Professional Documents
Culture Documents
EMT, RGS, Steel Flexible Conduits, Fittings & Boxes ITCC Rev 0
EMT, RGS, Steel Flexible Conduits, Fittings & Boxes ITCC Rev 0
Company Profile
Organizational Chart
General Scope of Work
Commercial License / Register
Industrial / Trade License
GOSI (General Organization for Social
Insurance) Certificate
Saudization Certificate
ZAKAT & Tax Certificate
National Address
ISO Certificate
Authorization letter by the Manufacturer /
Supplier
Proof of Certification/Listings, as specified
(eg. UL, ISO, FM etc.)
QHSE Policy Statement
Previous Project Reference
Previous Project Approvals
Product Catalogue
Company Profile
SESCO_Profile/FEB2022/Rev.03
Comprehensive Corporate
Identity Guidelines
ResponsibleExperts. ReliableSolutions.
2. Horizontal Logo
CONTENTS
6 7
Saudi ElEctric Supply company limitEd
8 9
Saudi ElEctric Supply company limitEd
10 11
Saudi ElEctric Supply company limitEd
12 13
Saudi ElEctric Supply company limitEd
14 15
Saudi ElEctric Supply company limitEd
16 17
Saudi ElEctric Supply company limitEd
18 19
Saudi ElEctric Supply company limitEd
20 21
Saudi ElEctric Supply company limitEd
22
Saudi ElEctric Supply company limitEd
Organizational Chart
General Scope of Work
Comprehensive Corporate
Identity Guidelines
2. Horizontal Logo
CONTENTS
4 5
6 7
8 9
10 11
12 13
14 15
Commercial License /
Register
رﻣﺰك اﻟﺘﺠﺎري QR Code
ﻣﻦ ﺧﻼﻟﻪ ﻳﻤﻜﻨﻚ اﻟﺘﺤﻘﻖ اﻟﻤﺒﺎﺷﺮ ﻣﻦ اﻟﻌﻠﻮﻣﺎت:
MCgovSA
www.mc.gov.sa
̀˹˹˹˹˻˼˽̂˽
˻˹˾˺˹˹˻˼̂˹
˰ϫ˺˼̂˿˹˾˻˹
ΓΩϭΩΣϣϟΔϳΎΑέϬϛϟΩϭϣϠϟΔϳΩϭόγϟΔϛέηϟ
ϯΩϭό˰˰˰˰γ ΓΩϭΩΣϣΔϳϟϭγϣΕΫ
˰ϫ˺˽˽˿˹˾˻˼ ˰ϫ˺˽˻˺˹˾˻˹ Δϧγ˻˾
νΎϳέϟωέΎηΔϳΑϭϧΟϟέΑΧϟϲΣέΑΧϟ
˼˻̂́ ˼˺̂˾˻ ́́˻̂˾˽˿
ϱέΎΟΗϟίϣέϟγϣ˯ΎΟέϟΔρηϧϷΕΎϧΎϳΑϰϠϋωϼρϼϟ
ϱΩϭόγ்˼က˾˹˹က˹˹˹
έΑϳϣϟϰγϳϋΩόγௌΩΑϋ
ΔϛέηϟΩϘϋϪϳϠϋιϧΎϣΏγΣ
έΑΧϟ έΑΧϟ
˰ϫ˺˽˽˼˹́˹˾ ˺˹˾˼˼́̀̂˻ ˰ϫ˺˽˽˿˹˽˻́
àæúƵƱǟǛÞƥǫƟơƣƷǦǙǛÞæÞǧǟǜǛƥǪæǧǍƻǛÞƥǘƷƾǛÞ
đĊĊĊĊČčĎēĎ
ČĊďċĊĊČčēĊ
ČĐĊ
ċċĐēĐĎċēČ
čĊĊĎēďĒĎĎĎ
ØÞƷƭǰÞƦƱƧ
ĎČĊ
ƥǁƳèǠǞƷƫǘÚƵƭǧǪ
Industrial / Trade License
Membership Certificate - ﺷ ﺎﺩﺓ ﺍﻻﺷ ﺍﻙ
ﺷﻬﺎﺩﺓ
ﺍﻟﺨﺒﺮ
ﺍﻟﺴﻌﻮﺩﻳﺔ
٥١٠٧٨٩٢٩٦ ﺭﻗﻢ ﺍﻹﺷﺘﺮﺍﻙ :
ﻣﺼﺪﺭﻩ : ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ٢٠٥١٠٠٢٣٩٠ :
ﻛﺘﺎﺑﺔ ﺭﻗﻤﺎ
ﺛﻤﺎﻧﻴﺔ ﻭ ﺛﻼﺛﻮﻥ ﻣﺸﺘﺮﻛﺎ ٣٨ ﻋﺪﺩ ﺍﻟﻤﺸﺘﺮﻛﻴﻦ ﺍﻟﺴﻌﻮﺩﻳﻴﻦ
ﺧﻤﺴﻮﻥ ﻣﺸﺘﺮﻛﺎ ٥٠ ﻋﺪﺩ ﺍﻟﻤﺸﺘﺮﻛﻴﻦ ﻏﻴﺮ ﺍﻟﺴﻌﻮﺩﻳﻴﻦ
ﺛﻤﺎﻧﻴﺔ ﻭ ﺛﻤﺎﻧﻮﻥ ﻣﺸﺘﺮﻛﺎ ٨٨ ﺍﻟﻤﺠﻤﻮﻉ
ﺗﺸﻬﺪ ﺍﻟﻤﺆﺳﺴﺔ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺘﺄﻣﻴﻨﺎﺕ ﺍﻹﺟﺘﻤﺎﻋﻴﺔ ﺑﺄﻥ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﻤﺬﻛﻮﺭﺓ ﺃﻋﻼﻩ ﻗﺪ ﺃﻭﻓﺖ ﺑﺈﻟﺘﺰﺍﻣﺎﺗﻬﺎ ﺗﺠﺎﻩ ﺍﻟﻤﺆﺳﺴﺔ
ﻭﻓﻖ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻤﻘﺪﻣﺔ ﻣﻨﻬﺎ ﺣﺘﻰ ﺗﺎﺭﻳﺦ ﺇﺻﺪﺍﺭ ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ،ﻭﺍﻟﺘﻲ ﺗﻢ ﻣﻨﺤﻬﺎ ﻟﺘﻘﺪﻳﻤﻬﺎ ﻷﻳﺔ ﺟﻬﺔ ﺗﻄﻠﺒﻬﺎ ،ﻭﻫﻲ
ﺻﺎﻟﺤﺔ ﻟﺠﻤﻴﻊ ﺍﻷﻏﺮﺍﺽ ﺍﻟﺘﻲ ﻧﺺ ﻋﻠﻴﻬﺎ ﻧﻈﺎﻡ ﺍﻟﺘﺄﻣﻴﻨﺎﺕ ﺍﻹﺟﺘﻤﺎﻋﻴﺔ ﻓﻲ ﺍﻟﻤﺎﺩﺓ ) (١٩/٦ﻣﻨﻪ.
ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ﺳﺎﺭﻳﺔ ﺍﻟﻤﻔﻌﻮﻝ ﺣﺘﻰ ١٤٤٥/٠٧/١٧ﻫـ.
ﻋﻦ ﻃﺮﻳﻖ ﺍﺳﺘﺨﺪﺍﻡ ﺃﻭ ﻳﻠﺰﻡ ﺍﻟﺘﺤﻘﻖ ﻣﻦ ﺻﺤﺔ ﻭﺻﻼﺣﻴﺔ ﺍﻟﺸﻬﺎﺩﺓ ﻋﺒﺮ ﺯﻳﺎﺭﺓ ﺍﻟﺮﺍﺑﻂ
ﺍﻟﺮﻣﺰ ﺍﻟﻤﻌﺮﻑ ﺍﻟﺘﺎﻟﻲ : ﺃﺩﻧﺎﻩ ﻓﻲ ﺍﻟﻤﻮﻗﻊ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ ﻟﻠﻤﺆﺳﺴﺔ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺘﺄﻣﻴﻨﺎﺕ ﺍﻹﺟﺘﻤﺎﻋﻴﺔ
www.gosi.gov.sa/vc
ﺗﻌﺪ ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ﻣﻦ ﺍﻟﻮﺛﺎﺋﻖ ﺍﻻﻟﻜﺘﺮﻭﻧﻴﺔ ﺍﻟﺤﻜﻮﻣﻴﺔ ﺍﻟﺮﺳﻤﻴﺔ ،ﻭﻳﺤﻈﺮ ﻗﻄﻌﻴﺎ ﺗﻘﻠﻴﺪﻫﺎ ﺃﻭ ﺇﺩﺧﺎﻝ ﺃﻱ ﺗﻌﺪﻳﻼﺕ ﻋﻠﻴﻬﺎ ﺳﻮﺍﺀ ﺑﺎﻹﺿﺎﻓﺔ ﺃﻭ ﺍﻟﺤﺬﻑ
ﺃﻭ ﺍﻟﺘﻐﻴﻴﺮ ﻓﻲ ﺑﻴﺎﻧﺎﺗﻬﺎ ﺃﻭ ﻏﻴﺮ ﺫﻟﻚ ﻣﻦ ﺍﻧﻮﺍﻉ ﺍﻟﺘﻌﺪﻳﻞ ،ﻭﺗﻌﺪ ﺍﻟﺸﻬﺎﺩﺓ ﻻﻏﻴﺔ ﺇﺫﺍ ﺷﺎﺑﻬﺎ ﺷﻲﺀ ﻣﻦ ﺫﻟﻚ ،ﻛﻤﺎ ﺗﻌﺮﺽ ﺻﺎﺣﺒﻬﺎ ﻟﻠﻤﻼﺣﻘﺔ ﺍﻟﻨﻈﺎﻣﻴﺔ
ﺃﻣﺎﻡ ﺍﻟﺠﻬﺎﺕ ﺍﻟﻤﺨﺘﺼﺔ ﺑﺎﻹﺿﺎﻓﺔ ﺇﻟﻰ ﻣﺎﻳﻔﺮﺿﻪ ﻧﻈﺎﻡ ﺍﻟﺘﺄﻣﻴﻨﺎﺕ ﺍﻻﺟﺘﻤﺎﻋﻴﺔ ﻣﻦ ﻋﻘﻮﺑﺎﺕ ،ﻭﻻﻳﺠﻮﺯ ﺗﺪﺍﻭﻝ ﺍﻟﺸﻬﺎﺩﺓ ﺇﻻ ﻓﻲ ﺍﻷﻏﺮﺍﺽ ﺍﻟﺘﻲ
ﺃﺻﺪﺭﺕ ﻷﺟﻠﻬﺎ ﻭﻓﻘﺎ ﻷﺣﻜﺎﻡ ﻧﻈﺎﻡ ﺍﻟﺘﺄﻣﻴﻨﺎﺕ ﺍﻻﺟﺘﻤﺎﻋﻴﺔ ،ﻭﺍﻟﻤﺆﺳﺴﺔ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺘﺄﻣﻴﻨﺎﺕ ﺍﻻﺟﺘﻤﺎﻋﻴﺔ ﻏﻴﺮ ﻣﺴﺆﻭﻟﻪ ﻋﻦ ﺃﻱ ﺁﺛﺎﺭ ﺃﺧﺮﻯ ﻣﺘﺮﺗﺒﺔ
ﻗﺒﻞ ﺍﻟﻐﻴﺮ ﻋﻦ ﺍﻟﺸﻬﺎﺩﺓ ﻭﻏﻴﺮ ﻣﺴﺆﻭﻟﺔ ﻋﻦ ﺃﻱ ﻋﻤﻠﻴﺔ ﺗﺰﻭﻳﺮ ﺃﻭ ﺗﻌﺪﻳﻞ ﺗﺘﻢ ﻋﻠﻰ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻮﺍﺭﺩﺓ ﻓﻴﻬﺎ .
Saudization Certificate
ZAKAT & Tax Certificate
1110190529
٣٠٠٤٩٥٨٤٤٤
١١١٠١٩٠٥٢٩
ﻫـ١٤٤٤/٠٩/٢٥
ﺷﻬﺎدة
Certificate
The Zakat,Tax and Customs ﺗﺸﻬﺪ ﻫﻴﺌﺔ اﻟﺰﻛﺎة واﻟﻀﺮﻳﺒﺔ
Entity Unified No./ID No. ٧٠٠٠٠٢٣٤٩٤ رﻗﻢ ﻫﻮﻳﺔ/ اﻟﺮﻗﻢ اﻟﻤﻮﺣﺪ ﻟﻠﻤﻨﺸﺄة
Commercial Registration/License/
٢٠٥١٠٠٢٣٩٠ ﻋﻘﺪ رﻗﻢ/ رﺧﺼﺔ/ ﺳﺠﻞ ﺗﺠﺎري
Contract No
Has submitted his tax return for the period ending on 31/12/2022 AD, and he ، ﻫـ١٤٤٤/٠٦/٠٧ ﻗﺪم إﻗﺮاره ﻋﻦ اﻟﻔﺘﺮة اﻟﻤﻨﺘﻬﻴﺔ ﻓﻲ
was granted the certificate to complete all his transactions including the وﻗﺪ ﻣﻨﺢ ﻫﺬه اﻟﺸﻬﺎدة ﻹﻧﻬﺎء ﺟﻤﻴﻊ ﻣﻌﺎﻣﻼﺗﻪ ﺑﻤﺎ ﻓﻲ ذﻟﻚ ﺻﺮف
payment of the final amount due on the contract. .ﻣﺴﺘﺤﻘﺎﺗﻪ اﻟﻨﻬﺎﺋﻴﺔ ﻋﻦ اﻟﻌﻘﻮد
The Certificate is valid until 21/10/1445 AH corresponding to 30/04/2024 ﻫـ اﻟﻤﻮاﻓﻖ١٤٤٥/١٠/٢١ ﻳﺴﺮي ﻣﻔﻌﻮل ﻫﺬه اﻟﺸﻬﺎدة ﺣﺘﻰ ﺗﺎرﻳﺦ
AD م٢٠٢٤/٠٤/٣٠
( The Twenty first of Shawwal one thousand four hundred forty-five Hijri ) ( ) اﻟﺤﺎدي و اﻟﻌﺸﺮون ﻣﻦ ﺷﻮال أﻟﻒ و أرﺑﻌﻤﺎﺋﺔ و ﺧﻤﺴﺔ و أرﺑﻌﻮن ﻫﺠﺮي
This certificate is not valid until verified by the Authority's Website: www.zatca.gov.sa
1110190529
٣٠٠٤٩٥٨٤٤٤
١١١٠١٩٠٥٢٩
١٤٤٤/٠٩/٢٥ﻫـ
اﺧﺮى
ﻓﺮع اﻟﺸﺮﻛﻪ اﻟﺴﻌﻮدﻳﻪ ﻟﻠﻤﻮاد اﻟﻜﻬﺮﺑﺎﺋﻴﻪ اﻟﻤﺤﺪوده ١٠١٠٠٢٨٧٠٨
Riyadh
ﺟﺪة
ﻓﺮع اﻟﺸﺮﻛﺔ اﻟﺴﻌﻮدﻳﻪ ﻟﻠﻤﻮاد اﻟﻜﻬﺮﺑﺎﺋﻴﺔ اﻟﻤﺤﺪوده ٤٠٣٠٠٢٤٠٦٥
Jeddah
ﺟﺪة
ﻓﺮع اﻟﺸﺮﻛﺔ اﻟﺴﻌﻮدﻳﺔ ﻟﻠﻤﻮاد اﻟﻜﻬﺮﺑﺎﺋﻴﺔ اﻟﻤﺤﺪودة ٢٠٥٠١٢٨٩٠٠
Jeddah
ﺟﺪة
ﻓﺮع اﻟﺸﺮﻛﺔ اﻟﺴﻌﻮدﻳﺔ ﻟﻠﻤﻮاد اﻟﻜﻬﺮﺑﺎﺋﻴﺔ اﻟﻤﺤﺪودة ١٠١٠٤١٢٦٥٩
Jeddah
ﺟﺪة
اﻟﺸﺮﻛﺔ اﻟﺴﻌﻮدﻳﺔ ﻟﻠﻤﻮاد اﻟﻜﻬﺮﺑﺎﺋﻴﺔ ﻟﻠﻤﻘﺎوﻻت ١٠١٠٤٢٣٩٥٦
Jeddah
ﺟﺪة
اﻟﺸﺮﻛﺔ اﻟﺴﻌﻮدﻳﺔ ﻟﻠﻤﻮاد اﻟﻜﻬﺮﺑﺎﺋﻴﺔ اﻟﻤﺤﺪودة ٢٠٥٠١٣٣٨٤١
Jeddah
100171000027166
ﺗﺸﻬﺪ اﻟﻬﻴﺌﺔ اﻟﻌﺎﻣﺔ ﻟﻠﺰﻛﺎة واﻟﺪﺧﻞ ﺑﺄن اﳌﻜﻠﻒ :اﻟﴩﻛﺔ اﻟﺴﻌﻮدﻳﺔ ﻟﻠﻤﻮاد اﻟﻜﻬﺮﺑﺎﺋﻴﺔ اﳌﺤﺪودة
ﻣﺴﺠﻞ ﰲ ﴐﻳﺒﺔ اﻟﻘﻴﻤﺔ اﳌﻀﺎﻓﺔ ﺑﺘﺎرﻳﺦ ١٤٣٨/١٢/٠٢ :ﻫـ ،وﺗﺤﻤﻞ اﻟﺮﻗﻢ اﻟﴬﻳﺒﻲ ٣٠٠٤٩٥٨٤٤٤٠٠٠٠٣ :
ﺗﺸﻬﺪ اﻟﻬﻴﺌﺔ اﻟﻌﺎﻣﺔ ﻟﻠﺰﻛﺎة واﻟﺪﺧﻞ ﺑﺄن اﻟﻤﻜﻠﻒ أدﻧﺎه ﻣﺴﺠﻞ ﻓﻲ ﺿﺮﻳﺒﺔ اﻟﻘﻴﻤﺔ اﻟﻤﻀﺎﻓﺔ
ﺑﺘﺎرﻳﺦ 2017/08/24
Hereby, The General Authority of Zakat & Tax (GAZT) certifies that the taxpayer below is
VAT registered on 24/08/2017
ﻛﻤﻜﻠﻒ ﻣﺴﺠﻞ ﻓﻲ ﺿﺮﻳﺒﺔ اﻟﻘﻴﻤﺔ اﻟﻤﻀﺎﻓﺔ ،ﻻ ﻳﺠﻮز ﻟﻚ ﺗﺤﺼﻴﻞ ﺿﺮﻳﺒﺔ اﻟﻘﻴﻤﺔ اﻟﻤﻀﺎﻓﺔ ﻣﻦ ﻋﻤﻼﺋﻚ ﻗﺒﻞ ﺗﺎرﻳﺦ
ﻧﻔﺎذ اﻟﺘﺴﺠﻴﻞ ﺑﺎﻟﻀﺮﻳﺒﺔ .ﻓﻲ ﺣﺎل ﺗﺒﻴﻦ ﻏﻴﺮ ذﻟﻚ ،ﺳﺘﻘﻮم اﻟﻬﻴﺌﺔ اﻟﻌﺎﻣﺔ ﻟﻠﺰﻛﺎة واﻟﺪﺧﻞ ﺑﺘﻨﻔﻴﺬ اﻟﻐﺮاﻣﺎت اﻟﻤﺴﺘﺤﻘﺔ
100221047743804
First Filing due date: 2018/02/28 ﺗﺎرﻳﺦ اﺳﺘﺤﻘﺎق أول إﻗﺮار ﺿﺮﻳﺒﻲ:
ﻛﻤﻜﻠﻒ ﻣﺴﺠﻞ ﻓﻲ ﺿﺮﻳﺒﺔ اﻟﻘﻴﻤﺔ اﻟﻤﻀﺎﻓﺔ ،ﻻ ﻳﺠﻮز ﻟﻚ ﺗﺤﺼﻴﻞ ﺿﺮﻳﺒﺔ اﻟﻘﻴﻤﺔ اﻟﻤﻀﺎﻓﺔ ﻣﻦ ﻋﻤﻼﺋﻚ ﻗﺒﻞ ﺗﺎرﻳﺦ
ﻧﻔﺎذ اﻟﺘﺴﺠﻴﻞ ﺑﺎﻟﻀﺮﻳﺒﺔ .ﻓﻲ ﺣﺎل ﺗﺒﻴﻦ ﻏﻴﺮ ذﻟﻚ ،ﺳﺘﻘﻮم اﻟﻬﻴﺌﺔ اﻟﻌﺎﻣﺔ ﻟﻠﺰﻛﺎة واﻟﺪﺧﻞ ﺑﺘﻨﻔﻴﺬ اﻟﻐﺮاﻣﺎت اﻟﻤﺴﺘﺤﻘﺔ
100221047743804
ﻛﻤﻜﻠﻒ ﻣﺴﺠﻞ ﻓﻲ ﺿﺮﻳﺒﺔ اﻟﻘﻴﻤﺔ اﻟﻤﻀﺎﻓﺔ ،ﻻ ﻳﺠﻮز ﻟﻚ ﺗﺤﺼﻴﻞ ﺿﺮﻳﺒﺔ اﻟﻘﻴﻤﺔ اﻟﻤﻀﺎﻓﺔ ﻣﻦ ﻋﻤﻼﺋﻚ ﻗﺒﻞ ﺗﺎرﻳﺦ
ﻧﻔﺎذ اﻟﺘﺴﺠﻴﻞ ﺑﺎﻟﻀﺮﻳﺒﺔ .ﻓﻲ ﺣﺎل ﺗﺒﻴﻦ ﻏﻴﺮ ذﻟﻚ ،ﺳﺘﻘﻮم اﻟﻬﻴﺌﺔ اﻟﻌﺎﻣﺔ ﻟﻠﺰﻛﺎة واﻟﺪﺧﻞ ﺑﺘﻨﻔﻴﺬ اﻟﻐﺮاﻣﺎت اﻟﻤﺴﺘﺤﻘﺔ
National Address
ISO Certificate
Authorization letter by the
Manufacturer / Supplier
April 1, 2023
Certificate
(ITCC)
Yv%rcb2I~_~Jz4l;i1JL±~.v~Lv ~ t~AYVt~,JJ~SI~C.1JJI ~
~j~s..Jl ~JI ~≤14I LjL~z~’JI uJil .~ ~41jI ~ ~hIl~,$L~Jl ~pI3Jl YVSA~ ~ j.4.JI
CR. 4602002670 VAT No. 300098462700003 Tel. (012) 2885935 / 2889198 / 2886472 7147, Mustaqbal Avenue St., Entaj Dist., 2793
ZipCado: 2S9S9clnduttrinl-Velley, Phase±cking-AbdullMvEconomicOity, IRabigh.-I(O
E-mail: into@itco-group.com - website: www.itcc-group.com
Proof of
Certification/Listings, as
specified (eg. UL, ISO, FM
etc.)
8/23/22, 9:08 AM DWMU.E360446 - Conduit and Cable Hardware | UL Product iQ
Note: We are enhancing our systems and you may notice duplicate entries/missing/outdated data. During this interim period, please contact our
Customer Service at https://www.ul.com/about/locations.
Conduit Hangers, Model(s): CS-HAN050, CS-HAN075, CS-HAN100, CS-HAN125, CS-HAN150, CS-HAN200, CS-HAN250, CS-HAN300,
CS-HAN350, CS-HAN400
EMT and RMC hangers, Model(s): C-HAN050, C-HAN075, C-HAN100, C-HAN125, C-HAN125, C-HAN150, C-HAN200, C-HAN250, C-
HAN300, C-HAN350, C-HAN400
EMT One-Hole Straps, Model(s): CS-ES1050, CS-ES1075, CS-ES1100, CS-ES1125, CS-ES1150, CS-ES1200
EMT Strut Clamps, Model(s): USC-E050, USC-E075, USC-E100, USC-E125, USC-E150, USC-E200
EMT Two-Hole Straps, Model(s): CS-ES2050, CS-ES2075,, CS-ES2100, CS-ES2125, CS-ES2150, CS-ES2200
Rigid One-Hole Straps, Model(s): C-RS1050, C-RS1075, C-RS1100, C-RS1125, C-RS1150, C-RS1200, C-RS1250, C-RS1300, C-RS1350,
C-RS1400
Rigid Strut Clamps, Model(s): USC-R050, USC-R075, USC-R100, USC-R125, USC-R150, USC-R200, USC-R250, USC-R300, USC-R350,
USC-R400, USC-R500, USC-R600
Rigid Two-Hole Straps, Model(s): C-RS2050, C-RS2075, C-RS2100, C-RS2125, C-RS2150, C-RS2200, C-RS2250, C-RS2300, C-RS2350,
C-RS2400
Straps, one hole, Model(s): C-ES1050, C-ES1075, C-ES1100, C-ES1125, C-ES1150, C-ES1200
Straps, two hole, Model(s): C-ES2050, C-ES2075, C-ES2100, C-ES2125, C-ES2150, C-ES2200, C-RS2050, C-RS2075, C-RS2100, C-
RS2125, C-RS2150, C-RS2200, C-RS2250, C-RS2300, C-RS2350, C-RS2400
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL
Solutions' Follow - Up Service. Always look for the Mark on the product.
UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide Information,
Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner,
without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ with permission from UL Solutions" must appear
adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "©2022 UL LLC."
https://iq.ulprospector.com/en/profile?e=1193101 1/1
10/13/21, 1:14 PM DWTT.E360436 - Conduit Fittings | UL Product iQ
Note: We are enhancing our systems and you may notice duplicate entries/missing/outdated data. During this interim period, please contact our
Customer Service at https://www.ul.com/about/locations.
Conduit Fittings
INTERNATIONAL TUBE & CONDUIT CO LTD E360436
Plot (1B-15), King Abdullah Economical City
Jeddah Rabigh, 21433 Saudi Arabia
Model(s): C-ALN050, C-ALN075, C-ALN100, C-ALN125, C-ALN150, C-ALN200, C-ALN250, C-ALN300, C-ALN350, C-ALN400, C-ALN500,
C-ALN600, C-LKN037, C-LKN050, C-LKN075, C-LKN100, C-LKN125, C-LKN150, C-LKN200, C-LKN250, C-LKN300, C-LKN350, C-LKN400,
C-LKN500, C-LKN600, C-RB075A, C-RB100A, C-RB100B, C-RB125A, C-RB125B, C-RB125C, C-RB150A, C-RB150B, C-RB150C, C-RB150D,
C-RB200A, C-RB200B, C-RB200C, C-RB200D, C-RB200E, C-RBI050, C-RBI075, C-RBI100, C-RBI125, C-RBI150, C-RBI200, C-RBI250, C-
RBI300, C-RBI400, C-SLN050, C-SLN075, C-SLN100, C-SLN125, C-SLN150, C-SLN200, C-SLN250, C-SLN300, C-SLN350, C-SLN400, C-
SLN500, C-SLN600, C-TLN250, C-TLN300, C-TLN350, C-TLN400, C-TPC050, C-TPC075, C-TPC100, C-TPC125, C-TPC150, C-TPC200
Compression Connectors - Rigid, Model(s): R-CCN050, R-CCN075, R-CCN100, R-CCN125, R-CCN150, R-CCN200, R-ICC050, R-
ICC075, R-ICC100, R-ICC125, R-ICC150, R-ICC200
Compression Coupling - Rigid, Model(s): R-CCP050, R-CCP075, R-CCP100, R-CCP125, R-CCP150, R-CCP200
Set screw connectors (Concrete Tight, when taped), Model(s): R-CN0250, R-CN0300, R-CN0350, R-CN0400
Set screw connectors with insulator (Concrete Tight, when taped), Model(s): R-ISC250, R-ISC300, R-ISC350, R-ISC400
Set Screw Couplings - Rigid, Model(s): C-RCP050, C-RCP075, C-RCP100, C-RCP125, C-RCP150, C-RCP200
Set-screw Connectors - Rigid, Model(s): C-RCN050, C-RCN075, C-RCN100, C-RCN125, C-RCN150, C-RCN200, R-ISC050, R-ISC075, R-
ISC100, R-ISC125, R-ISC150, R-ISC200
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading
manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission
https://iq.ulprospector.com/en/profile?e=3269339 1/2
10/13/21, 1:14 PM DWTT.E360436 - Conduit Fittings | UL Product iQ
from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following
format: "© 2021 UL LLC"
https://iq.ulprospector.com/en/profile?e=3269339 2/2
10/13/21, 1:09 PM DYIX.E331696 - Rigid Ferrous Metal Conduit | UL Product iQ
Note: We are enhancing our systems and you may notice duplicate entries/missing/outdated data. During this interim period, please contact our
Customer Service at https://www.ul.com/about/locations.
Model(s): 1/2
Rigid Ferrous Metal Conduit Coupling, Model(s): 1 1/2-C-RCP150, 1 1/2-C-RNP150, 1 1/2-C-RNP1501000, 1 1/2-C-RNP1501200, 1
1/2-C-RNP150200, 1 1/2-C-RNP150300, 1 1/2-C-RNP150400, 1 1/2-C-RNP150500, 1 1/2-C-RNP150600, 1 1/2-C-RNP150800, 1 1/4-C-
RCP125, 1 1/4-C-RNP125, 1 1/4-C-RNP1251000, 1 1/4-C-RNP1251200, 1 1/4-C-RNP125200, 1 1/4-C-RNP125300, 1 1/4-C-RNP125400,
1 1/4-C-RNP125500, 1 1/4-C-RNP125600, 1 1/4-C-RNP125800
Rigid ferrous metal conduit couplings, Model(s): 1/2-C-RCP050, 1-C-RCP100, 1-C-RNP100, 1-C-RNP1001000, 1-C-RNP1001200, 1-
C-RNP100200, 1-C-RNP100212, 1-C-RNP100300, 1-C-RNP100400, 1-C-RNP100500, 1-C-RNP100600, 1-C-RNP100800, 2 1/2-C-
RCP250, 2 1/2-C-RNP250, 2 1/2-C-RNP2501000, 2 1/2-C-RNP2501200, 2 1/2-C-RNP250400, 2 1/2-C-RNP250500, 2 1/2-C-RNP250600,
2 1/2-C-RNP250800, 2-C-RCP200, 2-C-RNP200, 2-C-RNP2001000, 2-C-RNP2001200, 2-C-RNP200300, 2-C-RNP200400, 2-C-
RNP200500, 2-C-RNP200600, 2-C-RNP200700, 2-C-RNP200800, 3 1/2-C-RCP350, 3 1/2-C-RNP350, 3 1/2-C-RNP3501000, 3 1/2-C-
RNP3501200, 3 1/2-C-RNP350400, 3 1/2-C-RNP350500, 3 1/2-C-RNP350600, 3 1/2-C-RNP350800, 3/4-C-RCP075, 3/4-C-RNP075, 3/4-
C-RNP0751000, 3/4-C-RNP0751200, 3/4-C-RNP075200, 3/4-C-RNP075300, 3/4-C-RNP075400, 3/4-C-RNP075600, 3/4-C-RNP075800,
3-C-RCP300, 3-C-RNP300, 3-C-RNP3001000, 3-C-RNP3001200, 3-C-RNP300300, 3-C-RNP300400, 3-C-RNP300500, 3-C-RNP300600,
3-C-RNP300800, 4-C-RCP400, 4-C-RNP400, 4-C-RNP4001000, 4-C-RNP4001200, 4-C-RNP400400, 4-C-RNP400500, 4-C-RNP400600,
4-C-RNP400800, 5-C-RCP500, 6-C-RCP600, C-RCP050, C-RCP075, C-RCP100, C-RCP125, C-RCP150, C-RCP200, C-RCP250, C-RCP300,
C-RCP350, C-RCP400, C-RCP500, C-RCP600, C-RL9050, C-RL9075, C-RL9100, C-RL9125, C-RL9150, C-RL9200, C-RNP075, C-RNP100, C-
RNP125, C-RNP150, C-RNP200, C-RNP250, C-RNP300, C-RNP350, C-RNP400
Steel Electrical Rigid Metal Conduit, Model(s): 1, 1-1/2, 1-1/4, 2, 2-1/2, 3, 3/4, 4, 6
Steel rigid metal conduit couplings, Model(s): H-RCP050, H-RCP075, H-RCP100, H-RCP125, H-RCP150, H-RCP200, H-RCP250, H-
RCP300, H-RCP400, H-RCP500, H-RCP600
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading
manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission
https://iq.ulprospector.com/en/profile?e=2360149 1/2
10/13/21, 1:09 PM DYIX.E331696 - Rigid Ferrous Metal Conduit | UL Product iQ
from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following
format: "© 2021 UL LLC"
https://iq.ulprospector.com/en/profile?e=2360149 2/2
6/27/22, 1:17 PM KDER.E528787 - Grounding and Bonding Equipment | UL Product iQ
Note: We are enhancing our systems and you may notice duplicate entries/missing/outdated data. During this interim period, please contact our
Customer Service at https://www.ul.com/about/locations.
Insulated Grounding Bushings, Model(s): RBIG050, RBIG075, RBIG100, RBIG125, RBIG150, RBIG200, RBIG250, RBIG300, RBIG400
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading
manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission
from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following
format: "© 2022 UL LLC"
Cookies Settings
Cookies on UL
We use cookies to personalize content and ads, to provide social media
Accept All Cookies
features and to analyze our traffic. We also share information about your use
of our site with our social media, advertising and analytics partners. Learn
more
https://iq.ulprospector.com/en/profile?e=5004037 1/1
CERTIFICATE OF COMPLIANCE
Certificate Number UL-US-L331696-611-62401102-1
Report Reference E331696-20110426
Date 17-Aug-2021
Standard(s) for Safety: UL 6, 14th Ed., Issue Date: 2007-11-30, Revision Date:
2019-09-27
This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up
Services Procedure provides authorization to apply the UL Mark.
Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s
Follow-Up Services.
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
CERTIFICATE OF COMPLIANCE
Certificate Number UL-US-L331696-611-62401102-1
Report Reference E331696-20110426
Date 17-Aug-2021
This is to certify that representative samples of the product as specified on this certificate were tested according
to the current UL requirements
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
CERTIFICATE OF COMPLIANCE
Certificate Number 20150318-E331698
Report Reference E331698-20100730
Issue Date 2015-MARCH-18
Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Certification and Follow-Up Service.
Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1of1
10/13/21, 1:14 PM QCIT.E518282 - Metallic Outlet Boxes | UL Product iQ
Note: We are enhancing our systems and you may notice duplicate entries/missing/outdated data. During this interim period, please contact our
Customer Service at https://www.ul.com/about/locations.
Covers, Model(s): 52C0, 52C00, 52C1, 52C10, 52C13, 52C17-25, 52C20-25, 52C6, 52C8, 54C1, 54C1R, 54C6, 54C6R, 54C8, 54C8R, 58C1,
58C11, 58C16, 58C30, 58C4, 58C5, 58C6, 58C7, 72C1, 72C6, 72C8
Octagonal Drawn Boxes, Model(s): 54151-1/2, 54151-1/2&3/4, 54151-3/4, 54151C-1/2&3/4, 54171-1, 54171-1/2, 54171-1/2&3/4,
54171-3/4
Rectangular Boxes, Model(s): 58361-1/2, 58361-1/2&3/4, 58361-3/4, 58371-1, 58371-1/2, 58371-1/2&3/4, 58371-3/4
Square Drawn Boxes, Model(s): 52151-1/2, 52151-1/2&3/4, 52151-3/4, 52171-1, 52171-1/2, 52171-1/2&3/4, 52171-3/4, 72171-1,
72171-1/2, 72171-1/2&3/4, 72171-3/4
Square Weld Boxes, Model(s): 52171W-1, 52171W-1/2, 52171W-1/2&3/4, 52171W-3/4, 72171W-1, 72171W-1/2, 72171W-1/2&3/4,
72171W-3/4
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading
manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission
from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following
format: "© 2021 UL LLC"
https://iq.ulprospector.com/en/profile?e=1940645 1/1
CERTIFICATE OF COMPLIANCE
Certificate Number 20180427-E331697
Report Reference E331697-20121127
Issue Date 2018-APRIL-27
Standard(s) for Safety: UL 1242, Safety for Electrical Intermediate Metal Conduit -
Steel
Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Certification and Follow-Up Service.
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 1
10/13/21, 1:13 PM DWTT.E360436 - Conduit Fittings | UL Product iQ
**HISTORICAL**
Note: We are enhancing our systems and you may notice duplicate entries/missing/outdated data. During this interim period, please contact our
Customer Service at https://www.ul.com/about/locations.
Conduit Fittings
See General Information for Conduit Fittings
90 degree liquid-tight flexible metal conduit connectors Model(s) CFLT9038, CFLT9050, CFLT9075, CFLT9100, CFLT9125, CFLT9150, CFLT9200,
CFLT9250, CFLT9300, CFLT9350, CFLT9400
Compression connectors, rigid Model(s) R-CCN050, R-CCN075, R-CCN100, R-CCN125, R-CCN150, R-CCN200, R-ICC050, R-ICC075, R-ICC100, R-
ICC125, R-ICC150, R-ICC200
Compression couplings, rigid Model(s) R-CCP050, R-CCP075, R-CCP100, R-CCP125, R-CCP150, R-CCP200
Conduit Bushing Model(s) C-RBI050, C-RBI075, C-RBI100, C-RBI125, C-RBI150, C-RBI200, C-RBI250, C-RBI300, C-RBI400
Connectors, liquid-tight flexible metal conduit connectors, straight Model(s) CFLT038, CFLT050, CFLT075, CFLT100, CFLT125, CFLT150,
CFLT200, CFLT250, CFLT300, CFLT350, CFLT400
Liquid-tight locknuts Model(s) C-SLN050, C-SLN075, C-SLN100, C-SLN125, C-SLN150, C-SLN200, C-SLN250, C-SLN300, C-SLN350, C-SLN400, C-
SLN500, C-SLN600
Locknuts Model(s) C-ALN050, C-ALN075, C-ALN100, C-ALN125, C-ALN150, C-ALN200, C-ALN250, C-ALN300, C-ALN350, C-ALN400, C-ALN500, C-
ALN600, C-LKN037, C-LKN050, C-LKN075, C-LKN100, C-LKN125, C-LKN150, C-LKN200, C-LKN250, C-LKN300, C-LKN350, C-LKN400, C-LKN500, C-
LKN600, C-TLN250, C-TLN300, C-TLN350, C-TLN400
Reducer bushings Model(s) C-RB075A, C-RB100A, C-RB100B, C-RB125A, C-RB125B, C-RB125C, C-RB150A, C-RB150B, C-RB150C, C-RB150D, C-
RB200A, C-RB200B, C-RB200C, C-RB200D, C-RB200E
Set screw couplings, rigid Model(s) C-RCP050, C-RCP075, C-RCP100, C-RCP125, C-RCP150, C-RCP200
Set-screw connectors with insulators, concrete-tight when taped Model(s) R-ISC250, R-ISC300, R-ISC350, R-ISC400
Set-screw connectors, concrete-tight when taped Model(s) R-CN0250, R-CN0300, R-CN0350, R-CN0400
Set-screw connectors, rigid Model(s) C-RCN050, C-RCN075, C-RCN100, C-RCN125, C-RCN150, C-RCN200, R-ISC050, R-ISC075, R-ISC100, R-
ISC125, R-ISC150, R-ISC200
Set-screw couplings, concrete-tight when taped Model(s) R-CP0250, R-CP0300, R-CP0350, R-CP0400
Squeeze connectors, straight Model(s) C-FSC050, C-FSC075, C-FSC100, C-FSC125, C-FSC150, C-FSC200, C-FSC250, C-FSC300, C-FSC400
Three piece couplings Model(s) C-TPC050, C-TPC075, C-TPC100, C-TPC125, C-TPC150, C-TPC200
https://iq.ulprospector.com/en/profile?e=25911 1/2
10/13/21, 1:13 PM DWTT.E360436 - Conduit Fittings | UL Product iQ
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading
manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission
from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following
format: "© 2021 UL LLC"
https://iq.ulprospector.com/en/profile?e=25911 2/2
10/13/21, 1:07 PM FKAV.E362705 - Electrical Metallic Tubing Fittings | UL Product iQ
Note: We are enhancing our systems and you may notice duplicate entries/missing/outdated data. During this interim period, please contact our
Customer Service at https://www.ul.com/about/locations.
Compression connectors, Model(s): C-CCN050, C-CCN075, C-CCN100, C-CCN125, C-CCN150, C-CCN200, C-CCN250, C-CCN300, C-
CCN350, C-CCN400, C-ICC050, C-ICC075, C-ICC100, C-ICC125, C-ICC150, C-ICC200, C-ICC250, C-ICC300, C-ICC350, C-ICC400
Compression Connectors, Model(s): CZ-CCN0050, CZ-CCN0075, CZ-CCN0100, CZ-CCN0125, CZ-CCN0150, CZ-CCN0200, CZ-
CCN0250, CZ-CCN0300, CZ-CCN0400, CZ-CCN050, CZ-CCN075, CZ-CCN100, CZ-CCN125, CZ-CCN150, CZ-CCN200, CZ-CCN250, CZ-
CCN300, CZ-CCN400
Compression couplings, Model(s): C-CCP050, C-CCP075, C-CCP100, C-CCP125, C-CCP150, C-CCP200, C-CCP250, C-CCP300, C-
CCP350, C-CCP400
Compression Couplings, Model(s): CZ-CCP0050, CZ-CCP0075, CZ-CCP0100, CZ-CCP0125, CZ-CCP0150, CZ-CCP0200, CZ-CCP0250,
CZ-CCP0300, CZ-CCP0400, CZ-CCP050, CZ-CCP075, CZ-CCP100, CZ-CCP125, CZ-CCP150, CZ-CCP200, CZ-CCP250, CZ-CCP300, CZ-
CCP400
Set-screw connectors, Model(s): C-CN0050, C-CN0075, C-CN0100, C-CN0125, C-CN0150, C-CN0200, C-ICN050, C-ICN075, C-ICN100,
C-ICN125, C-ICN150, C-ICN200
Set-screw connectors, straight, Model(s): CZ-CN0050, CZ-CN0075, CZ-CN0100, CZ-CN0125, CZ-CN0150, CZ-CN0200, CZ-CN0250,
CZ-CN0300, CZ-CN0400
Set-screw couplings, Model(s): C-CP0050, C-CP0075, C-CP0100, C-CP0125, C-CP0150, C-CP0200, CZ-CP0050, CZ-CP0075, CZ-
CP0100, CZ-CP0125, CZ-CP0150, CZ-CP0200, CZ-CP0250, CZ-CP0300, CZ-CP0400
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading
manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission
https://iq.ulprospector.com/en/profile?e=1049189 1/2
10/13/21, 1:07 PM FKAV.E362705 - Electrical Metallic Tubing Fittings | UL Product iQ
from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following
format: "© 2021 UL LLC"
https://iq.ulprospector.com/en/profile?e=1049189 2/2
CERTIFICATE OF COMPLIANCE
Certificate Number UL-CA-2235263-0
Report Reference E331698-20100730
Date 14-Sep-2022
This is to certify that FJMX7 - Electrical Metallic Tubing Certified for Canada
representative samples of
See Addendum Page for Product Designation(s).
Standard(s) for Safety: CSA C22.2 No. 83.1-07, 2nd Ed., Issue Date: 2007-11-30,
Revision Date: 2021-03-30
This Certificate of Compliance indicates that representative samples of the product described in the certification
report have met the requirements for UL certification. It does not provide authorization to apply the UL Mark.
Only the Authorization Page that references the Follow-Up Services Procedure for ongoing surveillance
provides authorization to apply the UL Mark.
Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s
Follow-Up Services.
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
CERTIFICATE OF COMPLIANCE
Certificate Number UL-CA-2235263-0
Report Reference E331698-20100730
Date 14-Sep-2022
This is to certify that representative samples of the product as specified on this certificate were tested according
to the current UL requirements
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Verification Certificate
Verification Certificate
No. VC 693850
In respect of:
Type samples representative of the products listed have been tested and examined to the relevant
requirements of the normative reference(s) listed and have been found to comply with these
requirements.
For and on behalf of BSI: Frank Lee, Product Certification Technical and Compliance Director
Page: 1 of 2
Page: 1 of 2
This certificate has been issued by and remains the property of BSI Assurance UK Ltd, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, United
Kingdom and should be returned immediately upon request.
To check its validity telephone +44 (0) 345 080 9000. An electronic certificate can be authenticated online.
BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.
A member of BSI Group of Companies.
Verification Certificate
No. VC 693850
Type test report number: 8942873. CVC report no. GJW2018-3187BSI (XG1).
Product description
Products tested:
Page: 2 of 2
This certificate has been issued by and remains the property of BSI Assurance UK Ltd, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, United
Kingdom and should be returned immediately upon request.
To check its validity telephone +44 (0) 345 080 9000. An electronic certificate can be authenticated online.
BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.
A member of BSI Group of Companies.
QHSE Policy Statement
Previous Project Reference
Project
References
Project Name Region EPC Contractor Scope of Supply Order Value (Million $) Year
Conduits & Fittings
Steel & Weatherproof boxes
Explosion proof receptacles
ARAMCO Dhahran Aramco Explosion proof lighting fixtures 15.0 Annually
Wire identification markers
Grounding & lightning protection
Breakers etc.
Conduits & Fittings
Steel & Weatherproof boxes,
Explosion proof receptacles
Explosion proof lighting fixtures,
Saudi Electricity Company All Of Kingdom Sec Wire identification markers 10.0 Annually
Grounding & lightning protection
Breakers
Cable termination & Joints
Transmission line accessories etc.
BUS WAY & ATS & EARTHING AND LP
BACS CONDUITS AND FITTINGS
Riyadh Metro Riyadh FAST STEEL BOXES 10.0 2023
ANM SAFETY SWITCH AND WIRING DEVICES
ID LABEL & MARKING & TAGING SYSTEM
ATS
Conduits &fittings
Identification
MASAR Makkah Nesma & Partners 4.0 2023
Grounding
WP boxes
Isolators
CONDUITS AND FITTINGS
King Salman Airbase Facilities & BSS JV STEEL BOXES
Majmaah 3.0 2023
King Faisal Airbase NAS JV EARTHING AND LP
SAFETY SWITCH, ATS
EARTHING AND LP
CONDUITS AND FITTINGS
STC PROJECT Riyadh MOBCO & BEC 2.0 2023
STEEL BOXES
SAFETY SWITCH BUS WAY
EARTHING AND LP
Sulaiman Habib - Sulaiman Al CONDUITS AND FITTINGS
Riyadh MASAH 2.0 2023
Habib Hospital STEEL BOXES
SAFETY SWITCH
Cables
Conduits & fittings
flexible conduits
First Fix
lugs & glands
JAMED
King Salman Park Riyadh isolators 2.0 2023
Freyssinet
boxes
El Seif
WP Boxes
Identification
Grounding
Cables
Conduits & fittings
L01 Project Riyadh First Fix Contracting 1.0 2023
Flexible conduits
Lugs & glands
Wiring diveses
Transformers
Tamimi neom project Neom Tamimi Caples 8.5 2022
Pipes and fitings
Lighting.Panels
Explosion Proof
Conduits & fittings
Yanbu Distribution Hub Yanbu SSEM Explosion proof lighting fixtures 3.0 2022
Grounding & lightning protection
cable termination and accessories and bulk material
APOC Jubail Tecnimont Arabia Grounding material 1.5 2022
PVC coated
Rigid
PVC conduit and fittings
Marjan Pkg 2 Tanajib L&T 1.5 2022
Channels
Cable ties
Hardware, etc.
PVC coated
Rigid
HGURS - Hawaiyah and Unazah PVC conduit and fittings
Hwaaiyah CAT International Limited 2.0 2021
Gas Reservoir storage project Channels
Cable ties
hardware, etc.
Haradh Satellite Gas Compression
Haradh TEKFEN Cable Glands 1.8 2021
Project
Ethane Recovery EDRF
Uthmaniyah HDEC Cable management and accessories 4.0 2020
Uthmaniyah
Nesma
OMPP Onshore Maintain ARKAD Conduits & Fittings
Tanajib 2.5 2020
Potential Pipeline Aramco GCCC Instrumentation Fittings
NSH
Transformers
Lighting
TR Poles
Fadhli Gas Plant Fadhli Petrofac Junction Boxes 8.0 2019
NSH Conduits & fittings
Valves
Instrument Tubings
Lighting
Kentz Junction Boxes
Rastanurah Refinery Aramco Rastanurah 2.0 2019
NSH Conduits & fittings
Instrument Valves and Fittings
Lighting Fixtures
KAUST Thuwd Nesma 1.4 2019
Valves
Project
References
Project Name Region EPC Contractor Scope of Supply Order Value (Million $) Year
Conduits & Fittings
explosion proof boxes
SBG
isolators
KAIA ( King Abdul Aziz Al Mabani
Jeddah grounding material, 3.0 2018
International Airport) Safari
wire identification markers
INMA
Air field lightings
cable joints & terminations.
First Fix
Beijing Emirates & China Railway
KAP-5, Ministry of Interior All Of Kingdom Earthing Materials 2.4 2018
Construction CRCC
ATS Panels
Daewoo Conduits & fittings
Hanwa Explosion proof junction boxes
Jizan Refinery (JRTP/JRUP)- Jizan Jizan CCC, Cables termination & joints 2.1 2018
Saipem, Zamil Cable & accessories
Technicas Control panels.
Obstruction lightings
Isolators
JODP ( Jabal e Omar development Drake & Scull intl
Makkah Junction boxes, 2.0 2018
project ) Al Futtaim Engineering
Conduits & fittings
Cable markers
Conduits & Fittings
Steel & Weatherproof boxes
Explosion proof receptacles
KFAB (King Faisal Air Base) Tabuk CDM Constructions 1.2 2018
Explosion proof lighting fixtures
Wire identification markers
Grounding & lightning protection
First Fix
EL Seif
Sharma Project Tabuk ATS Panels 1.2 2018
AL Bawani
Identification Labels
Conduits &Fittings
Saipem
Khurais Expansion Khurais JBS 1.0 2018
Kentz
Tubings
First Fix
SANG Hospitals - National
All Of Kingdom Nesma & Partners ATS Panels 1.0 2018
Guard
Interior Lighting Fixtures
PVC coated
STP/ DSP - Jizan Jizan S.S.E.M Conduits & fittings 1.0 2018
Cables & accessories
FADHILI FADHILI TR CABLE GLANDS 0.9 2018
KAP-4 & KAP-2C & IPSO - Al Rashid Trading & Contracting
All Of Kingdom First fix materials 0.5 2018
MOI RTCC
Expec ARC Research Al Rashid Trading & Contracting
Dhahran ATS Panels 0.3 2018
Center - Aramco RTCC
Lighting fixtures and poles
Um’wal Phosphate plant Jacobs JBS
Turayf 9.0 2017
– Ma’aden Sinopec Conduits & fittings
Plugs and receptacles & more
Transformers
Hitachi, Petrofac Lighting
SKEC Poles
Jazan Refinery Jizan CCC Junction Boxes 19.5 2016
Hyundai condutis & fittings
TR Earting,grounding
Termination kit
Lighting
Midyan Tabuk L&T Junction Boxes 1.5 2016
Condutis & fittings
Yanbu PP Yanbu Samsung Conduits & Fittings, JBS, cables 1.1 2016
Lighting
Junction Boxes
Satorp 2 Jubail HQCEC 1.0 2016
Grounding cables
Condutis & fittings
Electrial and Telecom Bulk
Petrofac
Lighting
Petro Rabigh 2 Rabigh JGC 4.5 2015
JBS
Alrushaid
Cable ladders
JGC Junction boxes
Sadara Jubail Daewoo Lighting, panels 2.5 2015
Jacbos Bulks
Lighting
Sadara Jubail TEKFEN 1.1 2015
Junction Boxes
Sadara Jubail Fluor Electrical Bulk material, JBs 0.8 2015
TR Electrical Bluk material
Petrokemya Jubail 6.0 2014
Daelim Grounding and Lighting protection
Kemya Jubail TR, Technip Conduits, Fittings, JBS, Electrical Bulks 1.2 2014
Cables
JBS
Worley Parsons
Samref Yanbu Electrical Bulks 16.0 2013
Al Rushaid
Lighting
Panels
Conduits & Fittings
Ma’aden Smelter Ras Al Khair Samsung 2.5 2013
BS, other Electrical Bulks
Project
References
Project Name Region EPC Contractor Scope of Supply Order Value (Million $) Year
Grounding cables
Sadara Jubail Daelim Conduits, Fittings 1.2 2013
Junction Boxes etc.
Conduits & Fittings
Shoaibah Power Plant Shoaibah Daelim Junction 4.0 2012
Boxes
Conduits & Fittings
Rabigh PP Rabigh Doosan 3.0 2012
JBS, other Electrical Bulks
Conduits & Fittings
Shaybah NGL Shaybah Samsung 1.8 2012
JBS ,other Electrical Bulks
Cable Trays
Bulk Electrical Material
YANSAB HDPE & BTX Yanbu Stone & Webster Panelboards 3.5 2009
Lightning Protection
Grounding
Cable Trays
AKER Kvarner
Bulk Electrical Material
Netherlands
YANSAB LDPE & PP Yanbu Panelboards 4.5 2008
Sinopec
Lightning Protection
5th construction company
Grounding
Bulk Electrical Materails
Marshelling boxes
Lightning Protection,
Rabigh – IWSPP Rabigh Mitsubishi Heavy Industries 2.2 2008
Aircraft warning lights
Transformers
Panelboards
Bulk Electrical Material
Panelboards
YANSAB LDPE & PP Yanbu Sinopec Shanghai Engineering Company 1.7 2008
Lightning Protection
Grounding
Cable Trays
Fluor Daniel USA Bulk Electrical Material
YANSAB UOU Yanbu SBG- PCM Panelboards 1.0 2008
MS Sewedi Lightning Protection
Grounding
Cable Trays
Fencing
Base Frames
Petro Rabigh UOU Rabigh Hitachi Plant Technologies Bulk Electrical Material 3.1 2007
Cables
Control Stations
Classified area wiring devices Junction Boxes
Bulk Electrical Materia
Petro Rabigh, UOU Rabigh Foster Wheeler Lightning and Earthing material 3.0 2007
Light Fixtures
Cable Trays,Bulk Electrical Material
Panelboards
YANSAB LDPE & PP Yanbu Toyo Engineering Co 1.1 2007
Lightning Protection
Grounding
Bulk Electrical Material
Petro Rabigh UOU Rabigh Sinopec Shanghai Engineering Lightning and Earthing materia 0.4 2007
Light Fixtures
Cable Trays
Petro Rabigh UOU Rabigh Nichiman Bulk Electrical Material 0.4 2007
Lightning and Earthing material
Previous Project Approvals
Programme: King Abdullah Financial District (KAFD)
All accessories shall be from the same brand and as per spec. &
3 MS GEN 1
white color.
Name: Mohammed Salah Name: Richard P. Russell Name: Name: Wasil Waheed
Position: Lead Elec. Eng. Position: Program Director Position: Position: QAQC Engineer Electrical
*Approval status from the Reviewer shall be deemed as permission to proceed but shall not relieve the Originator from full compliance with contractual requirements*
14 Outer Regions
Riyadh, KSA
Riyadh
Saudi Arabia
Status N/A
(0 selected)
Revision
File Document No Revision Title Status
Date
MESSAGE
The attached documents have completed the "14-4800000322/000-IN-Construction - IFR" workflow with the following results :
No objection subject to
14-662000-4800000322-
NEOM/AECOM_Review Y Soliman A - Work May Proceed compliance with project
MOB-ELE-MAT-000005
requirements
https://ksa1.aconex.com/Logon 1/2
12/29/21, 8:33 AM Aconex
https://ksa1.aconex.com/Logon 2/2
Material Submittal
Rev.01 - 23 Dec.2021
14-662000-4800000322-MOB-ELE-MAT-000005
Page 1 NEOM CRS Template
Transmittal / Document Title 4800000322/000 - EMT, Rigid & Flexible Conduits and accessories Status Code: Work May Proceed A
Document Type Material Submittal - Stage04 - Construction & Handover & Close-out CRS Prepared by: Aon Muhammad (AON) - Material Eng.
PMC/Design Reviewer CRS Reviewed by: Ahmad Mouneimne (AMM) - Technical Lead
PMC/Design Reviewer CRS Approved by: Tim Baker (TJB) - Technical Lead Sign
Discipline(s) involved MAT
Date 28-Dec-21
Disclaimer : Permission to proceed shall not constitute acceptance or approval of design details, calculations, analyses, test methods or materials developed or selected by the Contractor and shall not relieve the Contractor from full compliance with Contractual obligations and NEOM requirements
Status Codes: All codes must be as per NEOM Documents NEOM-NPR-PLN-101 (Design Management Plan) & N E O M - N E N - P R C - 030 (Project Document Numbering and Revision Procedure)
A = Work may proceed , B = Incorporate Comments - Proceed , C = Revise & Resubmit - Do not Proceed , D= Rejected, E = Review not required - Proceed
Responded
No. Doc/Section/ Page NEOM`s Design Reviewer/PMC Comments Comments made by Initial Status NEOM`s Designer Response Revised Status
By
Relevant Discipline No:1
Page 2 of document No. 14-662000- No objection subject to compliance with project requirements
1 MAT - AON A
4800000322-MOB-ELE-MAT-000005
RMC conduit,
Accessories, and Fittings
are approved by ITCC.
The compliance sheet
provided by the supplier is
accepted. The RMC
conduit and Fittings size
to be used shall be as per
Supervision Consultant Accepted with specification and
S Aoun
Review Comments approved shop drawings.
The fittings/accessories
shall be by the same
manufacturer, only one
manufacturer is to be
used for one prototype.
Sample for each item shall
be submitted for final
approval by the Engineer.
Cc (2) Mr Hussein Shobaki - The Red Sea Development Company (+1 more...)
Status N/A
(0 selected)
R12-T07B11-MSL-MAT-EL-0025 00 Material Submittal for Rigid Steel Conduits Accepted with Comments
ATTRIBUTES
MESSAGE
The attached documents have completed the "R12-T07B11 - (MSL) - Material Submittal for Rigid Steel Conduits" workflow with the following
results :
Review
Doc No Step Participant Comments
Outcome
https://ksa1.aconex.com/Logon?Action=View&ENTITY=MAIL&ID=1349188610&USERID=1342249696 1/3
2/28/2021 Aconex
i. The proposed Rigid Steel Conduit from ITCC is accepted. The other
documents and material are submitted is not part of the acceptance. ii. The
size of the RGS conduit as per the design approval. iii. RGS conduit is
accepted for exposed area installation. iv. The cable conduit filling shall not
Electrical Accepted
exceed the 40%. v. All bends and joint shall be supplied by same supplier.
Manager - H Bafhaid with
vi. deliver functional and operational systems that comply with codes
Review Comments
requirements and contract. vii. The acceptance with comments is subject to
the Contractor implementing above comments during execution, any failure
in not implementing the comments will invalid the given conditional
acceptance.
Mechanical Review
Manager - A Nahhas Not
Review Required
Civil Review
Manager - Y Navsa Not
Review Required
Structural Review
Manager - A Das Not
Review Required
Waste
Review
Management
K Ibrahim Not
Manager -
Required
Review
https://ksa1.aconex.com/Logon?Action=View&ENTITY=MAIL&ID=1349188610&USERID=1342249696 2/3
2/28/2021 Aconex
Project
Accepted
Manager / I
with See comments by technical team
Director - Abulhamayel
Comments
Approval
https://ksa1.aconex.com/Logon?Action=View&ENTITY=MAIL&ID=1349188610&USERID=1342249696 3/3
7(&+1,&$/68%0,77$/
6XEPLWWDO5HIHUHQFH7'&70$5(/ 'DWH
3URMHFW1DPHDdZK>/E</EdZϭΘdZϮ &RQWUDFWRUdĞĐŚŶŝĐĂůĞǀĞůŽƉŵĞŶƚĐŽ͘&ŽƌŽŶƚƌĂĐƚŝŶŐ
5$&3URMHFW0DQDJHU &RQVXOWDQW:63
^ƵďŵŝƚƚĂůĞƚĂŝůƐ;ďLJƚŚĞŽŶƚƌĂĐƚŽƌͿ
dLJƉĞŽĨ^ƵďŵŝƚƚĂů͗
܈0DWHULDO ܆6KRS'UDZLQJV ' ܆HVLJQ'UDZLQJV ܆7HVW5HSRUW ܈0DQXIDFWXUHU¶V'DWD
܆0HWKRG6WDWHPHQW ܆3UHTXDOLILFDWLRQ ܆$V%XLOW'UDZLQJV ܆6DPSOH & ܈DWDORJXHV
܆2WKHUV
ŝƐĐŝƉůŝŶĞ͗
܆$UFKLWHFWXUDO & ܆LYLO6WUXFWXUH ܆0HFKDQLFDO ( ܈OHFWULFDO ܆3URMHFW&RQWUROV * ܆HQHUDO
^ƵďŵŝƚƚĂůĞƐĐƌŝƉƚŝŽŶ͗
%5$1',7&&
6833/,(5 0$,1(/(&75,&+286(,7&&
ŽĐƵŵĞŶƚƐZĞǀŝĞǁ;ďLJZ͛ƐdžĞĐƵƚŝŽŶdĞĂŵͿ
܆$FFHSWHG ܆5HMHFWHG
dĞĐŚŶŝĐĂůZĞǀŝĞǁ;ďLJZ͛ƐŶŐŝŶĞĞƌŝŶŐͬdžĞĐƵƚŝŽŶdĞĂŵͿ
܆$$SSURYHG ܆%$SSURYHGDV1RWHG & ܆5HYLVH 5HVXEPLW ' ܆5HMHFWHG
- ITCC is approved as manufacturer for EMT. Below shall be followed by the contractor:
a. Installation of EMT shall only be done for cable route installation above false ceiling.
b. Contractor to use steel compression coupling and connectors.
c. The size for EMT shall be chosen to ensure that the fill rate does not exceed 40% as per NEC.
d. minimum conduit size to be 3/4in
e. EMT must be supported every 3-10ft.
- Contractor to gain final approval for conduit sizes with the approval of the electrical load schedule.
- Contractor to follow IEC 61386 for conduit systems for cable management.
ƉƉƌŽǀĂůƐŚĂůůŶŽƚƌĞůŝĞǀĞŽŶƚƌĂĐƚŽƌŽĨŚŝƐůŝĂďŝůŝƚŝĞƐƵŶĚĞƌƚŚĞŽŶƚƌĂĐƚŽƌĐŽŶƐƚŝƚƵƚĞĂƵƚŚŽƌŝnjĂƚŝŽŶŽĨĂŶLJĐŚĂŶŐĞƚŽŽŶƚƌĂĐƚŽĐƵŵĞŶƚƐ͘
d,E/>^hD/dd>&KZD WĂŐĞϭŽĨϭ
Make approved, comply the comments inside. Ensure all materials used for the Fire
alarm installation are approved by local civil defence.
Approval shall not relive the contractor from any responsibilities he has under the
contract including responsibility to deliver as per tender design, NGESS and
specifications. Contractor shall be solely responsible for errors, omissions,
discrepancies and non-compliance in their submittal.
Shijo c varghese 23/06/2021
~lgnw.JI gS.otJI
Soudi Ammco
2. All Fittings for EMT should Comply with Steel or Die-cast compression type .
L I
ATTACMENT(S):
DOCUMENT STATUS:
I
J I ITO RESUBMIT
II
ACCEPTED
ACCEPTED WITH COMMENTS lx I REJECTED
t.t~ .
1
2
CERTIFICATES
Compression couplings, rigid Model(s) R-CCP050, R-CCP075, R-CCP100, R-CCP125, R-CCP150, R-CCP200
USL Steel Electrical Metallic Tubing elbows in trade sizes Liquid-tight locknuts Model(s) C-SLN050, C-SLN075, C-SLN100, C-SLN125, C-SLN150, C-SLN200, C-SLN250, C-SLN300, C-SLN350, C-
SLN400, C-SLN500, C-SLN600
1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, and 4.
Locknuts Model(s) C-ALN050, C-ALN075, C-ALN100, C-ALN125, C-ALN150, C-ALN200, C-ALN250, C-ALN300, C-ALN350, C-ALN400, C-
ALN500, C-ALN600, C-LKN037, C-LKN050, C-LKN075, C-LKN100, C-LKN125, C-LKN150, C-LKN200, C-LKN250, C-LKN300, C-LKN350, C-
LKN400, C-LKN500, C-LKN600, C-TLN250, C-TLN300, C-TLN350, C-TLN400
Have been investigated by UL in accordance with the
Reducer bushings Model(s) C-RB075A, C-RB100A, C-RB100B, C-RB125A, C-RB125B, C-RB125C, C-RB150A, C-RB150B, C-RB150C, C-
Standard(s) indicated on this Certificate. RB150D, C-RB200A, C-RB200B, C-RB200C, C-RB200D, C-RB200E
Set screw couplings, rigid Model(s) C-RCP050, C-RCP075, C-RCP100, C-RCP125, C-RCP150, C-RCP200
Standard(s) for Safety: UL 797, Electrical Metallic Tubing – Steel Set-screw connectors with insulators, concrete-tight when taped Model(s) R-ISC250, R-ISC300, R-ISC350, R-ISC400
Additional Information: Set-screw connectors, concrete-tight when taped Model(s) R-CN0250, R-CN0300, R-CN0350, R-CN0400
See the UL Online Certifications Directory at
Set-screw connectors, rigid Model(s) C-RCN050, C-RCN075, C-RCN100, C-RCN125, C-RCN150, C-RCN200, R-ISC050, R-ISC075, R-ISC100,
www.ul.com/database for additional information R-ISC125, R-ISC150, R-ISC200
Set-screw couplings, concrete-tight when taped Model(s) R-CP0250, R-CP0300, R-CP0350, R-CP0400
Only those products bearing the UL Certification Mark should be considered as being covered by UL's Squeeze connectors, straight Model(s) C-FSC050, C-FSC075, C-FSC100, C-FSC125, C-FSC150, C-FSC200, C-FSC250, C-FSC300, C-FSC400
Certification and Follow-Up Service. Three piece couplings Model(s) C-TPC050, C-TPC075, C-TPC100, C-TPC125, C-TPC150, C-TPC200
Look for the UL Certification Mark on the product. Last Updated on 2015-01-09
© 2015 UL LLC
When the UL Leaf Mark is on the product, or when the word "Environment" is included in the UL Mark, please search the UL Environment
database for additional information regarding this product's certification.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory
with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in
the following format: "© 2015 UL LLC".
Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 1
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=DWTT.E360436&ccnshorttitle=Conduit+Fittings&objid=1082990163&cfgi… 1/1
DWMU.E360446
Conduit and Cable Hardware
Page Bottom
EMT Two-Hole Straps, Model(s) Cat. Nos. CS-ES2050, CS-ES2075, CS-ES2100, CS-ES2125, CS-ES2150, CS-ES2200
MANUFACTURER CONTACT:
Rigid One-Hole Straps, Model(s) Cat. Nos. C-RS1050, C-RS1075, C-RS1100, C-RS1125, C-RS1150, C-RS1200, C-RS1250, C-RS1300, C-
RS1350, C-RS1400 Mr. Shelesh Tiwari
Mob: (+966)-5-60673166
Rigid Two-Hole Straps, Model(s) Cat. Nos. C-RS2050, C-RS2075, C-RS2100, C-RS2125, C-RS2150, C-RS2200, C-RS2250, C-RS2300, C-
RS2350, C-RS2400
WITNESS TEST ENGINEER:
Straps, one hole, Model(s) C-ES1050, C-ES1075, C-ES1100, C-ES1125, C-ES1150, C-ES1200 Mr. Abhishek Kandoi
Straps, two hole, Model(s) C-ES2050, C-ES2075, C-ES2100, C-ES2125, C-ES2150, C-ES2200, C-RS2050, C-RS2075, C-RS2100, C-RS2125, Mob: (+971) 555640887
C-RS2150, C-RS2200, C-RS2250, C-RS2300, C-RS2350, C-RS2400
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide UL PROJECT NO:
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non- 4787186263
misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory
with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in
the following format: "© 2015 UL LLC".
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=DWMU.E360446&ccnshorttitle=Conduit+and+Cable+Hardware&objid=… 1/1
3
TABLE OF CONTENTS
STEEL CONDUIT 5
FITTINGS FOR EMT 13
FITTINGS FOR IMC/RIGID 22
CONDUIT BODIES 37
FITTINGS FOR FLEXIBLE METAL CONDUIT 42
MISCELLANEOUS ACCESSORIES 45
STEEL BOXES & COVERS 50
WEATHERPROOF BOXES & COVERS 55
PVC COATED RIGID STEEL CONDUIT 59
STEEL TUBES & PIPES 63
PROJECT REFERENCES 71
4
STEEL CONDUIT
REVOLUTIONARY QUALITY PROCESS
6
7
EMT- ELECTRICAL METALLIC TUBING
8
RMC - RGS - RIGID METAL CONDUIT
9
IMC - INTERMEDIATE METAL CONDUIT
10
FLEXIBLE STEEL CONDUIT
v 0RWRU)HHGHU%UDQFK&RQWUROFULFXLWFRQGXFWRUV
DQGFDEOH
v (QYLURQPHQWDODLUKDQGOLQJVSDFHV
v &RQFHDOHGRUH[SRVHGLQVWDOODWLRQV
v (OHYDWRUVKRLVWZD\VHVFDODWRUV
1111
LIQUID TIGHT FLEXIBLE STEEL CONDUIT
v 39&&RYHUZLOOKDYHPLQLPDOZULQNOHZKHQ%HQG v ,QGRRUDQG2XWGRRULQVWDOODWLRQVZKHUHOLTXLGWLJKW
v 5HVLVWDQWWR2LOVDQGJUHDVHV SURRILQJLVUHTXLUHG
v &DEOHPDQDJHPHQWIRUFRQYH\RUVEORZHUVFUDQHKRLVW
v 7HPSHUDWXUH5DQJH&WR&
+9$&PDFKLQHDQGHTXLSPHQW VHWF
v 89UHVLVWDQWDQG6XLWDEOHIRUH[WHUQDO8VH v 'HVLJQHGIRUERWKFRPPHUFLDODQGLQGXVWULDODSSOLFDWLRQV
12 11
FITTINGS FOR EMT
FITTINGS FOR EMT
Set Screw Type Connector with Insulated Throat - Zinc Die Cast
Catalog Unit Ship Weight/ Dimensions (in)
Number Size Carton Case Case A B C
CZI-CN0050 ½” 50 500 35 1.16 .400 1.06
CZI-CN0075 ¾” 25 250 25 1.39 .400 1.30
CZI-CN0100 1” 50 200 30 1.55 .520 1.52
CZI-CN0125 1-¼” — 25 8 1.93 .560 1.95
CZI-CN0150 1-½” — 25 10 2.28 .720 1.18
CZI-CN0200 2” — 20 11 2.50 .730 2.64
CZI-CN0250 2-½” — 12 10 3.08 .920 3.27
CZI-CN0300 3” — 12 12 3.37 1.050 3.91
CZI-CN0350 3-½” — 10 13 3.46 1.050 4.46
CZI-CN0400 4” — 6 8 3.75 1.050 4.99
½” - 1” 1Screw 1¼”- 4” 2 Screw
14
FITTINGS FOR EMT
15
FITTINGS FOR EMT
16
FITTINGS FOR EMT
17
FITTINGS FOR EMT
Dimensions (in)
Catalog Unit Ship Weight/
Number Size Carton Case Case A B C D
PE-EB050 ½” 10 100 31 1.31 1.09 2.40 1.80
PE-EB075 ¾” 5 50 18 1.47 1.29 2.66 2.14
PE-EB100 1” — 25 21 2.80 1.60 3.66 3.16
PE-EB125 1-¼” — 20 25 3.13 1.96 5.16 3.24
Dimensions (in)
Catalog Unit Ship Weight/
Number Size Carton Case Case A B C D
PE-EE050 ½” 10 100 24 1.31 .94 2.50 1.78
PE-EE075 ¾” 5 50 19 1.59 1.24 2.76 2.13
PE-EE100 1” ... 25 16 1.94 1.61 3.86 3.17
PE-EE125 1-¼” ... 20 20 2.26 2.00 4.56 3.25
18
FITTINGS FOR EMT
Set Screw Type - EMT to EMT - Inside Corner - Zinc Die Cast
Features
• Set screw assemblye provides concrete
tight connections when taped
• Removable cover facilitates wire pulling
Applications
• Dry location use
• Use to connect EMT conduit together on
a 90˚ inside corner
Standard Material
• Zinc die cast
19
FITTINGS FOR EMT
EMT Straps
Snap-On Type - One Hole - Steel
Features
• Snap-on type EMT strap with one hole
• Inverted rib for strength
Applications
• Support EMT conduit
Standard Material
• Steel
Catalog Unit Ship Weight/ Dimensions (in) Standard Finish
Number Size Carton Case Case A B • Zinc plated
ES-1050 ½” 100 1000 25 1.79 .57
ES-1075 ¾” 100 1000 30 1.96 .62
ES-1100 1” 50 500 25 2.25 .75
ES-1125 1-¼” 25 250 20 2.85 .88
ES-1150 1-½” 10 100 12 3.16 .99
ES-1200 2” 10 100 16 3.93 1.10
ES-1250 2-½” — 50 21 5.00 1.28
ES-1300 3” — 25 13 5.55 1.28
ES-1350 3-½” — 25 18 6.37 1.28
ES-1400 4” --- 25 20 6.87 1.28
20
COLOR
ELBOWS,
ELECTRICAL
COUPLINGS
METALLIC
AND NIPPLES
TUBING
EMT Elbows
90° - Galvanized Steel
Features
• Low conductivity, high corrosion
resistance
• Smooth defect free interior and
exterior
Applications
• For a secure connection to EMT
conduit; bend enables directional
changes in conduit
(B) Standard Material
(A) Straight • Galvanized steel
Catalog Ship Weight/ Min. UL Leg Each (C)
Number Size Case Case Radius End Offset
EL-9050 ½” 50 12 4.000 2.875 6.343
EL-9075 ¾” 50 22 4.500 2.875 6.781
EL-9100 1” 20 16 5.750 3.00 8.901
EL-9125 1-¼” 20 29 7.250 3.25 10.25
EL-9150 1-½” 10 20 8.250 3.625 11.937
EL-9200 2” 10 27 9.500 4.1875 14.031
EL-9250 2-½” 50 6 10.500 5.25 16.00
EL-9300 3” 35 9 13.000 5.8125 18.947
EL-9350 3-½” 35 11 15.000 6.75 22.218
EL-9400 4” 25 15 16.000 6.9375 23.437
EMT Elbows
45° - Galvanized Steel
Features
• Low conductivity, high corrosion
resistance
• Smooth defect free interior and
exterior
Applications
• For a secure connection to EMT
conduit; bend enables directional
changes in conduit
Standard Material
• Galvanized steel
(B)
(A) Straight
Catalog Ship Weight/ Min. UL Leg Each
Number Size Case Case Radius End
EL-4050 ½” 50 11 4.00 2.875
EL-4075 ¾” 50 19 4.50 2.875
EL-4100 1” 35 25 5.750 3.00
EL-4125 1-¼” 30 30 7.250 3.25
EL-4150 1-½” 15 44 8.250 3.625
EL-4200 2” 15 31 9.5 4.1875
EL-4250 2-½” 1 5 10.5 5.25
EL-4300 3” 1 7 13 5.8125
EL-4350 3-½” 1 9 15 6.75
EL-4400 4” 1 12 16 6.9375
21
FITTINGS FOR IMC / RIGID
FITTINGS FOR IMC / RIGID
Rigid Connectors
Compression Type - Steel
Features
• Concrete tight when taped
• Threadless
Applications
• Used to join unthreaded Rigid or IMC
conduit to steel outlet box or metal
enclosure
Standard Material
• Malleable iron
Standard Finish
Dimensions (in) • Zinc plated
Catalog Unit Ship Weight/
Number Size Carton Case Case A B
R-CCN050 ½” 20 200 13 1.50 1.50
R-CCN075 ¾” 10 100 20 1.50 1.63
R-CCN100 1” 5 50 36 1.687 2.00
R-CCN125 1-¼” 5 50 64 2.00 2.38
R-CCN150 1-½” — 12 92 2.0625 2.63
R-CCN200 2” — 12 117 2.25 3.31
R-CCN250 2-½” — 5 14 3.00 3.75
R-CCN300 3” — 3 13 3.125 4.25
R-CCN350 3-½” — 2 13 3.187 4.75
R-CCN400 4” — 2 13 3.437 5.312
Rigid Couplings
Compression Type - Steel
Features
• Compression type
• Concrete tight
• Threadless
Applications
• Used to join two lengths unthreaded
Rigid or IMC conduit to steel outlet
box or metal enclosure
Standard Material
• Malleable iron
Dimensions (in) Standard Finish
Catalog Unit Ship Weight/
Number Size Carton Case Case A B
• Zinc plated
R-CCP050 ½” 10 100 16 1.81 1.50
R-CCP075 ¾” 10 100 24 1.87 1.62
R-CCP100 1” 5 50 48 2.18 2.00
R-CCP125 1-¼” 5 50 86 2.62 2.37
R-CCP150 1-½” — 12 125 2.68 2.62
R-CCP200 2” — 5 160 3.00 3.31
R-CCP250 2-½” — 5 260 5.75 3.93
R-CCP300 3” — 3 300 5.72 4.66
R-CCP350 3-½” — 2 350 6.00 5.20
R-CCP400 4” — 2 400 6.81 5.75
23
FITTINGS FOR IMC / RIGID
Dimensions (in)
Catalog Unit Ship Weight/
Number Size Carton Case Case A B C D
PE-RR050 ½” 10 100 28 1.31 1.09 2.50 1.78
PE-RR075 ¾” 5 50 17 1.43 1.29 2.76 2.13
PE-RR100 1” — 25 16 1.95 1.59 3.86 3.17
PE-RR125 1-¼” --- 20 18 2.26 1.97 4.56 3.25
Dimensions (in)
Catalog Unit Ship Weight/
Number Size Carton Case Case A B C D
PE-RB050 ½” 10 100 31 1.31 1.09 2.40 1.80
PE-RB075 ¾” 5 50 18 1.47 1.29 2.66 2.14
PE-RB100 1” --- 25 21 2.80 1.60 3.66 3.16
PE-RB125 1-¼” --- 20 25 3.13 1.96 5.16 3.24
24
FITTINGS FOR IMC / RIGID
Rigid Couplings
Three Piece Type
Features
Die Cast Zinc / Malleable Iron / Steel • For threaded Rigid or IMC conduit
Applications
• Use as a threaded coupling between
lengths of threaded Rigid or IMC conduit
Standard Material
• Malleable iron / Die cast zinc / Steel
Standard Finish
• Zinc plated
25
FITTINGS FOR IMC / RIGID
26
FITTINGS FOR IMC / RIGID
Rigid Straps
Snap-On Type One Hole - Steel
Features
• Inverted rib for strength
• Easy to install
Applications
• Indoor or outdoor use
• Use to secure Rigid or IMC conduit to
wood, masonry or where greater load
Catalog Unit Ship Weight/ Dimensions (in) bearing is required
Number Size Carton Case Case A B Standard Material
RS1050 ½” 50 500 21 1.91 .625 • Steel
RS1075 ¾” 50 500 15 2.21 .750
RS1100 1” 25 250 25 2.57 .875
RS1125 1-¼” 20 200 20 2.79 .880
RS1150 1-½” 20 200 32 3.69 .899
RS1200 2” 10 100 22 4.17 1.14
RS1250 2-¼” — 50 21 5.00 1.28
RS1300 3” — 25 13 5.55 1.28
RS1350 3-½” — 25 18 6.37 1.28
RS1400 4” — 25 20 6.87 1.28
RS1500 5” — 10 5 9.00 1.50
RS1600 6” — 10 6 10.35 1.50
Features
• Greater load bearing capability
Snap-On Type Two Hole - Steel • Easy to install
Applications
• Indoor or outdoor use
• Use to secure Rigid or IMC conduit to
wood, masonry or where greater load
bearing is required
Standard Material
• Steel
Catalog Unit Ship Weight/ Dimensions (in)
Number Size Carton Case Case A B
RS2050 ½” 50 500 13 2.43 .625
RS2075 ¾” 50 500 16 2.81 .685
RS2100 1” 25 250 12 3.28 .750
RS2125 1-¼” 20 200 13 4.02 .875
RS2150 1-½” 10 100 12 4.58 1.00
RS2200 2” — 50 7 5.22 1.00
RS2250 2-½” — 25 6 5.91 1.00
RS2300 3” — 25 7 6.71 1.00
RS2350 3-½” — 25 8 7.51 1.00
RS2400 4” — 25 7 8.31 1.00
RS2500 5” — 10 5 10.60 1.25
RS2600 6” — 10 6 11.85 1.25
27
FITTINGS FOR IMC / RIGID
Male Bushing
Features
Die Cast Zinc / Malleable Iron • Threaded NPSM for Rigid conduit
and IMC
• Use with locknuts
Applications
• Serves as a short raceway between
enclosures
Standard Material
• Die cast zinc /Malleable iron
28
FITTINGS FOR IMC / RIGID
Conduit Bushing
Non-insulated / Zinc Die Cast
Features
• Rounded surface of the bushing
prevents damage to wire insulation
Applications
• Indoor or outdoor use
• Use with locknut to terminate threaded
Rigid or IMC conduit to an outlet box
Standard Material
• Zinc die cast
29
FITTINGS FOR IMC / RIGID
30
COLOR
ELBOWS,
ELECTRICAL
COUPLINGS
METALLIC
AND NIPPLES
TUBING
Rigid Elbows
90° - Galvanized Steel
Features
• Low conductivity, high corrosion
resistance
• Smooth defect free interior and exterior
Applications
• For a secure connection to Rigid
conduit; bend enables directional
(B) changes in conduit
(A) Straight Standard Material
Catalog Ship Weight/ Min. UL Leg Each (C) • Galvanized steel
Number Size Case Case Radius End Offset
RL9050 ½” 50 40 4.00 2.875 6.343
RL9075 ¾” 50 54 4.50 2.875 6.781
RL9100 1” 20 40 5.750 3.00 8.901
RL9125 1-¼” 20 60 7.250 3.25 10.25
RL9150 1-½” 10 42 8.250 3.625 11.937
RL9200 2” 10 68 9.50 4.1875 14.031
RL9250 2-½” 1 13 10.50 5.25 16.00
RL9300 3” 1 18 13.00 5.8125 18.947
RL9350 3-½” 1 26 15.00 6.75 22.218
RL9400 4” 1 33 16.00 6.9375 23.437
RL9500 5” 1 45 24.00 11.125 36.156
RL9600 6” 1 48 30.00 12.4375 41.460
31
COLOR
ELBOWS,
ELECTRICAL
COUPLINGS
METALLIC
AND NIPPLES
TUBING
RNP075
¾” 1-½ 25
¾” 2 25
¾” 2-½ 25
¾” 3 25
CNP200 2” 25 1” 3 25
CNP300 3” 1 1” 4 25
CNP350 3-½” 1 1” 5 25
CNP400 4” 1 1” 6 25
CNP500 5” 1 1” 8 1
CNP600 6” 1 1” 10 1
1” 12 1
32
COLOR
ELBOWS,
ELECTRICAL
COUPLINGS
METALLIC
AND NIPPLES
TUBING
Conduit Nipples
Galvanized Steel
(continued)
RNP125 RNP250
Lenght Ship Lenght Ship
Size Inches Case Size Inches Case
1-¼” 2 25 2-½” 3 1
1-¼” 2-½ 25 2-½” 3-½ 1
1-¼” 3 25 2-½” 4 1
1-¼” 3-½ 25 2-½” 5 1
1-¼” 4 25 2-½” 6 1
1-¼” 5 25 2-½” 8 1
1-¼” 6 25 2-½” 10 1
1-¼” 8 1 2-½” 12 1
1-¼” 10 1
1-¼” 12 1
RNP300
3” 3 1
RNP150 3” 3-½ 1
1-½” 2 25 3” 4 1
1-½” 2-½ 25 3” 5 1
1-½” 3 25 3” 6 1
1-½” 3-½ 25 3” 8 1
1-½” 4 25 3” 10 1
1-½” 5 25 3” 12 1
1-½” 6 25
1-½” 8 1
1-½” 10 1
RNP350
1-½” 12 1 3-½” 4 1
3-½” 5 1
3-½” 6 1
RNP200 3-½” 8 1
2” 2-½ 25 3-½” 10 1
2” 3 25 3-½” 12 1
2” 3-½ 40
2” 4 40
2” 5 40 RNP400
4” 4 1
2” 6 30
4” 5 1
2” 8 1
4” 6 1
2” 10 1
4” 8 1
2” 12 1
4” 10 1
4” 12 1
33
COLOR
ELBOWS,
ELECTRICAL
COUPLINGS
METALLIC
AND NIPPLES
TUBING
Rigid Couplings
Tubular Threaded Type - Galvanized Steel
Features
• NPSM thread type Applications
• Indoor or outdoor use
• Use to join and ensure proper
alignment of threaded Rigid or IMC
conduit
Standard Material
• Steel Standard Finish
• Zinc plated
Dimension (in)
Catalog Threads Ship Weight /
Number Size Per Inch Case Case A B
RCP050 ½” 14 100 .12 1.63 1.563
RCP075 ¾” 14 50 .17 1.64 1.625
RCP100 1” 11-½ 30 .29 1.97 2.000
RCP125 1-¼” 11-½ 25 .38 2.03 2.063
RCP150 1-½” 11-½ 25 .53 2.06 2.063
RCP200 2” 11-½ 20 .70 2.13 2.125
RCP250 2-½” 8 12 1.80 2.19 3.125
RCP300 3” 8 8 2.26 3.31 3.250
RCP350 3-½” 8 4 3.50 3.41 3.375
RCP400 4” 8 4 3.13 3.52 3.500
RCP500 5” 8 2 4.75 3.95 3.750
RCP600 6” 8 1 7.65 4.25 4.000
34
FITTINGS FOR IMC / RIGID
Catalog Threads Per Unit Ship Weight/ Dimensions (in) Thread Pitch
Number Size Inch Carton Case Case A B Diameter
LKNZ050 ½” 14 200 2000 20 1.12 .15 .787- .797
LKNZ075 ¾” 14 100 1000 20 1.33 .15 .999- 1.009
LKNZ100 1” 11-½ 100 1000 20 1.68 .19 1.250- 1.260
LKNZ125 1-¼” 11-½ 50 500 20 2.15 .19 1.595- 1.605
LKNZ150 1-½” 11-½ 50 500 20 2.35 .19 1.837- 1.847
LKNZ200 2” 11-½ 50 200 12 2.89 .19 2.307- 2.317
LKNZ250 2-½” 8 25 100 13 3.43 .25 2.777- 2.788
LKNZ300 3” 8 25 100 18 4.12 .25 3.403- 3.414
LKNZ350 3-½” 8 10 40 13 4.67 .27 3.892- 3.904
LKNZ400 4” 8 10 40 15 5.25 .27 4.399- 4.411
Catalog Threads Per Unit Ship Weight/ Dimensions (in) Thread Pitch
Number Size Inch Carton Case Case A B Diameter
LKN050 ½” 14 100 2000 20 1.15 .110 .787- .797
LKN075 ¾” 14 100 1000 20 1.45 .115 .999- 1.009
LKN100 1” 11-½ 100 1000 30 1.75 .140 1.250- 1.260
LKN125 1-¼” 11-½ 50 500 20 2.10 .140 1.595- 1.605
LKN150 1-½” 11-½ 50 500 30 2.40 .140 1.837- 1.847
LKN200 2” 11-½ 25 250 20 2.95 .140 2.307- 2.317
LKN250 2-½” 8 — 50 6 3.55 .185 2.777- 2.788
LKNZ00 3” 8 — 50 9 3.55 .190 3.403- 3.414
LKN350 3-½” 8 — 25 6 4.20 .190 3.892- 3.904
LKN400 4” 8 — 25 7 4.75 .190 4.399- 4.411
LKN500 5” 8 — 10 5 6.67 .380 5.488- 5.500
LKN600 6” 8 — 10 8 7.93 .400 6.545- 6.557
35
FITTINGS FOR IMC / RIGID
Features
• Zinc plated with PVC molded gasket for a
Sealing Locknuts watertight seal
Applications
Steel • Indoor or outdoor use
• Use to secure Rigid, IMC conduit or various
threaded fittings to a steel outlet box or other
metal enclosures, when moisture proof
protection is required
Standard Material
• Steel
Standard Finish
• Zinc plated
• PVC gasket
Catalog Threads Per Unit Ship Weight/ Dimensions (in) Thread Pitch
Number Size Inch Carton Case Case A B Diameter
LKN050SL ½” 14 50 500 10 1.12 .26 .787-.797
LKN075SL ¾” 14 50 500 16 1.37 .27 .999-1.009
LKN100SL 1” 11-½ 25 250 4 1.75 .28 1.250-1.260
LKN125SL 1-¼” 11-½ 10 100 8 2.06 .32 1.595-1.605
LKN150SL 1-½” 11-½ 10 100 8 2.37 .32 1.837-1.847
LKN200SL 2” 11-½ 10 100 12 2.87 .32 2.307-2.317
LKN250SL 2-½” 8 --- 25 5 3.43 .32 2.777-2.788
LKN300SL 3” 8 --- 25 5 4.12 .32 3.403-3.414
LKN350SL 3-½” 8 --- 25 6 4.62 .32 3.892-3.904
LKN400SL 4” 8 --- 25 6 5.18 .32 4.399-4.411
LKN500SL 5” 8 --- 5 6 6.67 .50 5.488-5.500
LKN600SL 6” 8 --- 5 10 7.83 .52 6.545-6.557
Reducing Bushings
Steel / Die Cast Zinc
Catalog Ship Weight/ Dimensions (in)
Number Size Case Case A B
RB75/50 ¾” x ½” 100 4 .650 .920
RB100/50 1”x½” 50 6 .715 1.125
RB100/75 1” x ¾” 50 3 .715 1.125
RB125/50 1-¼” x ½” 25 7 .820 1.470
RB125/75 1-¼” x ¾” 25 6 .820 1.470
RB125/100 1-¼” x 1” 25 4 .820 1.470
RB150/150 1-½” x ½” 25 10 .850 1.700
RB150/75 1-½” x ¾” 25 9 .850 1.700
Features RB150/100 1-½” x 1” 25 7 .850 1.700
• Rounded bushing protects conductor RB150/125 1-½” x 1-¼” 25 3 .850 1.700
Applications
• Dry location use only RB200/50 2” x½” 10 5 .970 2.230
• Use to reduce the entry size of a run of RB200/75 2” x ¾” 10 8 .970 2.230
threaded conduit RB200/100 2” x 1” 10 7 .970 2.230
Standard Material
RB200/125 2” x 1-¼” 10 5 .970 2.230
• Steel
Standard Finish RB200/150 2” x 1-½” 10 4 .970 2.230
• Zinc plated RB250/100 2-½” x 1 10 9 1.563 2.750
RB250/125 2-½” x 1-¼” 10 9 2.090 2.845
RB250/150 2-½” x 1-½” 10 8 1.125 2.820
RB250/200 2-½” x 2 10 5 1.200 3.485
36
CONDUIT BODIES
CONDUIT BODIES
Features
Combination (EMT/IMC/RIGID) • Set screw and threaded LL type
LL Type • Suitable for use in concrete
• NPT Tapered hubs
• NEMA FB1 rated for wet locations use
with hreaded rigid metal conduit only
Applications
• Provides access to conductors for
pulling, splicing and maintenance
Standard Material
• Copper free aluminum die cast
• Steel screws
Standard Finish
• Powder coat
Features
Combination (EMT/IMC/RIGID) • Set screw and threaded LR type
• Suitable for use in concrete
LR Type • NPT Tapered hubs
• NEMA FB1 rated for wet locations use
with threaded rigid metal conduit only
Applications
• Provides access to conductors for
pulling, splicing and maintenance
Standard Material
• Copper free aluminum die cast
• Steel screws
Standard Finish
• Powder coat
38
CONDUIT BODIES
Conduit Bodies
Features
• Set screw and threaded LB type
• Suitable for use in concrete
Combination (EMT/IMC/RIGID) • NPT Tapered hubs
LB Type • NEMA FB1 rated for wet locations use
with threaded rigid metal conduit only
Applications
• Provides access to conductors for
pulling, splicing and maintenance
Standard Material
• Copper free aluminum die cast
• Steel screws
Standard Finish
• Powder coat
Features
Combination (EMT/IMC/RIGID) • Set screw and threaded C type
• Suitable for use in concrete
C Type • NPT Tapered hubs
• NEMA FB1 rated for wet locations use
with threaded rigid metal conduit only
Applications
• Provides access to conductors for
pulling, splicing and maintenance
Standard Material
• Copper free aluminum die cast
• Steel screws
Standard Finish
• Powder coat
39
CONDUIT BODIES
Combination (EMT/IMC/RIGID)
T Type Features
• Set screw and threaded T type
• Suitable for use in concrete
• NPT Tapered hubs
• NEMA FB1 rated for wet locations use
with threaded rigid metal conduit only
Applications
• Provides access to conductors for
pulling, splicing and maintenance
Standard Material
• Copper free aluminum die cast
• Steel screws
Standard Finish
• Powder coat
40
CONDUIT BODIES
41
FITTINGS FOR FLEXIBLE METAL CONDUIT
FITTINGS FOR FLEXIBLE METAL CONDUIT (FMC)
Dimensions (in)
Catalog Unit Ship Weight/ B
Number Size Carton Case Case A (Min.-Max.) C Screws
CFSC050 ½” 25 250 25 1.47 0.74-0.95 .400 1
CFSC075 ¾” 25 250 32 1.58 0.88-1.11 .400 1
CFSC100 1” 10 100 20 1.75 1.14-1.38 .540 1
CFSC125 1-¼” 10 100 29 1.91 1.42-1.65 .640 1
CFSC150 1-½” 5 50 20 2.09 1.68-1.94 .750 1
CFSC200 2” 10 40 21 2.34 2.08-2.56 .740 1
CFSC250 2-½” — 10 9 2.81 2.85-3.25 .875 2
CFSC300 3” — 10 17 3.84 3.33-3.63 1.03 2
CFSC350 3-½” — 1 3 4.19 3.75-4.10 1.03 2
CFSC400 4” — 1 3 4.56 4.18-4.58 1.03 2
* Insulated models are also available. Please add “- I ” to the part number while ordering (CFSC050I)
Dimensions (in)
Catalog Unit Ship Weight/ B
Number Size Carton Case Case A (Min.-Max.) C Screws
CFSC9050 ½” 25 250 35 2.110 0.64- 1.03 .400 2
CFSC9075 ¾” 10 100 20 2.400 0.76- 1.15 .400 2
CFSC9100 1” 5 50 19 2.870 1.09- 1.73 .540 2
CFSC9125 1-¼” 10 40 20 4.000 1.34- 1.97 .640 2
CFSC9150 1-½” --- 5 5 6.000 1.65- 2.61 .750 2
CFSC9200 2” --- 5 6 6.000 1.54- 2.54 .740 2
CFSC9250 2-½” --- 5 18 7.187 2.45- 2.98 .875 4
CFSC9300 3” --- 2 9 7.875 2.93- 3.45 1.031 4
CFSC9350 3-½” --- 1 9 9.400 3.28- 3.95 1.031 4
CFSC9400 4” --- 1 10 10.200 3.68- 4.43 1.031 4
* Insulated models are also available. Please add “- I ” to the part number while ordering (CFSC9050I)
43
FITTINGS FOR LIQUID TIGHT CONDUIT
Dimensions (in)
Catalog
Number Size Unit Carton Ship Case Weight/Case A B C
CFLT050 ½” 20 200 40 1.500 1.385 .420
CFLT075 ¾” 10 100 23 1.603 1.720 .420
CFLT100 1” 5 50 20 1.792 1.900 .550
CFLT125 1-¼” 5 50 30 1.900 2.290 .546
CFLT150 1-½” 2 20 15 1.737 2.633 .520
CFLT200 2” 2 20 24 2.080 3.156 .585
CFLT250 2-½” --- 1 1 3.025 4.205 .775
CFLT300 3” --- 1 2 3.530 4.910 .920
CFLT350 3-½” — 1 3 3.660 5.470 .920
CFLT400 4” — 1 4 3.875 5.925 .987
Dimensions (in)
Catalog
Number Size Unit Carton Ship Case Weight/Case A B C
CFLT9050 ½” 10 100 28 2.220 2.340 .52
CFLT9075 ¾” 10 100 38 2.550 3.550 .68
CFLT9100 1” 5 50 32 2.820 3.785 .67
CFLT9125 1-¼” 2 20 20 3.362 3.960 .70
CFLT9150 1-½” 2 20 26 3.450 4.130 .70
CFLT9200 2” 1 10 19 4.036 4.700 .57
CFLT9250 2-½” — 1 4 5.215 5.375 .77
CFLT9300 3” — 1 5 6.100 6.500 1.10
CFLT9350 3-½” — 1 6 6.715 7.450 1.10
CFLT9400 4” — 1 7 6.780 8.00 1.10
44
MISCELLANEOUS ACCESSORIES
MISCELLANEOUS ACCESSORIES
Features
Combination Couplings • Screw in to compression type
• Combination coupling used to join
flexible metal conduit to EMT
Screw In Type - EMT Compression to Flex - Zinc Die Cast Applications
• Indoor use only
• Use to joi n EMT conduit to flexi ble
metallic conduit
• Suitable for: ½” steel, steel reduced
wall, and aluminum flexible metal
conduit to EMT, ¾”-1” flexible metal
conduit to EMT
Standard Material
• Zinc die cast
Features
• Provides smooth, rounded surfaces
at ends of raceways and avoids
Dimensions (in) abrasion damage to cables
Catalog Unit Ship Weight/
Number Size Carton Case Case A B
Applications
• Indoor use only
EIB050 ½” 100 1000 5 .522 .570
• Protects cables in communications
EIB075 ¾” 100 1000 6 .538 .764 and security systems against abrasion
EIB100 1” 50 500 5 .614 .954 from edge of EMT
Standard Material
EIB125 1-¼” 25 250 4 .620 1.26
• Polyethelene
EIB150 1-½” 25 250 5 .620 1.44 • Black / Clear Color Available
EIB200 2” 20 200 5 .619 1.86
EIB250 2-½” — 25 1 1.12 2.34
EIB300 3” — 25 2 1.19 2.78
EIB350 3-½” — 25 2 1.22 3.27
EIB400 4” — 25 2 1.22 3.71
46
MISCELLANEOUS ACCESSORIES
Flex Couplings
Features
Screw In Type • Screw in coupling
Applications
• Indoor use only
• Use to join two pieces of flexible
metallic conduit
Standard Material
• Zinc die cast
Dimensions (in)
Catalog
Number Conduit Size Unit Carton Ship Case Weight/Case A B C
CPFF050 ½” 50 500 30 1.80 .92 1.062
CPFF075 ¾” 25 250 23 2.09 1.12 1.372
CPFF100 1” 25 250 38 2.41 1.37 1.687
CPFF125 1-¼” 10 100 25 2.74 1.81 2.125
CPFF150 1-½” 10 40 16 3.05 2.12 2.375
CPFF200 2” 10 40 24 3.27 2.67 2.937
Combination Couplings
Set Screw Type - EMT to Flex Features
• Set screw type
• EMT to flex combination coupling
• UL listed
Applications
• Indoor use only
• Use to join EMT conduit to flexible
metal conduit
Standard Material
• Zinc die cast
Dimensions (in)
Catalog
Number Size Unit Carton Ship Case Weight/Case A Min. A Max. B
CPEF050S ½” - ½” 25 250 25 .75 .95 1.65
CPEF075S ¾” - ¾” — 100 15 .75 1.20 1.93
CPEF100S 1” - 1” __ 50 13 1.14 1.61 2.12
47
MISCELLANEOUS ACCESSORIES
Dimensions (in)
Catalog
Number Size Ship Case Weight/Case A B
USC050 ½” 100 19 1.24 2.23
USC075 ¾” 100 21 1.24 2.42
USC100 1” 100 23 1.24 2.77
USC125 1-¼” 100 26 1.24 3.09
USC150 1-½” 50 26 1.24 3.38
USC200 2” 50 31 1.24 3.77
USC250 2-½” 50 32 1.24 4.47
USC300 3” 25 18 1.24 5.08
USC350 3-½” 25 21 1.24 5.74
USC400 4” 25 25 1.24 6.30
Conduit Hangers
Features
With Bolt & Nut Attached - Steel • Assembled with nut and bolt
Applications
• Indoor or outdoor use
• Use to secure and suspend conduit
from overhead supports
Standard Material
• Steel
Standard Finish
• Zinc plated
Dimensions (in)
Catalog For Rigid
Number Size & EMT Bolt Size Ship Case Weight/Case A B C D
HAN050 0 ½” ¼” - 20 100 6 1.875 .750 .725 .25
HAN075 1 ¾” ¼” - 20 100 8 2.125 .750 .850 .25
HAN100 2 1” ¼” - 20 100 8 2.437 .875 .975 .25
HAN125 3 1-¼” ¼” - 20 100 10 2.75 .875 .975 .25
HAN150 4 1-½” ¼” - 20 100 18 3.125 1.000 1.125 .25
HAN200 5 2” ¼” - 20 50 10 3.875 1.000 1.145 .25
HAN250 6 2-½” 5/16”- 18 50 11 4.625 1.250 1.225 .3125
HAN300 7 3” 5/16”- 18 25 6 5.500 1.250 1.275 .3125
HAN350 8 3-½” 5/16”- 18 25 8 5.750 1.250 1.275 .3125
HAN400 9 4” 5/16”- 18 25 12 6.250 1.250 1.275 .3125
48
MISCELLANEOUS ACCESSORIES
Conduit Bending
Aluminum Conduit Benders
Features
• Lightweight aluminum construction
for easy handling
• Heat treated for extra
strength-reinforced at stress points
for longer life
• Precision-located degree scale, star,
arrow and rim notch for perfect bends
everytime
• Markings are raised and cast into .
bender body on both sides for easy
visibility
• Deeply serrated step helps prevent
slippage when applying maximum
leverage
• Grooved internal hook surface helps
prevent conduit from slipping
• Flat hok surface provides stable
starting point.
Catalog
Number Conduit Type & Size
CB050 ½” EMT
CB075 ¾” EMT, ½” IMC / RIGID
CB100 1” EMT, ¾” IMC / RIGID
CB125 1 ¼” EMT, 1” IMCI / RIGID
49
STEEL BOXES AND COVERS
STEEL BOXES AND COVERS
Knockouts
Catalog Cubic Ship Weight/
Number Description Sides Bottom Inches Case Case
BOXES
B-54151-½ 1-½” deep ½” KO with raised emboss & 10-32 ground (2) - ½” &
(4)- ½” 15.5 50 24
screw (2) - ¾”
B-54151-¾ 1-½” deep ¾” KO with raised emboss & 10-32 ground (2) - ½” &
(4)- ¾” 15.5 50 26
screw (2) - ¾”
B-54151-½ & ¾ 1-½” deep ½” & ¾” KO with raised emboss & 10-32 ground (2)- ½”& (2) - ½” & ¾” CON.
15.5 50 26
screw (2)- ¾” (2) - ½”
B-54171-½ 2-1/8” deep ½” KO with raised emboss & 10-32 ground
(4)- ½” (4) - ½” 21.5 50 28
screw
B-54171-½ & ¾ 2-1/8” deep ½” & ¾” KO with raised emboss & 10-32 (2)- ½” (2) - ½” &
21.5 50 31
ground screw (2)-¾” (2) - ¾”
B-54171-1 2-1/8” deep 1” KO with raised emboss & 10-32 ground (2)- ½” &
(4)- 1” 21.5 50 42
screw (2) - ¾”
COVERS
B-54-C1 Blank flat (1) Hole & (1) Slot --- --- - 100 23
B-54-C6 Flat (1) ½” KO, (1) Hole & (1) Slot --- (1)½” - 100 23
B-54-C1 B-54-C6
51
STEEL BOXES AND COVERS
Features
• Boxes - Drawn
• Boxes - 1-7/8”
• Boxes - 10.5 / 13.5 / 14.5 cu. in.
• Available in multiple KO sizes, with or
without concentric KOs and raised
ground emboss with installed 10-32
ground screw where noted
Applications
• Handy boxes, also referred to as utility
boxes are used for switch boxes,
convenience outlets or small junction
boxes in exposed work applications
• Great for appliances and machinery
• ITCC handy utility boxes have
a small, rectangular design that enables
power outlets and switches to be
installed in small places
• Can easily be customized with special
holes or knockouts for OEM
applications
Standard Material
• Galvanized steel
Knockouts
Catalog
Number Description Sides Bottom Cubic Inches Ship Case Weight/Case
B-58361-½ 1-7/8” deep ½” KO with raised ground emboss & 10-32
(8) - ½” (2) - ½” 13.0 50 24
ground screw
B-58361-¾ 1-7/8” deep ¾” KO with raised ground emboss & 10-32
(6) - ¾” (1)- ¾” 13.0 50 24
ground screw
52
STEEL BOXES AND COVERS
Features
4” Square Boxes, Drawn • Drawn
• 1-½” deep
• 21 cu. in.
• Available in multiple KO sizes, with or
without concentric KOs and raised
ground emboss with installed 10-32
ground screw where noted
Applications
• 4” square drawn junction boxes can be
installed in walls or ceilings for lighting
fixtures, switches, receptacles or other
outlet devices. Square boxes are used
to bring power to a number of electrical
devices where multiple conductor runs
are split in two or more directions
Standard Material
• Galvanized steel
Knockouts
Catalog Cubic Ship Weight/
Number Description Sides Bottom Inches Case Case
B-52151-½ 1-½” deep ½” KO raised ground emboss & 10-32 (2) - ½”
(12)- ½' 21 50 31
ground screw (2) - ¾”
B-52151-¾ 1-½” deep ¾” KO raised ground emboss & 10-32 (2) - ½” &
(8) - ¾” 21 50 31
ground screw (2) - ¾”
B-52151-½ & ¾ 1-½” deep ½”& ¾” KO raised ground emboss & 10-32 (8) - ½” & (2) - ½” &
21 50 31
ground screw (4) - ¾” (2) - ¾”
Covers
B-52-C1 Blank Flat (1) Hole & (1) Slot
53
STEEL BOXES AND COVERS
Features
• Drawn
• 2-1/8” deep offer extra cubic capacity
• 30.5 cu. in.
• Available in multiple KO sizes and
raised ground emboss with installed
10/32 ground screw where noted
Applications
• 4” square drawn junction boxes can
be installed in walls or ceilings for
lighting fixtures, switches, receptacles
or other outlet devices
• Square boxes are used to bring power
to a number of electrical devices
where multiple conductor runs are
split in two or more directions
Standard Material
• Galvanized steel
Knockouts
Catalog
Number Description Sides Bottom Cubic Inches Ship Case Weight/Case
B-52171-½ 2-1/8” deep ½” KO with raised ground
(12)- ½” (2) - ½” (2) - ¾” 30.5 50 41
emboss & 10-32 ground screw
B-52171-¾ 2-1/8” deep ¾” KO with raised ground
(8) - ¾” (2) - ½” (2) - ¾” 30.5 50 39
emboss & 10-32 ground screw
B-52171-½ & ¾ 2-1/8” deep ½” & ¾” KO with raised ground (8)- ½”&
(2) - ½” (2) - ¾” 30.5 50 41
emboss & 10-32 ground (4) - ¾”
B-52171-1 2-1/8” deep ¾” & 1” KO with raised ground
(8) - 1” (2) ½” & (2) ¾” 30.5 50 41
emboss & 10-32 ground screw
Covers
B-52-C1 Blank Flat (1) Hole & (1) Slot
54
WEATHERPROOF BOXES AND COVERS
WEATHERPROOF BOXES AND COVERS
56
WEATHERPROOF BOXES AND COVERS
57
WEATHERPROOF BOXES AND COVERS
Applications
- For use in branch circuit wiring in wet,
damp or dry locations
- May be used as a weatherproof junction box
or as a housing for receptacles, switches
and GFCI’s
B-WPR50-5 B-WPE50-4
B-WPR75-5 B-WPE75-4
Catalog
Weatherproof Blank Number
BC-WPOG
Description
Blank
Color
Steel / Aluminum
Box Covers BC-WPTG Blank Steel / Aluminum
Die Cast Aluminum
Applications
Where weatherproof protection is required
while an outlet is in use.
E-L-2BC E-L-1BC
BC-WPTG BC-WPOG
58
PVC COATED RIGID STEEL CONDUIT
PVC COATED RIGID STEEL CONDUITS AND FITTINGS
60
PVC COATED RIGID STEEL CONDUITS AND FITTINGS
61
PVC COATED RIGID STEEL CONDUITS AND FITTINGS
62
STEEL TUBES & PIPES
64
65
66
67
68
69
70
PROJECT REFERENCE
71
PROJECT REFERENCE
72