portable power generators. Int. J. Hydrogen Energy 2015, 40, 7707–7719. 2.M. Becherif, D. Hissel, "MPPT of a PEMFC based on air supply control of the motocompressor group", International Journal of Hydrogen Energy, Vol: 35, Issue: 22, 2010. 3. Hosseini, S.E.; Abdul Wahid, M.; Jamil, M.; Azli, A.A.M.; Mohamad, F.M. A review on biomass-based hydrogen production for renewable energy supply. Int. J. Energy Res. 2015, 39, 1597–1615. 4.Devrim, Y.; Devrim, H.; Eroglu, I. Development of 500 W PEM fuel cell stack for portable power generators.Int. J. Hydrogen Energy 2015, 40, 7707–7719. 5.Sarvi, M.; Barati, M.M.; , "Voltage and current based MPPT of fuel cells under variable temperature conditions," Universities Power Engineering Conference, Sept. 2010. 6.C.A. Ramos-Paja, G. Spagnuolo, G. Petrone, R. Giral, A. Romero, "Fuel cell MPPT for fuel consumption optimization," Circuits and Systems (ISCAS), Proceedings of 2010 IEEE International Symposium, June 2010. 7.G. Bucci, E. Fiorucci, F. Ciancetta, and F. Veglio, “Experimental Characterization and Modeling of PEM Fuel Cells under Dynamic Load Variations,” vol. 5, no. 2, pp. 75–84, 2010 S. Poojavarshini, R. Kavitha, K. Premalatha and P. Maithili, "Design and Simulation of DC to DC Boost and SEPIC Converters using MPPT for Photovoltaic system using MATLAB/SIMULINK,"2021 International Conference on Advancements in Electrical,Electronics, Communication, Computing and Automation (ICAECA), 2021, pp. 1-5doi:10.1109/ICAECA52838.2021.9675785. 8.P.Chen, "Output-feedback voltage tracking control for inputconstrained PEM fuel cell systems", International Journal of Hydrogen Energy, 2011. 9.