Carson City Nv 89706 Phone: 888-543-6302 www.ftecu.com / sales@ftecu.com
User Guide: FT ECU Bench Flashing Kit
If you have not yet done so, please visit the
FTECU Inc. Interactive Quick-Start Guide to get you started. https://ftecu.com/quickstart/
Once you have logged into the Tuning Suite
with your registered kit and have your tune file set, to flash your ECU, do the following.
Step 1: Remove components to expose your fuel
injection ECU, ECU connectors and battery terminals
Step 2: Connect the Data-Link USB to your computer.
Connect the Bench Flashing Harness to the Data-Link USB. Then connect the wall mounted o power supply to the Bench Flashing Harness. m Fig1. Bench Flashing Harness Disconnected from ECU l.c Note: When going through the writing or reading process it is very important to follow the software prompts carefully. You will be ai
asked to disconnect and reconnect the Bench
Flashing Harness. (See Fig1 & Fig2). When prompted you will need to disconnect and gm
reconnect the Bench Flashing Harness from the
ECU only. Do not disconnect from the Data- Link USB or wall mounted power supply during the writing process. @
Step 3: Once the writing process has completed you
will receive a ‘Write Successful! You may a
disconnect’ message, at this time you can
disconnect from the ECU. ay
Step 4: Install the ECU back into your bike and have fun Fig2. Bench Flashing Harness f ka