2- Layout positions for circuit components 3- Position Main Switch and Distribution Panel 4- Secure them to the board with a drywall screw 5- Connect supply conductors to the main switch and then to the distribution panel. Connect all conductors, (live, neutral, earth) to their respective terminals. Use the 20 Amp breaker for the main switch NB: DO NOT CONNECT TO THE POWER SOURCE AS YET 6- Position Switchbacks and the Socket Outlet on the circuit board and secure them with drywall screws 7- Measure and cut trunking to the respective length according to the layout 8- Position and secure trunking at their respective position using dry-wall screw 9- Secure the socket and fluorescent lamp in the respective position on ply-wood using dry-wall screw 10- Place conductors in the trunking and connect the neutral and earth to their respective terminals in the distribution panel, lights and switch 11- Connect the live conductor to the circuit breakers, through the switches, light and socket outlet. - 10 Amp for lights - 15 Amp for socket outlet 12- Test for continuity and assemble switches and socket-outlet covers 13- Power up the circuit and test to record observation
Refurbish Antique Telephones for Fun and Hobby: Step by Step Instructions to Take an Old Telephone and Return It to Its Original Working Order. No Electronics or Telephone Knowledge Needed.