Professional Documents
Culture Documents
BSM0510 040
BSM0510 040
1 General
On a small number of trucks it has been detected that braking does
not work in the lower brake position. As a result, trucks within the
machine number range indicated above should be inspected at the
next service visit. If the brake is not applied when the tiller arm is in
the lower position, perform adjustment according to the “Instruc-
tions” section in this BSM.
NOTE! The operator must verify correct brake operation every day
and, if required, measures should be taken according to the “Daily
inspection” section in the operating instructions.
The Service Manual will also be updated with this information.
BSM No.
BSM0510-040
2 Procedure
>L + 10mm
BSM No.
BSM0510-040
3 Parts
Parts for the long tiller arm:
Yoke - 221166
Switch bracket - 221163
Screw - 222151
Locking washer 126723-002
Parts for the short tiller arm:
Yoke - 221169
Switch bracket - 221162
Screw - 222151
Locking washer 126723-002