HIGH LEVEL AND OVERFILL ALARM SYSTEM
Gauge Test Procedure
1. Onthe SCD, press the Service button.
2. Inthe Service window, press the Gauge Test... button and log in.
backup Tint
owe) |) _ te
Tank Sen. | wonta
rene] ey,
ree
rnin. || Soe Tes.|/ stan
Aeserout alta
3. Select System and Tank.
4. Check the Status of the TGE in the Jest Data: Status field. It must be
OK for the Gauge test to work
Service - Gauge Test
ude
tsawtsyemm | sect System. Test Data
asaecr ai [overt >) Status
Pree Sar To os
‘Seleot Tanke
— co fi
0700
‘Abort Test em
pe | ————
5. Press the Start Test button and wait for the system to reach alarm
level limits, Simulated ullage is displayed in the window,
Note! The test can be aborted at any time during this phase by pressing
the Abort Test button.
6. When the Gauge Test is completed, press the Exit button to close the
function.
158 Rosemount TankRadar” STaR
lure pe suas wary wiero puejono7 YS