Professional Documents
Culture Documents
Pre Installation Requriment - HTP 40 - EN
Pre Installation Requriment - HTP 40 - EN
Pre Installation Requriment - HTP 40 - EN
Requirements
HTP 40
Machine Data
The figure on the cover may not exactly represent the delivery state of the machine.
Machine Data
Type HTP 40
Number MA XXXXX-X-X
Ident number X-XXXX-XXXXXX-X
Year of manufacture 2020
Electrical Data
Voltage X x XXX V
Frequency XX Hz
Power consumption 4 kVA
Manual
Pre-Installation Requirements 28480
Printed 13/10/2020
Imprint
Publisher HERZOG Maschinenfabrik GmbH & Co. KG
Auf dem Gehren 1
D-49086 Osnabrück
E-Mail info@herzog-maschinenfabrik.de
Table of content
Required Space
bd435384-3
GB-00481
NOTE!
The data can change if customer-specific options are fitted
1.2.1. Surface
GB-36094
Foundation surface
bd435385-0
HTP 40 HTP 60
Weight kg 324 415
2
Floor load kg/m 950 1175
Standing area mm 620 x 550
Foundation not required
Surface level, can be loaded with the machine's weight.
2. Energy requirements
GB-00207
2.1. Electricity
EN-45818
NOTE!
The machine is not suitable for operation with a residual current circuit
breaker (RCD).
NOTE
Only on a machine with semi-automatic ring cleaner!
Connections
HTP 40
1 equipotential bonding M 8
2 electrical cable duct (M 25 x 1.5)
3 electrical terminal strip (in the switch cabinet, see circuit diagram)
4 pneumatic connection (option) (threaded connection R 1/4" with screwed
in hose sleeve ∅ 6 mm)
The supply connections items 1, 2 (and 4) are located on the rear of the
machine.
NOTE
No special safety equipment is required on customer side for the machine
operation.
NOTE!
Aggressive air components are not permissible.
5.2. Emissions
GB-06775