Professional Documents
Culture Documents
2848datasheetNITOPROOF 120
2848datasheetNITOPROOF 120
Uses Properties
o
Nitoproof 120 is designed to provide a continuous Specific gravity at 25 C: 1.17
o
waterproofing barrier. Nitoproof 120 will provide a dried Drying time: 4-8 hours at 25 C for
film thickness complying with BS CP102 for concrete thickness up to 0.5 mm.
protection and waterproofing. Wherever a high build Drying times will be longer
system is required to give increased protection Nitoproof for lower temperature and
120 should be used. Also can be used for repairs to higher thicknesses.
felt/asphalt roofs. Flexibility (BS3416): Pass
Odourless and taint free when dry. Surfaces must be free from oil and grease in the case of
cementitious surfaces, oil and grease can be removed by the
use of Fosroc Chemical Degreaser (see separate data
Excellent flexibility. sheet) and in the case of steel work, oil or grease should be
removed by a suitable degreasing solvent such as Fosroc
Used for over 30 years in a wide range of temperatures Solvent 103.
and environments.
Application
Excellent adhesion to most common building
substrates. Nitoproof 120 can be applied by brush, roller or spray
equipment.
Suitable for use in Middle East conditions.
To comply with BS CP102:1973, Nitoproof 120 should be
2
Description applied at the rate of 1 litre per m .
Cleaning
Nitoproof 120 is based on selected bitumen blended with
non-asbestos reinforcing fibres. Nitoproof 120 produces
Clean all tools and equipments with Fosroc Solvent 103.
quality, high film build flexible bitumen coatings when dry.
Nitoproof 120 is a liquid grade used for intermediate
thickness coatings. Precautions
Page 1
Nitoproof 120
Fire Packaging
Nitoproof 120 and Fosroc Solvent 103 are flammable. No Nitoproof 120: 20 and 200 litres drums
smoking during use. In the event of fire extinguish with Fosroc Solvent 103: 4 litres
CO2 or foam.
Coverage
Flash points
Nitoproof 120 normally 1.5 - 2.5 m2 per litre depending on
o
Nitoproof 120: 37 C film build required.
o
Fosroc Solvent 103: 37 C
2
At 1 m per litre, Nitoproof 120 will give a dry film thickness
Spillage of 0.65 mm.
Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the
Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that any advice,
recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct or continuous
control over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products,
whether or not in accordance with any advice, specification, recommendation of information given by it.