS - Close to left shoulder
23
L ref
L ref
Right
Hand
K
L Lrefref L ref
Neutral
R
t max
t max
RR
W
WW
RR K
Left
Hand
2 Corners
(VGD)
24
L ref
L ref
Right
Hand
K
L Lrefref L ref
Neutral
R
t max
t max
RR
W
WW
RR K
Left
Hand
2 Corners
(VGD)
25
L ref
L ref
Right
Hand
K
L ref
L ref
Neutral
R
R
W
W
K
Left
Hand
1 Corner
(VGS)
26
Turning & Profiling
.079" - .236" (2.0 - 6.0mm) Width
L ref L ref
R t max t max
R
GT GR
W W
27
Threading
.118" (3.0mm) Width
L ref
RS/LS Varied range of threading standards for
machining between shoulders and close to spindle.
W RS Full Profile
Y
Y
W LS Full Profile
Y
W Partial Profile
R
To be used with Monoblock tools (VGE..T08 or T12) or reinforced monoblock tools (PH) only.
Y Y Y
Y Y Y
ISO Metric Y
X
Pocket No. of Min. Thread
Ordering Code Dimensions Inch Helix Grade
1/4P Internal Size Passes Diameter
60° Pitch W ref VPG
L h min Y L ref Deg
mm Inch mm
h 3 VGD3.0ISO0.4RH-LS 0.40
IC
.010 .015 3-7 4° • M2x0.4
1/8P External 3 VGD3.0ISO0.50RH-RS/LS 0.50 .012 .021 5-7 • M3x0.5
Defined by: 3 VGD3.0ISO0.70RH-RS/LS 0.70 .017 .025 5-8 • M4x0.7 Coarse
R262 (DIN 13)
Tolerance class: 6g
3 VGD3.0ISO0.75RH-RS/LS 0.75 .018 .025 5-8 • M5x0.75
3 VGD3.0ISO0.75LH-LS 0.75 .018 .025 5-8 • M5x0.75
3 VGD3.0ISO0.80RH-RS/LS 0.80
0.118 3.00
.019 .025
.862
5-8 • M5x0.8 Coarse
3 VGD3.0ISO1.00RH-RS/LS 1.00 .024 .029 5-9 2.5° • M6x1
3 VGD3.0ISO1.25RH-RS/LS 1.25 .030 .033 6 - 10 • M8x1.25
3 VGD3.0ISO1.50RH-RS/LS 1.50 .036 .043 7 - 12 • M10x1.5 Coarse
3 VGD3.0ISO1.75RH-RS/LS 1.75 .042 .047 8 - 14 • M12x1.75 Coarse
3 VGD3.0ISO2.00RH-RS/LS 2.00 .048 .051 9 - 14 • M16x2.0 Coarse
3 VGD3.0ISO2.50RH-RS/LS 2.50 .060 .061 8 - 14 • M18x2.5 Coarse
| • In stock ° Available upon request
28
Threading
.118" (3.0mm) Width (con't)
L ref
RS/LS Varied range of threading standards for
machining between shoulders and close to spindle.
W RS Full Profile
Y
Y
W LS Full Profile
Y
W Neutral Full
R Profile
To be used with Monoblock tools (VGE..T08 or T12) or reinforced monoblock tools (PH) only.
American UN Y
X
Pocket No. of Min. Thread
Ordering Code Dimensions Inch Helix Grade
Size Passes Diameter
1/4P Internal
60° Pitch W ref VPG
h min Y L ref Deg
TPI Inch mm L
h 3 VGD3.0UN80RH-RS/LS 80 .007 .014 3-5 • No.0-80UNF
3 VGD3.0UN72RH-LS 72 .009 .015 3IC- 5
4°
• No.1-72UNF
1/8P External
3 VGD3.0UN56RH-RS/LS 56 .011 .016 3-6 • No.2-56UNC
Defined by: ANSI B1.1:74
Tolerance class: 2A
3 VGD3.0UN40RH-RS/LS 40 .015 .024 3-7 • No.4-40UNC
3 VGD3.0UN32RH-RS/LS 32 .019 .026 5-8 • 5/32"-32UNC
3 VGD3.0UN28RH-RS/LS 28 .022 .028 5-9 • 3/16"-28UNC
3 VGD3.0UN24RH-RS/LS 24 .118 3.00 .026 .030 .862 5-9 • 7/32"-24UNC
3 VGD3.0UN20RH-RS/LS 20 .031 .034 6 - 10 • 1/4"-20UNC
3 VGD3.0UN18RH-RS/LS 18 .034 .037 7 - 12 2.5° • 5/16"-18UNC
3 VGD3.0UN18LH-LS 18 .034 .037 7 - 12 • 5/16"-18UNC
3 VGD3.0UN16RH-RS/LS 16 .038 .043 7 - 12 • 3/8"-16UNC
3 VGD3.0UN14RH-RS/LS 14 .044 .043 8 - 14 • 7/16"-14UNC
3 VGD3.0UN12RH-RS/LS 12 .051 .051 8 - 14 • 9/16"-14UNC
| • In stock ° Available upon request
Whitworth Y
X
Pocket No. of Min. Thread
Ordering Code Dimensions Inch Helix Grade
Size Passes Diameter
R 0.137P Internal
55° Pitch W ref VPG
h min Y L ref Deg
TPI Inch mm L
h 3 VGD3.0W36RH-LS 36 .034 .037 5-8 •
R 0.137P
External
3 VGD3.0W32RH-LS 32 .046 .045 5 - 8 IC •
Defined by: B.S.84:1956,
3 VGD3.0W26RH-LS 26
.118 3.00
.058 .066
.862
5-8
2.5°
•
DIN 259, ISO228/1:1982 3 VGD3.0W19RH-RS/LS 19 .018 .024 7 - 12 • 1/2"-19BSW
Tolerance class: 3 VGD3.0W14RH-RS/LS 14 .020 .024 8 - 14 • 1/2"-14BSW
Medium class A 3 VGD3.0W11RH/LH 11 .025 .030 8 - 14 • 5/8"-11BSW
| • In stock ° Available upon request
Y Y
Y
NPT X X X
L
X
Internal Pocket No. of Min. Thread
30° 30° Ordering Code Dimensions Inch Helix Grade
Size Passes
IC Diameter
h L Pitch L W ref L VPG
h min Y L ref Deg
TPI Inch mm
Y
90° 1°47’
3 VGD3.0NPT18RH-RS/LSIC 18 IC .040 .047 IC 7 - 12 • 1/4"-18NPT
External 3 VGD3.0NPT14RH-RS/LS 14
.118 3.00
.052 .055
.862
8 - 14
1.5°
• T 1/2"-14NPT
Defined by: USAS B2.1:1968 3 VGD3.0NPT11.5RH/LH 11.5 .065 .063 9 - 15 • 1"-11.5NPT
Tolerance class: Standard NPT 3 VGD3.0NPT11.5RH-RS/LS 11.5 .065 .063 9 - 15 • 1"-11.5NPT
| • In stock ° Available upon request
29
VG-Cut Tools
External Monoblock Tools with HPC.. . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... NEW 31
External Monoblock Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 32
Reinforced Monoblock Tools with HPC. . . . . . . . . . . . . . . . ........................................................................................................... NEW 34
Reinforced Monoblock Tools .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 35
Blades with HPC. . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 36
Blades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 36
Reinforced Blades (Screw Clamping) with HPC........................................................................................................ NEW 37
Reinforced Blades (Screw Clamping). . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 38
Reinforced Blades.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 39
Blade Holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 39
Radial Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 40
Modular Bodies.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 41
Radial Modules with HPC.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 43
Face Grooving Modules with HPC.. . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 44
Modular Bodies with HPC.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 46
Modular V-CAP Holders with HPC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................................................................................................... 48
Blades VG P 32 4 D C
1 2 7 4 8 11
Modules VG A R 20 T25 4 S C
1 2 9 7 5 4 8 11
VB M R 100 00 C
Modular Bodies
1 6 9 3 7 11
V-CAP Bodies VB C R C5 - 90 - C
1 2 9 3 7 11
30
External Monoblock Tools with High Pressure Coolant Thru
Grooving, Parting Off, Turning & Threading
L2
H H1
H2
L1
PW
B F
Spare Parts
31
External Monoblock Tools
Grooving, Parting Off, Turning & Threading | I N C H
L2 L2
H H H1 H1
H2 H2
a a
L1 L1
PW PW
B B F F
t maxt max
| Right hand shown
Spare Parts
** Mounting and Replacing Inserts for 5mm & 6mm Monoblock Toolholders:
Unlock the top screw using the Place the same key in the “pocket.” Now remove the key from the
1 key provided. 2 Turn and hold the key to loosen the 3 pocket and secure the insert by
pocket and remove the insert. firmly locking the top screw.
Place the new insert in the pocket.
32
External Monoblock Tools
Grooving, Parting Off, Turning & Threading | M E T R I C
L2 L2
H H H1 H1
a H2 H2
a L1
L1
PW PW
B B F F
t maxt max
| Right hand shown
Spare Parts
** Mounting and Replacing Inserts for 5mm & 6mm Monoblock Toolholders:
Unlock the top screw using the key Place the same key in the “pocket.” Now remove the key from the
1 provided. 2 Turn and hold the key to loosen the 3 pocket and secure the insert by
pocket and remove the insert. firmly locking the top screw.
Place the new insert in the pocket.
L2
D max
H H1
H2
**
a L1
** Bottom inlet
from shank 20mm and above
PW
B F
Spare Parts
The following VARGUS accessories for use with HPC can be ordered separately:
1. Tube Connector 25-6P (x1)
2. Fittings (x2): Angled Fitting M6x6P or Straight Fitting M6x6P
For more information see page 21.
34
Reinforced Monoblock Tools
Grooving, Parting Off & Threading
L2 L2
D max D max
Figure 1
H H H1 H1
L1 H2
L1 H2 L2
D max
a a L2
D max
H H1
PW PW
Figure 2 L1
B H B H1
F F
a
L1
a
PW
B F PW
D max
PW
H H1
L1 a
Spare Parts
H PW Sealing Cap
D max* H1 L1 a Key** Sealing Cap
Inch mm Inch mm Key***
VGP26-3DC 1.024 26.0 .118 3.0 2.756 .843 4.331 .094 VP-3 Key WS-15IP WS-15IP
VGP32-3DC 1.260 32.0 .118 3.0 3.937 .976 5.906 .094 VP-3 Key WS-15IP WS-15IP
VGP32-4DC 1.260 32.0 .157 4.0 3.937 .976 5.906 .134 VP-4 Key WS-15IP WS-15IP
| Blades marked with C are offered with High Pressure Coolant.
* D max figures presented are for single sided insert (VGS).
** Not included. Please order separately.
Blades
Grooving & Parting Off
D max
PW
H H1
L1 a
Spare Parts
H PW
D max* H1 L1 a Key**
Inch mm Inch mm
VGP26-2D 1.024 26.0 .079 2.0 1.969 .843 4.331 .071
VGP32-2D 1.260 32.0 .079 2.0 1.969 .976 5.906 .071
VGP26-3D 1.024 26.0 .118 3.0 2.756 .843 4.331 .094 VP-3
VGP32-3D 1.260 32.0 .118 3.0 3.937 .976 5.906 .094
VGP35-3S 1.378 35.0 .118 3.0 3.937 1.319 5.906 .094
VGP32-4D 1.260 32.0 .157 4.0 3.937 .976 5.906 .134 VP-4
VGP32-5D 1.260 32.0 .197 5.0 3.937 .976 5.906 .157
VP-G
VGP32-6D 1.260 32.0 .236 6.0 3.937 .976 5.906 .205
| Blades marked with C are offered with High Pressure Coolant.
* D max figures presented are for single sided insert (VGS).
** Not included. Please order separately.
36
Reinforced Blades (Screw Clamping)
NEW
with High Pressure Coolant Thru | Grooving, Parting Off
L1
31.5
PW D max
H1 H
a
B
Spare Parts
H PW D max*
RH/LH H1 L1 B a Screw** Key
Inch mm Inch mm Inch mm
VGWSR 26-2SRC 1.024 26.0 .079 2.0 1.811 46.0 .843 4.331 .315 .071
VGWSR 26-2SLC 1.024 26.0 .079 2.0 1.811 46.0 .843 4.331 .315 .071
VGWSL 26-2SLC 1.024 26.0 .079 2.0 1.811 46.0 .843 4.331 .315 .071
VGWSL 26-2SRC 1.024 26.0 .079 2.0 1.811 46.0 .843 4.331 .315 .071
VGWSR 32-2SRC 1.260 32.0 .079 2.0 1.811 46.0 .976 4.724 .315 .071
VGWSR 32-2SLC 1.260 32.0 .079 2.0 1.811 46.0 .976 4.724 .315 .071
VGWSL 32-2SLC 1.260 32.0 .079 2.0 1.811 46.0 .976 4.724 .315 .071
VGWSL 32-2SRC 1.260 32.0 .079 2.0 1.811 46.0 .976 4.724 .315 .071
SM4.0x16-T20 K6T
VGWSR 26-3SRC 1.024 26.0 .118 3.0 1.811 46.0 .843 4.331 .315 .094
VGWSR 26-3SLC 1.024 26.0 .118 3.0 1.811 46.0 .843 4.331 .315 .094
VGWSL 26-3SLC 1.024 26.0 .118 3.0 1.811 46.0 .843 4.331 .315 .094
VGWSL 26-3SRC 1.024 26.0 VGWSL...SLC
.118 VGWSL...SLC
3.0 1.811 VGWSL...SLC
VGWSL...SRC .843 VGWSL...SLC
46.0 VGWSL...SRC
4.331 .315VGWSR...SRC
VGWSL...SRC
.094 VGWSR...SRC
VGWSL...SRC VGWSR...SLC
VGWSR...SRC VGWSR...SLC
VGWSR...SRC
VGWSR 32-3SRC 1.260 32.0 .118 3.0 1.811 46.0 .976 4.724 .315 .094
VGWSR 32-3SLC 1.260 32.0 .118 3.0 1.811 46.0 .976 4.724 .315 .094
VGWSL 32-3SLC 1.260 32.0 .118 3.0 1.811 46.0 .976 4.724 .315 .094
VGWSL 32-3SRC 1.260 32.0 .118 3.0 1.811 46.0 .976 4.724 .315 .094
VGWSL...SLCVGWSL...SLC VGWSL...SRC
VGWSL...SRC VGWSR...SRC VGWSR...SRC VGWSR...S
* D max figures presented are for VGWSL...SLC
single sided insert (VGS). VGWSL...SRC VGWSR...SRC
VGWSL...SLC
** Recommended tightening torque: PW2 - 3Nm, PW3 - 4.5Nm. VGWSL...SRC VGWSR...SRC
VGWSL...SLC VGWSL...SLC
VGWSL...SRC VGWSL...SLC
VGWSL...SRC
VGWSR...SRC VGWSL...SLC
VGWSL...SRC
VGWSR...SRC
VGWSR...SLC VGWSL...SRC
VGWSR...SRC
VGWSR...SLC VGWSR...SRC
VGWSR...SLC VGWSR...SLC
37
VGWSL...SLC
VGWSL...SLC VGWSL...SRC
VGWSL...SRC VGWSR...SRC
VGWSR...SRC VGWSR...SLC
VGWSR...SLC
Reinforced Blades (Screw Clamping) NEW
Grooving, Parting Off
L1
31.5
PW D max
H1 H
a
B
Spare Parts
H PW D max*
RH/LH H1 L1 B a Screw** Key
Inch mm Inch mm Inch mm
VGWSR 26-2SR 1.024 26.0 .079 2.0 1.811 46.0 .843 4.331 .315 .071
VGWSR 26-2SL 1.024 26.0 .079 2.0 1.811 46.0 .843 4.331 .315 .071
VGWSL 26-2SL 1.024 26.0 .079 2.0 1.811 46.0 .843 4.331 .315 .071
VGWSL 26-2SR 1.024 26.0 .079 2.0 1.811 46.0 .843 4.331 .315 .071
VGWSR 32-2SR 1.260 32.0 .079 2.0 1.811 46.0 .976 4.724 .315 .071
VGWSR 32-2SL 1.260 32.0 .079 2.0 1.811 46.0 .976 4.724 .315 .071
VGWSL 32-2SL 1.260 32.0 .079 2.0 1.811 46.0 .976 4.724 .315 .071
VGWSL 32-2SR 1.260 32.0 .079 2.0 1.811 46.0 .976 4.724 .315 .071
SM4.0x16-T20 K6T
VGWSR 26-3SR 1.024 26.0 .118 3.0 1.811 46.0 .843 4.331 .315 .094
VGWSR 26-3SL 1.024 26.0 .118 3.0 1.811 46.0 .843 4.331 .315 .094
VGWSL 26-3SL 1.024 26.0 .118 3.0 1.811 46.0 .843 4.331 .315 .094
VGWSL 26-3SR 1.024 26.0 .118 3.0 1.811 46.0 .843 4.331 .315 .094
VGWSR 32-3SR 1.260 32.0 .118 3.0 1.811 46.0 .976 4.724 .315 .094
VGWSR 32-3SL 1.260 32.0 .118 3.0 1.811 46.0 .976 4.724 .315 .094
VGWSL 32-3SL 1.260 32.0 .118 3.0 1.811 46.0 .976 4.724 .315 .094
VGWSL 32-3SR 1.260 32.0 .118 3.0 1.811 46.0 .976 4.724 .315 .094
* D max figures presented are for single sided insert (VGS).
** Recommended tightening torque: PW2 - 3Nm, PW3 - 4.5Nm.
38
Reinforced Blades
Grooving, Parting Off
PW D max
H1 H
a
B L1
Spare Parts
H PW
RH/LH D max* H1 L1 B a Key**
Inch mm Inch mm
VGWR/L26-2S 1.024 26.0 .079 2.0 1.969 .834 4.331 .315 .071
VGWR/L32-2S 1.260 32.0 .079 2.0 1.969 .972 4.331 .315 .071
VP-3
VGWR/L26-3S 1.024 26.0 .118 3.0 1.969 .834 4.331 .315 .094
VGWR/L32-3S 1.260 32.0 .118 3.0 1.969 .972 4.331 .315 .094
* D max figures presented are for single sided insert (VGS).
** Not included. Please order separately.
Blade Holders
Coolant Inlet
G1/8"
L
H b
L1
B
L2
Spare Parts
D max
H1
L1
PW
a*Right hand shown
PW H1
RH/LH D max F L1 a
Inch mm Inch mm
VGAR/L20T25-2S .079 2.0 1.575 .787 20 .146 .866 .055
VGAR/L20T25-3S .118 3.0 1.575 .787 20 .126 .945 .094
VGAR/L20T25-4S .157 4.0 1.732 .787 20 .114 .945 .118
VGAR/L25T25-2S .079 2.0 1.575 .984 25 .205 .866 .055
VGAR/L25T25-3S .118 3.0 1.575 .984 25 .185 .945 .094
VGAR/L25T25-4S .157 4.0 1.732 .984 25 .173 .945 .118
D max t max
1.969 .787
3.937 .669
5.906 .63
7.874 .598
D min
D min
D min
and 3.
2. Clamp module to body with screw
no. 1, followed by screw no. 2.
as as ar ar 3. Finally, clamp the insert to the holder
using screw no. 3.
40
Modular Bodies for Grooving, Parting Off & Turning | I N C H
H2 H1 H
H2 H1 L2 H
L1
L2
L1
F B1 B
F B1 B
| Right hand shown
Spare Parts
H2 H1 H
L2
L1
B
90°
| Right hand shown
Spare Parts
H2 H1 H
H2 H1 H
45° F B1 B
45° F L2 B1 B
L1
| Left hand shown L2
L1 Spare Parts
SM5x13.5 T20
VBMR/L100-45 1.00 1.00 1.024 1.197 5.5 .984 .709 TK-T20
SM5x18 T20
| For 45º Right-hand Tool: Use right-hand body with left-hand module.
41
Modular Bodies for Grooving, Parting Off & Turning | M E T R I C
F B1 B
F B1 B
| Right hand shown Spare Parts
H/H1 B
RH/LH B1 H2 F L1 L2 Conical Screw* Key
Inch mm Inch mm
VBMR/L2020-00 .787 20 .787 20 .957 .945 .793 4.331 .787 SM4x14 T15 KT-15
VBMR/L2525-00 .984 25 .984 25 1.220 1.181 1.004 5.512 .984 SM5x18 T20 K6T
L2
L1
B
90°
H/H1 B
RH/LH H2 L1 L2 Conical Screw* Key
Inch mm Inch mm
VBMR/L2020-90 .787 20 .787 20 .945 4.331 .787 SM4x14 T15 KT-15
VBMR/L2525-90 .984 25 .984 25 1.181 5.512 1.102 SM5x18 T20 K6T
| For 90º Right-hand Tool: Use right-hand body with left-hand module.
H2 H1 H
45° Square Bodies
H2 H1 H
45° F B1 B
45° F L2 B1 B
L1
L2
| Left hand shown L1 Spare Parts
H/H1 B
RH/LH B1 H2 L1 L2 F Conical Screw* Key
Inch mm Inch mm
"SM4x10.5 T15
VBMR/L2020-45 .787 20 .787 20 0.846 0.945 4.331 0.787 0.571 KT-15
SM4x14 T15"
"SM5x13.5 T20
VBMR/L2525-45 .984 25 .984 25 1.024 1.181 5.512 0.984 0.709 K6T
SM5x18 T20"
| For 45º Right-hand Tool: Use right-hand body with left-hand module.
* Tightening Torque: T15 screws - 5 Nm max , T20 screws - 7 Nm max.
42
Radial Grooving Modules with High Pressure Coolant Thru
H1
F t max
PW a
Spare Parts
PW t max
RH/LH H/H1 F L1 a Screw* Key
Inch mm Inch mm
VGAR/L-T09-2C .079 2.0 .354 9.0 1.260 .547 1.690 .062
VGAR/L-T18-2C .079 2.0 .709 18.0 1.260 .547 2.050 .062
VGAR/L-T10-3C .118 3.0 .394 10.0 1.260 .524 1.730 .098
VGAR/L-T20-3C .118 3.0 .787 20.0 1.260 .524 2.130 .098
VGAR/L-T12-4C .157 4.0 .472 12.0 1.260 .512 1.810 .122
SM5x16 K4H
VGAR/L-T24-4C .157 4.0 .945** 24.0 1.260 .512 2.280 .122
VGAR/L-T15-5C .197 5.0 .591 15.0 1.260 .531 1.930 .157
VGAR/L-T30-5C .197 5.0 1.181** 30.0 1.260 .492 2.520 .157
VGAR/L-T20-6C .236 6.0 .787 20.0 1.260 .512 2.130 .197
VGAR/L-T40-6C .236 6.0 1.575** 40.0 1.260 .512 2.910 .197
* Tightening Torque 7 Nm max.
** T max figures presented for single sided inserts (VGS).
Mounting and Replacing Inserts for Radial and Face Grooving Modules with High
Pressure Coolant Thru:
Unlock the top screw using the key Place the same key in the “pocket.” Now remove the key from the
1 2 3
provided. Turn and hold the key to loosen the pocket and secure the insert by
pocket and remove the insert. firmly locking the top screw.
Place the new insert in the pocket.
L1
D min
Workpiece rotation for t max
Face Grooving: PW
- Clockwise for left-hand
application
- Counter-clockwise for F
D max
right-hand application
* Right hand shown
Spare Parts
L1
D min
Workpiece rotation for t max
Face Grooving: PW
- Clockwise for left-hand
application
- Counter-clockwise for F
D max
right-hand application
* Right hand shown
Spare Parts
45
Modular Bodies with High Pressure Coolant
for Grooving, Face Grooving, Parting Off and Turning | I N C H
L2 Coolant Inlet
G1/8"
H2 H1 H
h
L1
F B
L2
Coolant Inlet
G1/8"
H2 H
H1
h
L1
B
90°
Necessary Parts When Using Modules with High Pressure Coolant Thru:
1. Tube Connector 25-6P (x1)
2. Fittings (x2): Straight Fitting G1_8x6P or Angled Fitting G1_8x6P
The above items are not included and should be ordered separately. For more information please see page 21.
46
Modular Bodies with High Pressure Coolant
for Grooving, Face Grooving, Parting Off and Turning | M E T R I C
L2 Coolant Inlet
G1/8"
H2 H1 H
h
L1
F B
L2
Coolant Inlet
G1/8"
H2 H
H1
h
L1
B
90°
Necessary Parts When Using Modules with High Pressure Coolant Thru:
1. Tube Connector 25-6P (x1)
2. Fittings (x2): Straight Fitting G1_8x6P or Angled Fitting G1_8x6P
The above items are not included and should be ordered separately. For more information please see page 21.
47
Modular V-CAP Holders with HPC
H1
L1
.507"
12.9mm L
Clamping Anti
Modular Coolant
D L L1 L2 F H1 Screw* Key Vibration
Cover Seal
(x2) O-Ring
VBC C4-00-C 1.575 3.071 2.126 .827 .669
Coolant O-RING
VBC C5-00-C 1.969 3.465 2.283 .827 .728 1.260 SM8x18 K6H VG-MC
Sleeve Body Seal
VBC C6-00-C 2.480 3.858 2.362 .906 .965
D
H1
L2
L1
L
B2
B1
48
EX TERNAL GR OOVE T U R NING | S E M I FI NI S H I NG
50
** Custom-made according to custom
ST-Cut Technical Data
Geo-Rake Angle
The maximum diameter for parting off is .669” (17.0mm), and up to .118” (3.0mm) notch width.
The insert corner can pass the center of rotation up to .008” (0.2mm).
Rake Angle
8° / 17° 0°
Recommended for specific applications, depending Insert geometry designed for general use applications.
on the type of application and workpiece material. Relatively dull edge, which creates fewer fractures.
Relatively sharp edge, designed for less build-up on Recommended for High Alloy Steels and hard abrasive
the insert cutting edge. materials.
Highly recommended for Gummy materials such
Stainless Steel and Titanium.
Grades
ST-Cut inserts are offered in two different grades: VPG and VS020.
VPG is PVD coated, for medium and high speeds.
VS020 is uncoated to ensure a sharper cutting edge, crucial for very small parts when the cutting speeds
are relatively low and light cutting is required.
Grade Application Sample
Sub-micron substrate for a wide range of applications.
Excellent anti-fracture resistance.
VPG
AlTiN PVD coated P20, for medium to high cutting speeds.
Excellent for alloy steel, stainless steel, and Titanium.
Uncoated Sub-micron substrate for a wide range of applications.
Excellent anti-fracture resistance.
VS020
Recommended for medium to low cutting speeds.
Excellent for alloy steel, stainless steel, and Titanium.
51
mer’s application
Cutting Recommendations and Tool Types
Close to Sub Spindel
with Support from Main Spindel T
STEL..-85 (LH Inserts) When parting off small diameter parts, without the support of
the sub spindle, it is recommended to use an ST-Cut Parting Off
insert with a lead angle, thereby eliminating the center boss
(See Figure 1).
Figure 1:
Parting Off Close to Main Spindle -
STER…-85 RH tool with RH insert/RH
lead angle
L2
Figure 2:
Parting Off Close to Sub Spindle -
STEL…-85 LH tool with LH insert
T T
Close to Sub
T Spindel The ST-Cut tool offering includes “Stepped Tools” – STESR/L and
STE90R..-85 (LH Inserts) STESRS – for short part lengths, where both the main and the
sub-spindles are used.
The maximum length exceeding the center of the workpiece is
.008” (0.2mm) (See Figures 3 and 4).
B1
se to Sub Spindel
Parting Off Close
to Main Spindle –
STESR…-85 RH tool
Figure 4:
Parting Off Close to Sub
Spindle – STESRS…-85
RH tool with LH insert
90R..-85 (LHSTR90L..-85
Inserts) (RH Insert
with RH insert
(LH tool also available)
L2 L2
B1
52
B1
ST-Cut Recommended Cutting Speeds
In bar-feeder machines (Swiss Type, Slide Machines, etc.), turn speed limitations of the bar feeder often dictate
the actual cutting speed.
The recommended cutting speeds in the table below should be used if the machine can achieve such speeds.
ST-Cut tools are also designed to work at much lower speeds, and up to 40% faster if needed, depending on
the material properties, such as hardness and tensile strength.
Vargus No.
1
Unalloyed Steel
2 500 350 500
Low Carbon Steel
3
P
4
Low Alloy Steel
5 330 250 330
Alloy Steel < 750 Rm [N/mm2]
Steel 6
7
High Alloy Steel
8 250 180 250
Alloy Steel > 750 Rm [N/mm2]
9
M
Stainless Steel
11 Stainless Steel
12 Stainless Steel
210 160 210
34
35 Aluminum Alloys
N(K)
Non-Ferrous
36 Aluminum Si > 12%
37
1600 1250 650
Metals
39 Copper and Copper Alloys
1150 800 500
40 Brass, Bronze
19
20 Titanium < 600 Rm [N/mm2] 200 130 160
S(M) 21 High Temperature Alloys and
Heat Resistant 22 Titanium Alloys
Material
23 Titanium > 900 Rm [N/mm2] 115 100 115
24
53
ST-Cut Nominal Feeds and Depth of Cut
The cutting conditions for Parting Off and Turning applications in the table below are recommended starting
points, which may be increased by up to 30%, depending on material properties, such as hardness and tensile
strength.
Vargus No.
P
4 .0197-.0394 .0012 .0020-.0472 .0017
Low Alloy Steel
5 .0472-.0709 .0024 .0472-.0984 .0033
Alloy Steel < 750 Rm [N/mm2]
Steel 6 .0787-.1181 .0039 .0984-.1575 .0055
7 .0197-.0394 .0008 .0020-.0472 .0011
High Alloy Steel
8 .0472-.0709 .0020 .0472-.0984 .0031
Alloy Steel > 750 Rm [N/mm2]
9 .0787-.1181 .0031 .0984-.1575 .0047
M
11 .0197-.0394 .0010 .0016-.0031 .0014
Stainless Steel .0472-.0709 .0014 .0031-.0591 .0019
Stainless Steel 12
.0787-.1181 .0024 .0591-.1181 .0033
34 .0197-.0394 .0024 .0020-.0472 .0033
Aluminum Alloys
35 .0472-.0709 .0047 .0472-.0984 .0071
N(K)
Non-Ferrous
36
37
Aluminum Si > 12%
.0787-.1181
.0197-.0394
.0071
.0024
.0591-.1181
.0020-.0472
.0099
.0033
Metals Copper and Copper Alloys
39 .0472-.0709 .0047 .0472-.0984 .0071
Brass, Bronze
40 .0787-.1181 .0071 .0984-.1575 .0099
19 .0197-.0394 .0008 .0016-.0031 .0011
Titanium < 600 Rm
20 .0472-.0709 .0016 .0031-.0591 .0022
S(M) 21 High Temperature Alloys and
Heat Resistant 22 Titanium Alloys
[N/mm2]
.0787-.1181
.0197-.0394
.0024
.0004
.0591-.1181
.0016-.0031
.0039
.0008
Material Titanium > 900 Rm
23 .0472-.0709 .0010 .0031-.0591 .0014
[N/mm2]
24 .0787-.1181 .0016 .0591-.1181 .0031
54
Inserts
Parting Off.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................. 56
Groove & Turn. . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............................................................................. 58
Square Grooving.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................. 59
Round Grooving.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................. 60
Threading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............................................................................. 61
6 - Grooving Width 7 - Thread Standard and Pitch (Threading) 8 - t max 9 - Corner Radius
.020 - .118” (0.5 - 3.0mm) 60 - Partial 60° 15 - .059” (1.5mm) 00 - 0.0mm
55 - Partial 55° 35 - .138” (3.5mm) 0.05 - .002” (0.05mm)
6 - Corner Radius for Round Grooving Inserts 50 - .197” (5.0mm)
.008 - .059” (0.2 - 1.5mm) 55 - .217” (5.5mm)
70 - .276” (7.0mm)
85 - .335” (8.5mm)
10 - Approach Angle (for Parting Off) 11 - Corner Lead Direction (Parting Off) 12 - Special Insert Structure 13 - Grade
00 - 0° R - Right Hand Direction E - Treated Cutting Edge VPG
06 - 6° L - Left Hand Direction W - Wiper VS020
15 - 15° None - Neutral Direction C - Chamfer
CW - Chamfer & Wiper
11 - Helix Side (Threading) RW - Radius & Wiper
RH - Right Hand Helix
LH - Left Hand Helix 12 - Threading
R - Close to Right Shoulder
L - Close to Left Shoulder
None - Neutral
55
PARTING OFF FRONT TURNING BACK TURNING LH INSERT
LH INSERT SQUARE GROOVE
TURN-GROOVE THREAD RHROUND
INSERT
RH INSERT
GROOVE
LH K-DIRECTION
LH K-DIRECTION RH K-DIRECTION
RH K-DIRECTION
Parting Off LH INSERT
LH INSERT RH INSERT
RH INSERT
56
PARTING OFF FRONT TURNING BACK TURNING LH INSERT
LH INSERTSQUARE GROOVE
TURN-GROOVE THREAD RH INSERT
RH INSERT
ROUND GROOVE
LH K-DIRECTION
LH K-DIRECTION RH K-DIRECTION
RH K-DIRECTION
Parting Off (con’t) LH INSERT
LH INSERT RH INSERT
RH INSERT
57
CK TURNING TURN-GROOVE SQUARE GROOVE THREAD ROUND GROOVE
t2 max. R R t2 max.
W W
t1 max. R R t1 max.
58
RN-GROOVE SQUARE GROOVE THREAD ROUND GROOVE
Square Grooving
LH INSERT RH INSERT
t max. R R t max.
W W
.335" max. R R .335" max.
(8.5mm) (8.5mm)
Round Grooving
LH INSERT
LH INSERT RH
RH INSERT
INSERT
LH Insert Rake Angle°
Rake Angle° RH Insert Rake
Rake Angle°
Angle°
tt max.
max. tt max.
max.
W
W W
W
.335"max.
max. RR RR
.335" max.
8.5 8.5 max.
(8.5mm) (8.5mm)
60
UARE GROOVE THREADING
THREAD ROUND GROOVE
Internal
60° L
External
Partial Profile 60° Right Hand Inserts
Ordering Code Dimensions Pitch Grade
W R t max Y No. of Rake Thread Profile
mm / TPI Helix ° VS020 VPG
inch mm inch mm inch mm inch mm Passes Angle Direction Side
ST85RTH4AA60RHR .039 1.00 0 0 .098 2.50 .006 0.15 0.075 - 0.25/508-100 3-4 4 6 RH R • •
ST85RTH4AA60RHL .039 1.00 0 0 .098 2.50 .006 0.15 0.075 - 0.25/508-100 3-4 4 6 RH L • •
ST85RTH4AB60RHR .059 1.50 .001 0.02 .177 4.50 .012 0.30 0.25 - 0.5/80-46 4-6 4 4 RH R • •
ST85RTH4AB60RHL .059 1.50 .001 0.02 .177 4.50 .012 0.30 0.25 - 0.5/80-46 4-6 4 4 RH L • •
ST85RTH4A60RHR .079 2.00 .002 0.05 .256 6.50 .033 0.85 0.5 - 1.5/46-16 4-10 4 2.5 RH R • •
ST85RTH4A60RHL .079 2.00 .002 0.05 .256 6.50 .033 0.85 0.5 - 1.5/46-16 4-10 4 2.5 RH L • •
ST85RTH4G60RH .126 3.20 .008 0.20 .335 8.50 .063 1.60 1.75 - 3.0/14-8 5-14 4 1.5 RH N • •
| • In stock ° Available upon request
61
RE GROOVE THREAD ROUND GROOVE
Internal
55° L
External
62
External Tools
5 - Shank Size / Diameter 6 - Max Radial Depth 7 - Radial Depth Depth (Stepped Toolholders) 8 - Coolant
375 - .375x.375” 85 - Max Radial Depth .355” (8.5mm) None - Non Stepped Shank None - No coolant
500 - .500x.500” Close to Main Spindel T30Close to Main
- Limit Depth Spindel
of Step 1.181” (30mm) CloseC to Sub Spindel
- Coolant Close to Su
625 - .625x.625” STR90L..-85 (RH Inserts) T40STR90L..-85
- Limit Depth of(RH
StepInserts)
1.575” (40mm) STR90R..-85 (LH Inserts) STR90R..-85
750 - .750x.750”
L2 L2 L2
0810 - .315”x.394” (8x10mm)
1010 - .394”x.394” (10x10mm)
1212 - .472”x.472” (12x12mm)
1616 - .630”x.630” (16x16mm)
2020 - .787”x.787” (20x20mm)
10 - Ø.394” (10mm)
63
Square Shank Tools
Ø 17mm
.669" (17mm)
max max
H H
6
L
HxB
L Screw Key Torque Limiting Adapter*
Inch mm
STER0810-85 .315x.394 8x10 4.331
STER1010-85 .394x.394 10x10 4.331
SM5x0.8x9-T10 LH
85 STER1212-85 .472x.472 12x12 4.724 K3T D02-12-3.0Nm
Torque Limit: 3.0Nm
STER1616-85 .630x.630 16x16 4.724
STER2020-85 .787x.787 20x20 4.724
HxB
L Screw Key Torque Limiting Adapter*
Inch mm
STEL0810-85 .315x.394 8x10 4.331
STEL1010-85 .394x.394 10x10 4.331
SM5x0.8x9-T10 LH
85 STEL1212-85 .472x.472 12x12 4.724 K3T D02-12-3.0Nm
Torque Limit: 3.0Nm
STEL1616-85 .630x.630 16x16 4.724
STEL2020-85 .787x.787 20x20 4.724
| * Item sold separately. See page 63 for more details.
| ** Available upon request.
64
Stepped Square Shank Tools
ØØ.669"
17mm (17mm)
max max
H H
6
L
L1
7.5 B
HxB L1
L Screw Key Torque Limiting Adapter*
Inch mm Inch mm
STESR0810-85T30 .315x.394 8x10 4.331 1.181 30
SM5x0.8x9-T10
STESR1010-85T30 .394x.394 10x10 4.331 1.181 30 LH
85 K3T D02-12-3.0Nm
STESR1212-85T40 .472x.472 12x12 4.724 1.575 40 Torque Limit:
3.0Nm
STESR1616-85T40 .630x.630 16x16 4.724 1.575 40
HxB L1
L Screw Key Torque Limiting Adapter*
Inch mm Inch mm
STESL0810-85T30 .315x.394 8x10 4.331 1.181 30
SM5x0.8x9-T10
STEL1010-85T30 .394x.394 10x10 4.331 1.181 30 LH
85 K3T D02-12-3.0Nm
STEL1212-85T40 .472x.472 12x12 4.724 1.575 40 Torque Limit:
3.0Nm
STEL1616-85T40 .630x.630 16x16 4.724 1.575 40
| * Item sold separately. See page 63 for more details.
65
Stepped Square Shank Tools (con’t)
Ø 17mm max
Ø .669" (17mm)max
Ø 17mm max
H H
H 6 H
L
6
L
7.5
B
7.5
B
L1
H H
6.2
B
B1
HxB
L B1 Screw Key Torque Limiting Adapter*
Inch mm
STE90R1010-85 .394x.394 10x10 4.331 .720 SM5x0.8x9-T10
85 K3T D02-12-3.0Nm
STE90R1212-85 .472x.472 12x12 4.724 .720 Torque Limit: 3.0Nm
| * Item sold separately. See page 63 for more details.
66
EX TERNAL GR OOVE T U R NING | FI NI S H I NG
GrooVical
Precise Grooving & Turning Applications
GrooVical
Precise Grooving & Turning Applications
Versatile Range of Indexable Grooving Inserts
The Groovical family of products by Groovex offers improved solutions for precise grooving and turning applications.
GVN26 and GV29/GVN29 feature inserts with three cutting corners and a unique rigid clamping system for improved
productivity.
The GVN style inserts offer new applications in the Groovical line, including turning and grooving chip forming
inserts for short helical chips, super positive grooving inserts, new parting off inserts, all desgined to machine close
to shoulder.
GVN26 Ø1.024”
GVN29
(26mm) Ø1.130”
t max
(28.7mm)
t max
Additional
Corner
Support
t max = Groove Depths w t max = Groove Depths
w
up to .236” (6.0mm) up to .266” (6.5mm) w
W = Groove Widths from W = Groove Widths from
.020” - .098” (0.5-2.5mm) .079” - .25” (2-6.35mm)
Applications:
68
Groovical Technical Data
Recommended Grades and Cutting Data
Vargus No.
Vc [m/min]
Material Hardness
Material Coated Uncoated
Group Brinell HB
VKX VN020
1 Low Carbon (C=0.1-0.25%) 125 459-656
2 Unalloyed Steel Medium Carbon (C=0.25-0.55%) 150 394-591
3 High Carbon (C=0.55-0.85%) 170 361-591
4 Non Hardened 180 328-508
P
Low Alloy Steel
5 Hardened 275 361-591
(alloying elements≤5%)
Steel 6 Hardened 350 262-443
7 High Alloy Steel Annealed 200 230-377
8 (alloying elements>5%) Hardened 325 164-328
9 Low Alloy (alloying elements <5%) 200 98-164
Cast Steel
10 High Alloy (alloying elements >5%) 225 66-131
11 Stainless Steel Non Hardened 200 230-394
12 Ferritic Hardened 330 197-312
13 Stainless Steel Austenitic 180 230-394
M
Stainless
14 Austenitic
15 Stainless Steel
Super Austenitic
Non Hardened
200
200
131-295
262-361
Steel
16 Cast Ferritic Hardened 330 213-361
17 Stainless Steel Austenitic 200 279-328
18 Cast Austenitic Hardened 330 197-328
28 Malleable Ferritic (short chips) 130 230-394
29 Cast Iron Pearlitic (long chips) 230 230-394
K
Cast Iron
30
31
Grey Cast Iron
Low Tensile Strength
High Tensile Strength
180
260
230-394
197-328
32 Ferritic 160 164-262
Nodular Sg Iron
33 Pearlitic 260 197-295
34 Aluminium Alloys Non Aging 60 328-787 1640-3937
35 Wrought Aged 100 262-558 459-1969
N(K)
Non-Ferrous
36
37
Aluminium Alloys
Cast
Cast & Aged
75
90
328-492
262-394
1640-3281
984-1969
Metals 38 Aluminium Alloys Cast Si 13-22% 130 328-492 984-1312
39 Copper and Brass 90 262-656 984-1640
40 Copper Alloys Bronze And Non Leaded Copper 100 262-656 984-1312
19 Annealed (iron based) 200 148-197
S(M)
Heat
20 High Temperature
21 Alloys
Aged (iron based)
Annealed (nickel or cobalt based)
280
250
115-164
66-098
Resistant 22 Aged (nickel or cobalt based) 350 49-082
Material 23 Pure 99.5 Ti 400Rm 459-558
Titanium Alloys
24 α+β Alloys 1050Rm 164-230
H(K)
Hardened
25
Extra Hard Steel Hardened & Tempered
45-50HRC 148-197
| The maximum recommended feed rate is one-tenth of the insert width (W).
| The minimum recommended depth of cut is twice the corner radius (r).
| The above recommendations are for achieving a stable and recurring tool life.
| Exceeding higher feed rates may cause excessive wear and breakage.
D max Limitations
GVN26 External - Depth of Groove in Relation to Workpiece Dia.
t max
70
GrooVical Inserts
71
Close to Shoulder Super Positive Rake Grooving (SP)
Ø26
Ø28.7
t max
t max
W R
| Right hand shown W R
72
Ø
Close to Shoulder Square Turning & Grooving Chip Former
Ø26
Ø28.7
t max
t max
W R
| Right hand shown W R
t max
73
Close to Shoulder Square Grooving
Ø26 Ø28.7
t max t max
W R W R
| Right hand shown
Ø26 Ø28.7
t max t max
W R W R
| Right hand shown
75
Close to Shoulder Round Grooving
Ø26 Ø28.7
t max W t-max.
W R R
| Right hand shown
76
Close to Shoulder Parting Off
K
GVNR...R
K
R tRmax
t max R R t max t max
K
W W W W
K K GVNR...L K K
| Right hand shown (R...R)
77
Close to Shoulder Parting Off (con’t)
K
GVNR...R
K
R tRmax
t max R R t max t max
K
W W W W
K K GVNR...L K K
| Right hand shown (R...R)
78
Square Grooving (GV29)
Ø28.7
t max
W R
| Right hand shown
79
Round Grooving (GV29)
Ø28.7
W t max
R
| Right hand shown
80
GrooVical Holders
81
GrooVical Holders - Ordering Code System
Square Holders
GVN E R 075 - 29 - 1
1 2 3 4 5 7
Modules
GVN A R 29 - T6.5 -
1 2 3 5 6
5 - Insert Size 6 - t max (for Modules Only) 7 - Insert Width (for GVN29 & GV29) 8 - Coolant
26 - 1.024” (26mm) T5.5 - .217” (5.5mm) 1 - .098” - .138” (2.5 - 3.5mm) C - Coolant (for Modular system)
29 - 1.130” (28.7mm) T6.5 - .256” (6.5mm) 2 - .142” - .217” (3.6 - 5.5mm)
Square Bodies
VBM R 100 - 90 - C
1 2 3 4 5
V-CAP Bodies
VBM R C5 - 90 - C
1 2 3 4 5
82
Close to Shoulder External Toolholders
t max
t max t max
H
H1 H H
H2
H1 H1L2 H2
L1 H2
L2
L2 L1
B1 L1
B1
F B
GVN26 B1
F B
t max
t max
F B
H1 H1 H H
H2 H2
B2 L2
B2 L2 L1
L2 B1 L1
L2 B1
F B
| Right hand shown F B
GVN29
Spare Parts
H=B Insert
RH/LH L1 H1 L2 H2 F B1 B2 t max/ D max Torx Key
Inch mm Screw*
GVNER/L10-26 .394 10.0 4.921 .394 1.102 .335 .402 .244 -
GVNER/L12-26 .472 12.0 4.921 .472 1.102 .256 .480 .165
26 GVNER/L16-26 .630 16.0 4.921 .630 1.102 .098 .638 -
GVNER/L20-26 .787 20.0 4.921 .787 1.102 - .795 -
GVNER/L25-26 .984 25.0 5.906 .984 1.102 - .992 -
GVNER/L12-29-1 .472 12.0 3.937 .472 1.004 .630 .492 .157 .069
See page
GVNER/L12-29-2 .472 12.0 3.937 .472 1.004 .630 .492 .157 .108 SGM5 L20IP
70
GVNER/L16-29-1 .630 16.0 4.921 .630 .913 .472 .650 - .069
GVNER/L16-29-2 .630 16.0 4.921 .630 .913 .472 .650 - .108
29
GVNER/L20-29-1 .787 20.0 4.921 .787 .823 .315 .807 - .069
GVNER/L20-29-2 .787 20.0 4.921 .787 .823 .315 .807 - .108
GVNER/L25-29-1 .984 25.0 5.906 .984 .709 .118 1.004 - .069
GVNER/L25-29-2 .984 25.0 5.906 .984 .709 .118 1.004 - .108
* Tightening Torque 4.5 Nm
83
Close to Shoulder External Toolholders 90°
H1 H
t max H1 H
t max
F B
F B
L2
GVN26 L2 L1
t max L1 H
t max H
B2 H2
B2 H2
L2 L1
L2 L1
B B
F F
| Right hand shown GVN29
L2 L2
Spare Parts
H=B
RH/LH L1 H1 L2 B2 H2 F t max/D max Insert Screw* Torx Key
Inch mm
GVNE90R/L20-26 .787 20.0 4.921 .787 .787 - - 1.122
26
GVNE90R/L25-26 .984 25.0 5.906 .984 .787 - - 1.319
GVNE90R/L20-29-1 .787 20.0 4.921 .787 .795 .069 .315 1.102 See page
SGM5 L20IP
GVNE90R/L20-29-2 .787 20.0 4.921 .787 .795 .108 .315 1.102 70
29
GVNE90R/L25-29-1 .984 25.0 5.906 .984 .984 .069 .118 1.299
GVNE90R/L25-29-2 .984 25.0 5.906 .984 .984 .108 .118 1.299
* Tightening Torque 4.5 Nm | For LH90° work applications use LH toolholder with RH insert and vice versa.
E - RH E - RH
GrooVical Modules
GVN26 GVN29
D max D max
t max t max
H1 H1
B2
F
F
GVN26 GVN29
t max
RH/LH L1 H1 F B2 D max Insert Screw* Torx Key
Inch mm
26 GVNAR/L26-T5.5C 1.969 1.260 .612 - .217 5.5
GVNAR/L29-T6.5-1C 1.969 1.260 .561 .069 .256 6.5 See page 70 SGM5 L20IP
29
GVNAR/L29-T6.5-2C 1.969 1.260 .561 .108 .256 6.5
* Tightening Torque: 4.5 Nm max.
85
Modular Bodies with High Pressure Coolant
for Grooving, Face Grooving, Parting Off and Turning | I N C H
L2 Coolant Inlet
G1/8"
H2 H1 H
h
L1
F B
L2
Coolant Inlet
G1/8"
H2 H
H1
h
L1
B
90°
Necessary Parts When Using Modules with High Pressure Coolant Thru:
1. Tube Connector 25-6P (x1)
2. Fittings (x2): Straight Fitting G1_8x6P or Angled Fitting G1_8x6P
The above items are not included and should be ordered separately. For more information please see page 21.
86
Modular Bodies with High Pressure Coolant
for Grooving, Face Grooving, Parting Off and Turning | M E T R I C
L2 Coolant Inlet
G1/8"
H2 H1 H
h
L1
F B
L2
Coolant Inlet
G1/8"
H2 H
H1
h
L1
B
90°
Necessary Parts When Using Modules with High Pressure Coolant Thru:
1. Tube Connector 25-6P (x1)
2. Fittings (x2): Straight Fitting G1_8x6P or Angled Fitting G1_8x6P
The above items are not included and should be ordered separately. For more information please see page 21.
87
Modular V-CAP Holders with HPC
H1
L1
12.9mm L
D
H1
L2
L1
L
B2
B1
88
External Toolholders (GV29)
t max
t max
H
H
H1
H1 H2
H2
B2 L2
B2 L2 L1
L2 B1 L1
L2 B1
F B
| Right hand shown
F B
89
External Toolholders 90° (GV29)
L3
L3
t max
t max
H1
H1 HH
B2 H2
H2
B2
L1
L1
F B
F B
L2 H2
| Right hand shown
L2 H2
90
EX TERNAL GR OOVE T U R NING | FI NI S H I NG
Laydown Grooving
For Shallow Grooves
Technical Data
Recommended Grades, Cutting Speeds Vc [ft/min] and Feed f [inch/rev]
Vc [ft/min]
Vargus No.
Material Hardness Feed
Material Coated
Group Brinell HB [inch/rev]
VTX VKX
1 Low carbon (C=.1-.25%) 125 459 - 656 459 - 656 .0118
2 Unalloyed steel Medium carbon (C=.25-.55%) 150 393 - 590 393 - 590 .0059
3 High Carbon (C=.55-.85%) 170 361 - 590 361 - 590 .002
4 Non hardened 180 328 - 508 328 - 508 .0098
P
Low alloy steel
5 Hardened 275 295 - 475 295 - 475 .0039
(alloying elements ≤ 5%)
Steel 6 Hardened 350 262 - 443 262 - 443 .002
7 High alloy steel Annealed 200 229 - 377 213 - 377 .0079
8 (alloying elements >5%) Hardened 325 164 - 328 164 - 328 .002
9 Low alloy (alloying elements <5%) 200 98 - 164 98 - 164 .0079
Cast steel
10 High alloy (alloying elements >5%) 225 66 - 131 82 - 131 .002
11 Stainless steel Non hardened 200 229 - 393 262 - 393 .0079
12 Feritic Hardened 330 197 - 311 180 - 311 .002
M
13 Stainless steel Austenitic 180 229 - 328 197 - 328 .0079
14 Austenitic Super Austenitic 200 131 - 295 164 - 295 .002
Stainless 15 Stainless steel Non hardened 200 262 - 361 197 - 262 .0079
Steel 16 Cast feritic Hardened 330 213 - 361 148 - 213 .002
17 Cast austenitic Austenitic 200 279 - 328 164 - 229 .0079
18 Hardened 330 197 - 328 131 - 197 .002
28 Ferritic (short chips) 130 229 - 393 197 - 262 .0079
Malleable Cast iron
29 Pearlitic (long chips) 230 229 - 393 197 - 262 .0059
K 30
Cast Iron 31
Grey cast iron
Low tensile strength
High tensile strength
180
260
229 - 393
197 - 328
197 - 262
131 - 229
.0079
.0039
32 Feritic 160 164 - 262 197 - 262 .0079
Nodular SG iron
33 Pearlitic 260 197 - 295 229 - 295 .0039
34 Aluminium alloys Non aging 60 328 - 787 262 - 787 .0157
35 Wrought Aged 100 262 - 557 328 - 557 .0039
N(K) 36
37
Aluminium alloys
Cast
Cast & aged
75
90
328 - 492
262 - 393
328 - 492
197 - 328
.0098
.0059
Non-Ferrous 38 Aluminium alloys Cast Si 13-22% 130 328 - 492 328 - 492 .0059
Metals
39 Copper and Brass 90 262 - 656 262 - 656 .0079
40 copper alloys Bronze and non leaded copper 100 262 - 656 262 - 656 .0059
19 Annealed (Iron based) 200 148 - 197 82 - 148 .0079
S(M) 20
21
High temperature
alloys
Aged (Iron based)
Annealed (Nickel or Cobalt based)
280
250
115 - 164
66 - 98
66 - 98
49 - 66
.002
.002
Heat 22 Aged (Nickel or Cobalt based) 350 49 - 82 33 - 49 .002
Resistant 23 Pure 99.5 Ti 400Rm 459 - 557 197 - 328 .0039
Material Titanium alloys
24 α+β alloys 1050Rm 164 - 229 131 - 164 .002
H(K) 25
Extra hard steel Hardened & tempered
45-50HRc 148 - 197 66 - 131 .0008
92
Laydown Grooving Inserts
4 - Groove Std. Width 5 - Profile Style 6 - Groove Standard 7 - Groove Depth 8 - Carbide Grade
.03 - .08 " C - Full Profile DIN 471 Partial .013 - .079" VTX
DIN 471 VKX
DIN 7993 Partial
DIN 7993
DIN 76 ST, DIN 76 SH
CIR - CIRCLIP
93
DIN 471 Retaining Ring Grooves for Shafts
W W t1
t W t1 t
W
t 45°
t
d1 45°
d1
IC
IC
IC
IC
m
m
Standard Standard
(Partial Profile) (Full Profile)
94
DIN 7993 Snap Ring Grooves
W
R
W t
R
t
IC
R
IC
R
Standard
(Partial Profile)
W
W
t
t
IC
IC
Standard
(Partial Profile)
95
DIN 76 Thread Undercuts (For ISO Metric Threads in Accordance with DIN 13)
R g1 R t1 R g1 R t1
t
R R R t1 R R t1
30° min g1 g1
t
R
30° min
45° 45°
CI
CI
R 45° 45°
CI
CI
g2
R
g2 Short - Type B
Normal - Type A
96
Laydown Grooving Holders
External Toolholders
A L 050 - 4
1 2 3 4 5 6
1- Anvil 2 - Holder Style 3 - Shank Square [inch] 4 - Insert Size 5 - Clamping 6 - RH/LH Holder
A - Anvil required L - External 0375, 050, 0625, 075, 3 - IC3/8" C - With Clamp None - Right Hand
N - No Anvil required 100, 125, 150, 200 5 - IC5/8" LH - Left Hand
97
External Toolholders
H1 H1 H H
F F B B
L2
L2
L1
L1
98
External Toolholders
H1 H
H1 H
F B
F B
L2
L2 L1
L1
99
INTERNAL
GROOVE TURNING
Semi Finishing
VG-Cut .. . . .................................................................................................................... 103
Finishing
GrooVical ............................................................................................................... 111
Laydown Grooving .. ........................................................................... 117
Mini-V.. . . . . . .................................................................................................................... 129
micrOscope.................................................................................................... 157
I NTERNAL GR OOVE T U R NING | S E M I FI NI S H I NG
VG-Cut
Internal Grooving & Turning Applications
Tech Guide
Recommended Cutting Speeds Vc [m/min] for Grooving and Turning
Vc [ft/min] Vc [m/min]
Vargus No.
Material
Group
Material
Hardness VMG
Brinell HB PVD M35
VPG VKG for Boring
PVD P20 CVD K25
P
Low Alloy Steel
5 Hardened 275 160-400 200-490 200-590
(alloying elements≤5%)
Steel 6 Hardened 350 130-230 160-330 200-525 Reduce speed by ≈ 30%
7 High Alloy Steel Annealed 200 160-330 300-490 300-820 for improved chip
8 (alloying elements>5%) Hardened 325 130-230 160-330 200-525 forming and evacuation.
9 Low Alloy (alloying elements <5%) 200 50-100 300-490 300-820
Cast Steel
10 High Alloy (alloying elements >5%) 225 160-330 200-525 200-590
11 Stainless Steel Non Hardened 200 160-260 200-525
12 Ferritic Hardened 330 130-260 160-460
13 Stainless Steel Austenitic 180 160-260 200-525
M
Stainless
14 Austenitic
15 Stainless Steel
Super Austenitic
Non Hardened
200
200
160-260
160-260
200-525
200-525
Steel
16 Cast Ferritic Hardened 330 130-260 160-460
17 Stainless Steel Austenitic 200 160-260 200-525
18 Cast Austenitic Hardened 330 130-260 160-460
28 Malleable Ferritic (short chips) 130 525-660 525-920
29 Cast Iron Pearlitic (long chips) 230 460-720 460-850
K
Cast Iron
30
31
Grey Cast Iron
Low Tensile Strength
High Tensile Strength
180
260
525-660
330-660
525-920
330-780
32 Ferritic 160 330-660 330-780
Nodular Sg Iron
33 Pearlitic 260 330-660 330-780
34 Aluminium Alloys Non Aging 60 490-980 660-1450
35 Wrought Aged 100 490-820 660-1150
N(K)
Non-Ferrous
36
37
Aluminium Alloys
Cast
Cast & Aged
75
90
490-980 660-1450
490-980 660-1450
Metals 38 Aluminium Alloys Cast Si 13-22% 130 490-820 660-1150
39 Copper and Brass 90 490-980 660-1450
40 Copper Alloys Bronze And Non Leaded Copper 100 490-980 660-1450
19 Annealed (iron based) 200 65-40 100-160
S(M)
20 High Temperature Aged (iron based) 280 65-115 65-160
21 Alloys Annealed (nickel or cobalt based) 250 65-115 65-160
For gummy materials,
Heat such as stainless steel
Resistant 22 Aged (nickel or cobalt based) 350 65-115 65-160
Material
and heat resistant
23 Pure 99.5 Ti 400Rm 80-130 100-160
Titanium Alloys metals or in case of
24 α+β Alloys 1050Rm 65-160 65-160
build up on edge (cold
H(K)
Hardened
25
Extra Hard Steel Hardened & Tempered
45-50HRc 65-130 100-160 welding), increase
speed by ≈ 20%.
26 51-55HRc 50-100 80-150
Material
104
Feed Rate (f) Starting Point for Boring
f [in/rev] .079" (2mm) Insert Width f [in/rev] .118" (3mm) Insert Width
.012 .012
.010 .010
.008 .008
.006 .006 GP
GT
.004 .004
GM
.002 GP .002
GT GM2
GF
.000 .000
Chip Former GF GT GP Chip Former GM2 GM GT GP
f [in/rev] .002 .003 .004 f [in/rev] .003 .005 .006 .007
f [in/rev] .157" (4mm) Insert Width f [in/rev] .197" (5mm) Insert Width
.012 .012
GP
.010 GP .010
GT GT
.008 .008
GM GT2
.006 .006
.004 .004
.002 .002
.000 .000
Chip Former GM GT GP Chip Former GT2 GT GP
f [in/rev] .006 .007 .009 f [in/rev] .006 .008 .010
105
Feed Rate (f) and Depth of Cut for Boring and
Internal Profiling
ap [in] .079" (2mm) Width GT & GR ap [in] .118" (3mm) Width GT & GR
.036 .071
.031 .063
.028 .055
.024 .047
.020 GT GR
.039
GT
.016 .031
.012 GR .024
.008 .016
.004 .008
0 0
0 .002 .004 .006 .008 0 .004 .008 .012 .016 .020 .024 .028
f [in/rev] f [in/rev]
Recommended Starting Point: Recommended Starting Point:
GT .079" GR .079" GT .118" GR .118"
ap [in] .020 .020 ap [in] .047 .039
f [in/rev] .002 .003 f [in/rev] .006 .010
ap [in] .157" (4mm) Width GT & GR ap [in] .197" (5mm) Width GT & GR
.118 .138
.098 .118
.098
.079
GM GT
.079
.059
.059
GT GR GR
.039
.039
.020 .020
0 0
0 .004 .008 .012 .016 .020 .024 .028 0 .004 .008 .012 .016 .020 .024 .028
f [in/rev] f [in/rev]
Recommended Starting Point: Recommended Starting Point:
GT .157" GR .157" GT2 .197” GT .197" GR .197"
ap [in] .059 .063 ap [in] .079 .079 .079
f [in/rev] .007 .012 f [in/rev] .006 .008 .013
.118
.098
GT GR
.079
.059
.039
.020
0
0 .004 .008 .012 .016 .020 .024 .028
Recommended Starting Point: f [in/rev]
GT .236" GR .236”
ap [in] .098 .098
f [in/rev] .009 .014
106
VG-Cut Internal Tools
Internal VG-Cut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................. 108
VG I R 100 3 C
1 2 3 4 5 6
107
Internal VG-Cut | I N C H
L1
L L
L1 L1 D min
D min
D min
d d
F F
F
PW
L1
t max
L1
L
Spare Parts
108
t max
Internal VG-Cut | M E T R I C
Figure A L1
L L L D min
D min D min
L 1L 1 L1
d d d
F F F
t max
t max t max
t max
PWPW PW
Figure B L1
L L
L1 L1 D min
D min
D min
d d
F F
PW t max PW t max
t max
F
PW
Figure A - Dimension L1 no longer limits machining on the axial plane Spare Parts
L1
t max
Ordering Code Dimensions Inch
L1
D min d
RH/LH PW t max L1 F L Screw* Key
Inch mm Inch mm
L
VGIR/L-20-24-2C .295 1.575 .945 24.0 .787 20.0 .689 7.087 SM5x12
.079" (2.0mm)
VGIR/L25-31-2C .374 1.969 1.220 31.0 .984 25.0 .866 7.874 SM5X14
VGIR/L-20-24-3C .295 1.575 .945 24.0 .787 20.0 .689 7.087 SM5x12
VGIR/L-25-31-3C .118" (3.0mm) .374 1.969 1.220 31.0 .984 25.0 .866 7.874
SM5X14
t max
VGIR/L-32-39-3C .453 2.480 1.535 39.0 1.260 32.0 1.083 9.843
VGIR/L-20-27-4C .374 1.614 1.063 27.0 .787 20.0 .768 7.087 SM5x12 K4H
VGIR/L-25-31-4C .157" (4.0mm) .374 1.969 1.220 31.0 .984 25.0 .866 7.874
VGIR/L-32-39-4C .453 2.480 1.535 39.0 1.260 32.0 1.083 9.843 SM5X14
VGIR-32-39-5C .197" (5.0mm) .453 2.480 1.535 39.0 1.260 32.0 1.083 9.843
VGIR-40-49-6C .453 3.150 1.929 49.0 1.575 40.0 1.201 11.811
.236" (6.0mm) SM5X20
VGIR-40-50-6C .453 3.150 1.969 50.0 1.575 40.0 1.201 11.811
* Tightening Torque: For 2 PW holders - 4 Nm max.; For 3-6 PW holders - 7 Nm max.
d
109
I NTERNAL GR OOVE T U R NING | FI NI S H I NG
GrooVical
Precise Grooving & Turning Applications
Technical Guide
Recommended Grades and Cutting Data
Vargus No.
Vc [ft/min]
Material Hardness
Material Coated Uncoated
Group Brinell HB
VKX VN020
1 Low Carbon (C=0.1-0.25%) 125 459-656
2 Unalloyed Steel Medium Carbon (C=0.25-0.55%) 150 394-591
3 High Carbon (C=0.55-0.85%) 170 361-591
4 Non Hardened 180 328-508
P
Low Alloy Steel
5 Hardened 275 361-591
(alloying elements≤5%)
Steel 6 Hardened 350 262-443
7 High Alloy Steel Annealed 200 230-377
8 (alloying elements>5%) Hardened 325 164-328
9 Low Alloy (alloying elements <5%) 200 098-164
Cast Steel
10 High Alloy (alloying elements >5%) 225 66-131
11 Stainless Steel Non Hardened 200 230-394
12 Ferritic Hardened 330 197-312
13 Stainless Steel Austenitic 180 230-394
M
Stainless
14 Austenitic
15 Stainless Steel
Super Austenitic
Non Hardened
200
200
131-295
262-361
Steel
16 Cast Ferritic Hardened 330 213-361
17 Stainless Steel Austenitic 200 279-328
18 Cast Austenitic Hardened 330 197-328
28 Malleable Ferritic (short chips) 130 230-394
29 Cast Iron Pearlitic (long chips) 230 230-394
K
Cast Iron
30
31
Grey Cast Iron
Low Tensile Strength
High Tensile Strength
180
260
230-394
197-328
32 Ferritic 160 164-262
Nodular Sg Iron
33 Pearlitic 260 197-295
34 Aluminium Alloys Non Aging 60 328-787 1640-3937
35 Wrought Aged 100 262-558 459-1969
N(K)
Non-Ferrous
36
37
Aluminium Alloys
Cast
Cast & Aged
75
90
328-492
262-394
1640-3281
984-1969
Metals 38 Aluminium Alloys Cast Si 13-22% 130 328-492 984-1312
39 Copper and Brass 90 262-656 984-1640
40 Copper Alloys Bronze And Non Leaded Copper 100 262-656 984-1312
19 Annealed (iron based) 200 148-197
S(M)
Heat
20 High Temperature
21 Alloys
Aged (iron based)
Annealed (nickel or cobalt based)
280
250
115-164
66-98
Resistant 22 Aged (nickel or cobalt based) 350 049-082
Material 23 Pure 99.5 Ti 400Rm 459-558
Titanium Alloys
24 α+β Alloys 1050Rm 164-230
H(K)
Hardened
25
Extra Hard Steel Hardened & Tempered
45-50HRC 148-197
| The maximum recommended feed rate is one-tenth of the insert width (W).
| The minimum recommended depth of cut is twice the corner radius (r).
112
Recommended Feed Rate for Grooving & Turning Finishing
Operations
High Alloy Steel, Austenitic Stainless Steel,
330 HB, 2100 Kc [Nin²] 200 HB, 2600 Kc [NIn²]
Insert Width (Inch) Depth ap = Insert Width x variable Average f Inch/rev Depth ap = Insert Width x variable Average f inch/rev
.016"-.035" (0.4-0.9mm) .0022 .0016 .0014 .0008
.039"-.059" (1.0-1.5mm) .0022 .0028 .0014 .0016
.063"-.079" (1.6-2.0mm) .0024 .0043 .0016 .0028
.083"-.098" (2.1-2.5mm) .0024 .0055 .0016 .0035
.102"-.118" (2.6-3.0mm) .0024 .0067 .0016 .0043
.122"-.157" (3.1-4.0mm) .0024 .0083 .0016 .0055
.161"-.216" (4.1-5.5mm) .0024 .0110 .0016 .0075
| The above recommendations are for achieving a stable and recurring tool life.
| Exceeding higher feed rates may cause excessive wear and breakage.
D max Limitations
GV29 / GVN29 Internal - Depth of Groove in Relation to Bore Dia.
Dimensions Inch
t max D min
.020 1.652
.039 1.704
.059 1.759
.079 1.816 D t max
.098 1.876
.118 1.940
.138 2.006
.157 2.076
.177 2.152
.197 2.228
.217 2.317
D min
.236 2.924
.256 4.103
113
GrooVical Holders
Close to Shoulder Internal Toolholders (GVN29).................................................................... 115
Internal Toolholders (GV29).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 115
| For LH Internal work applications use LH toolholder with RH insert and vice versa.
RH Insert I - LH
E - RH
GV29 / GVN29
114
Close to Shoulder Internal Toolholders (GVN29)
with Coolant
t max
D t max
D
A
A
H1 L2
H1 L2
L1 L1
B B
Right hand shown F F
D
RH/LH L1 L2 A B H1 F t max/D min Insert Screw* Torx Key
Inch mm
GVNIR/L25-29 .984 25.0 7.874 .748 .890 .937 .445 .748 See page
29 SGM5 L20IP
GVNIR/L32-29 1.260 32.0 9.843 .748 1.142 1.201 .571 .874 70
| For suitable GVN29 inserts, please see page 71.
* Tightening Torque 4.5 Nm.
B
F B
L3
F
Right hand shown L3
D
RH/LH L1 L2 L2 A B H1 F t max/D min Insert Screw* Torx Key
Inch mm
GVIR25-29 .984 25.0 7.874 .748 .228 .890 .937 .445 .748 See page
29 SGM5 L20IP
GVIR32-29 1.260 32.0 9.843 .748 .228 1.142 1.201 .571 .874 70
| For suitable GVN29 inserts, please see page 71.
* Tightening Torque 4.5 Nm.
115
I NTERNAL GR OOVE T U R NING | FI NI S H I NG
Laydown Grooving
For Shallow Grooves
Technical Data
Recommended Grades, Cutting Speeds Vc [ft/min] and Feed f [inch/rev]
Vc [ft/min]
Vargus No.
Material Hardness Feed
Material Coated
Group Brinell HB [inch/rev]
VTX VKX
1 Low carbon (C=.1-.25%) 125 459 - 656 459 - 656 .0118
2 Unalloyed steel Medium carbon (C=.25-.55%) 150 393 - 590 393 - 590 .0059
3 High Carbon (C=.55-.85%) 170 361 - 590 361 - 590 .002
4 Non hardened 180 328 - 508 328 - 508 .0098
P
Low alloy steel
5 Hardened 275 295 - 475 295 - 475 .0039
(alloying elements ≤ 5%)
Steel 6 Hardened 350 262 - 443 262 - 443 .002
7 High alloy steel Annealed 200 229 - 377 213 - 377 .0079
8 (alloying elements >5%) Hardened 325 164 - 328 164 - 328 .002
9 Low alloy (alloying elements <5%) 200 98 - 164 98 - 164 .0079
Cast steel
10 High alloy (alloying elements >5%) 225 66 - 131 82 - 131 .002
11 Stainless steel Non hardened 200 229 - 393 262 - 393 .0079
12 Feritic Hardened 330 197 - 311 180 - 311 .002
M
13 Stainless steel Austenitic 180 229 - 328 197 - 328 .0079
14 Austenitic Super Austenitic 200 131 - 295 164 - 295 .002
Stainless 15 Stainless steel Non hardened 200 262 - 361 197 - 262 .0079
Steel 16 Cast feritic Hardened 330 213 - 361 148 - 213 .002
17 Cast austenitic Austenitic 200 279 - 328 164 - 229 .0079
18 Hardened 330 197 - 328 131 - 197 .002
28 Ferritic (short chips) 130 229 - 393 197 - 262 .0079
Malleable Cast iron
29 Pearlitic (long chips) 230 229 - 393 197 - 262 .0059
K 30
Cast Iron 31
Grey cast iron
Low tensile strength
High tensile strength
180
260
229 - 393
197 - 328
197 - 262
131 - 229
.0079
.0039
32 Feritic 160 164 - 262 197 - 262 .0079
Nodular SG iron
33 Pearlitic 260 197 - 295 229 - 295 .0039
34 Aluminium alloys Non aging 60 328 - 787 262 - 787 .0157
35 Wrought Aged 100 262 - 557 328 - 557 .0039
N(K) 36
37
Aluminium alloys
Cast
Cast & aged
75
90
328 - 492
262 - 393
328 - 492
197 - 328
.0098
.0059
Non-Ferrous 38 Aluminium alloys Cast Si 13-22% 130 328 - 492 328 - 492 .0059
Metals
39 Copper and Brass 90 262 - 656 262 - 656 .0079
40 copper alloys Bronze and non leaded copper 100 262 - 656 262 - 656 .0059
19 Annealed (Iron based) 200 148 - 197 82 - 148 .0079
S(M) 20
21
High temperature
alloys
Aged (Iron based)
Annealed (Nickel or Cobalt based)
280
250
115 - 164
66 - 98
66 - 98
49 - 66
.002
.002
Heat 22 Aged (Nickel or Cobalt based) 350 49 - 82 33 - 49 .002
Resistant 23 Pure 99.5 Ti 400Rm 459 - 557 197 - 328 .0039
Material Titanium alloys
24 α+β alloys 1050Rm 164 - 229 131 - 164 .002
H(K) 25
Extra hard steel Hardened & tempered
45-50HRc 148 - 197 66 - 131 .0008
118
Laydown Grooving Internal Inserts
4 - Groove Std. Width 5 - Profile Style 6 - Groove Standard 7 - Groove Depth 8 - Carbide Grade
.03 - .08 " C - Full Profile DIN 472 Partial .013 - .079" VTX
DIN 472 VKX
DIN 7993 Partial
DIN 7993
DIN 76 ST, DIN 76 SH
CIR - CIRCLIP
119
DIN 472 Retaining Ring Grooves for Bores
W t1
W
W t1
t t W
t t
45°
d1
45° IC 5.0
d1 t
IC IC IC 5.0
IC IC W t
m
m W
Standard Standard
(Partial Profile) (Full Profile)
120
DIN 7993 Snap Ring Grooves
W
R R
W
t R R
t
IC 5.0 L
t IC 5.0 L
IC
t
IC W
R W
R Standard
(Partial Profile)
121
CIRCLIP Inch Standard
W
t W
t
IC
IC
Standard
(Partial Profile)
122
DIN 76 Thread Undercuts (For ISO Metric Threads in Accordance with DIN 13)
R g1 R R g1 R
t R t1 R g1 R t1 R g1 R
t R t1 t1
123
Laydown Grooving Internal Holders
Internal Holders
C A VR C 20 - 3
1 2 3 4 5 7 8 9
124
Internal Toolholders
D1
D1 D
D A
F A
F L1
L1 L
L
125
Internal Toolholders
D1
D1 D
D A
F
L1 A
F L
L1
L
126
Internal Toolholders
D1
D
D A
F
L1 A
F
L
L
Holding device
L
3xD
Minimum length
127
I NTERNAL GR OOVE T U R NING | FI NI S H I NG
Mini-V
Precise Turning, Grooving,
Threading & Face Grooving
Mini-V
Mini Tools for Small & Medium Bores
The Mini-V line by Groovex offers improved solutions for mini boring,
grooving and threading in bores starting from .307" (7.8mm)
NEW
Mini-VE Sizes 08 & 11
New Geometry for Inserts and Holders for
Improved Performance and Better Chip
Evacuation
130
Applications
BORING Pages 135 - 137
d
D min D min
D min
t max tm
R R
β β β
AL1 T A
d d
D min
AL1 AL1
T W
β
R
R
t max T
GROOVING tPages
max 138 - 141
w r w T
R Tt1 R
t max t max
Threading
F
d
D min
Helix
Y
T
h 131
Mini-V Technical Data
Recommended Grades, Cutting Speeds Vc [ft/min],
Feed f [ft/rev] and Max. Depth [In.]
P
Steel
5
6
Low Alloy Steel
(alloying elements≤5%)
Hardened
Hardened
275
350
131-262
131-262
131-524
131-492
.009-.017
.009-.015
7 High Alloy Steel Annealed 200 131-196 131-377 .007-.011
8 (alloying elements>5%) Hardened 325 131-196 131-328 .007-.011
9 Low Alloy (alloying elements <5%) 200 131-196 131-557 .007-.011
Cast Steel
10 High Alloy (alloying elements >5%) 225 131-196 131-426 .006-.011
11 Stainless Steel Non Hardened 200 131-196 131-590 .008-.013
12 Ferritic Hardened 330 131-196 131-590 .008-.012
M
13 Stainless Steel Austenitic 180 131-196 131-459 .009-.015
14 Austenitic Super Austenitic 200 131-196 131-459 .006-.010
Stainless 15 Stainless Steel Non Hardened 200 131-196 131-459 .009-.014
Steel 16 Cast Ferritic Hardened 330 131-196 131-459 .006-.010
17 Stainless Steel Austenitic 200 131-196 131-393 .007-.011
18 Cast Austenitic Hardened 330 131-196 131-393 .006-.010
28 Malleable Ferritic (short chips) 130 131-262 131-393 .009-.014
29 Cast Iron Pearlitic (long chips) 230 131-262 131-328 .007-.011
K
Cast Iron
30
31
Grey Cast Iron
Low Tensile Strength
High Tensile Strength
180
260
131-262
131-262
131-328
131-328
.008-.013
.007-.011
32 Ferritic 160 131-262 131-328 .005-.009
Nodular SG Iron
33 Pearlitic 260 131-262 131-295 .007-.011
34 Aluminium Alloys Non Aging 60 131-393 131-1312 .023-.039
35 Wrought Aged 100 131-393 131-1312 .019-.035
N(K)
Non-Ferrous
36
37
Aluminium Alloys
Cast
Cast & Aged
75
90
131-393
131-393
131-1312
131-656
.019-.035
.015-.023
Metals 38 Aluminium Alloys Cast Si 13-22% 130 131-393 131-656 .019-.035
39 Copper and Brass 90 131-393 131-656 .023-.039
40 Copper Alloys Bronze and Non Leaded Copper 100 131-393 131-656 .019-.035
19 Annealed (Iron based ) 200 65-98 65-98 .004-.008
S(M)
20 High Temperature Aged (Iron based) 280 65-98 65-98 .003-.007
21 Alloys Annealed (Nickel or Cobalt based) 250 49-65 49-65 .003-.007
Heat Resistant 22 Aged (Nickel or Cobalt based) 350 32-49 32-49 .003-.007
Material 23 Pure 99.5 Ti 400Rm 131-196 131-196 .003-.007
Titanium Alloys
24 α+β Alloys 1050Rm 65-98 65-98 .003-.007
H(K)
Hardened
25
Extra Hard Steel Hardened & Tempered
45-50HRc 49-65 49-65 .001-.003
VTX VBX
Excellent for Boring applications in medium-to-high Excellent for all applications and outstanding
cutting speeds and in dry conditions. wear resistance in low-to-medium cutting speeds,
Multi-layered AlTiN PVD coated, general purpose combined with good fracture toughness.
grade for prevention of peeling and chipping. TiCN PVD coated.
* For VTX Grade, increase speed by 20%.
132
F
Feed Rate f [inch/rev] F
d d
Grooving Boring W r
W
.0004 - .0012* 0.01 - 0.03 .0012 - .0039" 0.03 - 0.10
T
inch mm inchr mm
1
T
AL
t1 t1
Threading
Depths of Cut and Number of Passes
1. High pressure coolant is recommended
2. Infeed method - modified flank infeed 1°
Grooving Inserts
VE 08 00 GS W120 T 100 R VTX
1 2 3 4 5 6 7 8
1- Line Name 2 - Insert Size 3 - Corner Radius 4 - Type of Application 5 - Groove Width
VE - Mini-V Improved 08, 11, 14, 16 3 - Corner Radius D472 - Square Grooving Sharp Corner Radius W070 - .028" (0.7mm)
Geometry Inserts 00 - 0 GS - Square Grooving 0.05 mm Corner Radius W080 - .032" (0.8mm)
(sizes 08 & 11) 002 - .0008" (0.02mm) GSR - Square Grooving W090 - .035" (0.9mm)
V - Mini-V Inserts 020 - .008" (0.20mm) D7993 - Round Grooving D7993 W100 - .039" (1.0mm)
(sizes 14 & 16) FGW - Square Face Grooving Internal W110 - .043" (1.1mm)
FGR - Round Face Grooving Internal W120 - .047" (1.2mm)
FEGW - Square Face Grooving External W130 - .051" (1.3mm)
6 - Groove Depth 7 - RH or LH 8 - Carbide Grade
FEGR - Round Face Grooving External W150 - .059" (1.5mm)
T100 - .039" (1.0mm) R - RH VTX
W160 - .063" (1.6mm)
T230 - .091" (2.3mm) L - LH VBX
W180 - .071" (1.8mm)
T400 - .157" (4.0mm)
W200 - .079" (2.0mm)
T430 - .169" (4.3mm) W250 - .098" (2.5mm)
W300 - .118" (3.0mm)
Threading Inserts W350 - .138" (3.5mm)
W400 - .157" (4.0mm)
VE 08 TH .50 ISO R VTX
1 2 3 4 5 6 7
1
T
AL
AL1 t max
* VE11 is shown
d
D min
t max
R
β
AL1 T
* VE11 is shown
135
Boring & Profiling 30°
VE08 & VE11*
F F
d d
D min D min
t max t max
R R
β β
AL1 T AL1 T
* VE11 is shown
d d
d
D min D min
r
R R β
β β
AL1 T AL1 T T
AL1
t max t max t max
* VE11 is shown
136
Back Boring
VE08 & VE11* F
V14
F
F
d d
d
D min
D min
AL
AL1
1
AL1
β T
β R T r T
R t max t max
* VE11 is shown t max
V14
Min. Bore
Insert Style Ordering Code Dimensions Inch Grade
dia.
r
RH d T t max AL1 β F inch VTX
Inch mm
V14 V14BB R... .008 0.20 .354 .22 .138 60° 2° .343 .543 •
| • In stock ° Available upon request
d d d
W
AL
AL1 AL1
1
W W
R r
R T
T
t max T t max
t max
V14
Min. Bore
Insert Style Ordering Code Dimensions Inch Grade
dia.
r
RH d W+0.0012 T t max AL1 F inch VTX
Inch mm
V14 V14CH45 R .008 0.20 .354 .106 .220 .059 45° .343 .551 •
| • In stock ° Available upon request
137
Grooving DIN 472 - Sharp Corner Radius
VE08 & VE11* V14 F
F F
d
d
d
D min
W
D min
W r
R
r T
w t1
T r T
R
t max
* VE11 is shown t max
V14
Min. Bore
Insert Style Ordering Code Dimensions Inch Grade
dia.
Width of Circlip t max
RH W+0.0012 d T F r D min VTX
Inch mm Inch mm
V14
V14D472 W130T400 R .051 1.40 .055
.354 .157 4.00 .220 .354 .551 .315 •
V14D472 W160T400 R .063 1.70 .067 •
| • In stock ° Available upon request
138
Square Grooving - .002" (0.05mm) Corner Radius
VE08 & VE11* V14 & V16
F
F F
d d
d
D min D min
D min
R W r
R
w
w T
R T T
R r
t max
* VE11 is shown t max t max
d d
d
D min D min
D min
R W r
R
w
w T
R T T
R r
t max
* VE11 is shown t max t max
140
Round Grooving - DIN 7993
d
d d
D min
min D min
D
R W
R
w
w
R T
T
R R T
tt max
max t max
* VE11 is shown
V14
Min. Bore
Insert Style Ordering Code Dimensions Inch Grades
dia.
W+.0012 t max
RH d T F r D min VBX VTX
Inch mm Inch mm
V14D7993 W120T400 R .047 1.20 .024 • •
V14D7993 W157T400 R .062 1.57 .031 • •
V14D7993 W180T400 R .071 1.80 .035 • •
V14
V14D7993 W200T400 R
.354
.079 2.00
.157 4.0 .22 .354
.039
.551
• •
V14D7993 W220T400 R .087 2.20 .043 • •
V14D7993 W238T400 R .940 2.38 .047 • •
V14D7993 W300T400 R .118 3.00 .059 • •
V14D7993 W318T400 R .125 3.18 .062 • •
| • In stock ° Available upon request
141
Square Face Grooving
Internal F
d
D min
Min. Bore Dia.
r
r w t max
V14
Min. Bore
Insert Style Ordering Code Dimensions Inch Grades
dia.
W+.0012 t max
RH d T F r D min VBX VTX
Inch mm Inch mm
V14FGW100T150 R .039 1.0 .059 1.5 .303 • •
V14FGW150T250 R .059 1.5 .098 2.5 .343 • •
V14FGW200T300 R .079 2.0 .118 3.0 .362 • •
V-14 V14FGW200T500 R .354 .079 2.0 .197 5.0 .421 .354 .008 .551 • •
V14FGW250T300 R .098 2.5 .118 3.0 .362 • •
V14FGW250T500 R .098 2.5 .197 5.0 .421 • •
V14FGW300T300 R .118 3.0 .118 3.0 .362 • •
| • In stock ° Available upon request
External F
D min
w r t max
Min. Bore Dia.
V14
Min. Bore
Insert Style Ordering Code Dimensions Inch Grades
dia.
W+.0012 t max
RH d T F r D min VBX VTX
Inch mm Inch mm
V14FEGW100T150 R .039 1.0 .059 1.5 .287 • •
V14FEGW150T250 R .059 1.5 .098 2.5 .327 • •
V14FEGW200T300 R .079 2.0 .118 3.0 .346 • •
V14 V14FEGW200T500 R .354 .079 2.0 .197 5.0 .421 .354 .008 .472 • •
V14FEGW250T300 R .098 2.5 .118 3.0 .346 • •
V14FEGW250T500 R .098 2.5 .197 5.0 .421 • •
V14FEGW300T300 R .118 3.0 .118 3.0 .346 • •
| • In stock ° Available upon request
142
Round Face Grooving
Internal
F
D min
Min. Bore Dia.
R w t max
V14
Min. Bore
Insert Style Ordering Code Dimensions Inch Grades
dia.
W+.0012 t max
RH d T F r D min VBX VTX
Inch mm Inch mm
V14FGR050T150 R .039 1.0 .059 1.5 .303 .030 • •
V-14 V14FGR100T300 R .354 .079 2.0 .118 3.0 .362 .354 .059 .551 • •
V14FGR150T300 R .118 3.0 .118 3.0 .362 .059 • •
| • In stock ° Available upon request
External F
D min
w t max
Min. Bore Dia.
V14
Min. Bore
Insert Style Ordering Code Dimensions Inch Grades
dia.
W+.0012 t max
RH d T F r D min VBX VTX
Inch mm Inch mm
V-14
V14FEGR100T500 R
.354
.039 2 .197 5.0 .421
.354
.030
.472
• •
V14FEGR125T500 R .098 2.5 .197 5.0 .421 .049 • •
| • In stock ° Available upon request
143
Threading
d d
d
D min D min Y
Helix Helix
Y Y
Helix
T T r T
h h h
Internal
60°
External
Partial Profile 60° | Mini-VE
Insert Style Pitch Ordering Code Dimensions Inch Helix Grade
TPI mm RH / LH d T F Y r h max Deg. VTX
48-32 0.5-0.75 VE08TH H60R/L .165 .020 .001 .019 1.5 •
V14 24-20 1.0-1.25 VE08TH I60R/L .236 .181 .176 .031 .004 .029 2.5 •
16-14 1.5-1.75 VE08TH J60R/L .187 .035 .005 .041 3.0 •
48-32 0.5-0.75 VE11TH H60R/L .228 .020 .001 .019 1.5 •
V16 24-20 1.0-1.25 VE11TH I60R/L .315 .228 .239 .031 .004 .029 1.5 •
16-14 1.5-1.75 VE11TH J60R/L .221 .035 .005 .041 3.0 •
| • In stock ° Available upon request
Internal
55°
h
144
Threading
Internal F
F
d
d
D min
Helix
D min Y Helix
Y
T
T h
h * VE11 is shown
1/4P Internal
60°
h
Min Thread Insert Style Pitch Ordering Code Dimensions Inch Helix Grade
mm RH / LH d T F Y h min Deg. VTX
M8x.5 0.50 VE08TH .50ISOR/L .152 .014 .011 1.0 •
M8.5x.75 0.75 VE08TH .75ISOR/L .165 .020 .017 1.5 •
M9x1.0
VE08
1.00 VE08TH 1.00ISOR/L
.236 .181
.169 .020 .023 2.0 •
M10x1.25 1.25 VE08TH 1.25ISOR/L .175 .031 .028 2.5 •
M10x1.5 1.50 VE08TH 1.50ISOR/L .180 .035 .034 3.0 •
M12x1.75 1.75 VE08TH 1.75ISOR/L .189 .035 .040 3.0 •
M14x2.0 VE11 2.00 VE11TH 2.00ISOR/L .315 .230 .255 .043 .045 2.5 •
| • In stock ° Available upon request
1/4P Internal
60°
h
Internal
R 0.137P
55°
Defined by: B.S.84:1956, DIN 259,
h
ISO228/1:1982
Tolerance class: Medium Class A
R 0.137P
Min Thread Insert Style Ordering Code Dimensions Inch Helix Grades
TPI RH / LH d T F Y h min Deg. VTX
1/2”x19W VE11 19 VE11TH 19WR/L .315 .230 .243 .033 .034 2.00 •
| • In stock ° Available upon request
145
Threading
Internal F
F
d
D mind
Helix
D min Y Helix
Y
T
hT
h * VE11 is shown
Internal
Min Thread Insert Style Ordering Code Dimensions Inch Helix Grade
TPI RH/LH d T F Y h min Deg. VTX
1/4"-19BSPT VE11 19 VE11TH 19BSPTR/L .315 .222 .243 .033 .034 2.0 •
| • In stock ° Available upon request
Internal
30° 30°
Min Thread Insert Style Ordering Code Dimensions Inch Helix Grades
TPI RH / LH d T F Y h min Deg. VBX
1/8"-27NPT
VE08
27 VE08TH 27NPTR/L
.236 .181
.171 .024 .025 2.0 •
1/4"-18NPT 18 VE08TH 18NPTR/L .189 .035 .039 2.0 •
| • In stock ° Available upon request
O O Internal
30 30
Internal
Min Thread Insert Style Ordering Code Dimensions Inch Helix Grades
TPI RH / LH d T F Y h min Deg. VTX
TR10x2.0
VE08
2 VE08TH 2.0TRR/L
.236 .181
.189 .035 .049 3.5 •
TR11x3.0 3 VE08TH 3.0TRR/L .195 .046 .069 5.0 •
TR16x4.0 VE11 4 VE11TH 4.0TRR/L .315 .230 .257 .063 .089 5.0 •
| • In stock ° Available upon request
146
Mini-V Holders
Alloy Steel Shank.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............................................................................. 148
Reinforced Alloy Steel Shank.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................. 149
Carbide Shank.. . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................. 150
Reinforced Carbide Shank.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................. 152
Carbide Shank for Sleeves.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............................................................................. 153
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................. 154
V-CAP Holders . . . .. . . . . . . .N. . . E. . .W
Micro Holders for Carbide Shank Sleeve Clamping............................................................. 155
Mini-V Sleeves
MH C 16 - 6
1 2 3 4
V-CAP Holders
MH C 3 - 8 - C4
1 2 S 5 6
1- Holder Type 2 - Coolant 3 - V-CAP System 4 - Shank Diameter 5 - Sleeve Bore Dia.
MH - Microscope Holder C - Coolant Channels S - Shrink Clamping 12-.472”, 16-.630”, 0500”-1/2”, .236", .315"
0625”-5/8”, 0750”-3/4”
6 - V-CAP polygon Size
C3, C4
147
Alloy Steel Shank
L
L
L1
L1
A A
D D
D1
A L L1 D D1 Screw* Key
VE08 VE08-06250472 .614 3.15 .472 .625 .236 SNV08 K2T
VE11 VE11-06250472 .614 3.15 .472 .625 .315 SNV11 K3T
* Tightening Torque: 1.6 Nm.
L1 D
A L D1 Screw* Key
Inch mm Inch mm
VE08 VE08-1612 .575 3.150 .472 12.0 .630 16.0 .2 SNV08 K2T
VE11 VE11-1612 .575 3.150 .472 12.0 .630 16.0 .3 SNV11 K3T
* Tightening Torque: 1.6 Nm.
L1 D
Holder RH A L D1 Screw* Key
Inch mm Inch mm
V16 V16-1622 .591 3.937 .866 22.0 .630 16.0 .433 SNV16 K4T
* Tightening Torque: 1.6 Nm.
148
Reinforced Alloy Steel Shank
L
L1
S2
D
S1
L1 D
Holder RH A L S1 S2 Screw* Key
Inch mm Inch mm
V14 V14-1620 .591 3.937 .787 2.0 .630 16.0 .374 .433 SNV14 KT15
* Tightening Torque: 1.6 Nm.
149
Carbide Shank
L
L1
D1
A L L1 D D1 Screw* Key
CVE08-05000827 3.150 .827
CVE08-05001180 3.540 1.180
VE08 .433 .500 .236 SNV08 K2T
CVE08-05001654 3.940 1.654
CVE08-05001969 4.330 1.969
CVE11-05001142 3.740 1.140
CVE11-05001654 4.330 1.650
VE11 .433 .500 .315 SNV11 K3T
CVE11-05002205 4.720 2.200
CVE11-05002520 5.120 2.520
* Tightening Torque: VE08 - 1.6 Nm | VE11 - 2.2 Nm.
L1 D
A L D1 Screw* Key
Inch mm Inch mm
CVE08-1221 3.169 .827 21.0
CVE08-1230 3.563 1.181 30.0
VE08 .394 .472 12.0 6 SNV08 K2T
CVE08-1242 3.937 1.654 42.0
CVE08-1250 4.528 1.969 50.0
CVE11-1229 3.740 1.142 29.0
CVE11-1242 4.331 1.654 42.0
VE11 .394 .472 12.0 8 SNV11 K3T
CVE11-1256 4.724 2.205 56.0
CVE11-1264 5.118 2.520 64.0
* Tightening Torque: VE08 - 1.6 Nm | VE11 - 2.2 Nm.
150
Carbide Shank
L
L1
A
D1
L1 D
Holder RH A L D1 Screw* Key
Inch mm Inch mm
CV16-1240 5.118 1.575 40.0
V16 CV16-1256 .433 5.118 2.205 56.0 .472 12.0 .433 SNV16 K4T
CV16-1280 5.906 3.150 80.0
* Tightening Torque: 5.0 Nm max.
151
Reinforced Carbide Shank
L
L1
S2
D
S1
L1 D
Holder RH A L S1 S2 Screw* Key
Inch mm Inch mm
CV14-1234 3.937 1.339 34.0
CV14-1245** .433 4.331 1.772 45.0 .472 12.0 .366 .469
CV14-1264** 5.118 2.520 64.0
V14 CV14-1634 3.937 1.339 34.0 SNV14 KT15
CV14-1645** 4.331 1.772 45.0
.591 .630 16.0 .366 .490
CV14-1664** 5.118 2.520 64.0
CV14-1675** 5.709 2.953 75.0
CV16-1640 5.106 1.563 39.7
V16 CV16-1656** .591 5.106 2.193 55.7 .630 16.0 .433 .581 SNV16 K4T
CV16-1680** 5.894 3.138 79.7
* Tightening Torque: V14 - 2.8 Nm max. | V16 - 5.0 Nm max.
** For boring, chamfering and face grooving only.
152
Carbide Shank for Sleeves
L
D
D1
L1
153
V-CAP Holders for Carbide Shank Sleeve Clamping N EW
Coolant Holes
L
H d
L1
L2
D
B
Spare Parts
Micro Ordering Code Dimensions Inch
Insert Dia.
d D B H L1 L2 L Shrink Screw* Key
MHCS-6-C3 1.260 .933 .787 1.181 1.772 2.520
.236" (6.0mm)
MHCS-6-C4 1.575 .933 .787 1.181 1.969 2.913
SM5x10-15IP L15IP
MHCS-8-C3 1.260 .965 .846 1.575 2.165 2.913
.315" (8.0mm)
MHCS-8-C4 1.575 .965 .846 1.575 2.362 3.307
154
Micro Holders for Carbide Shank Sleeve Clamping
L
d
H H1
13.5
B D
D=B
d H1 H L Screw* Key
Inch mm
MHC 12-6 .472 12.0 .630 .425 2.756
.236" (6.0mm) MHC 16-6 .630 16.0 .732 .583 2.953
MHC 20-6 .787 2.0 .866 .740 3.307 SL7DT15 KT15
MHC 16-8 .630 16.0 .732 .583 3.937
.315" (8.0mm)
MHC 20-8 .787 2.0 .866 .740 4.075
* Tightening Torque: 2.8 Nm max.
155
I NTERNAL GR OOVE T U R NING | FI NI S H I NG
microscope
Precise Turning, Grooving, Threading
& Face Grooving
microscope The Microscope line offers new and improved solutions for micro
boring, grooving, chamfering and threading in bores as small as
.039" (1.0mm).
Micro Tools for Small Bores The Microscope line offers a large and extended range of
single-ended inserts and a full range of toolholders with a simple
clamping system.
Stopper Pin
Provides precise cutting edge
height and perfect axial location
Boring with Boring Boring & Boring with Square Pre-Part Off
Chip Breaker Profiling Chip Former Grooving
Miniature Toolholders
d
F
L1
80
80
L1
3°
470
Round Groove
Threading
W
Square Round Face Grooving Face Grooving F
F
d
F
d
t max R t max
W
L1 L1
Round Face
Grooving Pre-Part Off
Internal
L
L1
OLD F
THREADING Pages 186 - 188 t t max
W
Threading
old Round Groove L1
F
d
R
Y
L1 159
Boring Technical Data
Recommended VBX Cutting Speeds Vc [ft/min]
Vargus No.
Material Hardness Vc [ft/min]
Group Material
Brinell HB (Coated)
Carbide Grade
P
Low Alloy Steel
5 Hardened 275 230-328
(alloying elements≤5%)
Steel 6 Hardened 350 230-328 VBX - TiCN PVD coated
7 High Alloy Steel Annealed 200 262-394 VTX - AlTiN PVD coated
8 (alloying elements>5%) Hardened 325 230-361
9 Low Alloy (alloying elements <5%) 200 262-361
Cast Steel
10 High Alloy (alloying elements >5%) 225 262-361
11 Stainless Steel Non Hardened 200 262-328
12 Ferritic Hardened 330 230-361
13 Stainless Steel Austenitic 180 262-361
M
Stainless
14 Austenitic
15 Stainless Steel
Super Austenitic
Non Hardened
200
200
262-361
131-197
Steel
16 Cast Ferritic Hardened 330 98-164
17 Stainless Steel Austenitic 200 131-197
18 Cast Austenitic Hardened 330 98-164
28 Malleable Ferritic (short chips) 130 262-361
29 Cast Iron Pearlitic (long chips) 230 262-361
K
Cast Iron
30
31
Grey Cast Iron
Low Tensile Strength
High Tensile Strength
180
260
262-361
262-361
32 Ferritic 160 262-361
Nodular SG Iron
33 Pearlitic 260 262-361
34 Aluminium Alloys Non Aging 60 328-984
35 Wrought Aged 100 328-492
N(K)
Non-Ferrous
36
37
Aluminium Alloys
Cast
Cast & Aged
75
90
328-492
197-328
Metals 38 Aluminium Alloys Cast Si 13-22% 130 328-492
39 Copper and Brass 90 197-328
40 Copper Alloys Bronze and non leaded Copper 100 197-328
19 Annealed (Iron based) 200 82-148
S(M)
20 High Temperature Aged (Iron based) 280 66-98
21 Alloys Annealed (Nickel or Cobalt based) 250 49-66
Heat
Resistant 22 Aged (Nickel or Cobalt based) 350 33-49
Material 23 Pure 99.5 Ti 400Rm 197-328
Titanium Alloys
24 α+β Alloys 1050Rm 131-164
H(K)
Hardened
25
Extra Hard Steel Hardened & Tempered
45-50HRc 66-148
26 51-55HRc 66-131
Material
VTX VBX
Excellent for Boring applications in medium-to-high Excellent for all applications and outstanding
cutting speeds and in dry conditions. wear resistance in low-to-medium cutting speeds,
Multi-layered AlTiN PVD coated, general purpose combined with good fracture toughness.
grade for prevention of peeling and chipping. TiCN PVD coated.
* For VTX Grade, increase speed by 20%.
160
Boring Technical Data
Boring and Profiling in Finishing Operations –
Recommended Depth of Cut [ap max. (Inch)] and Feed f[in/rev]
Machining Recommendation
Boring
When encountering chip flow evacuation problems, it is recommended
to increase the distance between the workpiece and sleeve.
L
d
F
L1
80
80
L1
S max
R
161
Grooving Technical Data
Recommended VBX Cutting Speeds Vc [ft/min] and Feed f [in/rev]
Vargus No.
Material
Material
Hardness Vc[ft/min] Feed Carbide Grade
Group Brinell HB (Coated) f [in/rev]
P
Low Alloy Steel
5 Hardened 275 130-196 .0016
(alloying elements≤5%)
Steel 6 Hardened 350 98-163 .0012
7 High Alloy Steel Annealed 200 98-163 .0016
8 (alloying elements>5%) Hardened 325 82-130 .0012 VBX - TiCN PVD coated
9 Low Alloy (alloying elements <5%) 200 98-163 .0016 VTX - AlTiN PVD coated
Cast Steel
10 High Alloy (alloying elements >5%) 225 82-130 .0016
11 Stainless Steel Non Hardened 200 196-326 .0016
Machining
12 Ferritic Hardened 330 130-196 .0012
13 Stainless Steel Austenitic 180 163-293 .0016
Recommendation
M
Stainless
14 Austenitic
15 Stainless Steel
Super Austenitic
Non Hardened
200
200
130-196
130-196
.0016
.0016
Steel
16 Cast Ferritic Hardened 330 98-163 .0012
17 Stainless Steel Austenitic 200 130-196 .0016
18 Cast Austenitic Hardened 330 98-163 .0012
28 Malleable Ferritic (short chips) 130 163-228 .0012
29 Cast Iron Pearlitic (long chips) 230 163-228 .0012
K
Cast Iron
30
31
Grey Cast Iron
Low Tensile Strength
High Tensile Strength
180
260
163-228
130-196
.0012
.0012 Machine the groove in one
32 Ferritic 160 163-228 .0012 motion instead of intervals.
Nodular SG Iron
33 Pearlitic 260 196-261 .0012
34 Aluminium Alloys Non Aging 60 326-978 .0016
35 Wrought Aged 100 326-489 .0016
N(K)
Non-Ferrous
36
37
Aluminium Alloys
Cast
Cast & Aged
75
90
326-489
196-326
.0016
.0016
Metals 38 Aluminium Alloys Cast Si 13-22% 130 326-489 .0016
39 Copper and Brass 90 196-326 .0016
40 Copper Alloys Bronze and non leaded Copper 100 196-326 .0016
19 Annealed (Iron based) 200 82-147 .0008
OLD
S(M)
Heat
20 High Temperature
21 Alloys
Aged (Iron based)
Annealed (Nickel or Cobalt based)
280
250
65-98
49-65
.0008
.0008
Resistant 22 Aged (Nickel or Cobalt based) 350 33-49 .0008
Material 23 Pure 99.5 Ti 400Rm 196-326 .0008
Titanium Alloys
24 α+β Alloys 1050Rm 130-163 .0008
H(K)
Hardened
25
Extra Hard Steel Hardened & Tempered
45-50HRc 65-130 .0008
VTX VBX
Excellent for Boring applications in medium-to-high Excellent for all applications and outstanding
cutting speeds and in dry conditions. wear resistance in low-to-medium cutting speeds,
Multi-layered AlTiN PVD coated, general purpose combined with good fracture toughness.
grade for prevention of peeling and chipping. TiCN PVD coated.
* For VTX Grade, increase speed by 20%.
162
Threading Technical Data
Recommended VBX Cutting Speeds Vc [ft/min]
P
Low Alloy Steel
5 Hardened 275 293-473
(alloying elements≤5%)
Steel 6 Hardened 350 261-440
7 High Alloy Steel Annealed 200 212-375
8 (alloying elements>5%) Hardened 325 163-326 VBX - TiCN PVD coated
9 Low Alloy (alloying elements <5%) 200 98-163 VTX - AlTiN PVD coated
Cast Steel
10 High Alloy (alloying elements >5%) 225 82-130
11 Stainless Steel Non Hardened 200 261-391
12 Ferritic Hardened 330 179-310 Calculation of N [RPM]
13 Stainless Steel Austenitic 180 196-326
M
Stainless
14 Austenitic
15 Stainless Steel
Super Austenitic
Non Hardened
200
200
196-261
147-212 N=
12x Vc
Steel
16 Cast Ferritic Hardened 330 147-212
πxD N D
K
Vc - Cutting Speed [ft/min]
30 Low Tensile Strength 180 196-261 Vc - Cutting Speed [ft/min]
Grey Cast Iron D - Workpiece Diameter [Inch]
31 High Tensile Strength 260 130-228 D - Workpiece Diameter [Inch]
Cast Iron
32 Ferritic 160 196-261
Nodular SG Iron
33 Pearlitic 260 228-293
Number of Passes for Threading
34 Aluminium Alloys Non Aging 60 261-783
35 Wrought Aged 100 326-554
N(K)
Pitch mm 0.50 0.75 1.00 1.25 1.50 1.75 2.00
36 Cast 75 326-489
Aluminium Alloys
37 Cast & Aged 90 196-326
Non-Ferrous TPI 48 32 24 20 16 14 12
Metals 38 Aluminium Alloys Cast Si 13-22% 130 326-489
39 Copper and Brass 90 261-652 No. of Passes
6-9 6-11 6-12 8-14 9-15 11-18 11-18
40 Copper Alloys Bronze and non leaded Copper 100 261-652 (Microscope)
19 Annealed (Iron based) 200 82-147
S(M)
Heat
20 High Temperature
21 Alloys
Aged (Iron based)
Annealed (Nickel or Cobalt based)
280
250
65-98
49-65
Resistant 22 Aged (Nickel or Cobalt based) 350 33-49
Material 23 Pure 99.5 Ti 400Rm 196-326
Titanium Alloys
24 α+β Alloys 1050Rm 130-163
H(K)
Hardened 26
25
Extra Hard Steel Hardened & Tempered
45-50HRc 65-130
51-55HRc 65-130
Material
VTX VBX
Excellent for Boring applications in medium-to-high Excellent for all applications and outstanding
cutting speeds and in dry conditions. wear resistance in low-to-medium cutting speeds,
Multilayered AlTiN PVD coated, general purpose combined with good fracture toughness.
grade for prevention of peeling and chipping. TiCN PVD coated.
* For VTX Grade, increase speed by 20%.
163
microscope Inserts
Boring with HPC.. . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 166
Boring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 167
Boring MX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 170
Boring with Chip Breaker with HPC.. . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 171
Boring with Chip Breaker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 172
Boring with Chip Former with HPC. . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 173
Boring with Chip Former.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 174
Boring 20°.. . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 175
Boring 90°.. . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 175
Boring & Profiling with Chip Breaker & HPC (CBLF).............................................................. 176
Boring & Profiling (CL) with HPC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 177
Boring & Profiling (CL).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 177
Back Boring. . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 178
Boring & Chamfering 45°.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 178
Square Grooving with HPC.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 179
Square Grooving.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 180
Round Grooving. . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 182
Pre-Part Off.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 182
Face Grooving with HPC.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 183
Face Grooving.. . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 184
Round Face Grooving with HPC.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 185
Face Chamfering 45°.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 185
Threading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ......................................................................... 186
164
microscope Insert Ordering Code
Face
Face
Face Grooving
Grooving
Grooving External
Internal
External
9 - Coolant
FG Face Grooving Internal C - Internal Coolant
Pre-Part Of NONE - Without Coolant
FaceOf
Pre-Part Grooving External
FP Face Grooving External
10 - Carbide Grade
Pre-Part Of
Round Face
PP Grooving
Pre-Part OffInternal
Round Face Grooving Internal VBX, VTX
Threading
Round Face Grooving
Round
RFG Face Grooving Internal
Threading
Internal
Threading
TH Threading
165
Boring MC422R05L09R
Boring
Boring with High Pressure Coolant
BoringLMC422R05L09R D min
ref
Internal
D min
L ref L
A d
F
b
L1 DETAIL A
a
A 80 ß°
8 0
b
F L1 DETAIL A
a
S max
L2 ref ß°
A b
α°
F L1 S max
R
S max
L2 ref
a F
A b R
α°
L1
L2 ref
* L2 Ref: Repeatability within +/- .0008" (0.02mm) a F R | Right hand shown
L1
L2 ref
Shank Min. Bore Ordering Code Dimensions Inch Grades
Dia. Dia.
L1 R
d D min. RH/LH F S max a b α° β° L2 ref* L ref VBX VTX
Inch mm Inch mm
.118" (3.0mm) M430BCR15L20RC** .787 20.0 .0059 0.15 .027 .0079 .106 .088 17.5 8 .898 1.567 • •
OLD Boring
M432BCR15L10RC** .394 10.0 .0059 0.15 .035 .0079 .114 .096 17.5 8 .453 1.122 • •
.126" (3.2mm)
M432BCR15L20RC** .787 20.0 .0059 0.15 .035 .0079 .114 .096 17.5 8 .898 1.567 • •
.157"
(4.0mm)
.157" (4.0mm) M440BCR20L10RC .394 10.0 .0079 0.20 .075 .0098 .153 .114 17.5 8 .453 1.122 • •
M442BCR15L10RC** .394 10.0 .0059 0.15 .076 .0118 .155 .123 19 8 .453 1.122 • •
.165" (4.2mm) M442BCR20L10RC** .394 10.0 .0079 0.20 .078 .0118 .157 .123 19 8 .453 1.122 • •
M442BCR15L21RC** .827 21.0 .0059 0.15 .076 .0118 .155 .123 19 8 .898 1.567 • •
M552BCR20L10RC** .394 10.0 .0079 0.20 .096 .0197 .194 .159 21 8 .478 1.378 • •
M552BCR20L15RC .591 15.0 .0079 0.20 .096 .0197 .194 .159 21 8 .715 1.614 • •
.197"
(5.0mm)
.205" (5.2mm) M552BCR20L21RC** .827 21.0 .0079 0.20 .096 .0197 .194 .159 21 8 .911 1.811 • •
M552BCR20L30RC** 1.181 30.0 .0079 0.20 .096 .0197 .194 .159 21 8 1.266 2.165 • •
M552BCR20L35RC** 1.378 35.0 .0079 0.20 .096 .0197 .194 .159 21 8 1.463 2.362 • •
** LH Tools are available upon request.
| • In stock ° Available upon request
166
Boring
Boring
Boring MC422R05L09R
Boring MC422R05L09R
D min
Internal L ref
D min
L ref
L
d
F
A
L1
b b
A DETAIL A
80 DETAIL A
Figure 1: M... a 8 0
a ß°
ß°
F L1
S max
F L2L1ref
S max
A L2 ref
b S max
R
α° α°
A b
Figure 2: MC...
a F R
a L1 R
F
* L2 Ref: Repeatability within +/- .0008" (0.02mm) L1 ref
L2 | Right hand shown
L2 ref
D min
Internal L ref
d
F
A
L1
b
DETAIL A
80
Figure 1: M... a 8 0
ß°
F L1
S max
L2 ref
A b S max
R
α°
Figure 2: MC...
a F R
L1
* L2 Ref: Repeatability within +/- .0008" (0.02mm) L2 ref | Right hand shown
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
L1 R
d D min. RH/LH F S max a b α° β° L2 ref* L ref VBX VTX
Inch mm Inch mm
MC432BCR05L10R/L .394 10.0 .0020 0.05 .056 .0079 .114 .096 17.5 8 .453 1.122 • •
MC432BCR15L10R/L .394 10.0 .0059 0.15 .057 .1142 .098 .689 17.5 8 .453 1.122 • •
MC432BCR05L16R/L .630 16.0 .0020 0.05 .056 .1142 .096 .689 17.5 8 .717 1.386 • •
OLD Boring MC432BER05L16R** .630 16.0 .0020 0.05 .056 .1142 .096 .689 17.5 8 .717 1.386 • •
MC432BCR15L16R/L .630 16.0 .0059 0.15 .057 .1130 .098 .689 17.5 8 .717 1.386 • •
.126" (3.2mm) MC432BER15L16R** .630 16.0 .0059 0.15 .057 .1130 .098 .689 17.5 8 .717 1.386 • •
MC432BCR05L20R/L .787 20.0 .0020 0.05 .056 .1142 .096 .689 17.5 8 .898 1.567 • •
MC432BER05L20R** .787 20.0 .0020 0.05 .056 .1142 .096 .689 17.5 8 .898 1.567 • •
MC432BCR15L20R/L .787 20.0 .0059 0.15 .055 .1130 .096 .689 17.5 8 .898 1.567 • •
MC432BER15L20R** .787 20.0 .0059 0.15 .055 .1130 .096 .689 17.5 8 .898 1.567 • •
MC432BER10L23R ** .906 23.0 .0039 0.10 .056 .1142 .096 .689 17.5 8 .898 1.799 • •
MC437BCR05L10R** .394 10.0 .0020 0.05 .070 .0079 .137 .120 17.5 8 .453 1.122 • •
MC437BCR15L10R/L .394 10.0 .0059 0.15 .069 .1354 .120 .689 17.5 8 .453 1.122 • •
MC437BCR15L15R .591 15.0 .0059 0.15 .069 .1354 .120 .689 17.5 8 .717 1.386 • •
MC437BCR15L15L .591 15.0 .0059 0.15 .069 .1354 .120 .689 17.5 8 .717 1.386 • •
.146" (3.7mm) MC437BER15L15R** .591 15.0 .0059 0.15 .069 .1354 .120 .689 17.5 8 .717 1.386 • •
MC437BCR15L20R .787 20.0 .0059 0.15 .069 .1354 .120 .689 17.5 8 .898 1.567 • •
MC437BCR15L20L .787 20.0 .0059 0.15 .069 .1354 .120 .689 17.5 8 .898 1.567 • •
MC437BER15L20R** .787 20.0 .0059 0.15 .069 .1354 .120 .689 17.5 8 .898 1.567 • •
.157" MC437BCR05L26R** 1.024 26.0 .0020 0.05 .070 .1370 .120 .689 17.5 8 1.130 1.799 • •
(4.0mm) M442BCR03L10R** .394 10.0 .0012 0.03 .078 .0118 .157 .123 19 8 .453 1.122 • •
M442BCR05L10R** .394 10.0 .0020 0.05 .077 .1555 .136 .827 21 8 .453 1.122 • •
MS442BCR15L10R .394 10.0 .0059 0.15 .076 .1547 .123 .748 19 8 .453 1.122 • •
MS442BCR15L10L .394 10.0 .0059 0.15 .076 .1547 .123 .748 19 8 .453 1.122 • •
M442BCR05L16R/L .630 16.0 .0020 0.05 .077 .1555 .136 .827 21 8 .717 1.386 • •
M442BER05L16R** .630 16.0 .0020 0.05 .077 .1555 .136 .827 21 8 .717 1.386 • •
M442BCR03L15R** .591 15.0 .0012 0.03 .078 .1567 .123 .748 19 8 .717 1.386 • •
MS442BCR15L16R .630 16.0 .0059 0.15 .076 .1547 .123 .748 19 8 .717 1.386 • •
MS442BCR15L16L .630 16.0 .0059 0.15 .076 .1547 .123 .748 19 8 .717 1.386 • •
.165" (4.2mm)
MS442BER15L16R** .630 16.0 .0059 0.15 .076 .1547 .123 .748 19 8 .717 1.386 • •
M442BCR05L21R .827 21.0 .0020 0.05 .077 .1555 .136 .827 21 8 .898 1.567 • •
M442BCR05L21L .827 21.0 .0020 0.05 .077 .1555 .136 .827 21 8 .898 1.567 • •
M442BER05L21R** .827 21.0 .0020 0.05 .077 .1555 .136 .827 21 8 .898 1.567 • •
MS442BCR15L21R .827 21.0 .0059 0.15 .076 .1547 .123 .748 19 8 .898 1.567 • •
MS442BCR15L21L .827 21.0 .0059 0.15 .076 .1547 .123 .748 19 8 .898 1.567 • •
MS442BER15L21R** .827 21.0 .0059 0.15 .078 .1567 .123 .748 19 8 .972 1.642 • •
M442BCR03L25R** .984 25.0 .0012 0.03 .078 .1567 .123 .748 19 8 1.130 1.799 • •
M442BCR05L26R/L 1.024 26.0 .0020 0.05 .077 .1555 .136 .827 21 8 1.130 1.799 • •
MS442BCR15L26R/L 1.024 26.0 .0059 0.15 .076 .1547 .123 .748 19 8 1.130 1.799 • •
M442BCR05L30R** 1.181 30.0 .0020 0.05 .077 .1555 .136 .827 21 8 1.327 1.996 • •
** LH Tools are available upon request. | • In stock ° Available upon request | Inserts marked with E are available with edge prep.
168
Boring
Boring (con't) Boring MC422R05L09R
Boring MC422R05L09R
Internal L ref
D min
L ref L D min
d
F
A L1
80
b b
A DETAIL A
8 0
a DETAIL A
a ß°
ß°
F L1
S max
F L2L1
ref S max
R
S max
A L2 ref
b
α° α°
A b
a F R
L1
* L2 Ref: Repeatability within +/- .0008" (0.02mm) a F R | Right hand shown
L2L1ref
Shank Dia. Min. Bore Dia. Ordering Code L2 ref Dimensions Inch Grades
L1 R
d D min. RH/LH F S max a b α° β° L2 ref* L ref VBX VTX
Inch mm Inch mm
M552BCR05L10R** .394 10.0 .0020 0.05 .096 .0197 .194 .167 19 8 .478 1.378 • •
M552BCR20L10R/L .394 10.0 .0079 0.20 .096 .0197 .194 .159 21 8 .478 1.378 • •
M552BCR03L15R** .591 15.0 .0012 0.03 .096 .0197 .194 .167 21 8 .715 1.614 • •
OLD Boring M552BCR20L16R .630 16.0 .0079 0.20 .096 .0197 .194 .159 21 8 .715 1.614 • •
M552BCR20L16L .630 16.0 .0079 0.20 .096 .0197 .194 .159 21 8 .715 1.614 • •
M552BCR05L20R** .787 20.0 .0020 0.05 .096 .0197 .194 .167 21 8 .911 1.811 • •
M552BCR20L20R** .787 20.0 .0079 0.20 .096 .0197 .194 .159 21 8 .911 1.811 • •
.197"
(5.0mm)
.205" (5.2mm) M552BCR20L21R/L .827 21.0 .0079 0.20 .096 .0197 .194 .159 21 8 .911 1.811 • •
M552BER20L21R** .827 21.0 .0079 0.20 .096 .0197 .194 .159 21 8 .911 1.811 • •
M552BCR20L26R/L 1.024 26.0 .0079 0.20 .096 .0197 .194 .159 21 8 1.108 2.008 • •
M552BER20L26R** 1.024 26.0 .0079 0.20 .096 .0197 .194 .159 21 8 1.108 2.008 • •
M552BCR05L30R** 1.181 30.0 .0020 0.05 .095 .0197 .194 .167 21 8 1.266 2.165 • •
M552BCR20L30R/L 1.181 30.0 .0079 0.20 .096 .0197 .194 .159 21 8 1.266 2.165 • •
M552BCR20L35R 1.378 35.0 .0079 0.20 .096 .0197 .194 .159 21 8 1.463 2.362 • •
M552BCR20L35L 1.378 35.0 .0079 0.20 .096 .0197 .194 .159 21 8 1.463 2.362 • •
M662BCR20L16R/L .630 16.0 .0079 0.20 .115 .0197 .233 .186 22 8 .720 1.654 • •
M662BCR05L20R** .787 20.0 .0020 0.05 .115 .0197 .233 .186 22 8 .917 1.850 • •
M662BCR20L21R .827 21.0 .0079 0.20 .115 .0197 .233 .186 22 8 .917 1.850 • •
M662BCR20L21L .827 21.0 .0079 0.20 .115 .0197 .233 .186 22 8 .917 1.850 • •
M662BCR20L26R 1.024 26.0 .0079 0.20 .115 .0197 .233 .186 22 8 1.114 2.047 • •
.236"
.244" (6.2mm)
M662BCR20L26L 1.024 26.0 .0079 0.20 .115 .0197 .233 .186 22 8 1.114 2.047 • •
(6.0mm) M662BCR05L30R** 1.181 30.0 .0020 0.05 .115 .0197 .233 .186 22 8 1.272 2.205 • •
M662BCR20L30R/L 1.181 30.0 .0079 0.20 .115 .0197 .233 .186 22 8 1.272 2.205 • •
M662BER20L30R** 1.181 30.0 .0079 0.20 .115 .0197 .233 .186 22 8 1.272 2.205 • •
M662BCR20L35R/L 1.378 35.0 .0079 0.20 .115 .0197 .233 .186 22 8 1.469 2.402 • •
M662BER20L35R** 1.378 35.0 .0079 0.20 .115 .0197 .233 .186 22 8 1.469 2.402 • •
M662BCR20L40R/L 1.575 40.0 .0079 0.20 .115 .0197 .233 .186 22 8 1.665 2.598 • •
M772BCR10L15R** .591 15.0 .0039 0.10 .135 .0197 .273 .226 22 8 .646 1.614 • •
M772BCR20L15R/L .591 15.0 .0079 0.20 .135 .0197 .273 .226 22 8 .646 1.614 • •
M772BCR20L25R .984 25.0 .0079 0.20 .135 .0197 .273 .226 22 8 1.039 2.008 • •
M772BCR20L25L .984 25.0 .0079 0.20 .135 .0197 .273 .226 22 8 1.039 2.008 • •
M772BCR20L30R** 1.181 30.0 .0079 0.20 .135 .0197 .273 .226 22 8 1.236 2.205 • •
.276"
(7.0mm)
.283" (7.2mm) M772BCR20L35R/L 1.378 35.0 .0079 0.20 .135 .0197 .273 .226 22 8 1.433 2.402 • •
M772BCR20L40R/L 1.575 40.0 .0079 0.20 .135 .0197 .273 .226 22 8 1.630 2.598 • •
M772BER20L40R** 1.575 40.0 .0079 0.20 .135 .0197 .273 .226 22 8 1.630 2.598 • •
M772BCR20L45R/L 1.772 45.0 .0079 0.20 .135 .0197 .273 .226 22 8 1.827 2.795 • •
M772BER20L45R** 1.772 45.0 .0079 0.20 .135 .0197 .273 .226 22 8 1.827 2.795 • •
M772BCR20L50R/L 1.969 50.0 .0079 0.20 .135 .0197 .273 .226 22 8 2.024 2.992 • •
** LH Tools are available upon request.
| • In stock ° Available upon request
| Inserts marked with E are available with edge prep.
169
Boring
Boring MX Boring MC422R05L09R
D min
Internal L ref
d
F
A
L1
b
DETAIL A
80
a 8 0
ß°
F L1
S max
L2 ref
A b S max
R
α°
a F R
L1
* L2 Ref: Repeatability within +/-.0008" (+/-.02mm) L2 ref | Right hand shown
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grade
L1 R L2 ref*
d D min. RH F S max a b α° β° L ref VBX VTX
Inch mm Inch mm inch mm
MX410BCR10L04R .157 4 .0039 0.10 .018 .004 .037 .028 .472 12 1.141 • •
OLD.039"
Boring
(1.0mm)
MX410BCR10L06R .236 6 .0039 0.10 .018 .004 .037 .028 .472 12 1.141 • •
.067" (1.7mm) MX417BCR10L06R .236 6 .0039 0.10 .028 .008 .059 .046 .472 12 1.141 • •
.087" (2.2mm)
MX422BCR10L06R .236 6 .0039 0.10 .037 .008 .077 .061 .472 12 1.141 • •
MX422BCR10L09R .354 9 .0039 0.10 .037 .008 .077 .061 .472 12 1.141 • •
.157" .106" (2.7mm) MX427BCR15L10R .394 10 .0059 0.15 .047 .008 .096 .081 .472 12 1.141 • •
(4.0mm) MX432BCR15L10R .394 10 .0059 0.15 .057 .008 .116 .100 .472 12 1.141 • •
.126" (3.2mm) MX432BCR15L15R .591 15 .0059 0.15 .057 .008 .116 .100 .669 17 1.339 • •
MX432BCR15L20R .787 20 .0059 0.15 .057 .008 .116 .100 .866 22 1.535 • •
MX442BCR15L10R .394 10 .0059 0.15 .077 .012 .156 .136
20 8
.472 12 1.141 • •
.165" (4.2mm) MX442BCR15L15R .591 15 .0059 0.15 .077 .012 .156 .136 .669 17 1.338 • •
MX442BCR15L20R .787 20 .0059 0.15 .077 .012 .156 .136 .866 22 1.535 • •
MX552BCR20L10R .394 10 .0079 0.20 .096 .020 .195 .167 .472 12 1.372 • •
.197"
(5.0mm)
.205" (5.2mm) MX552BCR20L20R .787 20 .0079 0.20 .096 .020 .195 .167 .866 22 1.765 • •
MX552BCR20L30R 1.181 30 .0079 0.20 .096 .020 .195 .167 .866 22 2.159 • •
MX662BCR20L15R .591 15 .0079 0.20 .116 .020 .234 .205 .669 17 1.603 • •
.236"
(6.0mm)
.244" (6.2mm) MX662BCR20L20R .787 20 .0079 0.20 .116 .020 .234 .205 .866 22 1.800 • •
MX662BCR20L25R .984 25 .0079 0.20 .116 .020 .234 .205 1.063 27 1.996 • •
.276"
.283" (7.2mm)
MX772BCR20L25R .984 25 .0079 0.20 .136 .020 .274 .244 1.063 27 2.031 • •
(7.0mm) MX772BCR20L40R 1.575 40 .0079 0.20 .136 .020 .274 .244 1.654 42 2.621 • •
| LH Tools are available upon request.
| In stock ° Available upon request
•
170
Boring with
Boring with Cip
Chip Breaker
Breaker with High Pressure Coolant
Internal L ref
D min
D min
L ref
A b
DETAIL A
A b
a
DETAIL
ß° A
a F L1 ß°
L2 ref
S max
F L1
A b
α°
L2 ref
α°
S max
a A b
α°
α°
a
R
F
* L2 Ref: Repeatability within +/- .0008" (0.02mm)
L1 | Right hand shown
L2 ref R
F
L1
L2 ref
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
L1 R
d D min. RH/LH F S max a b α° β° L2 ref* L ref VBX VTX
Inch mm Inch mm
.157"
(4.0mm)
.165" (4.2mm) M442BCBR15L20RC .787 20.0 .0059 0.15 .077 .0118 .156 .123 21 8 .898 1.567 • •
.197"
M552BCBR20L15RC .591 15.0 .0079 0.20 .096 .0197 .194 .159 21 8 .715 1.614 • •
.205" (5.2mm)
(5.0mm)
M552BCBR20L25RC .984 25.0 .0079 0.20 .096 .0197 .194 .159 21 8 1.108 2.008 • •
.236"
(6.0mm)
.244" (6.2mm) M662BCBR20L30RC 1.181 30.0 .0079 0.20 .115 .0197 .233 .186 22 8 1.272 2.205 • •
| • In stock ° Available upon request
| All tools are available in LH upon request.
171
Boring
Boring with
with ChipCip Breaker
Breaker
D min
D min
Internal L ref L ref
A A b b
DETAIL
DETAIL
A A
Figure 1: M...
a a
ß° ß°
F F L1 L1
L2 refL2 ref
S max
S max
A A b b
α°
α°
α°
α°
Figure 2: MC...
a a
R R
F F
L1 L1
* L2 Ref: Repeatability within +/- .0008" (0.02mm) L2 refL2 ref | Right hand shown
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grade
L1 R
d D min. RH F S max a b α° β° L2 ref* L ref VBX VTX
Inch mm Inch mm
.087" (2.2mm) MC422BCBR10L14R .551 14.0 .0039 0.10 .041 .008 .080 .069 18 8 .717 1.386 • •
.106" (2.7mm)
MC427BCBR15L15R .591 15.0 .0059 0.15 .048 .008 .097 .081 18 8 .717 1.386 • •
MC427BCBR05L15R .591 15.0 .0020 0.05 .048 .008 .097 .081 18 8 .717 1.386 • •
MC432BCBR05L15R .591 15.0 .0020 0.05 .056 .008 .114 .096 18 8 .717 1.386 • •
.126" (3.2mm)
MC432BCBR15L15R .591 15.0 .0059 0.15 .056 .008 .114 .096 18 8 .717 1.386 • •
MC432BCBR05L20R .787 20.0 .0020 0.05 .056 .008 .114 .096 18 8 .898 1.567 • •
.157" MC432BCBR15L20R .787 20.0 .0059 0.15 .056 .008 .114 .096 18 8 .898 1.567 • •
(4.0mm)
.146" (3.7mm)
MC437BCBR15L15R .591 15.0 .0059 0.15 .070 .008 .137 .120 18 8 .717 1.386 • •
MC437BCBR15L20R .787 20.0 .0059 0.15 .070 .008 .137 .120 18 8 .898 1.567 • •
M442BCBR15L12R .472 12.0 .0059 0.15 .077 .012 .156 .123 21 8 .598 1.268 • •
M442BCBR05L15R .591 15.0 .0020 0.05 .077 .012 .156 .123 21 8 .717 1.386 • •
.165" (4.2mm) M442BCBR15L15R .591 15.0 .0059 0.15 .077 .012 .156 .123 21 8 .717 1.386 • •
M442BCBR05L20R .787 20.0 .0020 0.05 .077 .012 .156 .123 21 8 .898 1.567 • •
M442BCBR15L20R .787 20.0 .0059 0.15 .077 .012 .156 .123 21 8 .898 1.567 • •
.197"
.205" (5.2mm)
M552BCBR20L20R .787 20.0 .0079 0.20 .096 .020 .194 .159 21 8 .911 1.811 • •
(5.0mm) M552BCBR20L25R .984 25.0 .0079 0.20 .096 .020 .194 .159 21 8 1.108 2.008 • •
.236"
.244" (6.2mm)
M662BCBR20L30R 1.181 30.0 .0079 0.20 .115 .020 .233 .186 22 8 1.272 2.205 • •
(6.0mm) M662BCBR20L35R 1.378 35.0 .0079 0.20 .115 .020 .233 .186 22 8 1.469 2.402 • •
.276"
.283" (7.2mm)
M772BCBR20L40R 1.575 40.0 .0079 0.20 .135 .020 .273 .226 22 8 1.630 2.598 • •
(7.0mm) M772BCBR20L45R 1.772 45.0 .0079 0.20 .135 .020 .273 .226 22 8 1.827 2.795 • •
| LH Tools are available upon request.
| In stock ° Available upon request
•
172
Boring with Chip Former with High Pressure Coolant
Internal
D min
L ref
d
A DETAIL A
b
ß°
S max
a
F
α°
L1
L2 ref R
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
L1 R
d D min. RH/LH F S max a b α° β° L2 ref* L ref VBX VTX
Inch mm Inch mm
.157" (4.0mm) .165" (4.2mm) M442BCFR15L10RC .394 10.0 .0059 0.15 .073 .0020 .152 .132 7.5 6 .453 1.122 • •
| In stock ° Available upon request
•
| All tools are available in LH upon request.
173
Boring with Chip Former
Internal
D min
L ref
d
A DETAIL A
b
ß°
S max
a
F
α°
L1
L2 ref R
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grade
L1 R
d D min. RH F S max a b α° β° L2 ref* L ref VBX VTX
Inch mm Inch mm
MS442BCFR15L10R .394 10 .0059 0.15 .073 .0020 .152 .132 9.47 6 .453 1.122 • •
MS442BCFR15L10L .394 10 .0059 0.15 .073 .0020 .152 .132 9.47 6 .453 1.122 • •
M442BCFR20L10R .394 10 .0079 0.20 .073 .0020 .152 .132 9.47 6 .453 1.122 • •
.157"
(4.0mm)
.165" (4.2mm) MS442BCFR15L15R .591 15 .0059 0.15 .073 .0020 .152 .132 9.47 6 .717 1.386 • •
MS442BCFR15L15L .591 15 .0059 0.15 .073 .0020 .152 .132 9.47 6 .717 1.386 • •
MS442BCFR15L20R .787 20 .0059 0.15 .073 .0020 .152 .132 9.47 6 .898 1.567 • •
MS442BCFR15L20L .787 20 .0059 0.15 .073 .0020 .152 .132 9.47 6 .898 1.567 • •
M552BCFR20L10R .394 10 .0079 0.20 .093 .0020 .191 .167 9.47 6 .478 1.378 • •
M552BCFR20L15R .591 15 .0079 0.20 .093 .0020 .191 .167 9.47 6 .715 1.614 • •
.197"
.205" (5.2mm)
M552BCFR20L20R .787 20 .0079 0.20 .093 .0020 .191 .167 9.47 6 .911 1.811 • •
(5.0mm) M552BCFR20L20L .787 20 .0079 0.20 .093 .0020 .191 .167 9.47 6 .911 1.811 • •
M552BCFR20L25R .984 25 .0079 0.20 .093 .0020 .191 .167 9.47 6 1.108 2.008 • •
M552BCFR20L30R 1.181 30 .0079 0.20 .093 .0020 .191 .167 9.47 6 1.266 2.165 • •
M662BCFR20L15R .591 15 .0079 0.20 .112 .0020 .230 .201 9.47 6 .720 1.654 • •
M662BCFR20L20R .787 20 .0079 0.20 .112 .0020 .230 .201 9.47 6 .917 1.850 • •
M662BCFR20L20L .787 20 .0079 0.20 .112 .0020 .230 .201 9.47 6 .917 1.850 • •
.236"
(6.0mm)
.244" (6.2mm) M662BCFR20L25R .984 25 .0079 0.20 .112 .0020 .230 .201 9.47 6 1.114 2.047 • •
M662BCFR20L30R 1.181 30 .0079 0.20 .112 .0020 .230 .201 9.47 6 1.272 2.205 • •
M662BCFR20L30L 1.181 30 .0079 0.20 .112 .0020 .230 .201 9.47 6 1.272 2.205 • •
M662BCFR20L35R 1.378 35 .0079 0.20 .112 .0020 .230 .201 9.47 6 1.469 2.402 • •
M772BCFR20L15R .591 15 .0079 0.20 .134 .0020 .272 .240 9.47 6 .646 1.614 • •
M772BCFR20L20R .787 20 .0079 0.20 .134 .0020 .272 .240 9.47 6 1.039 2.008 • •
.276"
.283" (7.2mm)
M772BCFR20L25R .984 25 .0079 0.20 .134 .0020 .272 .240 9.47 6 1.039 2.008 • •
(7.0mm) M772BCFR20L30R 1.181 30 .0079 0.20 .134 .0020 .272 .240 9.47 6 1.433 2.402 • •
M772BCFR20L35R/L 1.378 35 .0079 0.20 .134 .0020 .272 .240 9.47 6 1.433 2.402 • •
M772BCFR20L40R 1.575 40 .0079 0.20 .134 .0020 .272 .240 9.47 6 1.630 2.598 • •
| LH Tools are available upon request.
| In stock ° Available upon request
•
174
Boring 20°
b
A
DETAIL A
Figure 1: M... a
ß°
F
L1
S max
L2 ref
α°
b
R
Figure 2: MC... a
F L1
* L2 Ref: Repeatability within +/- .0008" (0.02mm) | Right hand shown
L2 ref
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
L1 R
d D min. RH/LH F S max a b α° β° L2 ref L ref VBX VTX
Inch mm Inch mm
.087" (2.2mm) MC422B20R10L09R .354 9.0 .0039 0.1 .037 .0079 .077 .061 20 20 .453 1.120 • •
MC427B20R15L10R .394 10.0 .0059 0.15 .047 .0079 .096 .081 20 20 .453 1.120 • •
.106" (2.7mm) MC427B20R15L16R .630 16.0 .0059 0.15 .047 .0079 .096 .081 20 20 .717 1.390 • •
.157" MC427B20R15L16L .630 16.0 .0059 0.15 .047 .0079 .096 .081 20 20 .717 1.390 • •
(4.0mm)
.126" (3.2mm)
MC432B20R15L10R .394 10.0 .0059 0.15 .057 .0079 .116 .100 20 20 .453 1.120 • •
MC432B20R15L16R/L .630 16.0 .0059 0.15 .057 .0079 .116 .100 20 20 .717 1.390 • •
.165" (4.2mm)
M442B20R15L16R .630 16.0 .0059 0.15 .077 .0118 .156 .136 20 20 .717 1.390 • •
M442B20R15L21R/L .827 21.0 .0059 0.15 .077 .0118 .156 .136 20 20 .898 1.570 • •
| In stock ° Available upon request
•
| All tools are available in LH upon request.
Boring 90°
Internal D min
L ref
A b
A b
α°
Figure 2: MC... a
R
F L1
* L2 Ref: Repeatability within +/- .0008 (0.02mm) L2 ref | Right hand shown
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
L1 R
d D min. RH/LH F S max a b α° β° L2 ref L ref VBX VTX
Inch mm Inch mm
.126" (3.2mm)
MC432B90R15L10R .394 10.0 .0059 0.15 .056 .0079 .114 .096 18 0 .453 1.120 • •
.157"
(4.0mm)
MC432B90R15L10L .394 10.0 .0059 0.15 .056 .0079 .114 .096 18 0 .453 1.120 • •
.165" (4.2mm) M442B90R15L16R/L .630 16.0 .0059 0.15 .077 .0118 .156 .136 20 0 .717 1.390 • •
.217" (5.5mm) M552B90R20L10R/L .394 10.0 .0079 0.20 .096 .0197 .194 .165 20 0 .478 1.380 • •
.197"
(5.0mm) .205" (5.2mm)
M552B90R20L16R/L .630 16.0 .0079 0.20 .096 .0197 .194 .165 20 0 .715 1.610 • •
M552B90R20L21R/L .827 21.0 .0079 0.20 .096 .0197 .194 .165 20 0 .911 1.810 • •
| • In stock ° Available upon request
175
Boring & Profiling with Chip Breaker
& High Pressure Coolant (CBLF)
Internal D min
L ref
A
b
DETAIL A
ß°
S max
F L1
α°
L2 ref
R
* L2 Ref: Repeatability within +/- .0008" (0.02mm) | Right hand shown
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
L1 R
d D min. RH/LH F S max a b α° β° L2 ref* L ref VBX VTX
Inch mm Inch mm
M442CBLFR15 L10R/LC .394 10.0 .0059 0.15 .075 .0276 .154 .122 47 3 .453 1.122 • •
.157"
(4.0mm)
.165" (4.2mm) M442CBLFR15L16R/LC .630 16.0 .0059 0.15 .075 .0276 .154 .122 47 3 .717 1.386 • •
M442CBLFR15L21R/LC .827 21.0 .0059 0.15 .075 .0276 .154 .122 47 3 .898 1.567 • •
.197"
.205" (5.2mm)
M552CBLFR20L16R/LC .630 16.0 .0079 0.20 .094 .0374 .193 .150 49 3 .715 1.614 • •
(5.0mm) M552CBLFR20L25R/LC .984 25.0 .0079 0.20 .094 .0374 .193 .150 49 3 1.108 2.008 • •
M662CBLFR20L16R/LC .630 16.0 .0079 0.20 .109 .0689 .228 .154 49 3 .720 1.654 • •
.236"
(6.0mm)
.244" (6.2mm) M662CBLFR20L21R/LC .827 21.0 .0079 0.20 .109 .0689 .228 .154 49 3 .917 1.850 • •
M662CBLFR20L30R/LC 1.181 30.0 .0079 0.20 .109 .0689 .228 .154 49 3 1.272 2.205 • •
| In stock ° Available upon request
•
| All tools are available in LH upon request.
176
Copy (Long Nose)
Boring & Profiling (CL) with High Pressure Coolant
Internal L ref
D min
L1
A b DETAIL A
3°
ß°
470
S max
47°
α°
F L1
S max
L2 ref R
old Copy (Long Nose)
Shank Dia. Min. Bore Dia.
* L2 Ref: Repeatability within +/- .0008" (0.02mm)
A b L1 A
DETAIL
3°
ß°
a
470
S max
α°
L1 47°
F
S max
L2 ref R
old Copy (Long Nose) R
L1
* L2 Ref: Repeatability within +/- .0008" (0.02mm) | Right hand shown
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
L1 R
d D min. RH/LH F S max a b α° β° L2 ref L ref VBX VTX
Inch mm Inch mm
MS442CLR10L10R .394 10.0 .0039 0.10 .075 .0276 .154 .122 47 3 .453 1.120 • •
MS442CLR15L10R .394 10.0 .0059 0.15 .075 .0276 .154 .122 47 3 .453 1.120 • •
.157"
.165" (4.2mm)
MS442CLR15L10L .394 10.0 .0059 0.15 .075 .0276 .154 .122 47 3 .453 1.120 • •
(4.0mm) MS442CLR15L16R/L .630 16.0 .0059 0.15 .075 .0276 .154 .122 47 3 .717 1.390 • •
MS442CLR15L21R .827 21.0 .0059 0.15 .075 .0276 .154 .122 47 3 .898 1.570 • •
MS442CLR15L21L .827 21.0 .0059 0.15 .075 .0276 .154 .122 47 3 .898 1.570 • •
M552CLR07L07R .276 7.0 .0028 0.07 .094 .0374 .193 .148 49 3 .478 1.380 • •
M552CLR20L16R .630 16.0 .0079 0.20 .094 .0374 .193 .150 49 3 .715 1.610 • •
.197"
(5.0mm)
.205" (5.2mm) M552CLR20L16L .630 16.0 .0079 0.20 .094 .0374 .193 .150 49 3 .715 1.610 • •
M552CLR20L25R .984 25.0 .0079 0.20 .094 .0374 .193 .150 49 3 1.108 2.010 • •
M552CLR20L25RL .984 25.0 .0079 0.20 .094 .0374 .193 .150 49 3 1.108 2.010 • •
M662CLR10L16R .630 16.0 .0039 0.10 .109 .0689 .228 .154 49 3 .720 1.650 • •
M662CLR20L16R .630 16.0 .0079 0.20 .109 .0689 .228 .154 49 3 .720 1.650 • •
.236"
(6.0mm)
.244" (6.2mm) M662CLR20L16L .630 16.0 .0079 0.20 .109 .0689 .228 .154 49 3 .720 1.570 • •
M662CLR20L21R/L .827 21.0 .0079 0.20 .109 .0689 .228 .154 49 3 .917 1.850 • •
M662CLR20L30R/L 1.181 30.0 .0079 0.20 .109 .0689 .228 .154 49 3 1.272 2.210 • •
| • In stock ° Available upon request
| All tools are available in LH upon request.
177
Back Boring
Back Boring
Internal D min
L ref
L1
A b DETAIL A
a ß°
F
L3
L2 ref
α°
R
S max
* L2 Ref: Repeatability within +/-.03" | Right hand shown
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
L1 R
d D min. RH/LH F S max a b α° β° L2 ref* L3 L ref VBX VTX
Inch mm Inch mm
.157" (4.0mm) .165" (4.2mm) M442BBR15L25R/L .984 25.0 .0059 0.15 .077 .0315 .156 .102 30 6 1.039 .091 1.799 • •
.197" (5.0mm) .205" (5.2mm) M552BBR15L30R/L 1.181 30.0 .0059 0.15 .096 .0394 .195 .150 30 7 1.175 .091 2.165 • •
.236" (6.0mm) .244" (6.2mm) M662BBR15L30R/L 1.181 30.0 .0059 0.15 .116 .0709 .234 .157 30 7 1.173 .096 2.205 • •
.276" (7.0mm) .283" (7.2mm) M772BBR15L30R/L 1.181 30.0 .0059 0.15 .136 .0984 .274 .169 30 7 1.339 .096 2.402 • •
| In stock ° Available upon request
•
| All tools are available in LH upon request. CH
Boring & Chamfering 45°
Internal
D min
L ref
b DETAIL A
A
S max
a
α°
typ
e
L1
F R
L2 ref
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
L1 R
d D min. RH/LH F S max a b α° L2 ref* L ref VBX VTX
Inch mm Inch mm
.157"
(4.0mm)
.165" (4.2mm) MS442CH4545L15R/L .591 15.0 .0079 0.2 .077 .0276 .156 .110 45 .724 1.394 • •
.197"
.205" (5.2mm)
M552CH4545L15R/L .591 15.0 .0079 0.2 .096 .0276 .195 .146 45 .722 1.622 • •
(5.0mm) M552CH4545L20R/L .787 20.0 .0079 0.2 .096 .0276 .195 .146 45 .919 1.819 • •
.236"
.244" (6.2mm)
M662CH4545L20R/L .787 20.0 .0079 0.2 .116 .0276 .234 .157 45 .925 1.858 • •
(6.0mm) M662CH4545L25R/L .984 25.0 .0079 0.2 .116 .0276 .234 .157 45 1.122 2.055 • •
.276"
.283" (7.2mm)
M772CH4545L20R/L .787 20.0 .0079 0.2 .136 .0276 .274 .167 45 1.047 2.016 • •
(7.0mm) M772CH4545L40R/L 1.575 40.0 .0079 0.2 .136 .0276 .274 .167 45 1.638 2.606 • •
| In stock ° Available upon request
•
| All tools are available in LH upon request.
178
Square Grooving with High Pressure Coolant
Internal
D min
L ref
L
F
d
b t max
W
L1
d
a
F
t max
R w
L1
L2 ref
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
W±.025 L1
d D min. RH/LH t max F R a b L2 ref* L ref VBX VTX
Inch mm Inch mm
OLD M442GSW100L10RC** .039 1.0 .031 .394 10.0 .075 .0039 .154 .114 .453 1.122 • •
.157"
(4.0mm)
.165" (4.2mm) M442GSW100L15RC** .039 1.0 .031 .591 15.0 .075 .0039 .154 .114 .717 1.386 • •
M442GSW100L20RC** .039 1.0 .031 .787 20.0 .075 .0039 .154 .114 .898 1.567 • •
M552GSW100L10RC** .039 1.0 .039 .394 10.0 .094 .0039 .193 .146 .478 1.378 • •
.197"
.205" (5.2mm)
M552GSW100L15RC** .039 1.0 .039 .591 15.0 .094 .0039 .193 .146 .715 1.614 • •
(5.0mm) M552GSW150L15RC** .059 1.5 .039 .591 15.0 .094 .0039 .193 .146 .715 1.614 • •
M552GSW150L20RC** .059 1.5 .039 .787 20.0 .094 .0039 .193 .146 .911 1.811 • •
** LH Tools are available upon request.
| In stock ° Available upon request
•
| Inserts marked with C are available with internal coolant.
179
Square Grooving
Internal
D min
L ref
L
b
F
d
t max
d
W
a
F
L1
t max
R w
L1
L2 ref
180
Square Grooving (con't)
Shank Min. Bore Dia. Ordering Code Dimensions Inch Grades
Dia.
W±.025 L1
d D min. RH/LH t max F R a b L2 ref* L ref VBX VTX
Inch mm Inch mm
M662GSW117L15R** .046 1.17 .071 .591 15.0 .117 .0039 .235 .157 .720 1.654 • •
M662GSW150L15R/L .059 1.50 .071 .591 15.0 .114 .0039 .232 .157 .720 1.654 • •
M662GSW157L15R** .062 1.57 .071 .591 15.0 .117 .0039 .235 .157 .720 1.654 • •
M662GSW198L15R** .078 1.98 .071 .591 15.0 .117 .0039 .235 .157 .720 1.654 • •
M662GSW200L15R .079 2.00 .071 .591 15.0 .114 .0039 .232 .157 .720 1.654 • •
M662GSW200L15L .079 2.00 .071 .591 15.0 .114 .0039 .232 .157 .720 1.654 • •
M662GSW100L20R .039 1.00 .071 .787 20.0 .114 .0039 .232 .157 .917 1.850 • •
M662GSW100L20L .039 1.00 .071 .787 20.0 .114 .0039 .232 .157 .917 1.850 • •
M662GSW150L20R/L .059 1.50 .071 .787 20.0 .114 .0039 .232 .157 .917 1.850 • •
M662GSW200L20R .079 2.00 .071 .787 20.0 .114 .0039 .232 .157 .917 1.850 • •
M662GSW200L20L .079 2.00 .071 .787 20.0 .114 .0039 .232 .157 .917 1.850 • •
M662GSW079L25R** .031 0.79 .071 .984 25.0 .117 .0039 .235 .157 1.114 2.047 • •
.236"
(6.0mm)
.244" (6.2mm) M662GSW100L25R .039 1.00 .071 .984 25.0 .114 .0039 .232 .122 1.272 2.205 • •
M662GSW117L25R** .046 1.17 .071 .984 25.0 .117 .0039 .235 .157 1.114 2.047 • •
M662GSW157L25R** .062 1.57 .071 .984 25.0 .117 .0039 .235 .157 1.114 2.047 • •
M662GSW198L25R** .078 1.98 .071 .984 25.0 .117 .0039 .235 .157 1.114 2.047 • •
M662GSW200L25R .079 2.00 .071 .984 25.0 .114 .0039 .232 .126 1.272 2.205 • •
M665GSW350L25R .138 3.50 .071 .984 25.0 .117 .0039 .235 .157 1.114 2.047 • •
M662GSW100L30R/L .039 1.00 .071 1.181 30.0 .114 .0039 .232 .157 1.272 2.205 • •
M662GSW150L30R/L .059 1.50 .071 1.181 30.0 .114 .0039 .232 .157 1.272 2.205 • •
M662GSW200L30R/L .079 2.00 .071 1.181 30.0 .114 .0039 .232 .157 1.272 2.205 • •
M662GSW079L35R** .031 0.79 .071 1.378 35.0 .117 .0039 .235 .157 1.469 2.402 • •
M662GSW117L35R** .046 1.17 .071 1.378 35.0 .117 .0039 .235 .157 1.469 2.402 • •
M662GSW150L35R .059 1.50 .071 1.378 35.0 .116 .0039 .232 .156 1.469 2.356 • •
M662GSW157L35R** .062 1.57 .071 1.378 35.0 .117 .0039 .235 .157 1.469 2.402 • •
M762GSW250L15R .098 2.50 .098 .591 15.0 .134 .0039 .272 .161 .720 1.654 • •
M772GSW079L10R** .031 0.79 .098 .394 10.0 .136 .0039 .274 .161 .449 1.417 • •
M772GSW100L10R/L .039 1.00 .098 .394 10.0 .134 .0039 .272 .161 .449 1.417 • •
M772GSW150L10R/L .059 1.50 .098 .394 10.0 .134 .0039 .272 .161 .449 1.417 • •
M772GSW200L10R/L .079 2.00 .098 .394 10.0 .134 .0039 .272 .161 .449 1.417 • •
M772GSW600L10R .236 6.00 .098 .394 10.0 .126 .0039 .272 .161 .449 1.417 • •
M772GSW079L15R** .031 0.79 .098 .591 15.0 .136 .0039 .274 .161 .646 1.614 • •
M772GSW100L15R** .039 1.00 .098 .591 15.0 .134 .0039 .272 .161 .646 1.614 • •
M772GSW117L15R** .046 1.17 .098 .591 15.0 .136 .0039 .274 .161 .646 1.614 • •
M772GSW150L15R/L .059 1.50 .098 .591 15.0 .134 .0039 .272 .161 .646 1.614 • •
M772GSW157L15R** .062 1.57 .098 .591 15.0 .136 .0039 .274 .161 .646 1.614 • •
M772GSW198L15R** .078 1.98 .098 .591 15.0 .136 .0039 .274 .161 .646 1.614 • •
.276"
(7.0mm)
.283" (7.2mm) M772GSW200L15R/L .079 2.00 .098 .591 15.0 .134 .0039 .272 .161 .646 1.614 • •
M772GSW150L16R .059 1.50 .098 .630 16.0 .134 .0039 .272 .161 .685 1.654 • •
M772GSW079L20R** .031 0.79 .098 .787 20.0 .136 .0039 .274 .161 1.039 2.008 • •
M772GSW117L20R** .046 1.17 .098 .787 20.0 .136 .0039 .274 .161 1.039 2.008 • •
M772GSW157L20R** .062 1.57 .098 .787 20.0 .136 .0039 .274 .161 1.039 2.008 • •
M772GSW198L20R** .078 1.98 .098 .787 20.0 .136 .0039 .274 .161 1.039 2.008 • •
M772GSW150L20R .059 1.50 .098 .787 20.0 .134 .0039 .272 .161 1.039 1.811 • •
M772GSW100L25R** .039 1.00 .098 .984 25.0 .134 .0039 .272 .161 1.039 2.008 • •
M772GSW150L25R/L .059 1.50 .098 .984 25.0 .134 .0039 .272 .161 1.039 2.008 • •
M772GSW200L25R/L .079 2.00 .098 .984 25.0 .134 .0039 .272 .161 1.039 2.008 • •
M772GSW100L35R** .039 1.00 .098 1.378 35.0 .134 .0039 .272 .161 1.433 2.402 • •
M772GSW150L35R/L .059 1.50 .098 1.378 35.0 .134 .0039 .272 .161 1.433 2.402 • •
M772GSW200L35R/L .079 2.00 .098 1.378 35.0 .134 .0039 .272 .161 1.433 2.402 • •
** LH Tools are available upon request.
| • In stock ° Available upon request
181
Round Groove
Round Grooving
Internal L ref
D min
L
Pre-Part Off
b
d
a
F
w
t max
R t max
F R
L1
L1
* L2 Ref: Repeatability within +/- .0008" (0.02mm) L2 ref | Right hand shown
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
W±.025 L1
d D min. RH/LH t max F R a b L2 ref* L ref VBX VTX
Inch mm Inch mm
.157"
(4.0mm)"
.165" (4.2mm) MS442GRR050L15R/L .039 1.0 .031 .591 15.000 .077 .0197 .156 .110 .717 1.386 • •
M552GRR050L20R** .039 1.0 .039 .787 20.000 .096 .0197 .195 .146 .911 1.811 • •
.197"
.205" (5.2mm)
M552GRR050L20L .039 1.0 .039 .787 20.000 .096 .0197 .195 .146 .911 1.811 • •
(5.0mm)" M552GRR075L20R/L .059 1.5 .039 .787 20.000 .096 .0295 .195 .146 .911 1.811 • •
M552GRR100L20R/L .079 2.0 .039 .787 20.000 .096 .0394 .195 .146 .911 1.811 • •
M662GRR100L05R ** .079 2.0 .063 .197 5.000 .116 .0394 .234 .157 .720 1.654 • •
M662GRR050L15R ** .039 1.0 .063 .591 15.000 .116 .0197 .234 .157 .720 1.654 • •
.236"
(6.0mm)"
.244" (6.2mm) M662GRR050L25R/L .039 1.0 .071 .984 25.000 .116 .0197 .234 .157 1.114 2.047 • •
M662GRR075L25R/L .059 1.5 .071 .984 25.000 .116 .0295 .234 .157 1.114 2.047 • •
M662GRR100L25R/L .079 2.0 .071 .984 25.000 .116 .0394 .234 .157 1.114 2.047 • •
old
.276" RoundM772GRR050L30R
Groove ** .039 1.0 .098 1.181 30.000 .136 .0197 .274 .163 1.433 2.008 • •
.283" (7.2mm)
(7.0mm) M772GRR100L30R** .079 2.0 .098 1.181 30.000 .136 .0394 .274 .161 1.433 2.402 • •
** LH Tools are available upon request.
| • In stock ° Available upon request
Pre-Part Off
D min
Internal L ref
d
b
L1
d
a
F
t t max
w
L1
F ref
L2
* L2 Ref: Repeatability within +/- .0008" (0.02mm) | Right hand shown
t t max
W
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
L1 •
W±.025 W±.025
d D min. RH/LH t max F t a b L2 ref* L ref VBX VTX
Inch mm Inch mm
M552PPW100L15R/L .039 1.0 .028 .591 15.000 .096 .012 .194 .153 .715 1.614 •
M552PPW100L20R/L .039 1.0 .028 .787 20.000 .096 .012 .194 .153 .911 1.811 • •
.197"
(5.0mm)
.205" (5.2mm) M552PPW100L20RC** .039 1.0 .028 .787 20.000 .096 .012 .194 .153 .911 1.811 • •
M552PPW100L25R/L .039 1.0 .028 .984 25.000 .096 .012 .194 .153 1.108 2.008 • •
M552PPW100L30R** .039 1.0 .028 1.181 30.000 .096 .012 .194 .153 1.266 2.165 • •
** LH Tools are available upon request.
| • In stock ° Available upon request
182
Face Grooving with High Pressure Coolant
D min
L ref
D min D min
Internal L ref L ref
Min.
Bore t max b
Dia. t max t max b b
d
a
d
a a W
F L1
* L2 Ref: Repeatability within +/- .0008" (0.02mm) W W | Right hand shown
F F
R x2 L1 L2
L1 ref
R x2 R x2 L2 ref L2 ref
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
W±.025 L1
d D min. RH/LH t max F R a b L2 ref* L ref VBX VTX
Inch mm Inch mm
M680FGW10L15R/LC .039 1.00 .079 .591 15.0 .110 .004 .228 .219 .720 1.654 • •
M680FGW117L15R/LC .046 1.17 .079 .591 15.0 .110 .006 .228 .219 .720 1.654 • •
M680FGW15L15R/LC .059 1.50 .118 .591 15.0 .110 .004 .228 .219 .720 1.654 • •
M680FGW157L15R/LC .062 1.57 .118 .591 15.0 .110 .006 .228 .219 .720 1.654 • •
.236"
.315" (8mm)
M680FGW198L15R/LC .078 1.98 .157 .591 15.0 .110 .006 .228 .219 .720 1.654 • •
(6.0mm) M680FGW20L15R/LC .079 2.00 .157 .591 15.0 .110 .004 .228 .219 .720 1.654 • •
M680FGW239L15R/LC .094 2.39 .197 .591 15.0 .110 .006 .228 .219 .720 1.654 • •
M680FGW25L15R/LC .098 2.50 .197 .591 15.0 .110 .004 .228 .219 .720 1.654 • •
M680FGW30L15R/LC .118 3.00 .236 .591 15.0 .110 .004 .228 .219 .720 1.654 • •
M680FGW318L15R/LC .125 3.18 .236 .591 15.0 .110 .006 .228 .219 .720 1.654 • •
| • In stock ° Available upon request
D min
External L ref
Min.
Min. Bore Rx2
Diameter Bore L1
Dia. t max
F W
Rx2
L1
t max
F W
a
d
a
d
* L2 Ref: Repeatability within +/- .0008" (0.02mm) L2 ref | Right hand shown
L2 ref
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
W±.025 L1
d D min. RH/LH t max F R a b L2 ref* L ref VBX VTX
Inch mm Inch mm
M680FPW10L15R/LC .039 1.00 .079 .591 15.0 .110 .004 .228 .219 .720 1.654 • •
M680FPW117L15R/LC .046 1.17 .079 .591 15.0 .110 .006 .228 .219 .720 1.654 • •
M680FPW15L15R/LC .059 1.50 .118 .591 15.0 .110 .004 .228 .219 .720 1.654 • •
M680FPW157L15R/LC .062 1.57 .118 .591 15.0 .110 .006 .228 .219 .720 1.654 • •
.236"
.315" (8mm)
M680FPW198L15R/LC .078 1.98 .157 .591 15.0 .110 .006 .228 .219 .720 1.654 • •
(6.0mm) M680FPW20L15R/LC .079 2.00 .157 .591 15.0 .110 .004 .228 .219 .720 1.654 • •
M680FPW239L15R/LC .094 2.39 .197 .591 15.0 .110 .006 .228 .219 .720 1.654 • •
M680FPW25L15R/LC .098 2.50 .197 .591 15.0 .110 .004 .228 .219 .720 1.654 • •
M680FPW30L15R/LC .118 3.00 .236 .591 15.0 .110 .004 .228 .219 .720 1.654 • •
M680FPW318L15R/LC .125 3.18 .236 .591 15.0 .110 .006 .228 .219 .720 1.654 • •
| • In stock ° Available upon request
183
Face Grooving
D min
L ref
Internal D min D min
L ref L ref
Min.
Bore t max b
Dia.
t max t max b b
d
a
d
a a W
F L1
* L2 Ref: Repeatability within +/- .0008" (0.02mm) W R x2 W | Right hand shown
F F L1 L2
L1 ref
R x2 R x2 L2 ref L2 ref
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
W±.025 L1
d D min. RH/LH t max F R a b L2 ref* L ref VBX VTX
Inch mm Inch mm
MN662FGW10L15R/L .039 1.00 .079 .591 15.0 .116 .004 .234 .219 .720 1.654 • •
MN662FGW117L15R/L .046 1.17 .079 .591 15.0 .116 .006 .234 .219 .720 1.654 • •
MN662FGW15L15R/L .059 1.50 .118 .591 15.0 .116 .004 .234 .219 .720 1.654 • •
MN662FGW157L15R/L .062 1.57 .118 .591 15.0 .116 .006 .234 .219 .720 1.654 • •
.236" .244" (6.2mm) MN662FGW198L15R/L .078 1.98 .157 .591 15.0 .116 .006 .234 .219 .720 1.654 • •
(6.0mm) MN662FGW20L15R/L .079 2.00 .157 .591 15.0 .116 .004 .234 .219 .720 1.654 • •
MN662FGW239L15R/L .094 2.39 .197 .591 15.0 .116 .006 .234 .219 .720 1.654 • •
MN662FGW25L15R/L .098 2.50 .197 .591 15.0 .116 .004 .234 .219 .720 1.654 • •
MN662FGW30L15R/L .118 3.00 .236 .591 15.0 .116 .004 .234 .219 .720 1.654 • •
.260" (6.6mm) MN666FGW318L15R/L .125 3.18 .236 .591 15.0 .116 .006 .234 .219 .720 1.654 • •
| • In stock ° Available upon request
Face Grooving L ref
D min
D min
L ref
External
a
d
* L2 Ref: Repeatability within +/- .0008 (0.02mm) L2 ref | Right hand shown
184
Round Face Grooving with High Pressure Coolant
Internal
D min
L ref
Min.
Bore
Dia.
t max b
a d
F w
R L1
L2 ref
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
W±.025 L1
d D min. RH/LH t max F R a b L2 ref* L ref VBX VTX
Inch mm Inch mm
M662FGR050L15R/LC .039 1.00 .079 .591 15.0 .110 .020 .228 .219 .720 1.654 • •
M662FGR080L15R/LC .063 1.60 .118 .591 15.0 .110 .031 .228 .215 .720 1.654 • •
.236"
(6.0mm)
.244" (6.2mm) M662FGR100L15R/LC .079 2.00 .157 .591 15.0 .110 .039 .228 .215 .720 1.654 • •
M662FGR125L15R/LC .098 2.50 .197 .591 15.0 .110 .049 .228 .215 .720 1.654 • •
M662FGR150L15R/LC .118 3.00 .236 .591 15.0 .110 .059 .228 .215 .720 1.654 • •
| • In stock ° Available upon request
Internal
L ref
L ref
S max
D minD min
R
S max
R
F
β°
F
β° L2 ref
L2 ref
Shank Dia. Min. Bore Dia. Ordering Code Dimensions Inch Grades
d D min. RH/LH R F S max L2 ref* L ref VBX VTX
185
Threading
Internal L ref
D min
Helix
d
F
d
Y
R
L1 Y
L2 ref L1
d
a
Y
L1
L2 ref
* L2 Ref: Repeatability within +/- .0008" (0.02mm) | Right hand shown
Y Y Y
Y Y Y
X
Partial Profile 55° r X r X r
Y
X L
Shank Dia. Min. Bore Dia. Ordering Code Pitch Dimensions
X Inch Grades
Internal L1L IC
55° L d D min. L RH/LH L mm a F TPI
Y L2 ref* L ref Helix° VBX VTX
Inch mm
.157" .126" (3.2mm) MS429THF55L16R/L 0.5-1.0 48-24 .630 16.0 .114 .035 .030
IC IC IC r
Y .724 1.394 3.5 • •
External
(4.0mm) .165" (4.2mm) MS439THF55L16R/L 0.5-1.0 48-24 .630 16.0 IC.154 .075 .030 .724 1.394
r
3.5
T • •
.236"
(6.0mm)
.244" (6.2mm) M659THA55L16R/L 0.5-1.0 48-24 .630 16.0 .232 .114 .035 .728 1.661 3.5 • •
| • In stock ° Available upon request
186
Threading
Internal L ref
D min
Helix
F L
a
d
Y F
d
R
L1
Y
L2 ref L1
d
a
Y
L1
L2 ref
* L2 Ref: Repeatability within +/- .0008" (0.02mm) | Right hand shown
ISO Metric Y
Shank Min. Bore Dia. X
Dia. Ordering Code Pitch Dimensions Inch Grades
1/4P Internal L1 h L2
60° Thread d D min. RH/LH mm a F Y L ref Helix° VBX VTX
Inch mm (min) ref*
L
h
M3-M5x.5 .097" (2.46mm) M425TH0.50ISOL08R 0.5 .299 7.6 .087 .077 .016 .023 .512 1.173 3.0 • •
M4x.7 .128" (3.24mm) M432TH0.70ISOL10R IC 0.7 .402 10.2 .116 .077 .024 .011 .512 1.173 3.6 • •
1/8P External M4x.5 .134" (3.4mm) MS429TH0.50ISOL16R/L 0.5 .630 16.0 .114 .035 .016 .011 .724 1.394 3.5 • •
Defined by: R262 (DIN 13)
Tolerance Class: 6g/6H
M5x.5 .157" .173" (4.4mm) MS439TH0.50ISOL16R/L 0.5 .630 16.0 .154 .075 .016 .011 .724 1.394 3.5 • •
M4x.7 (4.0mm) .126" (3.2mm) MS429TH0.70ISOL16R/L 0.7 .630 16.0 .114 .035 .024 .016 .724 1.394 3.5 • •
M4.5-M6x.75 .122" (3.1mm) M429TH0.75ISOL16R 0.75 .630 16.0 .114 .075 .024 .017 .724 1.394 3.5 • •
M5x.8 .158" (4.0mm) MS429TH0.80ISOL16R/L 0.8 .630 16.0 .114 .035 .024 .018 .724 1.394 3.5 • •
M6x1.0 .1890" (4.8mm) MS439TH1.00ISOL16R/L 1.0 .630 16.0 .154 .075 .028 .023 .724 1.394 3.5 • •
M5.5x.5 .193" (4.9mm) M542TH0.50ISOL16R/L 0.5 .630 16.0 .165 .067 .016 .011 .722 1.622 3.5 • •
M5.5x.75
.197"
(5.0mm)
.181" (4.6mm) M542TH0.75ISOL16R/L 0.75 .630 16.0 .165 .067 .024 .017 .722 1.622 3.5 • •
M7x1.0 .228" (5.8mm) M549TH1.00ISOL16R/L 1.0 .630 16.0 .193 .094 .028 .023 .722 1.622 3.5 • •
M6x.5 .213" (5.4mm) M649TH0.50ISOL16R/L 0.5 .630 16.0 .193 .075 .016 .011 .728 1.661 3.5 • •
M6.5x.75 .221" (5.6mm) M649TH0.75ISOL16R/L 0.75 .630 16.0 .193 .075 .024 .017 .728 1.661 3.5 • •
M7.5x1.0
.236"
(6.0mm)
.248" (6.3mm) M659TH1.00ISOL16R/L 1.0 .630 16.0 .232 .114 .028 .023 .728 1.661 3.5 • •
M8x1.25 .256" (6.5mm) M659TH1.25ISOL16R/L 1.25 .630 16.0 .232 .114 .035 .028 .728 1.661 3.5 • •
M10x1.5 .327" (8.3mm) M659TH1.50ISOL16R/L 1.5 .630 16.0 .232 .114 .039 .034 .728 1.661 3.0 • •
| In stock ° Available upon request
•
| All tools are available in LH upon request.
American UN Y
Shank Min. Bore Dia. X
Dia. Ordering Code Pitch Dimensions Inch Grades
1/4P Internal L1 h L2
60° Thread d D min. RH/LH a F TPI
Y L ref Helix ° VBX VTX
Inch mm (min) ref*
L
Defined
h by: ANSI B1.1:74
No.8-32UNC .157" .130" (3.3mm) MS429TH32UNL16R/L 32 .630 16.0 .115 .036 .024 .018 .724 1.394 3.5 • •
Tolerance Class: 2A/2B No.10-28UNS (4.0mm) .142" (3.6mm) MS429TH28UNL16R/L 28 .630 16.0 .114 .036 .026 IC
.020 .724 1.394 3.5 • •
1/8P External 1/4”-27UNS .209" (5.3mm) M549TH27UNL16R** 27 .630 16.0 .193 .094 .030 .021 .722 1.622 3.5 • •
1/4”-24UNS
.197"
(5.0mm)
.201" (5.1mm) M542TH24UNL16R** 24 .630 16.0 .165 .067 .030 .024 .722 1.622 3.5 • •
1/4”-20UNC .181" (4.6mm) M542TH20UNL16R** 20 .630 16.0 .165 .067 .035 .029 .722 1.622 3.5 • •
5/16”-18UNC .236" .248" (6.3mm) M659TH18UNL16R** 18 .630 16.0 .232 .114 .041 .032 .728 1.661 3.5 • •
3/8”-16UNC (6.0mm) .303" (7.7mm) M659TH16UNL16R** 16 .630 16.0 .232 .114 .039 .036 .728 1.661 3.5 • •
** LH Tools are available upon request.
| • In stock ° Available upon request
187
Threading
Internal L ref
D min
Helix
d
F
d
Y R
L1 Y
L2 ref L1
d
a
Y
L1
L2 ref
* L2 Ref: Repeatability within +/- .0008" (0.02mm) | Right hand shown
Y Y
Y
NPT X X
Shank Min. Bore X L
Dia. Dia. Ordering Code Pitch Dimensions XInch Grades
30° 30° Internal
L1 h IC
Thread d D min. RH/LH TPI a F Y L2 ref* L ref Helix ° VBX VTX
h L L L mm
Inch (min)
1/16”-27NPT
.240"
(6.1mm)
IC
M659TH27NPTL16R**
IC
27 .630 16.0 .232 .114 .030 .026
IC
Y .728 1.661 3.5 • •
90° 1°47’
External 1/4”-18NPT
.236" .421"
(6.0mm) (10.7mm)
M659TH18NPTL16R/L 18 .630 16.0 .232 .114 .039 .040 .728 1.661 3.5T • •
Defined by:
USAS B2.1:1968
1/2’’-14NPT
.669"
(17.0mm)
M659TH14NPTL16R** 14 .630 16.0 .232 .114 .041 .052 .728 1.661 3.5 • •
Tolerance Class: ** LH Tools are available upon request.
Standard NPT | • In stock ° Available upon request
Y Y
Trapez X X Y
L
X
Shank Min. Bore Ordering Code Pitch X Dimensions Inch Grades
Dia. Dia.
Internal L1 L IC h
30°
Thread L d D min. L RH/LH TPI a F Y L2 ref* L ref Helix ° VBX VTX
Inch mm (min)
h
TR8-TR10x1.5 .236" .244"
IC
M662TH1.5TRL20R
IC
1.5 .799 20.3 .232 .116 .043
IC
Y .035 .906 1.839 3.3 • •
TR9-TR12x2.0 (6.0mm) (6.2mm) M662TH2.0TRL20R 2.0 .799 20.3 .232 .116 .051 .049 .906 1.839
T
4.0 • •
External
TR10-TR14x2.0 .276" .283" M772TH2.0TRL20R 2.0 .799 20.3 .272 .136 .051 .049 .906 1.839 3.4 • •
Defined by: DIN 103
Tolerance class: 7e/7H
TR11-TR16x3.0 (7.0mm) (7.2mm) M772TH3.0TRL20R 3.0 .799 20.3 .272 .136 .059 .069 .906 1.839 4.75 • •
** LH Tools are available upon request.
| • In stock ° Available upon request
188
microscope Toolholders
V-Cap Holders. . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................. 190
Shrink Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............................................................................. 191
Round Tools without Shoulder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............................................................................. 192
Round Double Sided Tools.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............................................................................. 192
Holder with Round Shank - 4 Flats. . . . . . . . . . . . . . . . . . . . . . .............................................................................. 193
Holder with Round Shank - 2 Flats. . . . . . . . . . . . . . . . . . . . . . .............................................................................. 194
Square Shank Holders.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............................................................................. 195
Drop Head Holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................. 196
V-CAP Holders
MH C S - 4 - C3
1 2 3 5 8
4 - Shank Size 5 - Bore Size 6 - Bore Size for Double Bore 7 - 4 Flats
0375 - .375" 4 - .157" 4 - .157" 4F - Four Flats
0500 - .500" 5 - .197" 5 - .197" None - Two Flats
0625 - .625" 6 - .236" 6 - .236"
0750 - .750" 7 - .276" 7 - .276"
0875 - .875"
1000 - 1.00"
10 - 28mm
189
V-CAP Toolholders
Coolant Holes
L
L1
L2
D
B
Spare Parts
Micro Ordering Code Dimensions Inch
Insert Dia.
d D B H L1 L2 L Shrink Screw* Key
190
Shrink Toolholders
L Coolant Holes
H1 d D
Hx2 A B
A SECTION A-A
191
Round Toolholders without Shoulder
Coolant Holes
L
Dd
B
Hx2 A SECTION A-A
Spare Parts
Micro Ordering Code Dimensions Inch
Insert Dia.
B=D
d H L Clamping Screw* Key
Inch mm
MHCR20-4-4F .787 20.0 .740 3.287
.157" (4.0mm)
MHCR22-4-4F .866 22.0 .787 4.331
MHCR20-5-4F .787 20.0 .740 3.287
.197" (5.0mm)
MHCR22-5-4F .866 22.0 .787 4.331 SLDBT15IP F15IP
MHCR20-6-4F .787 20.0 .740 3.287
.236" (6.0mm)
MHCS22-6-4F .866 22.0 .787 4.331
.276" (7.0mm) MHCR25-7-4F .984 25.0 .787 4.331
L Coolant Holes
Coolant Holes Hx2
d2
d1
A B
SECTION A-A
Spare Parts
Micro Ordering Code Dimensions Inch
Insert Dia.
B=D Clamping
d1 d2 H L Key
Inch mm Screw*
MHCR075-4-5-4F .750 19.05 .701 3.287
MHCR20-4-5-4F .787 20.0 .740 3.287
.157" (4.0mm) .197" (5.0mm)
MHCR22-4-5-4F .866 22.0 .787 4.331
SLDBT15IP F15IP
MHCR25-4-5-4F .984 25.0 .906 4.331
MHCR20-6-7-4F .787 20.0 .740 3.287
.236" (6.0mm) .276" (7.0mm)
MHCR25-6-7-4F .984 25.0 .906 4.331
192
Toolholders with Round Shank - 4 Flats
L Coolant Holes
d H type x 2
.532"
13.5
A SECTION A-A
B D
* Torx+ screw and key are now available for improved clamping.
* Torx+ screw and key are now available for improved clamping.
193
Toolholders with Round Shank - 2 Flats microscope
Coolant Holes
L
d H
H1
.532"
13.5
A SECTION A-A
B D
* Torx+ screw and key are now available for improved clamping.
194
Square Shank Holders
L1
d
H1
H2 H
* Torx+ screw and key are now available for improved clamping.
195
Drop Head Toolholders
D max
h d
H
F
L1
L
L3
b L2
a
* Torx+ screw and key are now available for improved clamping.
196
Groove Turning Accessories
197
Torque Limiters Appendix
198
GROOVE MILLING
GM Solid . . .............................................................................................................. 201
GM Slot . . .............................................................................................................. 207
GR OOVE MIL LIN G
GM Solid
Solid Carbide Groove Milling Tools
for Miniature and Small Bores
GM Solid
Solid Carbide Groove Milling Tools
for Miniature and Small Bores
Ø .118-.393 inch
• Min. bore diameter .236 inch
• 4 flutes
• Width of groove .027-.078 inch
• Depth of groove max .059 inch
202
GM Solid Groove Milling Technical Data
Recommended Grades, Cutting Speeds Vc [ft/min], Feed f [inch/ tooth]
P
Low alloy steel
5 Hardened 275 262-491 .0028-.0079
(alloying elements ≤5%)
Steel 6 Hardened 350 229-458 .0028-.0079
7 High alloy steel Annealed 200 196-425 .0028-.0079
8 (alloying elements >5%) Hardened 325 229-360 .0028-.0079
9 Low alloy (alloying elements <5%) 200 327-556 .0028-.0079
Cast steel
10 High alloy (alloying elements >5%) 225 229-392 .0028-.0079
11 Stainless steel Non hardened 200 327-556 .0028-.0079
12 Ferritic Hardened 330 327-556 .002-.0059
13 Stainless steel Austenitic 180 229-458 .0028-.0079
M
Stainless
14 Austenitic
15 Stainless steel
Super Austenitic
Non hardened
200
200
229-458
229-458
.0028-.0079
.0039-.0079
Steel
16 Cast Ferritic Hardened 330 229-458 .0028-.0079
17 Stainless steel Austenitic 200 229-392 .0028-.0079
18 Cast austenitic Hardened 330 229-392 .0028-.0079
28 Malleable Ferritic (short chips) 130 196-425 .0039-.0087
29 Cast iron Pearlitic (long chips) 230 196-392 .0028-.0079
K
Cast Iron
30
31
Grey cast iron
Low tensile strength
High tensile strength
180
260
196-425
196-327
.0028-.0079
.0028-.0079
32 Ferritic 160 196-409 .0028-.0079
Nodular SG iron
33 Pearlitic 260 164-294 .0028-.0079
34 Aluminium alloys non aging 60 327-818 .0039-.0098
35 Wrought Aged 100 327-589 .0039-.0098
N(K)
Non-Ferrous
36
37
Aluminium alloys
Cast
Cast & aged
75
90
491-1308
491-916
.0039-.0098
.0039-.0098
Metals 38 Aluminium alloys Cast Si 13-22% 130 262-491 .0039-.0098
39 Copper and Brass 90 392-687 .0039-.0098
40 copper alloys Bronze and non leaded copper 100 392-687 .0028-.0087
S(M)
Heat Resistant
23
Titanium alloys
Pure 99.5 Ti 400Rm 229-458 .0028-.0051
203
GM Solid Tools
Square Grooving
Chamfering
204
GM Solid - Square Grooving
L
L2
L
D2 L2 Dh6
D2 Dh6
T
w
T
w
205
GM Solid - Chamfering
L
L2 L
L2
D2 Dh6
D2 Dh6
90 ◦
T
w90 ◦
T
s
w
s
206
GR OOVE MIL LIN G
GM Slot
Square Grooving, Round Grooving
and Chamfering
GM Slot
Groove Milling Tools with 3 corner indexable inserts for internal
and external grooving, threading and chamfering applications
208
GM Slot Groove Milling Technical Data
Recommended Grades, Cutting Speeds Vc [ft/min], Feed f [inch/tooth]
Vargus No.
Hardness
Material Vc Feed f
Material Brinell
Group [ft/min] [inch/tooth]
HB
P
Low alloy steel
5 Hardened 275 262-491 .0028-.0118
(alloying elements ≤5%)
Steel 6 Hardened 350 262-458 .0028-.0098
7 High alloy steel Annealed 200 196-327 .0028-.0118
8 (alloying elements >5%) Hardened 325 164-262 .0028-.0098
9 Low alloy (alloying elements <5%) 200 262-523 .0028-.0098
Cast steel
10 High alloy (alloying elements >5%) 225 196-392 .0028-.0098
11 Stainless steel Non hardened 200 229-425 .0028-.0118
12 Ferritic Hardened 330 196-360 .0016-.0098
13 Stainless steel Austenitic 180 229-425 .0028-.0118
M
Stainless
14 Austenitic
15 Stainless steel
Super Austenitic
Non hardened
200
200
196-392
262-458
.0028-.0098
.0028-.0118
Steel
16 Cast Ferritic Hardened 330 196-327 .0028-.0098
17 Stainless steel Austenitic 200 262-458 .0028-.0118
18 Cast austenitic Hardened 330 196-327 .0028-.0098
28 Malleable Ferritic (short chips) 130 164-229 .0028-.0118
29 Cast iron Pearlitic (long chips) 230 262-458 .0028-.0098
K
Cast Iron
30
31
Grey cast iron
Low tensile strength
High tensile strength
180
260
262-458
196-360
.0028-.0118
.0028-.0098
32 Ferritic 160 196-327 .0028-.0118
Nodular SG iron
33 Pearlitic 260 196-327 .0028-.0118
34 Aluminium alloys Non aging 60 262-981 .0028-.0118
35 Wrought Aged 100 327-818 .0028-.0118
N(K)
Non-Ferrous
36
37
Aluminium alloys
Cast
Cast & aged
75
90
327-654
327-719
.0028-.0118
.0028-.0118
Metals 38 Aluminium alloys Cast Si 13-22% 130 262-981 .0028-.0098
39 Copper and Brass 90 262-981 .0028-.0118
40 copper alloys Bronze and non leaded copper 100 327-654 .0028-.0098
S(M)
Heat Resistant
23
Titanium alloys
Pure 99.5 Ti 400Rm 131-262 .0028-.0051
209
GM Slot Inserts
1 - Insert Size 2 - Insert Style 3 - Type of Application 4 - Groove Width (inch) 5 - Groove Depth (inch)
7 - I.C. .267" V - Style GS - Square Grooving .74 - .029" ---5.15 - .202" 1.50 - .059"
9 - I.C. .334" GSR - Square Grooving with R 2.50 - .098"
11 - I.C. .421" GR - Round Grooving 3.25 - .128"
CH - Chamfering
210
GM Slot - Square Grooving
Ds
r
w
T
t1
Insert
Ordering Code Dimensions Inch Grade Toolholder
Size
W Width t1
RH of Ds T VBX VTX Inch mm
Inch mm Circlip Inch mm
7VGS0.74-1.50GM3 .029 0.74 .028 • •
7VGS0.84-1.50GM3 .033 0.84 .031 • •
7VGS0.94-1.50GM3 .037 0.94 .035 • •
7VGS1.21-1.50GM3 .048 1.21 .043 • •
7VGSR1.41-1.50GM3 .056 1.41 .051 • • CGMC9C13-45-7-3 CGMC8C13-40-7-3
7V 7VGSR1.50-1.50GM3 .059 1.50 - .059 1.50 .500 .124 • • CGMC5/16C13-40-7-3 CCGMC9C13-45-7-3
7VGSR1.57-1.50GM3 .062 1.57 .059 • • GMC075W050-100-7-3 GMC20W13-25-7-3
7VGSR1.71-1.50GM3 .067 1.71 .063 • •
7VGSR2.00-1.50GM3 .079 2.00 - • •
7VGSR2.39-1.50GM3 .094 2.39 .091 • •
7VGSR2.50-1.50GM3 .098 2.50 - • •
9VGS1.17-2.50GM3 .046 1.17 .043 • •
9VGS1.41-2.50GM3 .056 1.41 .051 • •
9VGSR1.50-2.50GM3 .059 1.50 - • •
9VGSR1.57-2.50GM3 .062 1.57 .059 • •
9V
9VGSR1.71-2.50GM3 .067 1.71 .063
.098 2.50 .657 .175
• • CGMC11.5C17-50-9-3
CGMC7/16C17-45-9-3
CGMC7/16C17-45-9-3
CGMC11.5C17-50-9-3
9VGSR2.00-2.50GM3 .079 2.00 - • • GMC075W066-118-9-3 GMC20W17-35-9-3
9VGSR2.39-2.50GM3 .094 2.39 .091 • •
9VGSR2.50-2.50GM3 .098 2.50 - • •
9VGSR3.00-2.50GM3 .118 3.00 - • •
9VGSR3.18-2.50GM3 .125 3.18 .122 • •
11VGS1.17-3.25GM3 .046 1.17 .043 • •
11VGS1.30-3.25GM3 .051 1.30 - • •
11VGS1.42-3.25GM3 .056 1.42 .051 • •
11VGSR1.50-3.25GM3 .059 1.50 - • •
11VGSR1.55-3.25GM3 .061 1.55 .057 • •
11VGSR1.57-3.25GM3 .062 1.57 .059 • •
11VGSR1.71-3.25GM3 .067 1.71 .063 • •
11V
11VGSR1.85-3.25GM3 .073 1.85 .069
.128 3.25 .854 .226
• • CGMC15C22-65-11-3 CGMC14C22-60-11-3
CGMC5/8C22-60-11-3 CGMC15C22-65-11-3
11VGSR2.00-3.25GM3 .079 2.00 - • • GMC100W085-175-11-3 GMC25W22-45-11-3
11VGSR2.39-3.25GM3 .094 2.39 .091 • •
11VGSR2.50-3.25GM3 .098 2.50 - • •
11VGSR3.00-3.25GM3 .118 3.00 - • •
11VGSR3.18-3.25GM3 .125 3.18 .122 • •
11VGSR4.00-3.25GM3 .157 4.00 - • •
11VGSR4.75-3.25GM3 .187 4.75 - • •
11VGSR5.26-3.25GM3 .207 5.26 .203 •
211
GM Slot - Round Grooving
Ds
r
w T
t1
Insert
Ordering Code Dimensions Inch Grade Toolholder
Size
t1 r
RH W Ds T VBX VTX Inch mm
Inch mm Inch mm
CGMC 9C13-45-7-3 CGMC 8C13-40-7-3
7V 7VGR1.10-1.50GM3 .087 .059 1.50 .043 1.1 .500 .124 • • CGMC 5/16C13-40-7-3 CCGMC 9C13-45-7-3
GMC 075W050-100-7-3 GMC 20W13-25-7-3
212
GM Slot - Chamfering
Ds
45°
w
T
t1
Y
45°
Insert
Ordering Code Dimensions Inch Grade Toolholder
Size
W t1
RH Ds T Y VBX VTX Inch mm
Inch mm Inch mm
CGMC 8C13-40-7-3 CGMC 9C13-45-7-3
7V 7VCH1.20-1.50GM3 .047 1.20 .059 1.50 .500 .124 .063 • • CCGMC 9C13-45-7-3 CGMC 5/16C13-40-7-3
GMC 20W13-25-7-3 GMC 075W050-100-7-3"
213
GM Slot Toolholders
C GM 9 C 13 - 45 - 7 - 3
1 2 3 4 5 6 7 8
1 - Holder Type 2 - System 3 - Shank Dia. (inch) 4 - Shank Style 5 - Min Cutting Dia. (inch) 6 - Tool Overhang (inch)
C- Carbide Shank GM - Groove Milling 5/16 - .312" C - Cylindrical 13 - .500" 25 - .984"
None - Steel Shank 8 - .315" W - Weldon 050 - .500" 100 - 1.000"
9 - .354" 065 - .650" 118 - 1.175"
7/16 - .438" 17 - .657" 30 - 1.181"
7 - Insert Size 8 - Number of Flutes
11.5 - .453" 085 - .850" 40 - 1.575"
7 - I.C. .267" 3 12 - .472" 22 - .894" 175 - 1.750"
9 - I.C. .334"
14 - .551" 45 - 1.772"
11 - I.C. .421"
15 - .590" 50 - 1.969"
5/8 - .625" 60 - 2.362"
075 - .750" 65 - 2.559"
20 - .787"
25 - .984"
100 - 1.000"
214
Carbide Cylindrical Shanks
D1
D Ds
L1 (max) L3 (min)
L
Holding device
L3 (min)
Spare Parts
9V 11V
Always mount insert with the identification mark between the two curved surfaces on the toolholder
215
Weldon Shanks
D1 D1
D D Ds Ds
L1 L1
L L
9V GMC 075W066-118-9-3 4.000 1.175 .750 .453 SN3T15-M2 M4x.7x13.5 Blade Smart Handle Torx T15
T15-1/4 1/4X2
11V GMC 100W085-175-11-3 4.500 1.750 1.00 .591 SN4T20-M3 M5x.8x15.5 Blade Smart Handle Torx T20
T20-1/4 1/4X2
L1 D
L D1 Screw Size Key/Blade Handle Size
Inch mm Inch mm
7V GMC 20W13-25-7-3 3.740 .984 25.0 .787 20.0 .354 SN2T8-M1 M3.0x0.5x9 K2T - Torx T8
9V GMC 20W17-30-9-3 3.937 1.181 30.0 .787 20.0 .453 SN3T15-M2 M4x0.7x13.5 Blade Smart Handle Torx T15
T15-1/4 1/4X2
11V GMC 25W22-45-11-3 4.528 1.772 45.0 .984 25.0 .591 SN4T20-M3 M5x0.8x15.5 Blade Smart Handle Torx T20
T20-1/4 1/4X2
9V 11V
Always mount insert with the identification mark between the two curved surfaces on the toolholder
216
Vardex
THREADING IS
Advanced Threading Solutions
VARDEX is the company’s prominent product line for Thread Turning, Thread Milling, and Gear Milling Solutions.
Thread Turning: The VARDEX TT tools offer an extensive collection of pitches and standards in different grades, IC
ranges and types of insert styles, as well as customized solutions for the oil and gas industry.
Thread Milling: The VARDEX TM line provides a wide range of applications and solutions in multi-tooth, single-tooth
point for deep holes, and solid carbide tools.
Gear Milling: The VARDEX Gear Milling line is a revolutionary concept for gear, rack and spline applications, offered in
indexable inserts and solid carbide tools.
VARGUS GENius™: VARGUS’ industry-leading Thread Turning and Thread Milling solutions are seamlessly complimented
by the VARGUS GENius™ software – The most powerful tool selector, cutting data and CNC program generating software
available.
217
Medical
Introducing
VARGUS Solutions
for the Medical Industry
In keeping with the demands for mass production
and special tooling for the medical industry, VARGUS
provides an encompassing range of solutions for the
precise and detailed applications commonly used
world-wide in this rapidly growing industry.
Whether it be the manufacturing of miniature dental
implants, bone screws, bone plates, tulip heads,
or other exact medical components, VARDEX and
GROOVEX precision tools provide you with the
excellent VARGUS quality so well known in the metal-
cutting industry. Tailor-made tools are available on
request with the added advantage of the VARGUS
expertise and knowledge of more than 60 years.
Applications:
• Parting Off • Thread Milling
• Turning • Thread Whirling
• Grooving • Boring
• Thread Turning • Broaching
218
Groovex
VARGUS Worldwide
With a network of 13 international companies and hundreds of distributors, warehouses and certified ISO 9001 manufacturing
facilities, VARGUS Ltd. serves customers in more than 100 countries around the globe. A customer-focused organization,
VARGUS Ltd. is committed to providing innovative products and solutions of the highest quality and excellent value, and
is renowned for its technical expertise and uncompromising service.
GLOBAL HEADQUARTERS
VARGUS SUBSIDIARIES
VARGUS AUTHORIZED
DISTRIBUTORS
EUROPE
DENMARK FRANCE GERMANY ISRAEL POLAND
VARGUS Scandinavia VARGUS France VARGUS Germany NEUMO-VARGUS VARGUS Poland
+45 8794 4100 +33 1 4601 7060 +49 7043 36 161 +972 3 537 3275 +48 46 834 9904 / 46 831 5140
vargus@vargus.dk commercial@vargus.fr info@vargus.de neumo@neumo-vargus.co.il vargus@neumo.pl
ASIA
СHINA INDIA SOUTH KOREA
VARGUS China VARGUS India VARGUS Korea
+86 21 516 88300 +91 2135 654748 +82 31 660 7092
info@varguschina.net info@vargusindia.com info@varguskorea.co.kr
For the complete list of VARGUS distributors, visit our website at www.vargususa.com
I N C LU D E S :
OW
202UC2TS
N
PROD
and
ONS
EXPANSI
I n n o v a t i v e G r o o v i n g & Tu r n i n g S o l u t i o n s