Professional Documents
Culture Documents
Health Unit Egmore
Health Unit Egmore
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Sr.DEN/CO-ORD./MAS acting for and on behalf of The President of India invites E-Tenders against Tender No MAS03OF24011B
Closing Date/Time 23/02/2024 11:00 Hrs. Bidders will be able to submit their original/revised bids upto closing date and time only.
Manual offers are not allowed against this tender, and any such manual offer received shall be ignored.
1. NIT HEADER
Construction of New Health Unit at Chennai Egmore in lieu of re-locating the existing heath
Name of Work
unit in connection with Chennai Egmore station development project.
Bidding type Normal Tender
Tender Type Open Bidding System Single Packet System
Tender Closing Date Time 23/02/2024 11:00 Date Time Of Uploading Tender 02/02/2024 19:00
Pre-Bid Conference
No Pre-Bid Conference Date Time Not Applicable
Required
Advertised Value 38518622.58 Tendering Section BUILDINGS
Single Rate for Each Schedule
Bidding Style Bidding Unit
Item
Earnest Money (Rs.) 342600.00 Validity of Offer ( Days) 30
Tender Doc. Cost (Rs.) 0.00 Period of Completion 12 Months
Contract Type Works Contract Category Expenditure
Are Joint Venture (JV) firms
Bidding Start Date 09/02/2024 No
allowed to bid
Ranking Order For Bids Lowest to Highest Expenditure Type Capital (Works)
2. SCHEDULE
S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Code
Schedule A-List of items of work that are covered under CPWD DSR 2021 rates - for
27755244.25
Chennai Division
Above/
Please see Item Breakup for details. 27755244.25 AT Par 27755244.25
Below/Par
01
Description:- Construction of New Health Unit at Chennai Egmore in lieu of re-locating the existing heath unit in
connection with Chennai Egmore station development project
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule B-S & T SOR items 345458.14
Above/
Please see Item Breakup for details. 164951.60 109.43 345458.14
Below/Par
01
Description:- Schedule for S & T arrangements in connection with Proposed construction of New Railway health
unit at Chennai Egmore (MS)
S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Code
Schedule C-Electrical Arrangements- Construction of new health unit at Chennai Egmore. 811510.00
Above/
01 180.00 cum 186.00 33480.00 AT Par 33480.00
Below/Par
01 Description:- Excavation of Cable trench in all kinds of soils duly removing all obstructions in the way of cable
trench, dumping at embankment site within railway land complete as per specifications enclosed and in a manner
as directed by the Section Engineer in charge at site. NOTE: The Section Engineer, in charge at site, will indicate
the route of cable trench.
Above/
02 180.00 cum 36.00 6480.00 AT Par 6480.00
Below/Par
Description:- Re-filling of trench with excavated earth, ramming, consolidation and bringing back the surface to
02
original condition complete in a manner as directed by the Section Engineer in charge at site.
Pa g e 1 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Above/
03 10.00 cum 533.00 5330.00 AT Par 5330.00
Below/Par
03
Description:- Demolishing plain cement concrete in platform or elsewhere, disposal of material within railway
land complete in a manner as directed by the Section Engineer in charge at site.
Above/
04 10.00 cum 5541.00 55410.00 AT Par 55410.00
Below/Par
04 Description:- Supply and provision of mass concrete for platforms or elsewhere with 1:2:4 ratio using 20mm
blue metal complete in a manner as directed by the Section Engineer in charge at site. NOTE: Cement shall be
Ordinary Portland Cement, 43 grade, conforming to IS: 456 or latest.
Above/
05 250.00 Metre 29.00 7250.00 AT Par 7250.00
Below/Par
05 Description:- Laying of 63 mm dia ISI Marked High Density PolyethylenePipes in the excavated trench, clamping
on walls / Steel members of platform shelter or elsewhere using suitable fixing arrangement complete in a
manner as directed by Senior Section Engineer-in-charge at site. Note: HDPE pipe alone will be supplied
departmentally.
Above/
06 250.00 Metre 45.00 11250.00 AT Par 11250.00
Below/Par
06 Description:- Laying/leading of 4 core 185 sq.mm cross linkedpolyethylene [XLPE] LTUG Aluminium cable in the
excavated trench, threading through pipe, clamping on wallsorels ewhere and terminating in as many ends using
suitable singlecompression cable glands and sockets complete in a manner as directed by Section Engineer in
charge at site. Note: LTUG Aluminium cable alone will be supplied Departmentally.
Above/
07 150.00 Metre 39.00 5850.00 AT Par 5850.00
Below/Par
07 Description:- Laying/leading of 4 core 70 sq.mmcross linkedpolyethylene [XLPE] LTUG Aluminium cable inthe
excavated trench, threading through pipe, clamping onwallsorelsewhere and terminating in as many ends using
suitable singlecompression cable glands and sockets complete in a manner as directed by Section Engineer in
charge at site. Note: LTUG Aluminium cable alone will be suppliedDepartmentally.
Above/
08 150.00 Metre 18.00 2700.00 AT Par 2700.00
Below/Par
08 Description:- Leading / Laying of 4 core 50 sq. mm cross linkedpolyethylene [XLPE] LTUG Aluminium cable in
the excavated trench, threading through pipe, clamping on walls or elsewhere and terminating in as many ends
usingsuitable singlecompression cable glands and sockets complete in a manner as directed by Senior Section
Engineer in charge at site. Note: LTUG cable alone will be supplied departmentally.
Above/
09 150.00 Point 277.00 41550.00 AT Par 41550.00
Below/Par
Description:- Wiring to light, fan, exhaust fan points [Long point i.e.length between 6 to 10mtr] by supply and
09 drawing of 2runs of 1.5 sq. mm fire retardant Low smoke PVC insulated copper multi-stranded copper cables
of1100 V grade [conforming to IS: 694/1990 or latest]duly inside the PVC conduit concealed / laid vide itemNo.
19below complete with provision of 1 No.3 plate ceiling rose conforming to IS: 371/1999 or latest and with all
standard accessories and in aManner as directed by Section Engineer in charge at site.
Above/
10 150.00 Point 269.00 40350.00 AT Par 40350.00
Below/Par
Description:- Wiring to light, fan, exhaust fan points [Medium point i.e. length between 3 to 6mtr] by supply and
10 drawing of 2 runs of 1.5 sq. mm Fire Retardant Low Smoke PVC insulated copper multi-stranded copper cables
of1100 V grade [conforming to IS: 694/1990 or latest]duly inside the PVC conduit concealed vide item No.
19belowcomplete with provision of 6 A flush type switch conforming to IS: 3854/1997 or latest, 1No. 3 plate
ceiling rose conforming to IS: 371/1999 or latest and with all standard accessories and in a manner as directed
by Section Engineer in charge at site.
Above/
11 100.00 Point 155.00 15500.00 AT Par 15500.00
Below/Par
Description:- Wiring to light, fan, exhaust fan points [Short point i.e. length up to 3mtr] by supply and drawing of
11 2runs of 1.5 sq. mm Fire Retardant Low Smoke PVC insulated copper multi-stranded copper cables of1100 V
grade [conforming to IS: 694/1990 or latest]duly inside the PVC conduit concealed/laid vide item No. 19 below
complete with provision of 1 No.3 plate ceiling rose conforming to IS: 371/1999 or latest and with all standard
accessories and in a Manner as directed by Section Engineer in charge at site.
Above/
12 1.00 Numbers 1000.00 1000.00 AT Par 1000.00
Below/Par
12
Pa g e 2 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Description:- Fixing of vertical TPN MCCB/MCB DB's with Four pole MCCB along with Four pole changeover
switch etc. as Incomer along with 4 No's of 200A FP MCCB's, 4 No's of 125A FP MCCB's, 2 No's of 100A FP
MCCB's, 2 No's of 63A FP MCCB'sor combination of multifunction meter or MCCBs as feeder controls or
elsewhere using suitable angle iron frame work and other accessories required complete in a manner as directed
by Section Engineer in charge at site. Note: MCCB DB, MCCB, COS, Multifunction Meter, etc. alone will be
supplied Departmentally.
Above/
13 8.00 Numbers 1000.00 8000.00 AT Par 8000.00
Below/Par
13 Description:- Fixing of TPN MCB DB's with FP RCCB as incomer and along with 18 No's SP MCB's or
combination of SP MCB's as feeder control or elsewhere using suitable angle iron frame work and other
accessories required complete in a manner as directed by Section Engineer in charge at site. Note: MCB DB,
RCCB, MCB, etc. alone will be supplied Departmentally.
Above/
14 8.00 Numbers 1000.00 8000.00 AT Par 8000.00
Below/Par
14 Description:- Fixing of TPN MCB DB's with FP MCB as incomer and along with 12 No's SP MCB's or
combination of SP MCB's as feeder control or elsewhere using suitable angle iron frame work and other
accessories required complete in a manner as directed by Section Engineer in charge at site. Note: MCB DB, 63A
MCB, 16A MCB, etc. alone will be supplied Departmentally.
Above/
15 40.00 Numbers 1500.00 60000.00 AT Par 60000.00
Below/Par
15 Description:- Supply and recess mounting of single phase 20 A, 2pole and earth metal clad plug and socket box
type unit in sheet steel enclosure conforming to IS: 8623/1993 or latest and with all standard accessories
required complete in a manner as directed by section engineer in charge at site.
Above/
16 120.00 Numbers 200.00 24000.00 AT Par 24000.00
Below/Par
Description:- Fixing of the BLDC ceiling fan onto the buildings or elsewhere using suitable clamping
16 arrangement including supplyconnection from ceiling rose by using 3 core 1.0 sq. mm fireretardant Low smoke
PVC insulated, PVC round sheathedcopper [White / Ivory colour] conductor flexible pendant chord complete in a
manner as directed by Senior Section Engineer in charge at site. Note: BLDC Ceiling fan alone will be supplied
departmentally.
Above/
17 200.00 Numbers 40.00 8000.00 AT Par 8000.00
Below/Par
17 Description:- Provision of 4 feet 18 - 20w LED light fitting using suitable mounting arrangement including supply
connection from ceiling rose by using 3 core 1.0 sq. mm Fire Retardant Low Smoke PVC insulated, PVC round
sheathed copper White/Ivory colour] conductor flexible pendant chord in a manner as directed by Section
Engineer in charge at site. Note: 4 feet LED light fitting with lamp alone will be supplied Departmentally.
Above/
18 16.00 Numbers 400.00 6400.00 AT Par 6400.00
Below/Par
Description:- Provision of the 80-100 Watts LED street light fittings using suitablefixing arrangements onto
18 existing / new lamp posts/elsewhereincluding wiring from the distribution board provided in thelamp post to light
fitting using 3 runs of 1.5 sq. mm ofFRLSPVC insulated single core multi stranded copper Conductor of 1100 V
grade confirming to IS: 694/1990 orlatestin a manner as directed by Section Engineer in charge at site. Note:
LED Street light fittings alone will be supplied departmentally
Above/
19 1500.00 Metre 38.00 57000.00 AT Par 57000.00
Below/Par
Description:- Supply and concealing (or fixing at specified locations as decided by SSE/JE in-charge at site) of
19 25 mm dia rigid PVC conduits [IVORY colour] confirming to IS: 9537/P3/1983 or latest [ISI Marked] with wall
thickness not less than 2.0 mm along with all accessories and including cutting/ chipping the wall/ceiling or
elsewhere and making good the same /clamped at regular intervals, not exceeding 500 mm in a manner as
directed by Section Engineer in charge at site and as per specification for wiring/ rewiring enclosed.[Approximate
length of PVC conduit]
Above/
20 520.00 Numbers 54.00 28080.00 AT Par 28080.00
Below/Par
20 Description:- Supply of 6A Modular switches conforming to IS:3854/1997or latest and provision of the same on
to the modular switch boards vide item number24,25 and 26 below in a manner as directed by SectionEngineer-
in-charge at site.
Above/
21 200.00 Numbers 121.00 24200.00 AT Par 24200.00
Below/Par
Description:- Supply of 6A, modular sockets conforming to IS:1293/ 2005 or latest and provision of the same
21
onto the modular switch boards vide item number 24,25 and 26 below in a manner as directed by Section
Engineer-in-charge at site.
Pa g e 3 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Above/
22 100.00 Numbers 102.00 10200.00 AT Par 10200.00
Below/Par
22 Description:- Supply of 16A Modular switches conforming to IS:3854/ 1997 or latest and provision of the same
on to the modular switch boards vide item number 24,25 and 26 below in a manner as directed by Section
Engineer-in-charge at site.
Above/
23 100.00 Numbers 180.00 18000.00 AT Par 18000.00
Below/Par
23 Description:- Supply of 16A, modular sockets conforming to IS:1293/2005 or latest and provision of the same
onto the modular switchboards vide item number 24,25 and 26 below in a manner as directed by Section
Engineer-in-charge at site.
Above/
24 60.00 Numbers 141.00 8460.00 AT Par 8460.00
Below/Par
Description:- Supply of modular frame plate with matching coverplatesuitable for 6 modules and accommodated
24 onto suitable modular switch board box made of 1.2mmthick GI Sheet complete and recess mounting/concealing
the same onto the wall using suitablefixing arrangements including cutting/ chipping/making recess on the wall or
elsewhere and painting etc., in a manner as directed by Section engineer in charge at site. Note: - 1 No. frame
plate with matching coverplate and 1 No. Modular GI box are taken as 1 Nofor quantity purpose.
Above/
25 60.00 Numbers 165.00 9900.00 AT Par 9900.00
Below/Par
Description:- Supply of modular frame plate with matching cover plate suitable for 8 modules and
25 accommodated onto suitable modular switch board box made of 1.2mmthick GI Sheet complete and recess
mounting/concealing the same onto the wall using suitablefixing arrangements including cutting/ chipping/making
recess on the wall or elsewhere and painting etc., in a manner as directed by Section engineer in charge at site.
Note: - 1 No. frame plate with matching cover plate and 1 No. Modular GI box are taken as 1 No for quantity
purpose.
Above/
26 30.00 Numbers 184.00 5520.00 AT Par 5520.00
Below/Par
Description:- Supply of modular frame plate with matching cover plate suitable for 12 modules and
26 accommodated onto suitable modular switch board box made of 1.2mmthick GI Sheet complete and recess
mounting/concealing the same onto the wall using suitablefixing arrangements including cutting/ chipping/making
recess on the wall or elsewhere and painting etc., in a manner as directed by Section engineer in charge at site.
Note: - 1 No. frame plate with matching cover plate and 1 No. Modular GI box are taken as 1 No for quantity
purpose.
Above/
27 1500.00 Metre 75.00 112500.00 AT Par 112500.00
Below/Par
Description:- Supply and drawing of inside mains using 2 runs of 4sq. mm [from MCB DB to switch boards and
27 from switch boards to switch boards / modular furniture]Fire Retardant Low Smoke PVC insulated
unsheathedmulti-stranded copper conductor cables of 1100Vgrade [conforming to IS:694/1990 or latest] duly
insidethe PVC conduit concealed / laid vide item No. 19above complete as per the specification enclosed and in a
manner as directed by Section Engineer in charge at site. Note: - 2 runs of 4 sq. mm copper conductor are taken
as 1m for quantity purpose.
Above/
28 1500.00 Metre 98.00 147000.00 AT Par 147000.00
Below/Par
Description:- Supply and drawing of inside mains using 2 runs of 6sq. mm [from MCB DB to MCB DB / MC
28 sockets] Fire Retardant Low Smoke PVC insulated unsheathed multi-stranded copper conductor cables of
1100Vgrade [conforming to IS:694/1990 or latest] duly inside the PVC conduit concealed / laid vide item No. 19
above complete as per the specification enclosed and in a manner as directed by Section Engineer in charge at
site. Note: - 2 runs of 6 sq. mm copper conductor are taken as 1m for quantity purpose.
Above/
29 3000.00 Metre 14.00 42000.00 AT Par 42000.00
Below/Par
Description:- Supply and drawing of earth wire by using 1.5 sq.mm Fire Retardant Low Smoke PVC insulated
29 [green colour] unsheathed single copper conductor cables of1100 V grade conforming to IS: 694/1990 or latest
duly along the wires vide item Nos. 27 and 28 above and from MCB DB to switch boards and switch boards to
lights and fan points vide item No. 09,10 and 11 above in a manner as directed by Section Engineer incharge at
site.
Above/
30 15.00 Numbers 300.00 4500.00 AT Par 4500.00
Below/Par
30 Description:- Fixing of exhaust fan including supply connection from ceiling rose by using 3 core 1.0 sq. mm Fire
retardant PVC insulated, PVC round sheathed copper(White/Ivory colour) conductor flexible pendant chordin a
manner as directed by Section Engineer in charge at site. Note: Exhaust fan alone will be supplied departmentally
Above/
31 6.00 Numbers 600.00 3600.00 AT Par 3600.00
Below/Par
Pa g e 4 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
31 Description:- Fixing of geyser using suitable wall mounting arrangement including supply connection from
modular socket by using 3 core 1.0 sq. mm Fire Retardant Low Smoke PVC insulated, PVC round sheathed
copper White/Ivory colour] conductor flexible pendant chord in a manner asdirected by Section Engineer in
charge at site. Note: Geyser alone will be supplied departmentally.
S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Schedule D-S&T arrangements - Construction of new health unit at Chennai Egmore. 4283336.44
Above/
01 700.00 Metre 43.00 30100.00 AT Par 30100.00
Below/Par
01 Description:- Excavation of cable trenches in all kind of soil except hard rocky areas, including cleaning of roots
of trees, rocks, bushes etc., to a depth of 0.5 Mtrs and to a width of 0.3 Mtrs. This schedule includes refilling of
cable trench
Above/
02 15.00 cum 4685.10 70276.50 AT Par 70276.50
Below/Par
02 Description:- Concreting on Railway cables/S&T gears with 1:3:6 good quality of cement, sand, stone chips to be
used for concreting purpose of size 12mm approx massonary work. All materials required for execution of the
work will be supplied by firm as per site engineer. This includes water curing of concreted portion for minimum 3
days. Associated work of digging etc. to be done by contractor.
Above/
03 100.00 Metre 196.00 19600.00 AT Par 19600.00
Below/Par
03
Description:- Cutting of Trench across/on the platform/Wall for a depth of 10 cm & 10 cm breath with marble
cutting machine and filling the trench after cable laying and restoring surface as it was with similar material etc.
Above/
04 9150.00 Metre 27.44 251076.00 AT Par 251076.00
Below/Par
04
Description:- Supply of UTP CAT 6 cable 23 AWG as per EIA/TIA-568-C.2 standard or latest with OEM test
report. (Molex/DAX/Legrand or better make) . (Inspection by consignee)
Above/
05 400.00 Metre 38.57 15428.00 AT Par 15428.00
Below/Par
05
Description:- Supply of 12 core Unarmoured Optical fibre cable for indoor as per specification enclosed in the
tender document (Mnimumum coil length 1000m)(Inspection by consignee)
Above/
06 500.00 Metre 95.00 47500.00 AT Par 47500.00
Below/Par
06
Description:- Supply of Power cable 3 core, 2.5 sq mm, multistrand cable as per IS 694:1990 reaffirmed 1995 or
latest shall be of reputed make like Havells, Finolex, Orbit, Polycab or better. (inspection by consignee).
Above/
07 1000.00 Metre 37.25 37250.00 AT Par 37250.00
Below/Par
07 Description:- Supply of Switch board 6 pair cable 0.5 mm dia, solid annealed tinned copper conductor with PVC
insulation and PVC sheathing confirming to TEC specification GIR WIR-06/03 March 2002 or latest with OEM test
report. Finolex/Deltron or better make (inspection by consignee).
Above/
08 1000.00 Metre 60.00 60000.00 AT Par 60000.00
Below/Par
08 Description:- Supply of Switch board 10 pair cable 0.5 mm dia, solid annealed tinned copper conductor with PVC
insulation and PVC sheathing confirming to TEC specification GIR WIR-06/03 March 2002 or latest with OEM test
report. Finolex/Deltron or better make.(inspection by consinee).
Above/
09 200.00 Metre 102.81 20562.00 AT Par 20562.00
Below/Par
09 Description:- Supply of Switch board 20 pair cable 0.5 mm dia, solid annealed tinned copper conductor with PVC
insulation and PVC sheathing confirming to TEC specification GIR WIR-06/03 March 2002 or latest with OEM test
report. Finolex/Deltron or better make. (Inspection by consignee).
Above/
10 12250.00 Metre 12.00 147000.00 AT Par 147000.00
Below/Par
10 Description:- Laying/blowing/pulling/drawal of STP cable/OFC cable/Power cable/Co-axial cabIe/switch board
cable through the conduit pipe or Cable trough/tray. Other accessories required for carrying this work are to be
arranged by the contractor. (This includes Transportation of materials from Nominated stores to site)
Above/
11 3000.00 Metre 49.00 147000.00 AT Par 147000.00
Below/Par
11
Pa g e 5 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Description:- Supply and Fixing/laying of 32 mm PVC conduit pipe (ISI mark) conforming to IS:9537 medium or
latest with all accessories on wall/roofs/FOBs, Cable tray or trough etc., as per the instruction of Rly
representative at site. (This includes Transportation of materials from Nominated stores to site)(Inspection by
Consignee).
Above/
12 100.00 Metre 140.00 14000.00 AT Par 14000.00
Below/Par
12
Description:- Supply and Fixing of PVC trough of 50 mmx50mmxl.5mm thickness with cover on
wall/Roof/Partition etc as per IS 14927 Part 1 or latest.(inspection by consignee)
Above/
13 1000.00 Metre 71.25 71250.00 AT Par 71250.00
Below/Par
Description:- Supply and Laying of permanently solid lubricated HDPE pipes (33mm inner dia, 40mm outer dia)
as per Specification No. RDSO/SPN/TC/45/ 2013 with revision 2.0 ( Admt 1 &2) or latest with accessories
13 including adequate number of plastic couplers (No of couplers to make a continuous length of the lot + 20%
extra).Two numbers each of end plug, cable sealing plug and end cap shall be supplied along with each coil. One
number of duct cutter, C spanner and chamfering tool shall be supplied as per RDSO specification. HDPE duct
coil length shall be as per 1000 meter with tolerance as per specification.(inspection by consignee with OEM test
report).
Above/
14 1000.00 Metre 14.25 14250.00 AT Par 14250.00
Below/Par
14
Description:- Blowing/Drawing of OFC cable in the permanently solid lubricated-HDPE telecom pipe (33mm
Inner dia) This work includes conducting necessary duct integrity test for solid lubricated HDPE pipe.
Above/
15 1.00 Numbers 9925.00 9925.00 AT Par 9925.00
Below/Par
15 Description:- Supply and Installation of 24F Optical fibre Cable joint closure conforming to TEC spec
TEC/GR/TX/OJC/002/03 April 2010 or latest and splicing of Optic fibre cable (24 fibres) and testing of fibres for
1310 & 1550 nm.(inspection by consignee).
Above/
16 1.00 Numbers 4500.00 4500.00 AT Par 4500.00
Below/Par
Description:- Excavation of OFC cable joint pit and provision of RCC joint Loop chambers of 1.2 mtrs dia, 60cm
16 height and 50mm thickness with 2 pieces top and bottom cover with holes for drainages (reinforcement as per
DRG. No. OFC12009/17). This includes filling up of sand complete in the joint chamber after cable laying, back
filling and consolidation of soil around the chamber, disposal of excess soil as per plan or as advised by railway
engineering site.(inspection by consignee).
Above/
17 8.00 Numbers 5500.00 44000.00 AT Par 44000.00
Below/Par
17 Description:- Supply and Termination of FMS Rack mounting type 19"size for 12F with SC-PC connector loaded
with pigtails and termination and splicing of OFC cable as per Rly requirement and fixing in Rack as directed by
Engineer representative at site (OTDR readings to be taken and to be submitted for 1310 & 1550 nm). (Inspection
by consignee)
Above/
18 1.00 Numbers 40000.00 40000.00 AT Par 40000.00
Below/Par
Description:- Supply and erection of covered 19" racks (42U) size usable height and 600mm(width) x 800mm
(depth) (min) (similar to Vero president / HCL / RITTAL/Legrand or better Make) complete with all fittings including
18 DC Fan ( 48V)- 2 Nos and AC power distribution panel (horizontal fitting) with power sockets and fuse protection
(minimum 6 Nos of 230V 15A/5A combined) and other accessories. The body should be of high quality cold rolled
steel. with wheel and caster arrangement, vented from door borders and rear doors for ventilation and reliable
operation. All the accessories and fixing materials required for this installation are to be supplied by contractor
within the same cost.(Inspection by consignee)
Above/
19 2.00 Numbers 24000.00 48000.00 AT Par 48000.00
Below/Par
Description:- Supply and Fixing of Standard Rack 19 ''size width, 27U size usable height and 800mm (min)
19 depth wall mounting type front glass door and back door with lock and 2 key and Rack fixing multi point AC Power
strip with 16A MCB (min)-2 nos, cable organiser with wall fixing screws. All the accessories and fixing materials
required for this installation are to be supplied by contractor within the same cost. (Make: HCL/Vero
president/Rittal/APW President/Legrand or better). (Inspection by consignee),
Above/
20 6.00 Numbers 8730.00 52380.00 AT Par 52380.00
Below/Par
Description:- Supply and Fixing of Standard Rack 19 ''size width, 9U size usable height and 600mm (min) depth
20 wall mounting type front glass door and back cover with lock and 2 key and Rack fixing multi point AC Power strip
with 16A MCB (min)-1nos, cable organiser with wall fixing screws. All the accessories and fixing materials required
for this installation are to be supplied by contractor within the same cost. Make: HCL/Vero president/Rittal/APW
President/Legrand or better). (inspection by consignee).
Pa g e 6 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Above/
21 5.00 Numbers 12250.00 61250.00 AT Par 61250.00
Below/Par
21
Description:- Supply, Installation, testing and commissioning of 8 port POE manageable switch with two fibre
ports (1G SFP loaded) as per RDSO/SPN/TC/65/2021 Ver. 6 or latest.(inspection by consignee).
Above/
22 6.00 Numbers 48000.00 288000.00 AT Par 288000.00
Below/Par
22 Description:- Supply, Installation, Testing and commissioning of 24 port giga bit layer 2 switch 24 x 10/100/1000
BASE-T Non POE+ Ports. 4 X 1G Minimum, Optical SFP + Ports. without fiber module. Make CISCO, Model.
CBS350-24T-4G-IN or better.(inspection by consignee).
Above/
23 30.00 Numbers 8900.00 267000.00 AT Par 267000.00
Below/Par
23 Description:- Supply, Installation and Integration of single Fibre bidirectional Module similar to Cisco make code
No GLC -BX-D to suit the switches above with LC to SC-PC Patch Cords so as to suit the site requirement
minimum 10 mts Length as directed by the Railway Representative at site. (inspection by consignee)
Above/
24 30.00 Numbers 8900.00 267000.00 AT Par 267000.00
Below/Par
24 Description:- Supply, Installation and Integration of single Fibre bidirectional Module similar to Cisco make code
No GLC- BX-U to suit the switches with LC to SC-PC Patch Cords so as to suit the site requirement minimum 10
mts Length as directed by the Railway Representative at site. (Inspection by consignee).
Above/
25 40.00 Numbers 290.00 11600.00 AT Par 11600.00
Below/Par
25
Description:- Supply, Fixing and Termination of Single I/O (Make: DAX/MOLEX/KRONE/Legrand/BETTER) with
SMB and connector with shutter facility and terminating the UTP cable.(Inspection by consignee).
Above/
26 20.00 Numbers 365.00 7300.00 AT Par 7300.00
Below/Par
26 Description:- Supply, Fixing and Termination of Dual I/O box with RJ -45 socket dual information outlet with
Surface Mount Box (SMB), and RJ45 socket faceplate with shutter facility to be supplied and fixed. UTP cable
should be terminated in I/O box. Make: DAX/MOLEX/KRONE /BETTER.(Inspection by consignee).
Above/
27 50.00 Numbers 80.00 4000.00 AT Par 4000.00
Below/Par
27
Description:- Supply, Fixing and Termination of single RJ 11 I/O with SMB connector with shutter facility and
terminating the cable (Inspection by consignee).
Above/
28 50.00 Numbers 817.00 40850.00 AT Par 40850.00
Below/Par
28
Description:- Supply of electronic Push button Telephone with Caller ID and Speaker as per specification
enclosed. (inspection by consignee).
Above/
29 4.00 Set 3260.00 13040.00 AT Par 13040.00
29 Below/Par
Description:- Supply of 1+1 Push Button Telephone Beetel make or better (Inspection by consignee).
Above/
30 2.00 Numbers 54630.54 109261.08 AT Par 109261.08
Below/Par
Description:- Supply, Installation, Testing and Commissioning of 43 Inch (24x7) Industrial grade Commercial
30
Large format display TV as per specification enclosed. (All mounting arrangements, fixings, clamps, etc whatever
required for installation should be supplied by contractor), Make: Sony/LG/Samsung or better as per specification
enclosed.(Inspection by consignee).
Above/
31 4.00 Numbers 2799.00 11196.00 AT Par 11196.00
31 Below/Par
Description:- Supply of 15 meter HDMI cable (Inspection by consignee).
Above/
32 4.00 Numbers 3250.00 13000.00 AT Par 13000.00
32 Below/Par
Description:- Supply of 20 meter HDMI cable (Inspection by consignee).
Above/
33 2.00 Numbers 2700.00 5400.00 AT Par 5400.00
Below/Par
33
Description:- Supply and Fixing of HDMI to HDMI Splitters 1:4 suitable to existing video equipments. Make:
MX/D-link/ Bestnet/Dyelon or better.(Inspection by consignee).
Above/
34 60.00 Numbers 670.79 40247.40 AT Par 40247.40
Below/Par
34 Description:- Supply of OFC Patch cards single mode , simplex SC/LC-PC to SC/LC-PC connector 10 mtr length
so as to suit the site requirement as directed by the Railway Representative.(Inspection by consignee).
Pa g e 7 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Above/
35 3.00 Per Unit 520.00 1560.00 AT Par 1560.00
Below/Par
35
Description:- Supply of RJ 45 Jack or connectors (Make: DAX/MOLEX/KRONE/Legrand/BETTER) (per unit =
100 Nos/Packet).(Inspection by consignee).
Above/
36 1.00 Numbers 25000.00 25000.00 AT Par 25000.00
Below/Par
36 Description:- Supply and Provision of Special earth and bonding system as per RDSO specification.
RDSO/SPN/197 version 1.0 or latest (Supply of material shall be procured from RDSO vendor only).(Inspection by
consignee).
Above/
37 2.00 Pair 6175.00 12350.00 AT Par 12350.00
Below/Par
37
Description:- Supply and Installation of Media converter single mode ethernet to Fiber media converter for
transmission and Reception maximum distance of 15 km as per specification attached.(Inspection by consignee).
Above/
38 1.00 Numbers 1500.00 1500.00 AT Par 1500.00
Below/Par
38 Description:- Supply of Thermo shrink jointing TSF-2 for 50 pair 0.6 mm dia Conductor UG PIJF cable as per
RDSO spec RDSO/SPN/TC/57/2015 revised or latest. Material to be procured from RDSO approved vendor
(Inspection by consignee).
Above/
39 1.00 Numbers 300.00 300.00 AT Par 300.00
Below/Par
39 Description:- Installation of TSF-2 jointing kit for 50 pair 0.6mm dia conductor UG PIJF cable as per RDSO Spec
RDSO/SPN/TC/57/2015 revised or latest Thermoshrink joint kit supplied by railway All other item required for
jointing shall be supplied by contractor. This includes excavation of jointing pit. as directed by the Railway
representative at site.
Above/
40 2.00 Numbers 1230.73 2461.46 AT Par 2461.46
Below/Par
40 Description:- Supply and Fixing of 10 pair Krone module housed in MS Box Powder coated with lock and Key
and termination of cable (10 pair Krone MS Box, Kongu/ Teak wood planks. and all other miscellaneous materials
including Suitable Gl pipe for cable entry, PVC pipe etc required for the work shall be supplied by the contractor).
(inspection by consignee).
Above/
41 3.00 Numbers 1980.00 5940.00 AT Par 5940.00
Below/Par
41 Description:- Supply and Fixing of 20 pair Krone module housed in MS Box Powder coated with lock and Key
and termination of cable (20 pair Krone MS Box, Kongu /Teak wood planks. and all other miscellaneous materials
including Suitable Gl pipe for cable entry, PVC pipe etc required for the work shall be supplied by the contractor).
(inspection by consignee).
Above/
42 2.00 Numbers 2546.25 5092.50 AT Par 5092.50
Below/Par
Description:- Supply and Fixing of 50 pair Krone module housed in MS Box Powder coated with lock and Key
42
and termination of cable (50 pair Krone MS Box, Kongu/ Teak wood planks, and all other miscellaneous materials
including GI pipe of 50mm dia, 3.65mm thickness of suitable length for cable entry, PVC pipe etc required for the
work shall be supplied by the contractor)(inspection by consignee)
Above/
43 1.00 Numbers 89865.00 89865.00 AT Par 89865.00
Below/Par
43 Description:- Supply, Installation & Commissioning 3 KVA ON LINE UPS (Single phase) floor mountable type with
1 hr backup (Min 4800 VAh) time along with suitable AH capacity SMF batteries (EXIDE/AMARAJA or better) with
proper termination of incoming and outgoing supply in suitable MCB rating with suitable stand for batteries as per
railway representative at site . (Make: APC/Numeric/Tata liebert /Microtek or better)(inspection by consignee)
Above/
44 1.00 Numbers 135000.00 135000.00 AT Par 135000.00
Below/Par
44 Description:- Supply, Installation & Commissioning 5 KVA ON LINE UPS (Single phase) floor mountable type with
1 hr backup (Min 8000 VAh) time along with suitable AH capacity SMF batteries (EXIDE/AMARAJA or better) with
proper termination of incoming and outgoing supply in suitable MCB rating with suitable stand for batteries as per
railway representative at site. (Make: APC/Numeric/Tata liebert /Microtek or better).(Inspection by consignee).
Above/
45 40.00 Numbers 165.00 6600.00 AT Par 6600.00
Below/Par
45
Description:- Supply and Installation of 3 Mtrs length CAT6 UTP patch chord (RJ45) factory crimped
(Make:DAX/MOLEX/KRONE/Legrand/BETTER) (inspection by consignee).
Above/
46 60.00 Numbers 95.00 5700.00 AT Par 5700.00
Below/Par
46
Pa g e 8 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Description:- Supply and Installation of 1 Mtr length UTP CAT6 23 AWG factory crimped patch chord (RJ45)
similar to make DAX/MOLEX/KRONE/BETTER or better.(Inspection by consignee).
Above/
47 10.00 Numbers 4800.00 48000.00 AT Par 48000.00
Below/Par
47
Description:- Supply and Termination of 24 port loaded patch panel /jack panel with cable manager and
terminating UTP cable. (Make: DAX/MOLEX/KRONE/BETTER)(Inspection by consignee).
Above/
48 4.00 Numbers 9000.00 36000.00 AT Par 36000.00
Below/Par
48
Description:- Supply and Installation of 4 port Gigabit WI-Fl access router confined to 802.11ax (WI-FI.6)
standard as per specification attached.(Inspection by consignee).
Above/
49 24.00 Metre 550.00 13200.00 AT Par 13200.00
Below/Par
Description:- Supply and Installation of 150mm width x 60mm depth x 1.6mm thick size perforated Hot dipped
49 Galvanized cable tray with suitable cover of 1.6 mm thickness and cover to be closed with suitable clamps as per
IS 2629, 2633, 10478, 4759 including horizontal and vertical reducers, tees, cross members and other
accessories as required and duly suspended from the ceiling with GI suspenders (where support is not available,
same will be provided by the contractor). (Inspection by consignee with third party certificate).
Above/
50 2.00 Numbers 6200.00 12400.00 AT Par 12400.00
Below/Par
50 Description:- Supply and Installation (with camera mounting, clamping, and all accessories) of Fixed Dome type
Full HD 2 MP IP Color Camera as per CCE Specification along with OEM test certificate/FAT certificate/QC
certificate.
Above/
51 15.00 Numbers 7300.00 109500.00 AT Par 109500.00
Below/Par
51 Description:- Supply and Installation (with camera housing, mounting, clamping, PVC protective Junction box,
rain hood and all other accessories) of Fixed Bullet type Full HD 4 MP IP Color Camera as per CCE Specification
along with OEM test certificate/FAT certificate/QC certificate.(Inspection by consignee).
Above/
52 2.00 Numbers 72900.00 145800.00 AT Par 145800.00
Below/Par
Description:- Supply and Installation (with all suitable accessories) Network Video Recorder (NVR) of 16 Channel
52 with 10 TB storage after RAID 5 or better with Storage expansion facility, Dual power supply facilities and
including Video management and Video recording software and 16 Nos. of camera recording license, client
license (if any) and all other required licenses (if any) as per CCE Specification along with OEM test
certificate/FAT certificate/QC certificate.(Inspection by consignee).
Above/
53 2.00 Numbers 9287.25 18574.50 AT Par 18574.50
Below/Par
53
Description:- Supply and Installation of 23 inch Full HD (1920 X 1080) LED display monitor with IPS Panel with
all accessories including Power cable. Make: SAMSUNG/LG/DELL/HP or Similar (Inspection by consignee)
Above/
54 1.00 Numbers 73000.00 73000.00 AT Par 73000.00
Below/Par
Description:- Supply of Maintenance portable terminal with Backpack. (15.6 inch size, Intel i5 processor with
54
11th generation or latest, 8 GB DDR4 RAM, 512 GB SSD, WI-FI 6+, Bluetooth 5.0, Ethernet Port 10/100/1000,
HDMI Port, HD Web Camera, loaded with Licenced Windows OS software, Antivirus software) (HP, DELL or better
make) as per specification enclosed. (inspection by consignee)
Above/
55 1.00 Numbers 108000.00 108000.00 AT Par 108000.00
Below/Par
55 Description:- Supply of LCD projector - short throw-WUXGA resolution or higher, minimum 3600 lumens
brightness, Wireless Support and minimum 10000 hours lamp life, Panasonic or Epson or sony or NEC make with
adjustable ceiling mount kit and suitable length HDMI cable.(inspection by consignee).
Above/
56 1.00 Numbers 21000.00 21000.00 AT Par 21000.00
Below/Par
56
Description:- Supply of 8'x6' size motorized screen wall mounted with remote. Elite or liberty or Draper or Elcor
or insight make.(Inspection by consignee)
Above/
57 1.00 Numbers 62704.00 62704.00 AT Par 62704.00
Below/Par
Description:- Supply, Installation, Wiring, Testing and Commissioning of Digital Central Control Unit for Audio
conferencing system it should have the following features, the central unit for powering, configuring and
57
Controlling connected Chairman, Delegate units, and option to control up to 20 units without any power supply.
The System Should have line output ,Frequency Response 60-14,000Hz (+- 3dB), along with complete
accessories similar to Ahuja make Model no DCS 9300 M (Inspection by consignee).
Pa g e 9 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Above/
58 1.00 Numbers 32529.00 32529.00 AT Par 32529.00
Below/Par
58 Description:- Supply, Installation, Wiring, Testing and Commissioning of Table Top Wired Chairman Unit having
high quality condenser microphone mounted on 18.5" Flexible gooseneck Equipped with ring LED indicator along
with headphone output with volume control along with complete accessories along with capping casing on table
similar to Ahuja Make model no DCS 9100 C. (Inspection by consignee).
Above/
59 12.00 Numbers 29068.00 348816.00 AT Par 348816.00
Below/Par
Description:- Supply, Installation, Wiring, Testing and Commissioning of Table Top wired Delegate Unit having
59
high quality condenser microphone mounted on 18.5" Flexible gooseneck Equipped with ring LED indicator a tong
with headphone output with volume control along with complete accessories along with capping casing on table
similar to Ahuja Make model no DCS 9200 D.(Inspection by consignee).
Above/
60 8.00 Numbers 2635.00 21080.00 AT Par 21080.00
Below/Par
60 Description:- Supply, Installation, Wiring, Testing and Commissioning of 2-Way compact wall mount speaker
having 100V power taps of 30W, 20W, 15W, 10W & 5W. facility along with complete accessories suitable to above
system Ahuja make Model no ASX-312BT (Inspection by Consignee).
Above/
61 1.00 Numbers 17126.00 17126.00 AT Par 17126.00
Below/Par
61
Description:- Supply, Installation, Testing & Commissioning of Audio power amplifier with 250W at 8 ohm/4 ohm
facility along with complete accessories suitable to above system.(Inspection by consignee).
Above/
62 2.00 Numbers 7500.00 15000.00 AT Par 15000.00
Below/Par
62
Description:- Supply of DUAL PA VHF wireless microphones similar to make Ahuja model AWM 520 V2 or latest
(Inspection by consignee).
Above/
63 2.00 Numbers 7400.00 14800.00 AT Par 14800.00
Below/Par
63
Description:- Supply of DUAL PA VHF wireless color and cordless microphones similar to make Ahuja model
AWM-520VHL or latest compatible to the audio conference amplifier. (Inspection by consignee).
Above/
64 6.00 Numbers 9836.00 59016.00 AT Par 59016.00
Below/Par
64
Description:- Supply, Installation, Testing and Commissioning of Counter communication similar to Ahuja make
Model no: CCS 2300 or better.(Inspection by consignee).
Above/
65 600.00 Foot 65.00 39000.00 AT Par 39000.00
Below/Par
65 Description:- Supply cabling (Cabling should be done in PVC encloser) and termination of 2 core 18AWG tinned
copper of 100 feet length speaker cable similar to BELDEN make product no. 8461. (1 coil= 100 feet) (Inspection
by consinee)
Above/
66 1000.00 Metre 94.28 94280.00 AT Par 94280.00
Below/Par
66
Description:- Supply of OFC cable 24 fiber armored as per RDSO specification NO.IRS:TC:55/2006 Rev.1 with
amendment No.3 or latest.(Inspection by RDSO)
Above/
67 1000.00 Metre 418.90 418900.00 AT Par 418900.00
Below/Par
67
Description:- Supply of underground polythene insulated jelly filled armoured 50 pair telephone cable 0.63mm
dia of each copper conductor as per TEC specification. GR/CUG-01/03 AUG 2003 or latest. (Inspection by RITES)
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule A1-List of items of work that are covered under CPWD DSR 2021 rates - for
5057505.00
Chennai Division
Above/
Please see Item Breakup for details. 5057505.00 AT Par 5057505.00
01 Below/Par
Description:- SCHEDULE 'A1'( REINFORCEMENT STEEL WORK)
S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule A2-List of items of work that are covered under CPWD DSR-2020 rates
265568.75
(Horticulture & land Scaping) - for Chennai Division
Above/
Please see Item Breakup for details. 265568.75 AT Par 265568.75
Below/Par
01
Pa g e 10 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
3. ITEM BREAKUP
Schedule Schedule A-List of items of work that are covered under CPWD DSR 2021 rates - for Chennai Division
Construction of New Health Unit at Chennai Egmore in lieu of re-locating the existing heath unit in connection
Item- 01
with Chennai Egmore station development project
S No. Item No Description of Item Unit Qty Rate Amount
2.0 EARTH WORK
Earth work in surface excavation not exceeding 30 cm
in depth but exceeding 1.5 m in width as well as 10 sqm
2.1 on plan including getting out and disposal of excavated
earth upto 50 m and lift upto 1.5 m, as directed by
Engineer-in- Charge:
1 2.1.1 All kinds of soil Sqm 500 107 53500
Earth work in excavation by mechanical means
(Hydraulic excavator)/manual means over areas
(exceeding 30 cm in depth, 1.5 m in width as well as 10
2.6
sqm on plan) including getting out and disposal of
excavated earth lead upto 50 m and lift upto 1.5 m, as
directed by Engineer-in-charge.
2 2.6.1 All kinds of soil cum 790 205.45 162305.5
Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10
2.8 sqm on plan), including dressing of sides and ramming
of bottoms, lift upto 1.5 m, including getting out the
excavated soil and disposal of surplus excavated soil as
directed, within a lead of 50 m.
3 2.8.1 All kinds of soil. cum 150 286.85 43027.5
2.25 Filling available excavated earth (excluding rock) in cum 650 253.95 165067.5
trenches, plinth, sides of foundations etc. in layers not
4 exceeding 20cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift
upto 1.5 m.
Extra for every additional lift of 1.5 m or part thereof in
2.26
excavation / banking excavated or stacked materials.
5 2.26.1 All kinds of soil cum 250 104.5 26125
2.27 Supplying and filling in plinth with sand under floors, cum 190 2161.2 410628
6 including watering, ramming, consolidating and dressing
complete.
Surface dressing of the ground including removing
vegetation and in-equalities not exceeding 15 cm deep
2.28
and disposal of rubbish, lead up to 50 m and lift up to
1.5 m.
7 2.28.1 All kinds of soil Sqm 1500 28.15 42225
2.31 Clearing jungle including uprooting of rank vegetation, Sqm 2800 14.5 40600
grass, brush wood, trees and saplings of girth up to 30
8 cm measured at a height of 1 m above ground level and
removal of rubbish up to a distance of 50 m outside the
periphery of the area cleared.
2.32 Clearing grass and removal of the rubbish up to a Sqm 2800 7.4 20720
9 distance of 50 m outside the periphery of the area
cleared.
Felling trees of the girth (measured at a height of 1 m
above ground level), including cutting of trunks and
2.33 branches, removing the roots and stacking of
serviceable material and disposal of unserviceable
material.
10 2.33.1 Beyond 30 cm girth upto and including 60 cm girth Each 5 439.25 2196.25
11 2.33.2 Beyond 60 cm girth upto and including 120 cm girth Each 3 1957.15 5871.45
Pa g e 11 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
12 2.33.3 Beyond 120 cm girth upto and including 240 cm girth Each 3 9084.05 27252.15
13 2.33.4 Above 240 cm girth Each 1 18198.7 18198.7
Diluting and injecting chemical emulsion for POST-
2.35 CONSTRUCTIONAL anti-termite treatment (excluding
the cost of chemical emulsion) :
Along external wall where the apron is not provided
using chemical emulsion @ 7.5 litres / sqm of the
2.35.1 vertical surface of the substructure to a depth of 300mm
including excavation channel along the wall & rodding
etc. complete:
14 2.35.1.1 With Chlorpyriphos E.C. 20% with 1% concentration Metre 1000 32.3 32300
4.0 CONCRETE WORK
4.1S CEMENT CONCRETE (CAST IN SITU)
Providing and laying in position cement concrete of
4.1 specified grade excluding the cost of centering and
shuttering - All work up to plinth level :
4.1.6 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from cum 65 6670.25 433566.25
15 natural sources: 6 graded stone aggregate 40 mm
nominal size derived from natural sources)
4.5S CEMENT CONCRETE PRECAST
Providing and fixing at or near ground level precast
cement concrete in kerbs, edgings etc. as per approved
4.6 pattern and setting in position with cement mortar 1:3 (1
Cement : 3 coarse sand), including the cost of required
centering, shuttering complete.
4.6.1A 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including cum 30 7902.85 237085.5
manufactured sand derived from Recycled Concrete
16 Aggregate (RCA) upto 25% : 3 graded stone aggregate
20 mm nominal size including Recycled Concrete
Aggregate (RCA) upto 25%))
4.9B Precasting and placing in position 125 mm dia Bollards Each 100 733 73300
600 mm high of required shape including providing M.S.
Pipe Sleeve 50 mm dia 300 mm long in the Bollard and
M.S. Pipes 40 mm dia and 450mm long with
150x150x6mm M.S. plate welded at bottom and
embedded 150mm in cement concrete 1:3:6 (1 Cement
17
: 3 manufactured sand derived from Recycled Concrete
Aggregate (RCA) : 6 graded stone aggregate 20 mm
nominal size (Recycled Aggregate (RA), including
necessary excavation of size 250x250x450mm deep for
the same in bitumen/ concrete pavement at specified
spacing
4.10S DAMP-PROOF COURSE
4.10 Providing and laying damp-proof course 40mm thick Sqm 100 370.85 37085
with cement concrete 1:2:4 (1 cement : 2 coarse sand
18 (zone-III) derived from natural sources: 4 graded stone
aggregate 12.5mm nominal size derived from natural
sources)
4.12 Per bag 3500 57.15 200025
Extra for providing and mixing water proofing material in
of
19 cement concrete work in doses by weight of cement as
cement
per manufacturer's specification.
of 50kg
4.13 Providing & applying a coat of residual petroleum Sqm 100 113.85 11385
bitumen of grade of VG-10 of approved quality using
20 1.7kg per square metre on damp proof course after
cleaning the surface with brushes and finally with apiece
of cloth lightly soaked in kerosene oil.
4.14S MISCELLANEOUS
Pa g e 12 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
4.17 Making plinth protection 50mm thick of cement concrete Sqm 95 681.65 64756.75
1:3:6 (1 cement : 3 coarse sand(Zone-III) derived from
natural sources : 6 graded stone aggregate 20 mm
nominal size derived from natural sources) over 75mm
21
thick bed of dry brick ballast 40 mm nominal size, well
rammed and consolidated and grouted with fine sand,
including necessary excavation, levelling & dressing &
finishing the top smooth.
Providing and laying in position ready mixed or site
batched design mix cement concrete for plain cement
concrete work; using coarse aggregate and fine
aggregate derived from natural sources, Portland
Pozzolana/Ordinary Portland /Portland Slag cement,
admixtures in recommended proportions as per IS:
9103 to accelerate / retard setting of concrete, to
im prove durability and workability without impairing
strength; including pumping of concrete to site of laying,
4.20
curing, carriage for all leads; but excluding the cost of
centering, shuttering and finishing as per direction of
the engineer-in-charge; for the following grades of
concrete. Note: Extra cement up to 10% of the minimum
specified cement content in design mix shall be payable
separately. In case the cement content in design mix is
more than 110% of the minimum specified cement
content, the contractor shall have discretion to either re-
design the mix or bear the cost of extra cement.
4.20.1 All works upto plinth level :
4.20.1.1 Concrete of M10 grade with minimum cement content cum 20 8033.2 160664
22
of 220 kg /cum
Providing and laying in position ready mixed or site
batched design mix cement concrete for plain cement
concrete work; u s i n g coarse aggregate a n d fine
aggregate derived from natural sources and using
recycled concrete aggregate (RCA) as coarse
aggregate and fine aggregate within the permissible
u t i l i z a t i o n , P o r t l a n d Pozzolana / Ordinary
Portland/Portland Slag cement, admixtures in
recommended proportions as per IS: 9103 to accelerate
/ retard setting of concrete to improve durability and
4.20A wo r k a b ilit y without impairing strength; including
pumping of concrete to site of laying, curing, carriage
for all leads; but excluding the cost of centering,
shuttering and finishing as per direction of the engineer-
in-charge; for the following grades of concrete. Note:
Extra cement up to 10% of the minimum specified
cement content in design mix shall be payable
separately. In case the cement content in design mix is
more than 110% of the minimum specified cement
content, the contractor shall have discretion to either re-
design the mix or bear the cost of extra cement.
4.20A.1 All works upto plinth level
4.20A.1.1 Concrete of M10 grade with minimum cement content cum 150 7102.95 1065442.5
of 220 kg /cum. (Note: The permissible utilization of
23
Recycled Concrete Aggregate (RCA) as coarse
aggregate and fine aggregate is 100% each).
4.20A.2 All works above plinth and upto floor V level
4.20A.2.1 Concrete of M10 grade with minimum cement content cum 75 8725.35 654401.25
of 220 kg /cum. (Note: The permissible utilization of
24
Recycled Concrete Aggregate (RCA) as coarse
aggregate and fine aggregate is 100% each).
5.0 REINFORCED CEMENT CONCRETE
5.9S FORM WORK
Centering and shuttering including strutting, propping
5.9
etc. and removal of form for
Pa g e 13 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
5.9.1 Foundations, footings, bases of columns, etc. for mass Sqm 364 307.95 112093.8
25
concrete
5.9.2 Walls (any thickness) including attached pilasters, Sqm 50 669.55 33477.5
26
butteresses, plinth and string courses etc.
5.9.3 Suspended floors, roofs, landings, balconies and Sqm 1150 766.55 881532.5
27
access platform
5.9.5 Lintels, beams, plinth beams, girders, bressumers and Sqm 675 608.35 410636.25
28
cantilevers
29 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 270 804.25 217147.5
30 5.9.7 Stairs, (excluding landings) except spiral-staircases Sqm 250 657.75 164437.5
5.9.13 Vertical and horizontal fins individually or forming box Sqm 50 1100.4 55020
31
louvers band, facias and eaves boards
5.9.16 Edges of slabs and breaks in floors and walls
32 5.9.16.1 Under 20 cm wide Metre 90 181.9 16371
33 5.9.16.2 Above 20 cm wide Sqm 30 772.1 23163
34 5.9.19 Weather shade, Chajjas, corbels etc., including edges Sqm 30 814.95 24448.5
Extra for additional height in centering, shuttering where
ever required with adequate bracing, propping etc.,
5.11 including cost of de-shuttering and decentering at all
levels, over a height of 3.5 m, for every additional height
of 1 metre or part thereof (Plan area to be measured).
5.11.1 Suspended floors, roofs, landing, beams and balconies Sqm 500 319.25 159625
35
(Plan area to be measured)
5.12S PRE-CAST RCC
Providing precast cement concrete Jali 1:2:4 (1 cement
: 2 coarse sand(zone-III) : 4 graded stone aggregate
6mm nominal size ), reinforced with 1.6 mm dia mild
5.18 steel wire, including centering and shuttering,
roughening cleaning, fixing and finishing in cement
mortar 1:3 (1 cement: 3 fine sand) etc. complete,
excluding plastering of the jambs, sills and soffits.
36 5.18.1 50 mm thick Sqm 50 1580.9 79045
5.33S DESIGN MIX CONCRETE
Providing and laying in position ready mixed or site
batched design mix cement concrete for reinforced
cement concrete work; using coarse aggregate and fine
aggregate derived from natural sources, Portland
Pozzolana / Ordinary Portland /Portland Slag cement,
admixtures in recommended proportions as per IS:
9103 to accelerate / retard setting of concrete, to
improve durability and workability without impairing
strength; including pumping of concrete to site of laying,
5.33 curing, carriage for all leads; but excluding the cost of
centering, shuttering, finishing and reinforcement as per
direction of the engineer-in-charge; for the following
grades of concrete. Note: Extra cement up to 10% of
the minimum specified cement content in design mix
shall be payable separately. In case the cement content
in design mix is more than 1.10 times of the specified
minimum cement content, the contractor shall have
discretion to either re-design the mix or bear the cost of
extra cement.
5.33.1 All works upto plinth level
5.33.1.1 Concrete of M25 grade with minimum cement content cum 30 8683.8 260514
37
of 330 kg /cum
5.33.2 All works above plinth level upto floor V level
5.33.2.1 Concrete of M25 grade with minimum cement content cum 15 10306.2 154593
38
of 330 kg /cum
Pa g e 14 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Pa g e 15 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
8.31 Providing and fixing Ist quality ceramic glazed wall tiles Sqm 200 1063.45 212690
conforming to IS: 15622 (thickness to be specified by
the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size
as approved by Engineer-in-Charge, in skirting, risers of
47
steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3kg per sqm, including pointing
in white cement mixed with pigment of matching shade
complete.
9.0 WOOD AND P.V.C. WORK
9.1S FRAMES AND TRUSSES
Providing wood work in frames of doors, windows,
clerestory windows and other frames, wrought framed
9.1 and fixed in position with hold fast lugs or with dash
fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately).
48 9.1.1 Second class teak wood cum 2 131576.95 263153.9
Providing and fixing 25 mm thick shutters for cup board
9.16
etc. :
Providing and fixing ISI marked flush door shutters
conforming to IS : 2202 (Part I) decorative type, core of
block board construction with frame of 1st class hard
9.20
wood and well matched teak 3 ply veneering with
vertical grains or cross bands and face veneers on both
faces of shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt Sqm 60 3086.1 185166
49
hinges with necessary screws
Providing and fixing ISI marked flush door shutters
conforming to IS : 2202 (Part I) non-decorative type,
core of block board construction with frame of 1st class
9.21
hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face
veneers on both faces of shutters:
9.21.2 30 mm thick including ISI marked Stainless Steel butt Sqm 80 1881.95 150556
50
hinges with necessary screws
Extra for Providing and fixing flush doors with decorative
9.22 veneering instead of non decorative ISI marked flush
door shutters conforming to IS: 2202 (Part I)
51 9.22.1 On one side only Sqm 40 408.05 16322
9.23 Extra for providing lipping with 2nd class teak wood Sqm 40 401.4 16056
battens 25 mm minimum depth on all edges of flush
52
door shutters (over all area of door shutter to be
measured).
Extra for providing vision panel not exceeding 0.1 sqm
9.24 in all type of flush doors (cost of glass excluded) (overall
area of door shutter to be measured):
53 9.24.1 Rectangular or square Sqm 15 173.95 2609.25
9.105S GYPSUM BOARD PARTITIONS
9.121 Providing and fixing Fiber Glass Reinforced plastic Metre 60 702.6 42156
(FRP) Door Frames of cross-section 90 mm x 45 mm
having single rebate of 32 mm x 15 mm to receive
shutter of 30 mm thickness. The laminate shall be
moulded with fire resistant grade unsaturated polyester
54
resin and chopped mat. Door frame laminate shall be
2mm thick and shall be filled with suitable wooden block
in all the three legs. The frame shall be covered with
fiber glass from all sides. M.S. stay shall be provided at
the bottom to steady the frame.
9.122 Providing and fixing to existing door frames.
Pa g e 16 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush Sqm 20 3963.7 79274
door shutter in different plain and wood finish made with
fire retardant grade unsaturated polyester resin,
moulded to 3 mm thick FRP laminate all around, with
suitable wooden blocks inside at required places for
55 fixing of fittings and polyurethane foam
(PUF)/Polystyrene foam to be used as filler material
throughout the hollow panel, casted monolithically with
testing parameters of F.R.P. laminate conforming to
table - 3 of IS: 14856, complete as per direction of
Engineer-in-charge.
Providing and fixing wire gauge shutters using stainless
steel grade 304 wire gauge with wire of dia 0.5 mm and
9.134 average width of aperture 1.4 mm in both directions for
doors, windows and clerestory windows with necessary
screws :
Providing and fixing factory made uPVC white colour
fixed glazed windows/ventilators comprising of uPVC
multi-chambered frame and mullion (where ever
required) extruded profiles duly reinforced with 1.60 +/-
0.2 mm thick galvanized mild steel section made from
roll forming process of required length (shape & size
according to uPVC profile), , uPVC extruded glazing
beads of appropriate dimension, EPDM gasket, G.I
fasteners 100 x 8 mm size for fixing frame to finished
wall, plastic packers, plastic caps and necessary
stainless steel screws etc. Profile of frame shall be
9.147B mitred cut and fusion welded at all corners, mullion (if
required) shall be also fusion welded including drilling of
holes for fixing hardware's and drainage of water etc.
After fixing frame the gap between frame and adjacent
finished wall shall be filled with weather proof silicon
sealant over backer rod of required size and of
approved quality, all complete as per approved drawing
& direction of Engineer-in-Charge. (Single / double
glass panes and silicon sealant shall be paid
separately). Variation in profile dimension in higher side
shall be accepted but no extra payment on this account
shall be made.
9.147B.1 Fixed window / ventilator made of (small series) frame Sqm 180 7249.9 1304982
47 x 50 mm & mullion 47 x 68 mm both having wall
56
thickness of 1.9 +/- 0.2 mm and single glazing bead of
appropriate dimension. (Area upto 0.75 sqm.)
Pa g e 17 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Pa g e 18 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Pa g e 19 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Pa g e 2 0 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
16.27 Surface dressing on old surface with hot bitumen of Sqm 650 137.85 89602.5
grade VG - 10 of approved quality using 1.95 kg of
bitumen per sqm with 1.50 cum of stone chippings 11.2
87
mm nominal size per 100 sqm of road surface, including
consolidation with road roller of 6 to 8 tonne capacity,
etc. complete.
Surface dressing one coat on new surface with bitumen
of specified grade at a rate of 1.95 kg/sqm of surface
area with 1.5 cum of stone chippings 13.2 mm nominal
16.28
size per 100 sqm of road surface, including
consolidation with road roller of 6 to 8 tonne capacity ,
etc. complete :
16.28.1 Using bitumen emulsion (minimum 50% bitumen Sqm 650 169.8 110370
88
content- RS grade conforming to IS : 8887)
Providing and applying tack coat using bitumen
emulsion conforming to IS:8887, using emulsion
16.31
pressure distributer including preparing the surface &
cleaning with mechanical broom.
16.31.2 With medium setting bitumen emulsion
89 16.31.2.1 On W.B.M / W.M.M. @ 0.4kg/sqm Sqm 650 16.35 10627.5
90 16.31.2.2 On bituminous surface @ 0.25kg/sqm Sqm 650 10.85 7052.5
16.42S CONCRETE PAVEMENTS
Providing and laying design mix cement concrete of M-
30 grade, in roads/ taxi tracks/ runways, using cement
content as per design mix, using coarse sand and
graded stone aggregate of 40 mm nominal size in
appropriate proportions as per approved & specified
design criteria, providing dowel bars with sleeve/ tie
bars wherever required, laying at site, spreading and
compacting mechanically by using needle and surface
16.43 vibrators, levelling to required slope/ camber, finishing
with required texture, including steel form work with
sturdy M.S. channel sections, curing, making provision
for contraction/ expansion, construction & longitudinal
joints (10 mm wide x 50 mm deep) by groove cutting
machine, providing and filling joints with approved joint
filler and sealants, complete all as per direction of
Engineer-in-charge (Item of joint fillers, sealants, dowel
bars with sleeve/ tie bars to be paid separately).
16.43.2 Cement concrete manufactured in automatic batching cum 10 10006.65 100066.5
91 plant (RMC plant) i/c transportation to site in transit
mixer
16.47S PAINTING AREA/RUNWAY MARKING
Painting road surface marking with adequate nos of
coats to give uniform finish with ready mixed road
marking paint conforming to IS : 164, on bituminous
16.48
surface in white/yellow shade, including cleaning the
surface of all dirt, scales, oil, grease and foreign
material etc. complete.
92 16.48.1 New work (Two or more coats) Sqm 20 239.95 4799
16.49S MISCELLANEOUS
Pa g e 2 1 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
16.50 Providing and fixing Glow studs of size 100x20 mm Each 50 175.5 8775
made of heavy duty body shall be moulded ASA (Acrylic
styrene Acryloretrite ) or HIP (High impact polystyrene)
or ABS having electronically welded micro- prismatic
lens with abrasion resistant coating as approved by
Engineer in charge. The glow stud shall support a load
of 13635 kg tested in accordance with ASTM D4280.
The slope of retro- reflective surface shall be 35 (+/-5)
93 degress to base .The reflective panels on both sides
with at least 12 cm of reflective area up each side. The
luminance intensity should be as per the specification
and shall be tested as described in ASTM I: 809 as
recommended in BS: 873 part 4 : 1973. The studs shall
be fixed to the Road surface using the adhesive
conforming to IS, as per procedure recommended by
the manufacturer complete and as per direction of
Engineer-in-charge.
Manufacturing, supplying and fixing retro reflective sign
boards made up of 2 mm thick aluminium sheet, face to
be fully covered with high intensity encapsulated type
heat activated retro reflective sheeting conforming to
type - IV of ASTM-D 4956-01 in blue and silver white or
other colour combination including subject matter,
message (bi-lingual), symbols and borders etc. as per
IRC ; 67:2001, pasted on substrate by an adhesive
backing which shall be activated by applying heat and
pressure conforming to class -2 of ASTM-D-4956-01
and fixing the same with suitable sized aluminium alloy
rivets @ 20 cm c/c to back support frame of M.S. angle
iron of size 25x25x3 mm along with theft resistant
measures, mounted and fixed with 2 Nos. M.S. angles
16.59
of size 35x35x5 mm to a vertical post made up to M.S.
Tee section ISMT 50x50x6 mm welded with base plate
of size 100x100x5 mm at the bottom end and including
making holes in pipes, angles flats, providing & fixing
M.S. message plate of required size, steel work to be
painted with two or more coats of synthetic enamel
paint of required shade and of approved brand &
manufacture over priming coat of zinc chromate yellow
primer (vertical MS-Tee support to be painted in black
and white colours).Backside of aluminium sheet to be
painted with two or more coats of epoxy paint over and
including appropriate priming coat including all leads
and lifts etc. complete as per drawing , specification and
direction of Engineer-in-charge.
16.59.1 Mandatory/ Regulatory sign boards of 900 mm diametre Each 5 5745.95 28729.75
94
with support length of 3750 mm
16.59.2 Cautionary /warning sign boards of equilateral triangular Each 5 4209.2 21046
95 shape having each side of 900 mm with support length
of 3650 mm
Pa g e 2 2 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Pa g e 2 3 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
16.81 Providing and erecting 2.00 metre high temporary Metre 50 2827.4 141370
barricading at site; each panel of size 2.50mx2.00m
made of 40x40x6mm angle iron or 50x50x3mm hollow
MS tube posts/horizontal members/bracings covered
with 1.63mm thick MS sheet. The sheet shall be fixed
with 30x5mm MS flat by suitable welding/riveting. The
panels shall be made so that gap of 50cm above the
ground is available making overall height as 2.5m. MS
channel ISLC 75 @ 5.70 kg/m, 50cm long shall be
provided at the bottom having oval shaped holes of size
50x25mm at both ends with 50cm long MS angle
40x40x6mm bracing. Suitable arrangement shall be
made to fix the barricading to avoid from overturning by
providing 250mm long expansion fasteners at both
100
ends. The work shall be executed as per
drawing/direction of Engineer-in-Charge which includes
writing and painting, arrangement for traffic diversion
such as traffic signals during construction at site for day
and night, glow lamps, reflective signs, marking, flags,
caution tape as directed by the Engineer-in-Charge.
The barricading provided shall be retained in position at
site continuously i/c shifting of barricading from one
location to another location as many times as required
during the execution of the entire work till its completion.
Rate include its maintenance for damages, painting, all
incidentals, labour materials, equipments and works
required to execute the job. The barricading shall not be
removed without prior approval of Engineer-in-Charge.
16.82 Taking out existing kerb stones of all types from Metre 150 32.4 4860
footpath/ central verge, including removal of mortar etc.,
disposal of unserviceable material to the dumping
101
ground, for which payment shall be made separately
and stacking of serviceable material within 50 metre
lead as per direction of Engineer-in-Charge.
Providing and laying gang saw cut 30 mm thick, mirror
polished pre moulded and pre polished machine cut
granite stone of required size and shape of approved
shade, colour and texture in footpath, flooring in road
16.87 side plazas and similar locations, laid over 20mm thick
base of cement mortar 1:4 (1 cement : 4 coarse sand)
including grouting the joints with white cement mixed
with matching pigment, epoxy touch ups etc. complete
as per direction of Engineer-in-Charge.
16.87.2 With granite stone of all colour except black, cherry/ruby Sqm 20 4537.25 90745
102
red of area less than 0.50 sqm.
17.0 SANITARY INSTALLATIONS
Providing and fixing water closet squatting pan (Indian
type W.C. pan ) with 100 mm sand cast Iron P or S trap,
10 litre low level white P.V.C. flushing cistern, including
17.1 flush pipe, with manually controlled device (handle
lever) conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good
the walls and floors wherever required:
17.1.1 White Vitreous china Orissa pattern W.C. pan of size Each 5 5781.35 28906.75
103
580x440 mm with integral type foot rests
Providing and fixing white vitreous china flat back half
stall urinal of size 580x380x350 mm with white PVC
automatic flushing cistern, with fittings, standard size
C.P. brass flush pipe, spreaders with unions and clamps
17.5
(all in C.P. brass) with waste fitting as per IS : 2556, C.I.
trap with outlet grating and other couplings in C.P.
brass, including painting of fittings and cutting and
making good the walls and floors wherever required :
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic Each 14 10128.3 141796.2
104
flushing cistern
Pa g e 2 4 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Pa g e 2 5 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Pa g e 2 6 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Pa g e 2 7 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Pa g e 2 8 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Pa g e 2 9 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
21.16.3 Polyester powder coated minimum thickness 50 micron Each 50 92.25 4612.5
152
aluminium
21.17 Providing and fixing anodised aluminium grill (anodised Kg 500 560.85 280425
transparent or dyed to required shade according to IS:
1868 with minimum anodic coating of grade AC 15) of
approved design/pattern, with approved standard
section and fixed to the existing window frame with C.P.
brass/ stainless steel screws @ 200 mm centre to
153
centre, including cutting the grill to proper opening size
for fixing and operation of handles and fixing approved
anodised aluminium standard section around the
opening, all complete as per requirement and direction
of Engineer-in-charge. (Only weight of grill to be
measured for payment).
21.18 Providing and fixing 12 mm thick frameless toughened Sqm 100 4540.7 454070
glass door shutter of approved brand and manufacture,
including providing and fixing top & bottom pivot &
double acting hydraulic floor spring type fixing
154
arrangement and making necessary holes etc. for fixing
required door fittings, all complete as per direction of
Engineer-in-charge (Door handle, lock and stopper
etc.to be paid separately).
Filling the gap in between aluminium/ stone/ wood
frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/
Gypsum work by providing weather/structural non sag
21.19 elastomeric PU sealant over backer rod of approved
quality as per architectural drawings and direction of
Engineer-in-charge complete, complying to ASTM
C920, DIN 18540-F & ISO 11600
155 21.19.1 Upto 5 mm depth and 5 mm width Metre 20 130.2 2604
156 21.19.2 Upto 10 mm depth and 10 mm width Metre 40 177 7080
157 21.19.3 Upto 20 mm depth and 20 mm width Metre 40 320.25 12810
22.0 WATER PROOFING
22.6 Providing and laying water proofing treatment on roofs Sqm 300 585.55 175665
of slabs by applying cement slurry mixed with water
proofing cement compound consisting of applying: (a)
after surface preparation, first layer of slurry of cement
@ 0.488 kg/sqm mixed with water proofing cement
compound @ 0.253 kg/sqm. (b) laying second layer of
Fibre glass cloth when the first layer is still green.
Overlaps of joints of fibre cloth should not be less than
10 cm. (c) third layer of 1.5 mm thickness consisting of
158 slurry of cement @ 1.289 kg/sqm mixed with water
proofing cement compound @ 0.670 kg/sqm and
coarse sand @ 1.289 kg/sqm. This will be allowed to air
cure for 4 hours followed by water curing for 48 hours.
The entire treatment will be taken upto 30 cm on
parapet wall and tucked into groove in parapet all
around. (d) fourth and final layer of brick tiling with
cement mortar (which will be paid for separately. For
the purpose of measurement the entire treated surface
will be measured.
Total 27755244.25
Schedule Schedule B-S & T SOR items
Schedule for S & T arrangements in connection with Proposed construction of New Railway health unit at
Item- 01
Chennai Egmore (MS)
S No. Item No Description of Item Unit Qty Rate Amount
Pa g e 30 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
1 011050 Excavation of trench along route of existing cable duct, Metre 100.00 116.70 11670.00
opening the slabs to accommodate additional cable
laying, REPOSITIONING the slabs removed after the
cables are laid and PLASTERING with cement mortar,
and refilling the trench by ramming and consolidating it
as per the instructions of Railway Representatives at
site. (Laying of cables is not included in this schedule.)
[Cement, river sand and all other miscellaneous
materials required for the work shall be supplied by the
Contractor].
2 011100 Provision of GI pipes (50/100mm dia) for cable laying in Metre 100.00 168.08 16808.00
hard rocky area with off sets at both ends duly
supported by concrete blocks of size 300mm x 300 mm
x 300 mm at an interval of 2m. The ends of the pipes
shall be closed with brick masonry work so that no cable
is exposed, The work shall be carried out as per the
instructions of Railway representative at site. Supply of
GI pipes with couplings and laying of cables is not
included in this schedule.[Stone jelly of size 20/25mm,
bricks, sand, cement and all other miscellaneous
materials required for the work shall be supplied by the
Contractor].
3 011110 Laying of signaling/power/telecommunication cables as Metre 1000.00 9.83 9830.00
per cable plan in cable trenches, masonry ducts, RCC
Pipes, DWC pipes, GI Pipes etc.(Supply of cables is not
included in this schedule).
4 011130 Placing of one row of country bricks of size Metre 700.00 48.76 34132.00
approximately 220mm x 100mm x 60mm breadth wise
horizontally above the cables in 0.3m width trench.
[Country bricks of size 220mm x 100mm x 60 mm
(approximately) shall be supplied by the Contractor].
5 011180 Supply of RCC cable markers as per drawing Numbers 30.00 166.29 4988.70
No.CSTE/CN/OFC/1. The lettering on the cable marker
shall be "SIG" / "TELE" / "OFC" as per the instructions
of Railway representative at site.
6 011190 Digging of pit to a depth of 800mm of size Numbers 30.00 121.43 3642.90
300mmX300mm, casting of concrete foundation of size
300mmX300mmX300mm and Placing of RCC cable
markers on top of the foundation and refilling the pit and
consolidating it by ramming. The cable markers shall be
provided at an interval of 20 Mtrs. within station limits
and 50 Mtrs. outside station limits throughout the cable
route, diversions and also at every track/road/crossing.
7 011230 Supply of GI pipes - 100mm dia-4.5mm thick as Metre 100.00 838.80 83880.00
specified in Vol.II of the Tender document
Total 164951.60
Schedule Schedule A1-List of items of work that are covered under CPWD DSR 2021 rates - for Chennai Division
Item- 01 SCHEDULE 'A1'( REINFORCEMENT STEEL WORK)
S No. Item No Description of Item Unit Qty Rate Amount
5.0 REINFORCED CEMENT CONCRETE
5.22S STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including
5.22 straightening, cutting, bending, placing in position and
binding all complete upto plinth level.
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D Kg 25620 89.65 2296833
1
or more.
Steel reinforcement for R.C.C. work including
5.22A straightening, cutting, bending, placing in position and
binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D Kg 21080 89.65 1889822
2
or more.
10.0 STEEL WORK
Pa g e 31 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
10.2 Structural steel work riveted, bolted or welded in built up Kg 2000 111.95 223900
sections, trusses and framed work, including cutting,
3
hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
Providing and fixing hand rail of approved size by
welding etc. to steel ladder railing, balcony railing,
10.26
staircase railing and similar works, including applying
priming coat of approved steel primer.
4 10.26.1 M.S. tube Kg 1000 157.15 157150
10.28 Providing and fixing stainless steel ( Grade 304) railing Kg 800 612.25 489800
made of Hollow tubes, channels, plates etc., including
welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c
fixing the railing with necessary accessories & stainless
5 steel dash fasteners , stainless steel bolts etc., of
required size, on the top of the floor or the side of waist
slab with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose only weight
of stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts,
fasteners etc.).
Total 5057505.00
Schedule A2-List of items of work that are covered under CPWD DSR-2020 rates (Horticulture & land Scaping) -
Schedule
for Chennai Division
Item- 01 SCHEDULE 'A2'(Horticulture and land scaping)
S No. Item No Description of Item Unit Qty Rate Amount
2.0 HORTICUTURE AND LANDSCAPING
2.2 Supplying and stacking of good earth at site including cum 125 515.6 64450
royalty and carriage upto 5 km lead complete (earth
1
measured in stacks will be reduced by 20% for
payment).
Supplying a n d stacking a t s i t e d u m p m a n u r e from
approved source, including carriage upto 5 km lead
2.4
complete (manure measured in stacks will be reduced
by 8% for payment) :
2 2.4.3 Screened through sieve of I.S. designation 4.75 mm cum 125 319.9 39987.5
2.9 Mixing earth and sludge or manure in the required cum 125 36.55 4568.75
3
proportion specified or directed by the Officer-in-charge
Digging holes in ordinary soil and refilling the same with
the excavated earth mixed with manure or sludge in the
ratio of 2:1 by volume (2 parts of stacked volume of
earth after reduction by 20% : 1 part of stacked volume
2.14
of manure after reduction by 8%) flooding with water,
dressing including removal of rubbish and surplus earth,
if any, with all leads and lifts (cost of manure, sludge or
extra good earth if needed to be paid for separately)
4 2.14.4 Holes 45 cm dia, and 45 cm deep. Each 100 18.7 1870
Edging with bricks laid dry length wise, including
required excavation, refilling, consolidating with hand
2.19
packing and spreading surplus earth neatly within a
lead of 50 m :
2.19.1 Common burnt clay F.P.S (non modular) bricks of Class Metre 250 396.9 99225
5
designation 7.5
Pa g e 32 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
4. ELIGIBILITY CONDITIONS
Pa g e 33 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
For works costing more than Rs.50 lakhs - The tenderer must have minimum average
annual contractual turnover of V/N or 'V' which ever is less; where V= Advertised value
of the tender in crores of Rupees N= Number of years prescribed for completion of work
for which bids have been invited. The average annual contractual turnover shall be
calculated as an average of "total contractual payments" in the previous three financial
Allowed
1 years, as per the audited balance sheet. However, in case balance sheet of the previous No No
(Mandatory)
year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year
shall be considered for calculating average annual contractual turnover. The tenderers
shall submit requisite information as per Annexure-VIB, along with copies of Audited
Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered
Accountant duly supported by Audited Balance Sheet.
Bidders shall confirm and certify on the behalf of the tenderer including its constituents as under:
S.No. Description
1 I/we the tenderer (s) am/are signing this document after carefully reading the contents.
2 I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have
verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the
3
tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment
of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and
4
attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and
5
same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully
6
responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt.
7 of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the
partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for
evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract
8
including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our
offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the
award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and
9
Performance guarantee and may also lead to any other action provided in the contract including banning of business for a
period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India
and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent
10
Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of
valid registration by the competent authority is enclosed)
Pa g e 34 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
S.No. Description
Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. Please
submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the
1 certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to
summary rejection of your offer.
( Click here to download the Format of Self Certification)
5. COMPLIANCE
Commercial-Compliance
General Instructions
Pa g e 35 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
Special Conditions
Technical-Compliances
Undertakings
Pa g e 36 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5
CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY
TENDER DOCUMENT
Tender No: MAS03OF24011B Closing Date/Time: 23/02/2024 11:00
This tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by
Department of Induswww Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no.
2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017 and amendments/ revisions thereof.
As a Tender Inviting Authority, the undersigned has ensured that the issue of this tender does not violate provisions of
GFR regarding procurement through GeM.
Designation : Sr.DENCo-ord.MAS
Pa g e 37 o f 37 Ru n Da te/Time: 0 2 /0 2 /2 0 2 4 19 :0 1:0 5