Professional Documents
Culture Documents
ACO K9 en - Kap07
ACO K9 en - Kap07
Informations
Decision diagram . . . . . . . . . . . . . . 288
Basics . . . . . . . . . . . . . . . . . . . . . . 289
287
K9/1
Vacuum drains
7 Planning references
Roof drain Vacuum drain
Basic requirements
Influencing factors
Dimensioning
Material selection
288
K9/1
Vacuum drains
289
K9/1
Vacuum drains
7 Planning references
Roof drain Vacuum drain
Planning references
The roof cover is the ultimate limit of a interior pipes. The increase in damages, especially on
building. Due to the high demands on Drains without odour seals with compres- flat roofs of light construction, due to
these ceilings by rainfall, fluctuating cli- sion-sealing flanges are used in these heavy rainfalls occurring more frequently,
matic conditions and varied traffic loads, areas. The roof drains must be arranged makes the engineering design and calcula-
the seal in the roof structure receives so that the rain water is drained quickly. tion of the emergency drainage on flat
special importance regarding its physical roofs a must.
construction. Distance between the drains: According to DIN 1986-100, the emer-
■■ Max. 20 m for flat roof drains gency drain may not be connected to the
ACO has developed flat roof drains for the ■■ Max. 10 m for channel drains drainage system, but must be drained by
functional drainage of rainwater and the a free outlet to property areas that can be
secure connection of the seal. The current ACO provides a modular system for flooded without causing damage.
version of EN 12056-3 in conjunction this, consisting of drains of the nominal The utilization must be checked for veg-
with DIN 1986-100 must be observed for widths DN 40, DN 50, DN 70, DN 80 and etated roof areas and inverse roofs (water
planning. DN 100, in 1 or 2-part version as well as volumes).
in stainless steel and cast iron. In addi-
Roof drains are installed to drain rain tion, accessories are offered for the most
water that accumulates on roof areas. diverse flat roof structures.
They absorb rain water and drain it over
Roof structures
Solid construction Lightweight construction
This type of roof construction, for Flat roofs of this construction are gener-
example, of prestressed concrete or fer- ally unsuitable for rainwater storage or
roconcrete are generally suitable for rain retention. They are mainly used in com-
water storage or retention. The resulting mercial buildings, for example, as a trap-
loads must be calculated in dimensioning ezoidal sheet metal structures provided on
the structure by the structural engineers. light frames.
Relevant information about the desired The additional rain water load at an
water over-fill must be provided to the increased backflow would create a burden
planner in time. that would even surpass snow loads.
Roof construction
The top floor ceiling is generally the best Flat roofs are designed as warm roof (non- The waterproof roof seal of the flat roof
part of the roof structure in flat roofs in ventilated roof), as cold roof (ventilated takes over the protection from penetrat-
multi-story buildings. Usually these are roof) or also as an inverted roof with ex- ing water. Typical materials for sealing
solid ferroconcrete sheets, fitted sheet ternal insulation. Roofs without insulation, flat roofs are bitumen - welding beads
metal or reinforced concrete structures. such as parking decks and terraces, and (now generally polymer modified) and
other roof areas above unheated spaces plastic roof sheeting.
Flat roofs are roofs that generally only are a special form.
have a low pitch.
290
K9/1
Vacuum drains
For stainless steel, this drain is sup- ACO also provides specifically matched bed, stilted panels, green roof and gravel
plemented by a bottom part, into which accessories for the various roof types, covered roof.
the vapour barrier is pressed in. The top such as non-ventilated roof, inverted roof,
sealing membrane must be pressed into multi-storey car park, plates in gravel
the drain.
Drain types
Two drain types are used for the safe The 1-piece drains are used for roofs EN 12056-3 and the current
drainage of rain water and the safe con- without insulation and inverted roofs. DIN 1986-100 must be observed when
nection of the sealing membranes: The 2-part drains are used on non-ventilat- planning flat roof drains.
■■ Flat roof, terrace, parking deck drains ed roofs. The compression-sealing flange The drains of the Jet series are used for
1-piece with a compression-sealing of the drain body/lower part is used for the vacuum drainage. The connecting lines
flange including the vapour barrier. The sealing must be designed according to
■■ Flat roof, terrace, parking deck drains membrane is securely connected to the DIN 1986-100.
2-piece with a compression-sealing compression-sealing flange of the upper
flange each flange section.
291
K9/1
Section contents Cast iron flat roof drains 7
Cast iron
Accessories 300
Flat roof drains Jet
Flat roof drains 302
Accessories 304
293
K9/1
Vacuum drain (cast iron)
7 Planning references
Roof drain Vacuum drain Cast iron
■■ A non-rotatable flange
Cast iron
■■ Drain body
Compression-sealing flange to connect
with the vapour barrier.
■■ Top section
with compression-sealing flange to con-
nect with the sealing membrane above
the insulation.
■■ Sealing ring standard, prevents the
penetration of waste water backflow
from the downpipe into the insulation
and also the water drainage of the seal-
ing membrane into the drain body.
294
K9/1
Vacuum drain (cast iron)
Vacuum drain
materialsclass A1, according to
Cast iron
EN 13501-1.
295
K9/1
Vacuum drain (cast iron)
7 Planning references
Roof drain Vacuum drain Cast iron
L15 M125
Top ring
Loose flange
Height-adjustment
Vacuum drain
Cast iron
Top section
Pitot tube
Sealing ring
Insulating ring
Compensation
element
Function elements
Loose flange
Drain body
Flat roof
heater
Insulating body
296
K9/1
Vacuum drain (cast iron)
Height Height-adjustment
adjustment
Loose flange
Vacuum drain
Cast iron
Top section
Sealing ring
Insulating ring
Compensation
element
Function elements
Loose flange
Drain body
Flat roof
heater
Insulating body
297
K9/1
Flat roof drains Jet
7 Drain body DN 50
Roof drainage Syphonic rainwater drainage Cast iron
Product information
■■ Drain body DN 50 ■■ With compression-sealing flange
■■ Coated cast iron ■■ With seepage openings
■■ Building material class A1 ■■ With function element
■■ Certified in accordance with DIN 1253
Ordering information
Core hole dimension
Øa
size [mm] [mm] [mm]
Syphonic rainwater drainage
b
For drain body without isolating body
76
298
K9/1
Flat roof drains Jet
Ordering information
Cast iron
Top sections and gratings
Ordering information
■■ Cast iron
■■ Cast iron Jet flat roof
10
□200
45
■■ Cast iron
■■ Cast iron Jet flat roof
10
DN 70
299
K9/1
Flat roof drains Jet
7 Drain body DN 50
Roof drainage Syphonic rainwater drainage Cast iron
Accessories
ventilation pipe
Cast iron SML pipe DN 100
for grey water downpipe
over roofs, length accor-
ding to DIN 12056 and
DIN 1986‑100
Syphonic rainwater drainage
40
80
Ø145
Cast iron
Ø110
■■ For upgrade of the drain
body DN 50 to an emergency
■■ Flat roof drains Jet overflow
Pilot tube 7047.10.55
55
DN 50
□300
Ø145 ■■ Flat roof drain upper part Spin
Compensation DN 70 ■■ Foam glass
50
7040.02.00
element ■■ Flat roof drain upper part Jet ■■ Weight: 0.7 kg
DN 50
■■ Stainless steel
Ø285
■■ With 2 mounting screws
■■ Shingle filter
■■ Height: 65 mm
height adjustment 7000.12.00 7000.11.00
■■ Can only be used in connection
65
7000.02.00
with a shingle filter
■■ Weight: 0.5 kg
300
K9/1
Flat roof drains Jet
21
■■ Cast iron
7000.08.00
Top ring ■■ Load class: M 125 7000.05.00
7000.44.00
■■ Weight: 0.8 kg
7000.43.00
Ø152
■■ Top sections
■■ Coated cast iron
□200 5084.80.00
■■ Frame dimensions:
45
301
K9/1
Flat roof drains Jet
7 Drain body DN 80
Roof drainage Syphonic rainwater drainage Cast iron
Product information
■■ Drain body DN 80 ■■ With seepage openings
■■ Coated cast iron ■■ With function element
■■ With compression-sealing flange
Ordering information
Core hole dimension
Øa
size [mm] [mm] [mm]
b
For drain body without isolating body
Syphonic rainwater drainage
105
302
K9/1
Flat roof drains Jet
Ordering information
Cast iron
Ø154
Ordering information
44
303
K9/1
Flat roof drains Jet
7 Drain body DN 80
Roof drainage Syphonic rainwater drainage Cast iron
Accessories
Ø190
■■ Flat roof drains Spin
Socket inclination: 90°
DN 100 – DN 150 ■■ Foam glass
Insulating body 7040.21.00
■■ Flat roof drains Jet ■■ Weight: 1.3 kg
Socket inclination 90°
Syphonic rainwater drainage
DN 80
266
430
400
Cast iron
■■ Foam glass
Insulating ring ■■ Flat roof drain upper part 7040.11.00
■■ Weight: 1.9 kg
Ø220
□450
50
Ø199
Ø189 ■■ Top frame with grating, load
class: L 15 and M 125 ■■ Cast iron
45
■■ Stainless steel
Ø285
■■ With 2 mounting screws
■■ Shingle filter
■■ Height: 65 mm
height adjustment 7000.12.00 7000.11.00
■■ Can only be used in connection
65
7000.02.00
with a shingle filter
■■ Weight: 0.5 kg
304
K9/1
Hinweis: @@ Dies ist eine Infobox-VORLAGE
Zubehör AAAAA ➔ Seite xxx.
Zubehör BBBBB ➔ Seite xxx.
Infobox
Section contents Stainless steel flat roof drains 7
Page
Basics 308
Flat roof drains Jet Drain body DN 40 – DN 100 Drain bodies lower part 314
Accessories 315
307
K9/1
Vacuum drain (stainless steel)
7 Planning references
Roof drain Vacuum drain Stainless steel
Basics
Stainless steel
The area of non-corrosive steels is de- example, in areas in which are located
scribed as stainless steel. However, this The flat roof drains of ACO Haustechnik directly by the ocean - the suitability of
generic term does not provide any conclu- are mass-produced from material grade the material used must be checked in any
sion of the quality of the steel grade used. 304. This material is resistant against case.
In waste water technology, material grade water and humidity. However, the material
304 with 18% chromium (Cr) and 10% is not suitable for all media, despite its
nickel (Ni) has prevailed. An austenitic, high-quality properties.
acid-resistant stainless steel suitable for In the event of an accumulation of aggres-
high temperatures has excellent hydraulic sive waste water or waste water contami-
characteristics due to its smooth surface. nated with chloride ions - this occurs, for
■■ A non-rotatable flange
Flange which is solidly connected to the
drain body.
■■ A rotatable flange
Flange with which the seal is pressed
against the non-rotatable flange to cre-
ate a tight connection.
■■ Lower section
with compression-sealing flange to con-
nect with the vapour barrier.
■■ Drain body
with compression-sealing flange to con-
nect with the sealing membrane above
the insulation.
■■ Sealing element
standard, prevents the waste water
backflow from the downpipe from pen-
etrating the insulation.
308
K9/1
Vacuum drain (stainless steel)
Stainless steel
Vacuum drain
This not only increases the functional in buildings that are occasionally not control the heated flat roof drains with an
reliability of the drainage system even heated during the winter months, drains additional thermostat.
at subfreezing temperatures, but is also that are located in shady areas, etc..
recommended by DIN 1986-100. A flat The regulations according to VDE and the
roof heater is recommended especially local EVU regulations must be observed.
309
K9/1
Vacuum drain (stainless steel)
7 Planning references
Roof drain Vacuum drain Stainless steel
Gravel trap Gravel trap Overfill ring Gravel trap Overfill ring
top section top section top section
Gravel trap
Loose flange
Flange
seal
Drain
body
Insulating Insulating
ring ring
Stainless steel
Vacuum drain
Drain
body
Insulating
body Bottom part Drain Bottom part Drain
body body
Flat roof
heater
310
K9/1
Vacuum drain (stainless steel)
Stainless steel
Vacuum drain
311
K9/1
Flat roof drains Jet
7 Drain body DN 40 – DN 100
Roof drainage Syphonic rainwater drainage Stainless steel
Product information
■■ Drain body ■■ Certified in accordance with EN 1253
Horizontal: DN 40 – DN 70 ■■ With compression-sealing flange
Vertical: DN 70/DN 100
■■ Stainless steel, material grade 304
Ordering information
b
For drain body without isolating body
DN 70 340 90 10 0174.46.79
in accor- with 75 mm
dance with accumula-
DIN tion
Stainless steel
DN70
312
K9/1
Flat roof drains Jet
98
DN100
Ø332
63
Ø332
Stainless steel
DN 50 1,5° 8,5 8,5 2,8 0174.46.44
71
72
250
Ø332
250
313
K9/1
Flat roof drains Jet
7 Drain body DN 40 – DN 100
Roof drainage Syphonic rainwater drainage Stainless steel
Components
Ordering information
Ø233
■■ With compression-
370
DN 100
sealing flange in accor-
dance with EN 1253
Stainless steel
DN100
314
K9/1
Flat roof drains Jet
LK=Ø233
14
■■ Installation height: 50 mm
Gulley grating Profiline Jet/Spin series
■■ Dimensions: 400 x 400 mm
50
■■ Profiline
□400
Galvanized steel 38150
Stainless steel, material grade 38156
304
Stainless steel
■■ Stainless steel flat drains Jet/ ■■ Height-adjustability: 78 –
78-108
3
30 Soft PVC 0174.42.92
NBR/SBR 0174.42.97
■■ EPDM rubber
■■ Stainless steel flat roof drains
Flange seal ■■ For box channels 0174.42.95
Jet/Spin series
■■ Thickness: 5 mm
315
K9/1
Flat roof drains Jet
7 Drain body DN 40 – DN 100
Roof drainage Syphonic rainwater drainage Stainless steel
200 ±1,5
Ø168
Ø160
32
57
70
Ø86 ■■ Styrofoam, PS 30
Insulation ■■ Intake guide ■■ In accordance with DIN 18164 0174.46.56
■■ Weight: 0.04 kg
□195
Syphonic rainwater drainage
250
Stainless steel
□205 ■■ Styrofoam
■■ Stainless steel flat roof drains
■■ Height: 250 mm
Insulation Jet/Spin series
■■ Length x width 205 x 205 mm
Socket inclination: 90°
150
110
■■ Weight: 0.2 kg
DN 70 0174.47.18
5
5
105
DN 100 0174.47.19
Ø323
1,5 ■■ Stainless steel flat roof drains ■■ Stainless steel, material grade
Damming ring Jet 304 0174.46.75
Socket inclination: 90° ■■ Weight: 1.1 kg
5,5
59
316
K9/1
Flat roof drains Jet
■■ Weight: 3.14 kg
DN 70 – DN 125
Socket inclination: 90°
620
■■ Stainless steel flat roof drains
Spin
■■ Galvanized steel panel
Support sheet for DN 70 – DN 125
92 ■■ Thickness: 1.5 mm 0174.47.26
Ø2 trapezoidal tin roof ■■ Stainless steel flat roof drains
500
■■ Weight: 3.0 kg
Jet
DN 100
Ø292
Ø122
Ø96
96
13
Ø76 Heat shield Jet ■■ With drive-in plug M8 and hexa- 0174.77.97
DN 70 gon head screw M8 x 16
Stainless steel
0
Ø9
■■ Stainless steel flat roof drains
■■ Foam glass
341
Jet
Insulating body ■■ Socket inclination: 90° 0150.12.69
Lower section DN 70
■■ Height: 100 mm
Socket inclination: 90°
Ø370 5
34
5
Ø7
■■ Stainless steel flat roof drains
341
Ø1
68 Jet ■■ Foam glass
Insulating body 0150.12.70
Socket inclination: 90° ■■ Height: 100 mm
DN 70
Ø370 5
34
□145
317
K9/1
Flat roof drains Jet
7 Drain body DN 40 – DN 100
Roof drainage Syphonic rainwater drainage Stainless steel
DN1
■■ Stainless steel flat roof drains
Jet ■■ Galvanized steel
Optimization piece
Socket inclination: 90° ■■ Weight: 0.5 kg
DN 70
l
DN 70/DN 40 0174.12.69
89
Length: 95 mm
DN2
DN 70/DN 50 0174.12.70
Length: 105 mm
Syphonic rainwater drainage
DN1
■■ Stainless steel flat roof drains
Jet ■■ Galvanized steel
Stainless steel
Optimization piece
Socket inclination: 90° ■■ Weight: 0.9 kg
DN 100
l
DN 100/DN 70 0174.12.73
89
Length: 130 mm
DN2
DN 100/DN 80 0174.12.74
Length: 120 mm
■■ Galvanized steel
■■ Gulley grating Profiline
■■ Mesh width 30 x 10 mm
Mesh grating 38150 38570
■■ Not screwed in place
38801
■■ Weight: 0.9 kg
■■ Galvanized steel
Gulley grating Profiline
■■ Mesh width 30 x 14 mm
Mesh grating ■■ 38150 36754
■■ Not screwed in place
■■ 38801
■■ Weight: 0.9 kg
■■ Stainless steel, material grade
304
■■ Gulley grating Profiline
Etched
Mesh grating 38156 38573
■■ Mesh width 30 x 10 mm
38803
■■ Not screwed in place
■■ Weight: 0.9 kg
■■ Stainless steel, material grade
304
■■ Gulley grating Profiline
Etched
Mesh grating 38156 36760
■■ Mesh width 30 x 14 mm
38803
■■ Not screwed in place
■■ Weight: 0.9 kg
318
K9/1