2. Plot the boundary line with your usual knowledge of line drawing on autocad 3. After establishing the boundary, grid the land using your desired grid interval 4. On the menu bar, click on points, then click on import/export point 5. Scroll and click on import points 6. From the displayed dialogue box, select the format of your observed data (preferably ENH Comma Delimited) which means u must have arranged your data in excel in ENH format with .csv extension 7. Click on source file to locate your data, continue clicking ok or yes until you are taken back to the default autocad screen 8. Type Z enter, E enter to display the imported data 9. On the menu bar, click on terrain, then click on terrain model explorer 10. Click on the + sign behind terrain, click on the next + sign behind surface one, then scroll and click on point files 11. Locate the previously imported data and click ok 12. Right Click on surface one, then scroll to build, continue pressing ok till surface get built, then close the dialogue box when it’s done 13. Click on terrain again and set current surface. Click on terrain for the last time and click on save current surface 14. Finally, click on point, scroll to create point-surface, then select random point 15. Start clicking on the intersection of your grid lines, enter point id and the point will be interpolated 16. Continue this till you have covered the whole site