Professional Documents
Culture Documents
Study On Concrete Using Fiber Reinforcement
Study On Concrete Using Fiber Reinforcement
REINFORCEMENT
Submitted by
BACHELOR OF ENGINEERNG
IN
CIVIL ENGINEERING
BACHELOR OF ENGINEERNG
IN
CIVIL ENGINEERING
BONAFIDE CERTIFICATE
First and foremost we would like to express power sincere and grateful
thanks to the Almighty GOD, who has given us the great opportunity, power of
knowledge and strength to complete this project successfully. We wish to express
our heartfelt regards and sincere thanks to out beloved Dean Dr. PETER
DEVADAS Ph.D., for his constant encouragement during the course of this
project work. We express our deep sense of gratitude to our beloved & eminent
head of the department in civil engineering Dr.S.MANIMEGALAI M.E.Ph.D.,
and was a pillar of support for successful completion of the project without her
able support and guidance we would not have successfully complete our project.
We thank our internal guide Dr. S. RAJAKUMAR M.E. Ph.D., for guiding
us from the beginning till the end with patience and special thanks to
Dr.S.MANIMEGALAI M.E.Ph.D., in University V.O.C. College of Engineering
for their valuable advice which helped us in completing the project with hope and
confidence. Finally, we also thank our parents friends, all our teaching and all who
participated enthusiastically with their constructive criticism either directly or
indirectly making this project a grand success.
TABLE OF CONTENTS
ABSTRACT i
LIST OF TABLE ii
LIST OF FIGURE iii
1. INTRODUCTION
1.1 GENERAL 1
1.2 LOCATION DETAILS 1
1.3 IRC CODE 65-2017 2
1.4 NEED FOR THE STUDY 2
1.5 OBJECTIVE OF THE STUDY 2
2. DESIGN PROCEDURE
2.1 GENERAL 3
2.2 METHODOLOGY 3
2.3 STUDY AREA 3
2.4 RECOMMENDED PRACTICE
FOR TRAFFIC ROTARY 3
2.4.1 AT-GRADE JUNCTION 4
2.4.1 DEFINTION 4
2.4.2 ADVANTAGES 5
2.4.3 DISADVANTAGES 5
2.5 GUIDELINES FOR SELECTING A
ROTARY TYPE OF INTERSECTION 6
2.6 PARAMETERS TO BE CONSIDERED
2.6.1 RADII OF CURVES AT ENTRY 7
2.6.1 RADIUS OF CURVE AT EXIT 7
2.6.2 RADIUS OF CENTRAL ISLAND 8
2.6.3 WEAVING LENGTH 8
2.6.4 WIDTH OF CARRIAGE
WAY AT THE ENTRY AND EXIT 8
2.7 WIDTH OF CARRIAGE WAY
2.7.1 WIDTH OF NON-
WEAVING SECTION 9
2.7.2 WIDTH OF WEAVING SECTION 9
2.7.3 ENTRY AND EXIT ANGLES 10
2.7.4 CAPACITY OF THE ROTARY 10