alternate responses that are valid at that prompt. 1.Sign On 3.Beginning Of Goods Issue
Vocollect device: Vocollect device: To receive work, say ready
Welcome to the VoCollect system. Operator: Ready Current operator is <Operator>. Say ready. Operator: Ready.
Vocollect device: Password? 4.Transer to Selection location 7.Assignment Complete
Operator: 1 … 2 … 3 … 4 … Vocollect device: One Two Three Four, correct? Vocollect device: Picking complete Vocollect device: Aisle <Aisle number>. How many cages for assignment? Operator: Yes Operator: Ready c Operator: <Cage number> Vocollect device: <cage number>, correct? Operator: <Yes / No> 2.Function Selection 5.Location Verification Vocollect device: <Speak number for seal 1> Operator: <Seal number> Vocollect device: <seal number>, correct? Vocollect device: Function? Vocollect device: <Location #> Operator: <Yes/No> Operator: < 3 > At this point, operator may say description, item Vocollect device: Printer? At this point, operator may say Description number, location, cancel or quantity Operator: <1> Operator: <Speak the Check Digit> Vocollect device: <printer number>, correct? Vocollect device: Goods Issue, correct? Operator: <Yes/No> Operator: Yes Vocollect device: Batch Number Vocollect device: Assignment complete. For next Operator: <Speak last 3 number> assignment, say ready
Vocollect device: Pick <Quantity> 8.Sign Off
Operator: <Quantity> Vocollect device: Sign off, correct? Operator: Yes To turn the device off: To erase the last word you said: Press and hold the yellow play/pause button until the LED Say, “Talkman, erase.” turns red and then shuts off. To have the device repeat the current prompt: To turn the device on: Say, “Say again” or “Talkman, continue.” Press the yellow play/pause button. To have the device repeat the previous prompt, your To put the device to sleep: last response, and the current prompt: Press the yellow play/pause button, or say, “Talkman, Say, “Talkman, repeat.” s sleep.” To erase your entire current response and have the To wake the device up: device repeat the current prompt: Press the yellow play/pause button, or say "Talkman, Say, “Say again” or “Talkman, back up.” wake up." To hear a list of the vocabulary words that you can say at the current prompt: To change operators (load your templates): Say, “Talkman, help.” 1. With the device turned on, press the operator To change the pitch, speed, or gender of the device's button. The device says, ”Current voice: operator is <operator name>. Select menu item.” 1. With the device turned on, press the operator 2. Press the + or - button.The device says the button. The devics says, ”Current operator is menu items. When you hear “Change operator”, <operator name>. Select menu item.” press the operator button. The device says, 2. Press the + or - button until you hear the “Please wait. Change team.” appropriate menu option (change pitch, change 3. Press the + or - button to scroll through teams. speed, or change speaker). 4. When you hear your team, press the operator 3. Press the + button to make the voice higher or button.The device says, “Current operator is faster. Press the button to make the voice lower or <operator name>. Select new operator.” slower. Press either + or - to switch between the 5. Press the + or - button to scroll through the list. male and female voice. 6. When you hear your name, press the operator 4. When you are satisfied with the sound of the voice, button.The device says, “Loading operator.” press the operator button to save the new setting. When the templates are loaded, the device says, “Current operator is <your operator name>. Good night.”The device then goes to sleep.
To perform a noise sample:
When the background noise has changed or the device is not recognizing the words that you are saying, you should immediately perform a noise sample. To perform a noise sample, say "Talkman, noise sample," or perform the following steps: 1. With the device turned on, press the operator button. The device says, ”Current operator is <operator name>. Select menu item.” 2. Press the + or - button.The device says the menu items. When you hear “Noise sample”, press the operator button. The device says, “Please be quiet for a few seconds…say zero, one, two, three, four.” 3. Repeat the digits to the device as it prompts you to do so. When the noise sample is complete, the task continues at the point where you left off.