Professional Documents
Culture Documents
Kalai Updated Resume (+91-7708216474) in India
Kalai Updated Resume (+91-7708216474) in India
Kalai Updated Resume (+91-7708216474) in India
G
Vandaiyar st,
Thirumangala kottai east,
Orathanadu (tk),
Thanjavur (dt), pin code:614905.
B.E in Mechanical Engineering
E-mail: kalaikumar89@gmail.com
CAREER OBJECTIVE:
To pursue a challenging career in a leading corporate where my inherent traits and skills are
groomed and utilized to cater the growing business needs towards the accomplishment of
organizational goal.
EDUCATION PROFILE:
B.E in Mechanical Engineering with first class (70%) from Anna University, 2011.
S.S.L.C with second class (58%) from Govt Hr. Sec. School, Thirumangalakkottai east, 2005.
PROFESSIONAL EXPERIENCE:
COMPANY PROFILE:
Manufacturer of fabricated Auto welded Boiler Supporting columns, wind mill towers, Steel
plant, power plant equipments General structures , oil and gas piping works.
ROLES & RESPONSIBILITIES:
Perform all required inspections as per the requirements of quality control plan and test plan
maintaining relevant documents as per project specification.
Raw material inspection and stamping, layout verification to ensure the compliance with the drawing.
Raw material identified and can be traced to a test certificate.
Check raw materials In suitable condition (free from damage and contamination).
Ensure Stamping, Cutting Plan Layout Each And Every Individual Pieces and balance material Of
Raw Material.
Raw Material Test Certificate Numbers, Invoice Numbers, Grad Numbers, Cutting Plan Layout
Individual Size and balance size Enter On daily Book Register.
Check approved Wps available inspectors.
Welding Equipment In Suitable Condition And Calibrated As Appropriate.
Welding Preparation In Accordance With Wps And Drawing.
Welding Consumable Those To Be Used Are As Specified By The Wpss,Are Stored/Controlled As
Specified By The Qc Procedure.
Joint Fit-Ups In Accordance With Wps/Drawing Tack Welds Are To Good Workmanship Standard
And To Code /Wps.
Weld Face Free From Defects, Contamination And Damage.
Preheat Minimum Temperature Is In Accordance With Wps.
Inter-pass Temperature Maximum Temperature Is In Accordance With Wps.
Surveillance for storage and handling of welding consumables.
Welding Parameters Current, Volts Travel Speed Are In Accordance With Wps.
Identifying the root causes of the welding related problems and taking the corrective and preventive
actions.
Gouging/Grinding By An Approved Method And To Good Workmanship Standard.
Inter-run Cleaning To Good Workmanship Standard.
Monitoring of welders performance and repair control.
Carried out LPT , MPI, RT FILM REVIEW & UT with clients.
Report for daily inspection and Reporting testing activities to higher authority.
Weld Identification Each Weld Is Marked with the Welder’s Identification And Is Identified In
Accordance With Drawing/Weld Map.
Weld Appearance Ensure Visual And Ndt Inspection With Clients And Third Party.
Dimensional Survey Check Dimension Are In Accordance With Drawing/Code.
Ensure Any Modifications Are Included On As-Built Drawings.
Ensure All Ndt Is Completed Reports Are Available For Records.
Repairs Monitor In Accordance With The Procedure.
PWHT Monitor For Compliance With Procedure (Check Chart Record) .
Ensure All Reports/Records Are Completed And Collated As Required.
Performing welding inspection.
Individual Drawing Fit-Up Inspection, Welding Inspection, Required Ndt Inspection As Per Qcp,
Dimension Inspection, Accessories Inspection, Water Level, Sweep, And Camber Inspection Making
Check List Report Get Clearance From Inspection Authorities.
Ensure Individual Job Identification Stamping On Individual Pieces.
Trail Assembly Drawing Dimension Inspection, Water Level, Sweep, Camber Inspection, Inner Filler,
And Outer Filler Stamping Job Identification Details Making Check List Report Get Clearance From
Inspection Authorities.
Perform Customer Approval Painting Scheme Witness Of Surface Preparation, Primary Coat,
Intermediate Coat, Final Coat, And Stenciling To Make Each And Every Stage Inspection Report Get
Clearance From Inspection Authorities.
PROJECTS HANDLED :
Experienced in manufacturing & supply of Heavy Steel Fabrication Engineering Equipment’s, structural
and sheet metals. Its activities are spread to cater the various Industries like - Power, Steel, Cement, Mining, Oil
and Gas, Petrochemicals, Refineries, Railways, etc.
Power Projects: Boiler Supporting Structures, Different Types of Ducts, Trusses, Feed Hoppers, and
Bracings Dry pet set, Heavy Columns, Gantries, Cable Trays andAccessories.
NTPC: NORTH KARANPURA THROUGH BHEL
NTPC: SHOLAPUR THROUGH BGR( DUCTS).
CUSTOMER&INSPECTION HANDLING:
TUV
IRS
RITES
TECHNICAL SKILLS:
NDE Level II Certificate as per American society for non destructive testing ASNT-TC-1A ON,
Visual testing(VT)
Dye penetrant testing(DPT)
Magnetic particle testing(MPT)
Ultrasonic testing(UT)
Radiographic testing(RT)
TECHNICAL EXPERTISE:
MS OFFICE
CSWIP 3.1
PASSPORT DETAILS;
DECLARATION:
I hereby declare that the information furnished above is true to the best of my knowledge.
Kalaikumar.G
Signature