Professional Documents
Culture Documents
Midea LAD Top Load 8.5kg 10.5kg
Midea LAD Top Load 8.5kg 10.5kg
Please read this User’s Manual carefully for proper use of Midea Washing Machine.
A quality product of
Customer Care
Email: customercare@midea.com.ph
Toll free: 1-800-10-863-5522
Landline: (02) 863-55-22
SMS: (0917) 863-5522
Monday - Sunday / 8:00am - 8:00pm
Safety Precautions
Quick start This icon represents Forced Execution. Details are displayed
inside the icon.
Operation This appliance is not intended for use by individuals with reduced
physical, sensory or mental capabilities or those who lack experience
Wasg Settings (Program) and knowledge, unless they are under the supervision of a person
responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.
Troubleshooting Warning
天小
小天
Warning Use the correct power source. Do not plug or unplug the machine
from power source when barefoot
and with wet or damp hands.
Do not let children play with and Do not wash clothes damp with
climb on the machine. kerosene, gasoline, alcohol and other
flammable materials.
Caution
Avoid damaging the power cord and Regularly clean the power plug. A running water source must be Water temperature should be below
power plug to avoid electric shock, connected to the inlet pipe before 50°C when washing with
short circuit and combustion. starting the washing program. warm water. C
0
>5
!
天小
!
Turn off the machine and unplug Properly connect the earth line of If power cord is damaged, only the Do not place heavy objects
from power source after using. socket to avoid electric shock due manufacturer, service agent or on the washing machine.
to accidental current leakage. qualified persons should repair it.
小天
Securely plug the machine in the Do not place flammable objects such
as candles, mosquito repellents and When unplugging the power supply, Do not wash raincoats, fishing coats
correct power source. pull the plug, not the cord. and similar heavy and thick items.
heating sources on the machine.
小天
! !
Unpacking Installation of Water Inlet Pipe
• Remove the machine from box and take out the (For Models with Single Screw Thread Inlet Pipe)
foam board at the bottom.
.
• Take out the accessories inside the tub.
+
+
+
1 2 3
+
+
is strictly prohibited.
Small ball
• Install the rat-proof base cover at the bottom of the machine. Base foam cushion
+
5mm
Junk ring +
B
smooth. Flatten it by filing if it is
not flat) and push it upward with
The connection socket consists force making the rubber washer
of parts A and B. Before installation, firmly press the plane center of
installed A and B must have a vertical gap of water tap mouth. Then tighten
do not about 5mm, or be directly disconnected. the screws sequentially.
If the bore of water tap is larger, After that, tightly screw on part B.
remove the plastic junk ring of part A.
7
+
+
To detach: Close the water tap, push down
the slide jacket of the
quick-release connector and
Installing Water Inlet Hose pull out th quick-release
(For Models with Double Screw Thread Inlet Pipe) connector.
To connect: Push down the slide jacket of
• Connect the water inlet pipe screw quick-release connector ( 4 small
(with metallic ring) to the water faucet
balls must be exposed ),
• Connect the clamping nut (with rubber insert it into the connection
seal ring inside) of the water inlet hose socket and then push upward.
to the washer inlet valve. +
Power cord
Lint Fiter
3 Connect
a power
to
5 Put down the drain hose.
source
4 Open the
water tap. - All sketches in this manual are for reference only. Please refer to the product, for the actual
appearance of the parts.
A clamp is used to
6
+
Press this button, to select the water level Press this button to set the delay time (the number • After program selection, press this button to start the
based on the clothes quantity. The indicator of hours that will elapse before washing starts ). wash cycle.
light is either steady or flashing, with each The delay time is set just before pressing the • Press this button to pause & resume the wash cycle.
press of the button. The steady indicator Start button, Refer to “Special features” section • As an option, this button also activates the
light is for levels , 3, 5, & 7 while the flashing of the manual, for more details. One Touch function. See Special Features section
light is for levels 2, 4, 6, &8. of this manual
! NOTE
Select the proper water level and other settings, as desired. !Close the lid when machine is running, otherwise, it will automatically
Press the Start/ Pause button stop working during the spin process and sound off a warning.
!The washer will not work when water does not reach the set water level.
End of Program
When the operation stops, the buzzer will sound continuously 6 times and
then the power will be automatically cut off.
Turn off the water tap.
Although the power will be cut off automatically, the power plug must still be pulled
out from the socket, for safety.
Wash Settings (Program)
Delay
1. Normal
This function postpones the start of the washing process and the delay time is 1-24 hours.
For washing clothes with cotton fabric and daily wear.
After selecting the wash settings, “long press” the Delay button repeatedly and the delay
2. Delicates time will increase by 1 hour. When the display shows 24 hours and the Delay button is
Has a gentle wash action and slow spin speed for light fabrics such as silk. pressed, the display light will turn off and the Delay function turns off correspondingly.
If imbalance still occurs after the 2nd attempt, an alarm will sound and the user needs to 3. Restore and put back the filter.
selects the corresponding water level. The “fuzzy” control is deactivated in the
following conditions: 1. If water is present in the tub at the start of
operation and 2. If the user selects a certain water level at the start of operation.
Note: If the drain filter is not cleaned at proper time (every 10 times of use).
Drain problem could occur
Troubleshooting