Professional Documents
Culture Documents
Amo Sushi Medio Dia 10
Amo Sushi Medio Dia 10
Amo Sushi Medio Dia 10
OWNER'S MANUAL
ENGLISHTAOPFRCDU
?
Please read carefully and thoroughly this manual
before operating this unit.
?
Contact the authorized SVC man for repair or
MODELS: LS-C07_Series
LS-H07_Series
LS-C09_Series
LS-H09_Series
LS-C12_Series
LS-H12_Series
AS-C07_Series
AS-H07_Series
AS-C09_Series
AS-H09_Series
AS-C12_Series
AS-H12_Series
C07L_Series
C07A_Series
C09L_Series
C09A_Series
C12L_Series
Prior to
C12A_Series
installation, this
air-conditioning
GRE K
unit must be submitted for approval by the utility
service which provides electricity (EN 61000-3 Norm).
Safety precautions
Safety Precautions
To prevent injury and property damage, follow these instructions.
Warning ................................2
Incorrect operation due to ignoring instructions will cause harm or
Caution .................................3
damage, the seriousness of which is indicated by the following
symbols.
property.
TroubleshtingpCadMcOISfyP
Care and Maintenance The following items are classified by these symblos.
Care and Maintenance .......18
WARNING
WARNING
Plug in the power plug Do not operate or stop the unit by Do not damage or use an
properly. inserting or pulling out the power plug. unspecified power cord.
?
Otherwise, it will cause electric shock ?
It will cause electric shock or fire due ?
It will cause electric shock or fire.
or fire due to heat generation or to heat generation. ?
In the supply cord is damaged, it mut
electric shock. be replaced by the manufacturer or
its service agent or a similarly
quallfied person in order to avoid a
hazard. (Y Attachment)
Do not modify power cord length or Do not operate with wet hands or in Do not direct airflow at room occupants
share the outlet with other appliances. damp environment. only.
?
It will cause electric shock or fire due ?
It may cause electric shock. ?
This could damage your health.
to heat generation.
Always perform grounding work. Do not allow water to run into Always install airleakage breaker
electric parts. and a dedicated switching board.
?
No grounding may cause electric ?
It may cause failure of machine or ?
No installation may cause fire and
shock. electric shock. electric shock accident.
Unplug the unit if strange Do not use the socket if it is Do not open the entrance
sounds, smell, or smoke loose or damaged. during operation.
comes from it.
?
It may cause fire and electric ?
It may cause fire and electric ?
It may cause electric shock.
shock accident. shock.
Keep firearms away. Do not use the power cord close to the Do not use the power cord near flammable
heating tools. gas or combustibles, such as gasoline,
benzene, thinner, etc.
?
It may cause fire. ?
It may cause fire and electric shock. ?
It may cause an explosion or fire.
2
WARNING
WARNING
ENGLISH
when gas goes out. randomly.
?
It may cause explosion, fire and, burn. ?
It may cause failure and electric shock.
CAUTION
CAUTION
Never touch the metal parts Do not clean the air Ventilate well when used
of the unit when removing conditioner with water. together with a stove, etc.
the filter.
?
They are sharp and may cause ?
Water may enter the unit and ?
An oxygen shortage may occur.
When cleaning the unit, Do not put a pet or house Do not use appliance for special
first make the power
sure plant where it will be purpose such as animals or
and breaker are turned off. exposed to direct air flow. vegetables, precision machine,
or conservation of art articles.
?
Since the fan rotates at high ?
This could injure the pet or ?
It may cause damage of animals
speed during operation, it may plant. or vegetables or loss of
cause injury. property.
Stop operation and close Hold theplug by the head of Turn off the main power
the window in storm or the power plug when taking switch when not using it for
hurricane. it out. a long time.
?
Operation with windows opened ?
It may cause electric shock and ?
It may cause failure of product
may cause wetting of indoor and damage. or fire.
Do not place obstacles Ensure that an installation console of Always insert the filters
around the absorption inlet or the outdoor appliance is not damaged securely. Clean it once
instead of blowing-out inlet. due to the use for a long time. every two weeks.
?
It may cause failure of appliance ?
Ifleaving appliance damaged, ?
Operation without filters may
or accident. there is concern of damage due cause failure.
to the falling of product.
Do not use strong detergent Do not place heavy object on the Do not drink water drained
such as wax or thinner but power cord and take care so that from air conditioner.
use a soft cloth. the cord should not be pressed.
?
Appearance may be deteriorated ?
There is danger of fire or electric ?
It contains contaminants and will
due to change of product color or shock. make you sick.
scratching of its surface.
Use caution when unpacking and installing. If water enters the
product, turn the power
Sharp edges could cause injury. switch of the mainbody of appliance off. After
taking the power-plug out from the socket,
contact with the service center.
3
Preparation before operation
How to Insert the Batteries
Insert new batteries making sure that the (+) and (-) of
battery are installed correctly.
NOTES:
TroubleshtingpCadMcOISfyP
?
Use 2 AAA(1.5volt) batteries. Do not use rechargeable
batteries.
?
The remote control may be stored by mounting it on
a wall.
?
To operate the room air conditioner, aim the remote
control at the signal receptor.
4
Signal Receptor
Each Icon turns on when the unit is operated, then the only Icon outline to be operated is bright.
ENGLISH
Cooling Mode Lights up during Cooling operation. (Outline)
5
About the remote control on the system
The remote control transmits the signals to the system.
TroubleshtingpCadMcOISfyP
4 Used to select fan speed in four steps
low, medium, high and CHAOS.
JET COOL
5 Used to startor stop the speed
?
Cooling Model( ), Heat Pump Model( )
6
How to use the Operation Mode Selection button
Cooling Operation
1
Press the
The unit will
a beep.
Start/Stop button.
respond with
ENGLISH
Open the door on the remote control. To select Cooling
2 Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
ON
7
Auto Operation
Press the Start/Stop button.
1 The unit will respond with
a beep.
TroubleshtingpCadMcOISfyP
Open the door on the remote control. To select Auto
2 Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
ON
The temperature and fan speed are automatically set by the
3 electronic controls based on the actual room temperature. If
you want to change the set temperature, press the Room
Temperature Setting buttons. The cooler or warmer you feel,
the more times (up to two times) you should press the button.
The set temperature will be changed automatically.
8
Healthy Dehumidification Operation
1
Press the
The unit will
a beep.
Start/Stop button.
respond with
ENGLISH
Open the door on the remote control. To select Healthy
2 Dehumidification Operation, press the Operation Mode
Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
During the healthy dehumidification function, the airflow volume is automatically set according to the
optimization algorithm responding to the current room temp. status which makes the room condition
healthy and comfortable even in the high humidity season.
9
Heating Operation(Heat pump model only)
Press the Start/Stop button.
1 The unit will respond with
a beep.
TroubleshtingpCadMcOISfyP
Open the door on the remote control. To select Heating
2 Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
10
Jet Cool Operation
1
Press the
The unit will
a beep.
Start/Stop button.
respond with
ENGLISH
Press the Jet Cool button to operate
2 the speed cooling mode and the unit
will operate in super high fan speed
on cooling mode for 30 minutes.
To cancel the Jet Cool mode, press the Jet Cool button or
3 the fan speed button or the
room temperature setting button
again and the unit will operate in high fan speed on cooling
mode.
or or
NOTE:
During the JET COOL function at any moment, the A/C starts to blow the cool air at
extremely high speed for 30 minutes setting the room temp. automatically to 18°C. It is
especially used to cool the room temp. in the shortest time in a hot summer.
In heat pump mode or neuro fuzzy mode, however, the JET COOL function is not available.
In order to return to the normal coolingmode from the JET COOL mode, you just press
either the operation mode selection button, airflow volume selection or temp. setting button
or the JET COOL button again.
11
PLASMA Purification Operation(Optional)
TroubleshtingpCadMcOISfyP
Open the door on the remote control.
2 Press the PLASMA air purifying
operation ON/OFF button.
Operation will start when the button is
pressed and stop when the button is
pressed again.
Set the fan speed again with door of the remote control
3 closed. You can select the fan
speed in four
steps-low, medium, high or CHAOS.
Each time the button is pressed, the fan
speed mode is shifted.
12
2nd F Operation
1
Press the Start/Stop button.
The unit will
a beep.
respond with
ENGLISH
Open the door of the remote control and press the 2nd
2 Function button to operate functions printed in blue at bottom
of buttons.
(Check the indication of 2nd function on remote control
display.)
These buttons operate the timer setting as follows:
CANCEL
ON OFF SET
AUTO CLEAN
CANCEL
ON OFF SET
AUTO CLEAN
13
Additional features
Sleep Mode
Press the Sleep Mode Auto button to set the To cancel the Sleep Mode, press the sleep
1 time you want the unit to turn off Mode Auto button several times until the star
automatically.
( ) disappears from the operation display.
The Timer is programmed in one-hour
2 increments by pressing the Sleep Mode Auto Note: The Sleep Mode will be operated at
button 1 to 7 times. slow fan speed (cooling) or medium fan
The sleep mode is available for 1 to 7 times. To speed (heat pump only) for quiet sleeping.
alter the time period in steps of 1 hour, press
TroubleshtingpCadMcOISfyP
the Sleep Mode Button while aiming at air IN COOLING MODE OR HEALTHY
conditioner. DEHUMIDIFICATION MODE:
The temperature will automatically rise by 1°C
3 Make sure the Sleep Mode Auto LED lights up. over the next 30 minutes and by 2°C in 1 hour
for comfortable sleeping.
Time can be set only when you have pressed Press the Time Setting buttons until the
1 the Reset button. If you have just replaced the 3 desired time is set.
batteries, the Reset button should be pressed
to reset the time.
Delay OFF Timer Delay ON Timer Delay OFF and ON Timer Delay ON and OFF Timer
14
Vertical Airflow Direction Control
ENGLISH
The up/down airflow (Vertical Airflow) can be Note:
adjusted by using the remote control. If you press the CHAOS swing button, the
horizontal airflow direction is changed
automatically based on the CHAOS
algorithm to distribute the air in the room
evenly and at the same time to make the
human body feel most comfortable, as if
enjoying a natural breeze.
Always use the remote control to adjust the
1 Press the Start/Stop button to start the unit. up/down airflow direction. Manually moving
the vertical airflow direction louver by hand,
could damage the air conditioner.
Press Chaos Swing button and the louvers will
2 When the unit is shut off, the up/down
swing up and down. Press the Chaos Swing
button again to set the vertical louver at the airflow direction louver will close the air
1 Press the Start/Stop button. the unit will respond with a beep.
Open the door on the remote control. Press the Air Circulation button. Close the door on the
2 remote control. Now each time that you press the Indoor Fan the fan is
Speed Selector, speed
shifted from low to CHAOS and back to low again.
CHAOS Air Fan speed is on low. Fan speed is on medium. Fan speed is on high.
Note:
CHAOS Air economizes power consumption and prevents overcooling. The fan speed is
automatically changed from high to low or vice versa, dependingon the ambient temperature.
15
Auto Clean
?
Open the door on the remote control. Press the Auto Clean Button.
Close the door on the remote control. Now each time that you press the start/stop
button, the Air conditioner operates clean function automatically.
TroubleshtingpCadMcOISfyP
Display Luminosity
?
The Display Luminosity can be adjusted by using the remote control.
Press the start/stop button to start the unit. Open the door on the remote control, press
the 2ndF button and, press display luminosity button. Display will be dark. Press the
button again to set bright display.
16
Forced Operation
ENGLISH
Operation procedures when the remote
control can't be used.
The operation will be started if the power
button is pressed.
If you want to stop operation, re-press
the button.
Power
button
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of
room temperature and resets in 18 minutes.
During test operation, if remote controller signal is received, the unit operates as remote controller sets.
If you want to use this operation, open the front panel upward and Press the power button let it be
pressed for about 3 seconds.
If you want to stop the operation, re-press the button.
Auto restart
In case the power comes on again after
power failure, Auto Restarting Operation is the function to
a
Helpful information
Fanspeed and cooling capacity.
Thecooling capacity indicated in the specification is the
value when the fan speed is set to high, and the capacity will
be lower at low or medium fan speed. High
High fan speed is recommended when you wish to cool the
room quickly.
Speed
17
Care and maintenance of the air conditioner
CAUTION: Before performing any maintenance, turn off the main power to the system.
Indoor Unit
1 Open the upside of Front Panel 5 Relocate dried air filters at the shade and then
close the panel.
Air filters
TroubleshtingpCadMcOISfyP
Front panel
Panel hook
owder
Gasoline
air filters.
1. Lift the front access panel and pull the filter tab
Air filters slightly forward to remove the filter.
cleaner. If it has hard wash 3. After washing with water, dry well in the shade.
pollution, by
water. 4. Re-install the air filter.
18
Cleaning of Purifying Filter
?
Recomended use period : About 3 months
1 Open the upside of Front 2 Put up the front panel. 3 Remove air filters and then
ENGLISH
panel. The hook of panel comes off. pull out plasma filter
Plasma
filters
Outdoor Unit
(Rear)
(Rear)
(Side) (Side)
Air intake vents Air intake
Piping Piping
vents
Drain Hose
Drain Hose
Air outlet vents
Air outlet
vents
19
When the air conditioner is not going to be used for a long time.
Operate the air conditioner on Air circulation Clean the air filter and install it in the indoor
mode (Refer to page 15) for 2 to 3 hours. unit.
(Refer to page 18 for cleaning filters.)
?
This will dry out the internal mechanisms.
TroubleshtingpCadMcOISfyP
Turn off the circuit breaker, and disconnect
the plug.
Check that the air inlet and outlet of the
CAUTION
CAUTION indoor/outdoor unit are not blocked.
Operation Tips
Do not overcool the room. Keep blinds or curtains Keep the room temperature
closed. uniform.
This is not good for the health Do not let direct sunshine enter Adjust the vertical and
and wastes electricity. the room when the air horizontal airflow direction to
conditioner is in operation. ensure a uniform temperature
in the room.
Make sure that the doors Clean the air filter regularly. Ventilate the room
and windows are shut tight. occasionally.
Avoid doors and Blockages in the air filter Since windows kept closed,
opening are
windows much reduces the airflow and lowers it is idea to open them
as as possible a good
to the cool air in the the cooling and dehumidifying and ventilate the room now and
keep room.
effects. Clean at least once in then.
every two weeks.
20
Before you call for service...
ENGLISH
following points requesting repairs or persists, please
contact your dealer or service center.
operate. ?
Has the fuse blown or has the circuit breaker
been tripped?
-
room.
warm room
conditioner.
21
Memo
22
P/No.: 3828A20149Z Printed in Korea
After reading this manual, keep it in a place easily accessible to the user for future reference.