Professional Documents
Culture Documents
In-Sight Explorer Job Create
In-Sight Explorer Job Create
PAN Verification
3. Click “Set up image” then click on “ Trigger”. Now you can see the card place inside the module.
Select Trigger option “Manual”. Set Auto Exposure as “Continuous”.
Page 1 of 7
In-Sight Explorer Job Creation
4. Go to “Inspect Part” then go in tool > Identification Tool> Read Text(ORC Max) dibble click on
it. it will create a rectangular window on card surface. Rotate the window to make the axis
Page 2 of 7
In-Sight Explorer Job Creation
5. Save the Job and name it “PAN”.
Before saving the job enable the flag “Start the Sensor in Online Mode” and Save the job.
Page 3 of 7
In-Sight Explorer Job Creation
How to train camera and save it
When you run a job MCP send that field data to In-Sight Explorer to verify. But you need to train
camera to verify every character and save it in that job.
1st time when launch the job MCP will give the error than you need to go In-Sight Explorer and
train the camera job.
In Match String find the data coming from MCP copy that Data.
Go Training Tab past that data in Train String, then click Train All.
Then save the job.
Page 4 of 7
In-Sight Explorer Job Creation
How to create a job to verify logo
It will create 2 rectangular on card. With small rectangular select the logo and with other
rectangular select the small rectangular surface. Then click ok.
Page 5 of 7
In-Sight Explorer Job Creation
How to create a ReadBack job:
1. Go to “Inspect Part” then go in tool > Identification Tool> Read Text(ORC Max) dibble click
on it. it will create a rectangular window on card surface. Rotate the window to make the
In edit tool option go to settings tab and select Inspect mode as Read.
Page 6 of 7
In-Sight Explorer Job Creation
Before saving the job enable the flag “Start the Sensor in Online Mode” and Save the job.
Page 7 of 7
In-Sight Explorer Job Creation