Professional Documents
Culture Documents
新建文本文档
新建文本文档
It is best to send it to you after the bracket and oil cylinder are completed and
the installation and inspection are correct
Hi Jake.
Our engineer have checked the blue prints of hoists,some flaws are discovered.
Before production, we will carefully revise the drawings for your inspection.
We currently use normal grade A36 steel for the steel plates of all the hoists.
Only the 630 needs to be ASTM Grade 50 steel. Can you build hoists with a higher
grade steel so we can make the walls thinner to reduce cost and weight? I have seen
some hoists from different brands that use 100 grade steel and they are very strong
and very light.
At present our materials and process technology have been upgraded and very mature.
We use Q355B(namely ASTM Grade 50 steel) for the steel plates and tubes of all the
hoists,
we've supplied updated hoists to customers for several years.And we'll supply the
same grade products to you.If you agree with this, I will quote you based on our
materials.
Currently Most of brands use 100 grade steel to manufacture truck body.
100 grade steel for support is currently in the development and research stage
Best regards
����һֱ������������������ Ŀǰ������ƽ̨û�е��̡��������
���������Ϊ���������⣬ Ǹ���ȫ���˻�����������ͻ����
ᵥ�ͷ������
������ԧ�� �է���:
�������֧�ߧڧ �ާ
� �� � ݧݧݧէ���ߧ���ݧߧڧ֧�ݧ�ߧ�� �ڧ�ާѧ� ���ا,�ڧѧ ,����ۧݧ
ߧ� �����֧��ڧѧ� ��ѧۧ�.