Professional Documents
Culture Documents
1362 Plat Product List Product Description
1362 Plat Product List Product Description
go2INTERCEPT passive:
GSM interception –
Passive, massive, of the air.
(page 3-4)
(page 5-6)
(page 7-10)
2
Passive version: GSM interception
go2INTERCEPT passive:
GSM interception –
Passive, massive, of the air.
It is a wide band (processing the whole GSM bands) Two versions of go2INTERCEPT (passive) are avai-
and passive solution, meaning that absolutely no- lable either in a 2U format for low cost application
thing is sent to intercept. It makes this solution com- (up to 20 full duplex simulta-neous communication)
pletely undetectable by the targets or the operators or in a 3U format to get the full power of the systems.
unlike active interception solutions in the markets.
Thanks to its dense FPGA architecture, this solution The front end can be connected to the deciphering
is able to intercept up to 60000 communications per box (go2DECIPHER) through ethernet connection
hour, which enables this solution to be suited for mas- using either Vsat, 3G or cable links. In the case of a
sive application (border control for example), the powerful deciphering box, multiple front ends can
go2INTERCEPT (passive) is able to demodulate and be connected.
decipher in real time up to 320 duplex communication.
Key features
2G and 2,5G
voice interceptions
Up
wn
L
ink
Do
Up to 60000 intercepted
Key exchange
communications per hour (Ethernet, GPRS or satellite)
3
Passive version: GSM interception
Filtering abilities
Provider selection
No limit on frequency hopping and real time Optional speaker identification thanks to biomet-
handover management ric voiceprint technique
BITE
4
Active basic version: IMSI catcher
The equipment clones a neighboring cell (BTS or Cell cloning is pursued thanks to an advanced au-
Node-B) with user controlled parameters, forcing tomatic 2G and 3G spectrum scanner.
the surrounding mobile equipments to identify them-
selves. Once identified, the mobiles can either be The front end can be connected to the deciphering
kept within the cloned cell for further intelligence, box (go2DECIPHER) through ethernet connection
eavesdrop or send SMS in 2G, ringing the phone, using either Vsat, 3G or cable links. In the case of a
released on the original network, disabling it. powerful deciphering box, multiple front ends can
be connected.
Key features
5
Active basic version: IMSI catcher
Technical specifications
Mission Preparation
Organisation ■■ Use of predefined scenarios or manual configuration
■■ Off-line & on-line mission creation
■■ Automatic generation of scenarios from environment (quick start)
Mission options ■■ Power ramp effect
■■ Mission scheduler: multi clone start / stop
■■ Ability to follow a moving target with continuous adaptation of clones to the environment (roaming)
Tools ■■ 2G/3G fast scanning, advanced configuration & cloning tool
■■ Clone coverage indicator
Catching
Capacity Multi-cells, multi-operators, multi-bands: GSM-900, DCS-1800, UMTS 900 and UMTS- 2100
(other frequency bands on request)
Action and data gathering ■■ IMSI and IMEI
■■ New contact / previously catched IMSI highlight
■■ Multi localization
■■ SMS (send / receive) (2G only)
■■ Ringing for localization purpose (2G only)
■■ Presence management (2G only)
■■ Silent call for localization purpose
■■ Blocking (2G only) / disabling of the mobile
■■ Forcing target from 3G to 2G
■■ Interception of called numbers (2G only)
■■ Listening of ambient sounds (2G only)
■■ Searching of mobile location with display on a map
Administration
Station Semi-ruggedized laptop
Post-analysis ■■ Inter-case / inter-mission search
■■ Multiple catched IMSI and IMEI focus
■■ Wild card search
■■ Data base export
■■ Eavesdropped SMS search / export
■■ Display of Vortex-Air location when capturing
Contact identifications ■■ IMSI & IMEI full or partial
■■ Attributes (photos, notes, friends, enemies and associated actions [block, unblock, disable])
User profile User restriction or full access
Packages
Pack 1 - pedestrian: backpack configuration ■■ 2 omnidirectional antennas and 1 high gain directional antenna
with enhanced battery autonomy ■■ 1 hot-swap battery (1.5 hour) with charger
■■ Back rack
Pack 2 - vehicle: installation in a vehicle with ■■ 2 omnidirectional antennas and 2 high gain directional antennas
enhanced autonomy and high coverage ■■ Lighter adapter
Pack 3 - fixed: monitoring and site protection 2 omnidirectional antennas and 2 high gain directional antennas
Physical specifications
Dimnesion 400 x 268 x 80 mm
Weight 5.3 kg
Energy 110/220 V AC (power supply provided) or 9/24 V DC
< 140 W
Power
Amplifier 40W at 900 MHz, 60W at 1800 MHz, 100 W at 2100 MHz
Antenna output 10 W mean in the band, up to 20 W peak
6
Active extended version: IMSI catcher and voice interception
Key features
Extract the phone identities – IMSI, IMEI, MSISDN Change the content of target SMS
Collect the identities (IMSI/IMEI) of all phones in Send fake SMS to target, or on behalf of
area of interest a target
Alert about presence of target phones in the area Locate phones/target position
Blocks phone communication – for all phones or Disable GSM activated explosive devices
selectively
Covers multiple GSM and 3G networks
Intercept multiple calls and SMS simultaneously simultaneously
in random and target mode (inbound and out-
Handles effectively any network encryption
bound communication)
(A5.0, A5.2, A5.1, A5.3)
Disconnect designated calls
Tactical design for intuitive operation, easy
Reroute calls and SMS to designated destination transport and fast deployment
7
Active extended version: IMSI catcher and voice interception
Description
go2INTERCEPT (active extended) is designed to nes or only designated phones) and consequently
perform man-in-the-middle attacks for mobile pho- controls the phones communication.
nes over GSM (2G, 2.5G) and UMTS (3G) networks.
As such, the system is used to extract the target
The system emulates a real cell (base station) attemp- identity, to track the target location, to monitor the
ting the surrounding phones to select and register target communication and to manipulate the target
to the fake cell. As a result, the system becomes phone in advanced methods.
the serving cell of the surrounding phones (all pho-
Typical applications
go2INTERCEPT (active extended) conducts seam- The system can block the communication of all
less interception of target inbound and outbound phones in a certain area or to block the communi-
and SMS over GSM networks with-out cooperation cation of only specific phones.
or authorization from the GSM operator. The system
can monitor as much targets as required and hand-
le multiple live calls simulta-neously. Find a target
Reroute calls and SMS from/to the target. Once the phone moves to the GSM network, the
GSM module takes over and conducts the intercep-
Change SMS content that was sent from/to the tion of the target as well as all other actions that are
target. described above.
8
Active extended version: IMSI catcher and voice interception
Each GSM module works on a specific band (e.g. Installed on a standard laptop, the software (SW)
850, 900, 1800, 1900 MHz) and can emulate one management application allows conducting all
GSM network at a time. It is possible to change the tasks related to the system, to monitor in real time
emulated network on the fly. If there is a need to the intercepted calls and to record all calls and in-
work on several networks in parallel or the networks terrogated information. The SW application includes
are using different bands, then several GSM modu- also a back-office that presents all logged data and
les are required in the system. conduct applicable queries on the collected data.
Each 3G module works on a specific band (e.g. To boost the transmission signal of the system, the
850, 1900, 2100 MHz) and can emulate one 3G system includes 4W integrated power amplifiers
network at a time. It is possible to change the emu- per each GSM module and 25W integrated power
lated network on the fly. If there is a need to work amplifiers per each 3G module.
on several networks in parallel or the networks are
using different bands and/or multiple UMTS chan-
nels, then several UMTS modules are required in
the system.
Routing modems
9
Active extended version: IMSI catcher and voice interception
Most GSM networks are using A5.1 or A5.2 encryp- In certain cases when more transmission power is
tion protocol to enhance the privacy measures for required to extend the effective range of the sys-
its subscribers calls. tem, it is possible to connect 25W external GSM
power amplifier.
Yet, some networks allow calls to be conducted
with no encryption (AKA A5.0) when the phone
does not support the encryption protocol. External antennas
When A5.0 is allowed in the network, go2INTERCEPT Various types of antennas can be deployed and
(active extended) reduces all intercepted calls to used for the system operation. The selection of an-
A5.0 and does not need any external breaker, how- tennas depends on the operation scenario and the
ever, in cases were the network does not allow to system setup such as magnetic omni-antennas
reduce to A5.0, it will be mandatory to connect the when patrolling with a vehicle in and urban area or
system to an A5.1/A5.2 breaker that breaks in real hi-gain directional antenna installed on a tripod or
time the encrypted key (AKA Kc) in order to allow mast in a long-range operation.
the interception of the call or SMS.
System specifications
10
Part of the product line
11
... monitoring a connected world
PLATH AG
Stauffacherstrasse 65
3014 Bern
Switzerland
Tel: +41 31 311 6446
Fax: +41 31 311 6447
Email: info@go2signals.ch
Further information on www.go2signals.ch