Professional Documents
Culture Documents
Honda CRF300L Rally Manual
Honda CRF300L Rally Manual
2021 CRF300LR/LRA
This manual should be considered a permanent part of the vehicle
and should remain with the vehicle when it is resold.
The vehicle pictured in this owner’s manual may not match your
actual vehicle.
Vehicle Safety P. 2
Operation Guide P. 18
Maintenance P. 52
Troubleshooting P. 94
Information P. 107
Specifications P. 132
Vehicle Safety
This section contains important information for safe riding of your vehicle.
Please read this section carefully.
Vehicle Safety
Follow these guidelines to enhance your safety:
focused and free of alcohol and drugs. Check
● Perform all routine and regular inspections
that you and your passenger are both wearing
specified in this manual.
an approved helmet and protective apparel.
● Stop the engine and keep sparks and flame
Instruct your passenger on holding onto the
away before filling the fuel tank.
seat strap or your waist, leaning with you in
● Do not run the engine in enclosed or partly
turns, and keeping their feet on the footpegs,
enclosed areas. Carbon monoxide in
even when the vehicle is stopped.
exhaust gases is toxic and can kill you.
Take Time to Learn & Practice
Always Wear a Helmet
Even if you have ridden other vehicles, practice
It's a proven fact: helmets and protective
riding in a safe area to become familiar with
apparel significantly reduce the number and
how this vehicle works and handles, and to
severity of head and other injuries. So always
become accustomed to the vehicle's size and
wear an approved helmet and protective
weight.
apparel. 2 P. 9
We recommend that all riders take a certified
course approved by the Motorcycle Safety
Foundation (MSF) or a state approved training
course. New riders should start with the basic
course, and even experienced riders will find the
advanced course beneficial.
Continued 3
Safety Guidelines
For information about the MSF training course Make Yourself Easy to See
nearest you, call the national toll-free number:
Make yourself more visible, especially at night,
Vehicle Safety
(800) 446-9227.
by wearing bright reflective clothing, positioning
yourself so other drivers can see you, signaling
USA Other riding tips can be found in the You
before turning or changing lanes, and using
and Your Motorcycle Riding Tips booklet that
your horn when necessary.
came with your vehicle.
Developing off-road riding skill is a gradual Be Alert for Off-road Hazards
step-by step process. Start by practicing at low The terrain can be present a variety of
speeds in a safe area and slowly build your challenges when you ride off-road.
skills. Continually “read” the terrain for unexpected
Ask your dealer if there are off-road riding turns, drop-offs, rocks, ruts and other hazards.
groups in your area where you can learn from Always keep your speed low enough to allow
experienced riders. Also be sure to read Tips & time to see and react to hazards.
Practice Guide for the Off-Highway Motorcyclist
that came with your new vehicle. Ride within Your Limits
Ride Defensively Never ride beyond your personal abilities or
faster than conditions warrant. Fatigue and
Always pay attention to other vehicles around inattention can impair your ability to use good
you, and do not assume that other drivers see judgment and ride safely.
you. Be prepared to stop quickly or perform an
evasive maneuver.
4
Safety Guidelines
Don't Drink or Use Drugs and Ride If You are Involved in a Crash
Alcohol or drugs and riding don't mix. Even one Personal safety is your first priority. If you or
Vehicle Safety
alcoholic drink can reduce your ability to anyone else has been injured, take time to
respond to changing conditions, and your assess the severity of the injuries and whether it
reaction time gets worse with every additional is safe to continue riding. Call for emergency
drink. The same is true for drug use. Don't drink assistance if needed. Also follow applicable laws
or use and ride, and don't let your friends do it and regulations if another person or vehicle is
either. involved in the crash.
Keep Your Honda in Safe Condition If you decide to continue riding, first turn the
It's important to keep your vehicle properly ignition switch to the OFF position, and evaluate
maintained and in safe riding condition. the condition of your vehicle. Inspect for fluid
Having a breakdown can be difficult, especially leaks, check the tightness of critical nuts and
if you are stranded off-road far from your base. bolts, and check the handlebar, control levers,
Inspect your vehicle before every ride and brakes, and wheels. Ride slowly and cautiously.
perform all recommended maintenance. Never
exceed load limits (2 P. 17), and do not modify Your vehicle may have suffered damage that is
your vehicle or install accessories that would not immediately apparent. Have your vehicle
make your vehicle unsafe (2 P. 15). thoroughly checked at a qualified service facility
as soon as possible.
Continued 5
Safety Guidelines
6
Safety Labels
Vehicle Safety
Safety and information labels on your vehicle If a label comes off or becomes hard to read,
provide important safety information and may contact your dealer for a replacement.
warn you of potential hazards that could cause
Continued 7
Safety Labels
Canada
8
Safety Precautions
Vehicle Safety
● Ride cautiously and keep your hands on the visibility, and correct size for your head
handlebar and feet on the footpegs. ● Must fit comfortably but securely, with the
● Keep passenger's hands onto the seat strap chin strap fastened.
or your waist, passenger's feet on the ● Face shield with unobstructed field of vision
footpegs while riding. or other approved eye protection
● Always consider the safety of your USA Look for a DOT (Department of
passenger, as well as other drivers and Transportation) certification label on any helmet
riders. you buy.
Protective Apparel 3WARNING
Make sure that you and any passenger are Not wearing a helmet increases the
wearing an approved helmet, eye protection, chance of serious injury or death in a
and high-visibility protective clothing. Avoid crash.
wearing loose clothes that could get caught on
any part of the vehicle. Ride defensively in
Make sure that you and any passenger
response to weather and road conditions.
always wear an approved helmet and
protective apparel.
Continued 9
Safety Precautions
10
Riding Precautions
Vehicle Safety
Break-in Period surfaces and braking distances are
longer.
During the first 300 miles (500 km) of running,
● Avoid continuous braking.
follow these guidelines to ensure your vehicle's
u Repeated braking, such as when
future reliability and performance.
descending long, steep slopes can
● Avoid full-throttle starts and rapid
seriously overheat the brakes, reducing
acceleration.
their effectiveness. Use engine braking
● Avoid hard braking and rapid down-shifts.
with intermittent use of the brakes to
● Ride conservatively.
reduce speed.
Brakes ● For full braking effectiveness, operate both
the front and rear brakes together.
Observe the following guidelines:
● Avoid excessively hard braking and
downshifting.
u Sudden braking can reduce the vehicle's
stability.
u Where possible, reduce speed before
turning; otherwise you risk sliding out.
Continued 11
Riding Precautions
This model is equipped with an Anti-lock Brake when you release the throttle. For further
System (ABS) designed to help prevent the slowing action, downshift to a lower gear. Use
brakes from locking up during hard braking. engine braking with intermittent use of the
● ABS does not reduce braking distance. In brakes to reduce speed when descending long,
certain circumstances, ABS may result in a steep slopes.
longer stopping distance.
● ABS does not function at speeds below 6
# Wet or Rainy Conditions
Road surfaces are slippery when wet, and wet
mph (10 km/h).
brakes further reduce braking efficiency.
● The brake lever and pedal may recoil slightly
Exercise extra caution when braking in wet
when applying the brakes. This is normal.
conditions.
● Always use the recommended front/rear
If the brakes get wet, apply the brakes while
tires and sprockets to ensure correct ABS
riding at low speed to help them dry.
operation.
12
Riding Precautions
Vehicle Safety
● If you must park on a slight incline or loose 2. Push the side stand down.
surface, park so that the vehicle cannot 3. Slowly lean the vehicle to the left until its
move or fall over. weight rests on the side stand.
● Make sure that high-temperature parts 4. Turn the handlebar fully to the left.
cannot come into contact with flammable u Turning the handlebar to the right
materials. reduces stability and may cause the
● Do not touch the engine, muffler, brakes vehicle to fall.
and other high-temperature parts until they 5. Turn the ignition switch to the LOCK
cool down. position and remove the key. 2 P. 44
● To reduce the likelihood of theft, always lock
the handlebar and remove the key when
leaving the vehicle unattended.
Use of an anti-theft device is also
recommended.
Continued 13
Riding Precautions
14
Accessories & Modifications
Vehicle Safety
Improper accessories or modifications
We strongly advise that you do not add any can cause a crash in which you can be
accessories that were not specifically designed seriously hurt or killed.
or approved for your vehicle by Honda or make
modifications to your vehicle from its original Follow all instructions in this owner's
design. Doing so can make it unsafe. manual regarding accessories and
Modifying your vehicle may also void your modifications.
warranty and make your vehicle illegal to
operate on public roads. Before deciding to Do not pull a trailer with, or attach a sidecar to,
install accessories on your vehicle, be certain your vehicle. Your vehicle was not designed for
the modification is safe and legal. these attachments, and their use can seriously
impair your vehicle's handling.
15
Off-Road Safety
Learn to ride in an uncongested off-road area Remember that excessive noise bothers
free of obstacles before venturing onto everyone and creates a bad image for
unfamiliar terrain. motorcycling.
● Always obey local off-road riding laws and
regulations.
● Obtain permission to ride on private
property. Avoid posted areas and obey “NO
Trespassing” signs.
● Ride with a friend on another vehicle so that
you can assist each other in case of trouble.
● Familiarity with your vehicle is critically
important should a problem occur far from
help.
● Never ride beyond your ability and
experience or faster than conditions warrant.
● If you are not familiar with the terrain, ride
cautiously. Hidden rocks, holes, or ravines
could spell disaster.
16
Loading
Vehicle Safety
● Carrying extra weight affects your vehicle's ● Do not carry a passenger.
handling, braking and stability. ● Keep cargo small and light weight.
Always ride at a safe speed for the load you Make sure it cannot easily be caught on
are carrying. brush or other objects, and that it does not
● Avoid carrying an excessive load and keep interfere with your ability to shift position to
within specified load limits. maintain balance and stability.
Maximum weight capacity 2 P. 132
● Tie all luggage securely, evenly balanced
and close to the center of the vehicle. 3WARNING
● Do not place objects near the lights or the Overloading or improper loading can
muffler. cause a crash and you can be seriously
hurt or killed.
17
Parts Location
Spark arrester (P.77)
Throttle grip (P.93)
Operation Guide
18
Clutch lever (P.90)
Coolant reserve tank (P.81)
Fuel fill cap (P.49)
Seat (P.74)
Operation Guide
Fuse box A (P.103)
Helmet holder (P.50)
Fuse box B (P.105)
Left shroud Battery (P.72)
(P.75) Main fuse (P.104)
19
Instruments
Tachometer
NOTICE
Operation Guide
SEL button
SET button
Display Check
When the ignition switch is turned to the ON position, all the mode and digital
segments will show. If any part of these displays does not come on when it should,
have your dealer check for problems.
20
Clock (12-hour display)
To set the clock: (P.30)
Odometer [TOTAL] & Tripmeter
Operation Guide
[TRIP A/B] & Stopwatch (P.22)
Gear position indicator
The gear position is shown in the gear
position indicator.
u “-” appears when the transmission is
not shifted properly.
Speedometer
Average fuel mileage [AVG] , Fuel consumption and
Average speed [AVG] (P.26)
Fuel gauge
Remaining fuel when only 1st (E) segment starts flashing:
approximately 0.58 US gal (2.2 L)
If the fuel gauge indicator flashes in a repeat pattern or turns off:
(P.98)
Continued 21
Instruments (Continued)
Odometer [TOTAL] & Tripmeter [TRIP A/B] & Stopwatch
The SEL button switches between the odometer, tripmeter A, tripmeter B, and stopwatch.
Stopwatch
22
# Odometer [TOTAL] # Stopwatch
Total distance ridden. When “------” is Shows elapsed time since the SET button
displayed, go to your dealer for service. was pushed to start the measurement.
Operation Guide
Display range:
# Tripmeter [TRIP A/B] 0H00M00.0S - 9H59M59.9S
Distance ridden since tripmeter was reset. • Above 9H59M59.9S back to 0H00M00.0S
When “----.-” is displayed, go to your dealer To use the stopwatch: (P.25)
for service.
To reset the tripmeter: (P.24)
Continued 23
Instruments (Continued)
# To reset the tripmeter [TRIP A/B], To reset the tripmeter B, average fuel
average fuel mileage [AVG], fuel mileage B, fuel consumption B and average
consumption and average speed [AVG] speed B (these are based on tripmeter B)
Operation Guide
To reset the tripmeter A, average fuel together, press and hold the SEL button
mileage A, fuel consumption A and average while tripmeter B is displayed.
speed A (these are based on tripmeter A) Average fuel Fuel Average
together, press and hold the SEL button mileage B consumption B speed B
while tripmeter A is displayed.
Average fuel Fuel Average or or
mileage A consumption A speed A
Tripmeter B
or or
or or
Tripmeter A
or or
24
Stopwatch # To Restart the Measurement
Press the SET button again. The stopwatch
# To Measure the Time restarts measurement.
1. Select the stopwatch. (P.22)
Operation Guide
2. To start measurement, press the SET # To Reset the Measured value
button. Press and hold the SEL button when the
u The measurement keeps going, if you stopwatch is displayed and also the
change an item while measuring. measurement is finished.
3. To finish measurement, press the SET
button.
u The measurement can also be finished
by turning the ignition switch to the
OFF position.
SEL button
26
# Average fuel mileage [AVG] When “---.-” is displayed except for the
Displays the average fuel mileage since the above-mentioned cases, go to your dealer
selected tripmeter was reset. for service.
To reset the average fuel mileage:
Operation Guide
The average fuel mileage will be calculated
based on value displayed on the tripmeter (A (P.24)
or B) selected.
Also, the average fuel mileage for tripmeter
A will be displayed when the odometer,
tripmeter A, and stopwatch are selected.
Display range:
50 STATE (meets California) 0.0 to 299.9
mile/gal (km/L or L/100km)
Canada 0.0 to 299.9 km/L (L/100km, mile/gal
or mile/L)
• More than 299.9 : “299.9” is displayed.
• When the tripmeter A or B is reset: “---.-”
is displayed.
Continued 27
Instruments (Continued)
# Fuel consumption # Average speed [AVG]
Displays the fuel consumption since the Displays the average speed since the selected
selected tripmeter was reset. tripmeter was reset.
The average speed will be calculated based on
Operation Guide
Operation Guide
• Clock setting
• Backlight brightness adjustment
• Changing the speed and mileage unit
• Changing the fuel mileage meter unit
Setting Mode B
Following items can be changed sequentially. (P.33)
• Setting of REV indicator
(lighting RPM setting, lighting interval RPM setting and brightness adjustment)
• Setting display mode of tachometer
Continued 29
Instruments (Continued)
Setting Mode A 1 Clock setting:
If the SET button is not pressed for about 30 a Turn the ignition switch to the ON position.
seconds, the control is automatically switched b Press and hold the SEL and the SET
buttons until the hour digits start flashing.
Operation Guide
30
e Press the SEL button until the desired 2 Backlight brightness adjustment:
minute is displayed. You can adjust the brightness to one of five
u Press and hold the SEL button to levels.
advance the minute fast.
Operation Guide
a Press SEL button. The brightness is
switched.
Continued 31
Instruments (Continued)
3 Changing the speed and mileage unit: 4 Changing the fuel mileage meter unit:
a Press SEL button to select either "mph" and a When the “km/h” for speed and “km” for
mileage are selected
"mile" or "km/h" and "km".
Press SEL button to select “L/100km” or
Operation Guide
“km/L”.
Canada only
When the “mph” for speed and “mile” for
mileage are selected
b Press SET button. The speed and mileage Press SEL button to select “mile/L” or
unit is set, and then the display moves to the “mile/gal”.
changing the fuel mileage meter unit. u When "mile/gal" is selected, the unit of
the fuel consumption is changed to "gal".
b Press SET button. The fuel mileage meter
unit is set, and then the display moves to the
ordinary display.
32
Setting Mode B 1 Setting of REV indicator:
If the SET button is not pressed for about 30 You can change the setting of the REV
seconds, the control is automatically switched indicator.
from the setting mode to the ordinary REV indicator is blinking while setting.
Operation Guide
display. SEL button REV indicator
Continued 33
Instruments (Continued)
a To change the setting mode B, turn the b Each time SEL button is pressed, the
ignition switch to the ON position while lighting RPM set value increase by
pressing SEL button until the display check 250 r/min (rpm) (one segment). When the
is finished. The blinking of bar segment in set value exceeds the allowable range, the
Operation Guide
the tachometer shows the currently applied RPM set value automatically returns to
REV indicator lighting RPM, and the 4,000 r/min (rpm).
numerical tachometer display shows it. u Press and hold the SEL button to
u Tachometer bar segment is displayed as advance the REV indicator lighting
conventional display, regardless of set up setting value fast.
display method.
Available Setting Range
4,000 r/min (rpm) -to- 10,500 r/min (rpm)
34
c Press SET button. The REV indicator lighting
RPM is set, and then the display moves to
the setting of REV indicator lighting interval
RPM.
Operation Guide
At the same time, the blinking bar Tachometer
segment shows the currently applied
setting originated from the REV indicator
lighting RPM and the numerical Numerical tachometer
tachometer display shows the REV display
indicator lighting interval RPM.
d Each time SEL button is pressed, the
number of REV indicator lighting interval
RPM is switched among 0 r/min (rpm),
250 r/min (rpm) and 500 r/min (rpm) in this
order.
Continued 35
Instruments (Continued)
Ex When REV indicator lighting RPM is e Press SET button. The REV indicator lighting
setting 8,000 r/min (rpm) and REV interval RPM is set, and then the display
indicator lighting interval RPM is moves to the brightness adjustment of the
REV indicator.
Operation Guide
36
2 Changing of tachometer display Ex Engine revolutions per minutes
mode: 10,500 r/min (rpm)
You can change the display mode of the Conventional Tachometer bar
tachometer. display segment
Operation Guide
a Press SEL button to switch the display
mode of tachometer.
b Press SET button. The currently selected
displaying mode is set, and the control
returns to the ordinary display.
Peak hold
Conventional display display
Shows the engine RPM on the tachometer
bar segment.
37
Indicators
If one of these indicators does not come on when it should, have your dealer
check for problems.
38
High coolant temperature indicator
REV indicator (P.57)
Comes on briefly when the ignition switch
High beam indicator is turned to the ON position.
Operation Guide
If it comes on while running: (P.96)
Continued 39
Indicators (Continued)
REV Indicator
• Comes on briefly when the ignition switch
is turned to the ON position.
Operation Guide
Initial setting
blinking RPM: 8,000 r/min (rpm)
interval RPM: 250 r/min (rpm)
REV indicator r/min (rpm)
Blinking
7,250 r/min (rpm)
(2 times/second)
Blinking
7,500 r/min (rpm)
(5 times/second)
Blinking
7,750 r/min (rpm)
(10 times/second)
Lighting 8,000 r/min (rpm)
40
Operation Guide
41
Switches
Operation Guide
Horn button
42
ON
Ignition Switch Turns electrical system
Switches the electrical system on/off, locks on for starting/riding.
the steering. OFF
Operation Guide
u Key can be removed when in the OFF or Turns engine off.
LOCK position.
Steering Lock: (P.44) LOCK
Locks steering.
Start button
Hazard switch
Switchable when the ignition switch is turned to the ON position.
Continued 43
Switches (Continued)
Steering Lock # Locking
Lock the steering when parking to help a Turn the handlebar all the way to the left.
prevent theft. b Push the key down, and turn the ignition
Operation Guide
Turn
Ignition key
44
ABS function on the rear wheel
CRF300LRA To turn on the ABS function on both
The ABS function on the rear wheel can be wheels
optionally turned off for off-road riding. a Stop the vehicle.
b Press and hold the rear ABS switch until the
Operation Guide
u Each time the ignition switch is turned to the
ON position, the ABS function on both rear ABS OFF indicator is turned off, or turn
wheels will automatically be turned on. the ignition switch to the OFF position and
the ON position.
To turn off the ABS function on the rear
wheel
a Stop the vehicle.
b Press and hold the rear ABS switch until the
rear ABS OFF indicator starts flashing, then
ABS function on ABS function on
release the switch while the indicator is
flashing. both wheels is on. rear wheel is off.
u The rear ABS OFF indicator is on, when
the ABS function on the rear wheel is
Rear ABS
turned off.
switch
u The ABS function on the rear wheel
remains on, if the switch is released after
indicator stops flashing.
45
Starting the Engine
Start your engine using the following procedure, a Make sure the engine stop switch is in the
regardless of whether the engine is cold or warm. (Run) position.
b Turn the ignition switch to the ON position.
c Shift the transmission to Neutral ( N
Operation Guide
46
If the engine does not start:
a Open the throttle fully and press the start
button for 5 seconds.
Operation Guide
b Repeat the normal starting procedure.
c If the engine starts, open the throttle slightly
if idling is unstable.
d If the engine does not start, wait 10 seconds
before trying steps a & b again.
47
Shifting Gears
Your vehicle transmission has 6 forward # Recommended Shift Points
gears in a one-down, five-up shift pattern. Shifting Up
From 1st to 2nd 12 mph (20 km/h)
Operation Guide
Shifting Down
N From 6th to 5th 28 mph (45 km/h)
From 5th to 4th 22 mph (35 km/h)
1 From 4th to 3rd 16 mph (25 km/h)
48
Refueling
Ignition key Opening the Fuel Fill Cap
Lock cover
Open the lock cover, insert the ignition key,
Level plate and turn it clockwise to open the fuel fill cap.
Operation Guide
Closing the Fuel Fill Cap
a After refueling, push the fuel fill cap closed
until it locks.
b Remove the key and close the lock cover.
u The key cannot be removed if the fuel fill
cap is not locked.
Fuel fill cap
Do not fill with fuel above the level plate. 3WARNING
Fuel type: Unleaded gasoline only Gasoline is highly flammable and
Recommended fuel octane number: explosive. You can be burned or
Pump Octane Number (PON) 86 or higher. seriously injured when handling fuel.
Tank capacity: 3.38 US gal (12.8 L)
• Stop the engine, and keep heat,
sparks, and flame away.
# Refueling and Fuel Guidelines (P.14) • Handle fuel only outdoors.
• Wipe up spills immediately.
49
Storage Equipment
Helmet Holder # Unlocking
The helmet holder is located on the left side Open the lock cover, insert the ignition key
of the vehicle. and turn it counterclockwise.
Operation Guide
Pin # Locking
a Hang your helmet on the holder pin and
Helmet
push it in to lock.
holder
b Remove the key and close the lock cover.
Ignition u Use the helmet holder only when parked.
Lock cover key
3WARNING
Riding with a helmet attached to the
holder can interfere with the rear wheel
or suspension and could cause a crash
in which you can be seriously hurt or
killed.
50
Document Bag and Tool Kit Tool box Document bag
The document bag and tool kit are stored in
the tool box located on the left side of the Lock
vehicle. position
Operation Guide
# Open
Insert the ignition key and turn it clockwise to
open the tool box.
# Close Ignition
Close the tool box and push the lock key Lock position
positions until it is firmly closed. Remove the
ignition key. Tool box Lock position
u Make sure the tool box is closed before Lock
riding. position
u As shown in the illustration, wrap the tool kit
with a sponge and store it in the tool box.
Ignition
key
Sponge Tool kit
51
Maintenance
Maintenance
pollution. Maintenance is the owner's
responsibility. Be sure to inspect your vehicle USA
before each ride, and perform the periodic
Maintenance, replacement or repair of the
checks specified in the Maintenance Schedule.
emission control devices and systems may
2 P. 55
be performed by any vehicle repair
3WARNING establishment or individual using parts
that are “certified” to EPA standards.
Improperly maintaining your vehicle or
failing to correct a problem before you
ride can cause a crash in which you can
be seriously hurt or killed.
53
Importance of Maintenance
Maintenance Safety
Always read the maintenance instructions
before you begin each task, and make sure that
you have the tools, parts, and skills required.
We cannot warn you of every conceivable
Maintenance
54
Maintenance Schedule
The maintenance schedule specifies the Make sure whoever performs the scheduled
maintenance requirements necessary to ensure maintenance completes the maintenance
safe, dependable performance, and proper record. Retain all service documents. If you sell
emission control. your vehicle, these service documents should
be transferred with the vehicle to the new
Maintenance work should be performed in owner.
Maintenance
accordance with Honda's standards and
specifications by properly trained and equipped
technicians. Your dealer meets all of these
requirements. All scheduled maintenance is
considered a normal owner operating cost and
will be charged to you by your dealer. Keeping
an accurate maintenance record will help
ensure your vehicle is properly maintained.
2 P. 58
Continued 55
Maintenance Schedule
Frequency*1
Regular Refer to
Items × 1,000 mi 0.6 4 8 12 16 20 24 Replace page
× 1,000 km 1.0 6.4 12.8 19.2 25.6 32.0 38.4
Fuel Line –
Throttle Operation 93
Air Cleaner*2 –
Maintenance
Crankcase Breather*3 –
Emission-related Items
Spark Plug Every 16,000 mi (25,600 km): Every 32,000 mi (51,200 km): –
Valve Clearance –
Engine Oil 1 Year –
Engine Oil Filter –
Engine Idle Speed –
Radiator Coolant*7 3 Years 81
Cooling System –
Secondary Air Supply System –
Evaporative Emission Control System*4 –
56
Maintenance Schedule
Frequency*1
Regular Refer to
Items × 1,000 mi 0.6 4 8 12 16 20 24 Replace page
× 1,000 km 1.0 6.4 12.8 19.2 25.6 32.0 38.4
Drive Chain*5 Every 600 mi (1,000 km): 87
Drive Chain Slider –
Brake Fluid*7 2 Years 83
Maintenance
Brake Pads Wear 84
Non-Emission-Related Items
Brake System 59
Brake light Switch 85
Headlight Aim –
Clutch System 90
Side Stand 86
Suspension –
Spark Arrester*6 77
Nuts, Bolts, Fasteners*5 –
Wheels/Tires*5 69, 89
Steering Head Bearings –
Notes:
*1 : At higher odometer reading, repeat at the *4 : 50 STATE (meets California)
frequency interval established here. *5 : Service more frequently when riding OFF-ROAD.
*2 : Service more frequently when riding in unusually *6 : USA only.
throttle.
57
Maintenance Record
58
Maintenance Fundamentals
Maintenance
because having a breakdown, or even a flat tire,
Check the following items after you get on your
can be a major inconvenience.
vehicle:
● Throttle action moves smoothly without
Before riding on-road, or returning to
binding. 2 P. 93
pavement after riding off-road, take a few
● Brake lever and pedal operate normally.
moments to walk around your vehicle and look
● Check the fuel level and refuel when
for any loose parts or anything that appears
needed. 2 P. 14, 2 P. 49
unusual.
● Engine stop switch functions properly.
Also check the following.
2 P. 43
● Tire tread wear and air pressures are within
limits. 2 P. 69
● Lights, horn, and turn signals operate
normally.
● Check the condition of the drive chain.
Adjust slack and lubricate as needed. 2 P. 67
Continued 59
Maintenance Fundamentals
Check the following items at regular intervals: Before riding off-road check all of the preceding
● Oil level is between the upper and lower plus the following:
level marks. 2 P. 79 ● Make sure spokes are tight. Check the rims
● Brake fluid level is for any damage. 2 P. 89
Front: above the LOWER level mark. 2 P. 83 ● Oil level is between the upper and lower
Rear: above the LWR level mark. 2 P. 83 marks. 2 P. 79
Maintenance
● Engine coolant level is between the UPPER ● Check the fuel level and refuel when
and LOWER level marks. 2 P. 81 needed. 2 P. 14, 2 P. 49
● Side stand functions properly. 2 P. 86 ● Be sure the fuel fill cap is securely fastened.
2 P. 49
● Clutch lever operates smoothly. Adjust
freeplay if necessary. 2 P. 90
● Check for loose cables and other parts, and
anything that appears abnormal.
● Use a wrench to check the tightness of all
accessible nuts, bolts and fasteners.
60
Maintenance Fundamentals
Maintenance
Check the air pressure (2 P. 69), examine tread for wear and damage
Tires and wheels
(2 P. 69), and check the wheels for damage.
Check the engine oil level (2 P. 79), engine coolant level (2 P. 81), and
Fluid levels
brake fluid level (2 P. 83).
Check that the headlight, brake light, taillight, turn signals and license plate
Lights
light are working properly.
Controls Check the freeplay of the clutch lever (2 P. 90) and throttle grip (2 P. 93).
Check the slack (2 P. 87), adjust the slack, and lubricate (2 P. 68) as
Drive chain
needed.
Fuses Check that you have a full supply of spare fuses.
Nuts & bolts Check the major nuts and bolts, and tighten as needed.
Service the crankcase breather more frequently if your vehicle is ridden in
Crankcase Breather the rain or often at full throttle. Service the breather if you can see
deposits in the transparent section of the drain tube.
61
Maintenance Fundamentals
62
Maintenance Fundamentals
Maintenance
corroded.
Do not remove the battery cap seals. There is 3WARNING
no need to remove the cap when charging. The battery gives off explosive
NOTICE hydrogen gas during normal operation.
An improperly disposed of battery can be
harmful to the environment and human health. A spark or flame can cause the battery
Always confirm local regulations for proper
to explode with enough force to kill or
battery disposal instruction.
seriously hurt you.
# What to do in an emergency
If any of the following occur, immediately see Wear protective clothing and a face
your doctor. shield, or have a skilled mechanic do
● Electrolyte splashes into your eyes: the battery servicing.
u Wash your eyes repeatedly with cool
water for at least 15 minutes. Using water WARNING: Battery posts, terminals, and related
under pressure can damage your eyes. accessories contain lead and lead compounds.
Wash your hands after handling.
Continued 63
Maintenance Fundamentals
and polish the terminals with a wire brush or dealer. Read the information that came with
sandpaper. Wear safety glasses. your battery charger and follow the instructions
on the battery. Avoid using an automobile-type
battery charger, as these can overheat a
motorcycle battery and cause permanent
damage.
Make sure the ignition switch is in the OFF
position before charging the battery.
NOTICE
Improper charging can damage the battery. If
4. After cleaning, reinstall the battery.
you can’t charge the battery or it appears unable
to hold a charge, contact your dealer.
The battery has a limited life span. Consult your
dealer about when you should replace the
battery. Always replace the battery with another
maintenance-free battery of the same type.
64
Maintenance Fundamentals
Maintenance
NOTICE
Installing non-Honda electrical accessories can NOTICE
overload the electrical system, discharging the Replacing a fuse with one that has a higher rating greatly
battery and possibly damaging the system. increases the chance of damage to the electrical system.
65
Maintenance Fundamentals
66
Maintenance Fundamentals
Maintenance
possible. acceleration. 2 P. 87
NOTICE
If the chain does not move smoothly, makes
Brake fluid can damage plastic and painted surfaces. strange noises, has damaged rollers, has loose
Wipe up spills immediately and wash thoroughly. pins, has missing O-rings, or kinks, have the
chain inspected by your dealer.
Recommended brake fluid:
Honda DOT 3 or DOT 4 Brake Fluid or Also inspect the drive sprocket and driven
equivalent sprocket. If either has worn or damaged teeth,
have the sprocket replaced by your dealer.
3WARNING
Clean filler cap before removing. Use
only DOT 3 or DOT 4 fluid from a
sealed container. Normal Worn Damaged
(GOOD) (REPLACE) (REPLACE)
Continued 67
Maintenance Fundamentals
sprockets while rotating the rear wheel. Use a Avoid getting lubricant on the brakes or tires.
dry cloth with chain cleaner designed Avoid applying excess chain lubricant to prevent
specifically for O-ring chains, or neutral spray onto your clothes and the vehicle.
detergent. Use a soft brush if the chain is dirty.
After cleaning, wipe dry and lubricate with the
recommended lubricant. Recommended Coolant
Recommended lubricant: Pro Honda HP Coolant is a pre-mixed solution
Pro Honda HP Chain Lube or equivalent of antifreeze and distilled water.
Concentration:
50% antifreeze and 50% distilled water
A concentration of antifreeze below 40% will
not provide proper corrosion and cold
temperature protection.
A concentration of up to 60% will provide better
protection in colder climates.
68
Maintenance Fundamentals
Maintenance
Crankcase Breather
changes a little at a time.
Service more frequently when riding in rain, at
full throttle, or after the vehicle is washed or # Inspecting for Damage
overturned. Service if the deposit level can be
Inspect the tires for
seen in the transparent section of the drain
cuts, slits, or cracks that
tube.
exposes fabric or
If the drain tube overflows, the air filter may
cords, or nails or other
become contaminated with engine oil causing
foreign objects
poor engine performance.
embedded in the side
of the tire or the tread.
Tires (Inspecting/Replacing) Also inspect for any unusual bumps or bulges in
the side walls of the tires.
# Checking the Air Pressure
Visually inspect your tires and use an air
pressure gauge to measure the air pressure
before each off-road ride and whenever you
return to pavement after riding off-road. If you
Continued 69
Maintenance Fundamentals
3WARNING
# Inspecting Tread Depth Riding on tires that are excessively worn
Inspect the tread wear indicators. If they or improperly inflated can cause a crash
become visible, replace the tires immediately. in which you can be seriously hurt or
For safe riding, you should replace the tires killed.
when the minimum tread depth is reached.
Follow all instructions in this owner's
manual regarding tire inflation and
maintenance.
or TWI
Wear indicator
location mark
70
Maintenance Fundamentals
Maintenance
● Use the recommended tires or equivalents
of the same size, construction, speed rating,
and load range.
● Remember to replace the inner tube
whenever you replace a tire. The old tube
will probably be stretched, and it could fail if
installed in a new tire.
3WARNING
Installing improper tires on your vehicle
can adversely affect handling and
stability, and can cause a crash in which
you can be seriously hurt or killed.
# Installation
Positive Install the parts in the reverse order of
terminal removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
Battery
holder are tight.
Battery Make sure the clock information is correct
Bolt after the battery is reconnected. 2 P. 30
For proper handling of the battery, see
# Removal “Maintenance Fundamentals.” 2 P. 63
“Battery Goes Dead.” 2 P. 100
Make sure the ignition switch is in the OFF
position.
1. Remove the left shroud. 2 P. 75
72
Removing & Installing Body Components u Clip
Clip
# Removal
1. Press down on the center pin to release
the lock.
Maintenance
2. Pull the clip out of the hole.
Center pin
# Installation
1. Push the bottom of the center pin.
73
Removing & Installing Body Components u Seat
Seat # Removal
1. Remove the hook bolts and collars.
Rear prongs 2. Pull the seat back and up.
Seat
Collar
Hook bolt # Installation
Maintenance
Tab
Front prongs Rear stays Hook bolt
74
Removing & Installing Body Components u Left Shroud
Maintenance
band. 3. Install the clips.
3. Remove the clips. 2 P. 73 4. Attach the harness to the harness band.
4. Remove the bolts and washers. 5. Install the left side cover. 2 P. 76
5. Remove the tabs from the slits.
6. Remove the left shroud.
Bolts Harness
Clips
Bolts
Bolts
Washers
Slits Tabs
75
Removing & Installing Body Components u Side Cover
# Installation
Install the parts in the reverse order of
Clip removal.
Bolt
Side cover
76
Spark Arrester
Maintenance
regular maintenance to assure proper
function. The spark arrester prevents random
sparks from the combustion process in your
engine from reaching the environment.
Continued 77
Spark Arrester u Cleaning the Spark Arrester
5. Remove the spark arrester mounting 7. Install the gasket and the spark arrester,
bolts, spark arrester and gasket from the and tighten the spark arrester mounting
muffler. bolts.
6. Use a brush to remove carbon deposits
Torque: 6.6 lbf·ft (9.0 N·m, 0.9 kgf·m)
from the spark arrester screen. Be careful
Maintenance
to avoid damaging the spark arrester 8. Install the tail cap cover and tighten the
screen. The spark arrester must be free of tail cap cover screws.
breaks and holes. Replace, if necessary.
Check the gasket. Replace, if necessary. Torque: 3.9 lbf·ft (5.25 N·m, 0.5 kgf·m)
78
Engine Oil
Maintenance
position and wait for 2 to 3 minutes. mark
3. Place your vehicle in an upright position
on a firm, level surface.
4. Check that the oil level is between the
upper level and lower level marks on the Lower level
oil level inspection window. mark
Oil fill cap
79
Engine Oil u Adding Engine Oil
1. Remove the oil fill cap. Add the For the recommended oil and oil selection
recommended oil until it reaches the guidelines, see “Maintenance Fundamentals.”
upper level mark. 2 P. 66
u Place your vehicle in an upright
position on a firm, level surface when
checking the oil level.
u Do not overfill above the upper level
mark.
u Make sure no foreign objects enter the
oil filler opening.
u Wipe up any spills immediately.
2. Securely reinstall the oil fill cap.
80
Coolant
Maintenance
1. Place your vehicle on a firm, level surface.
2. Hold your vehicle in an upright position.
3. Check that the coolant level is between
the UPPER level and LOWER level marks
on the reserve tank.
81
Coolant u Adding Coolant
level mark.
Always let the engine and radiator cool
Add fluid only from the reserve tank cap and
down before removing the radiator cap.
do not remove the radiator cap.
1. Remove the reserve tank cap and add
fluid while monitoring the coolant level.
u Do not overfill above the UPPER level
mark.
u Make sure no foreign objects enter the
reserve tank opening.
2. Securely reinstall the reserve tank cap.
82
Brakes
Maintenance
is horizontal and that the fluid level is likely have a leak. Have your vehicle
above the LOWER level mark. inspected by your dealer.
Rear Check that the brake fluid reservoir
is horizontal and that the fluid level is
above the LWR mark.
Front Front brake fluid reservoir Rear Rear brake fluid reservoir
LWR mark
Inspecting the Brake Pads 1. Front Inspect the brake pads from below
the brake caliper.
Check the condition of the brake pad wear 2. Rear Inspect the brake pads from the rear
indicators. right of the vehicle.
The pads need to be replaced if a brake pad If necessary have the pads replaced by your
Maintenance
Disc Disc
84
Brakes u Adjusting the Brake Light Switch
Maintenance
adjusting nut in the direction A if the switch
operates too late, or turn the nut in the
direction B if the switch operates too soon.
Brake light switch
A
B
Adjusting nut
85
Side Stand
Checking the Side Stand 4. Start the engine, pull the clutch lever in,
and shift the transmission into gear.
5. Lower the side stand all the way. The
engine should stop as you lower the side
stand. If the engine doesn't stop, have
Maintenance
Side stand
spring
86
Drive Chain
Inspecting the Drive Chain 3. Insert a scale through the slit on the chain
case.
Slack
Check the drive chain slack at several points
along the chain. If the slack is not constant at
Maintenance
all points, some links may be kinked and Slit
binding.
Have the chain inspected by your dealer.
Continued 87
Drive Chain u Inspecting the Drive Chain Slack
4. Pull up the drive chain and check the 5. Roll the vehicle forward and check that
slack between the top of the swingarm the chain moves smoothly.
and the drive chain by the scale. 6. Inspect the sprockets. 2 P. 67
7. Clean and lubricate the drive chain.
Drive chain 2 P. 68
Maintenance
Top of
swingarm
88
Wheels
Maintenance
Excessively loose spokes may result in
instability at high speeds and possible loss of Wheel
control. rim
It is not necessary to remove the wheels to
Spoke
perform the recommended service in the
Maintenance Schedule. 2 P. 99
89
Clutch
Checking the Clutch Check the clutch cable for kinks or signs of
wear. If necessary have it replaced by your
# Checking the Clutch Lever Freeplay dealer.
Check the clutch lever freeplay. Lubricate the clutch cable with a
commercially available cable lubricant to
Maintenance
90
Clutch u Adjusting the Clutch Lever Freeplay
Maintenance
Attempt adjustment with the minor clutch –
cable adjuster first.
Continued 91
Clutch u Adjusting the Clutch Lever Freeplay
92
Throttle
Maintenance
freeplay is correct. If the throttle does not 3. Tighten the lock nut and inspect the
move smoothly, close automatically, or if the throttle action again.
cable is damaged, have the vehicle inspected Throttle grip Adjuster
by your dealer.
Freeplay at the throttle grip flange: –
1/16 - 1/4 in (2 - 6 mm)
Freeplay
+
Flange
Lock nut
93
Troubleshooting
Troubleshooting
● Check that there is gasoline in the fuel ● Make sure engine stop switch is in the
tank. (Run) position. 2 P. 43
● Check if the PGM-FI malfunction indicator ● Check for a blown fuse. 2 P. 103
lamp (MIL) is on. ● Check for a loose battery connection
u If the indicator lamp is on, contact (2 P. 72) or battery terminal corrosion
your dealer as soon as possible. (2 P. 63).
● Check the condition of the battery.
2 P. 100
If the problem continues, have your vehicle
inspected by your dealer.
95
Overheating (High coolant temperature indicator is on)
The engine is overheating when the following If the fan is not operating:
occurs: Suspect a fault. Do not start the engine.
● High coolant temperature indicator Transport your vehicle to your dealer.
comes on. If the fan is operating:
● Acceleration becomes sluggish. Allow the engine to cool with the ignition
If this occurs, pull safely to the side of the switch in the OFF position.
road and perform the following 3. After the engine has cooled, inspect the
Troubleshooting
96
Warning Indicators On or Flashing
Troubleshooting
system. Reduce speed and have your vehicle If the ABS indicator stays on, your brakes will
inspected by your dealer as soon as possible. continue to work as a conventional system,
but without the anti-locking function.
ABS (Anti-lock Brake System)
The ABS indicator may flash if you turn the
Indicator rear wheel while the rear wheel is lifted off
the ground. In this case, turn the ignition
CRF300LRA
switch to the OFF position, and then to the
If the indicator operates in one of the
ON position again. The ABS indicator will go
following ways, you may have a serious
off after your speed reaches 19 mph (30
problem with the ABS. Reduce your speed
km/h).
and have your vehicle inspected by your
dealer as soon as possible.
97
Other Warning Indications
98
Tire Puncture
Repairing a puncture or removing a wheel
3WARNING
requires special tools and technical expertise.
Riding your vehicle with a temporary
We recommend you have this type of service
tire or tube repair can be risky. If the
performed by your dealer.
temporary repair fails, you can crash
After an emergency repair, always have the
and be seriously injured or killed.
tire inspected/replaced by your dealer.
Troubleshooting
Tube Repair and Replacement If you must ride with a temporary tire or
tube repair, ride slowly and carefully
If a tube is punctured or damaged, you and do not exceed 30 mph (50 km/h)
should replace it as soon as possible. A tube until the tire or tube is replaced.
that is repaired may not have the same
reliability as a new one, and it may fail while
you are riding.
If you need to make a temporary repair by
patching a tube or using an aerosol sealant,
ride cautiously at reduced speed and have
the tube replaced before you ride again.
Anytime a tube is replaced, the tire should be
carefully inspected as described.
99
Electrical Trouble
charger, as these can overheat a motorcycle Do not use bulbs other than those specified.
battery and cause permanent damage. If the Check the replacement bulb for correct
battery does not recover after recharging, operation before riding.
contact your dealer.
NOTICE For the light bulb wattage, see
Jump starting using an automobile battery can “Specifications.” 2 P. 134
damage your vehicle's electrical system and is
not recommended.
Bump starting is also not recommended. The headlights, license plate light uses
several LEDs. If there is an LED which is not
turned on, see your dealer for servicing.
100
Electrical Trouble u Burned-out Light Bulb
Troubleshooting
Collar fender
Torque: 15 lbf·ft (21 N·m, 2.1 kgf·m)
Socket Bulb
Collar
Prong
Hook bolt
Grommets Prong
Continued 101
Electrical Trouble u Burned-out Light Bulb
Screw
102
Electrical Trouble u Blown Fuse
Blown Fuse
Before handling fuses, see “Inspecting and
Replacing Fuses.” 2 P. 65
# Fuse Box A
1. Remove the seat. 2 P. 74
Troubleshooting
2. Open the fuse box cover.
3. Pull the fuses out with the fuse puller in Spare fuse
the tool kit one by one check for a blown
Fuse box cover
fuse. Always replace a blown fuse with a
spare of the same rating.
4. Close the fuse box cover.
5. Install the seat.
Continued 103
Electrical Trouble u Blown Fuse
104
Electrical Trouble u Blown Fuse
Troubleshooting
fuse box A. 2 P. 103
4. Close the fuse box cover.
5. Reinstall parts in the reverse order of
Spare removal.
fuse
10 A fuse NOTICE
30 A fuse
If a fuse fails repeatedly, you likely have an
electrical problem. Have your vehicle inspected
by your dealer.
105
Unstable Engine Operation Occurs Intermittently
If the fuel pump filter is clogged, unstable
engine operation will occur intermittently
while riding.
Even if this symptom occurs, you can
continue to ride your vehicle.
If unstable engine operation occurs even if
sufficient fuel is available, have your vehicle
Troubleshooting
106
Information
Keys..................................................................... P. 108
Instruments, Controls, & Other Features... P. 109
Caring for Your Vehicle.................................. P. 110
Storing Your Vehicle....................................... P. 114
Transporting Your Vehicle ............................ P. 115
You & the Environment ................................. P. 116
Vehicle Identification Number..................... P. 117
Emission Control Systems ............................. P. 118
Catalytic Converter ......................................... P. 122
Oxygenated Fuels............................................ P. 123
Authorized Manuals ....................................... P. 124
Warranty Coverage and Service .................. P. 125
Honda Contacts ............................................... P. 128
Reporting Safety Defects .............................. P. 130
Keys
Keys
Ignition Key
Be sure to record the key number provided with
the key number plate. Store the spare key and
key number in a safe location.
To make a duplicate, take the spare key or the
key number to your dealer.
If you lose all ignition keys and the key number,
Information
108
Instruments, Controls, & Other Features
Information
Ignition Cut-off System
Do not use the engine stop switch except in an
A banking (lean angle) sensor automatically
emergency. Doing so when riding will cause the
stops the engine and fuel pump if the vehicle
engine to suddenly turn off, making riding
falls over. To reset the sensor, you must turn the
unsafe.
ignition switch to the OFF position and back to
If you stop the engine using the engine stop
the ON position before the engine can be
switch, turn the ignition switch to the OFF
restarted.
position. Failing to do so will drain the battery.
Odometer
The display locks at 999,999 when the read-out
exceeds 999,999.
Continued 109
Caring for Your Vehicle
110
Caring for Your Vehicle
Information
5. Lubricate the drive chain immediately after ● Do not direct water at the muffler:
washing and drying the vehicle. u Water in the muffler can prevent starting
6. Apply a coat of wax to prevent corrosion. and causes rust in the muffler.
u Avoid products that contain harsh ● Dry the brakes:
detergents or chemical solvents. These u Water adversely affects braking
can damage the metal, paint, and plastic effectiveness. After washing, apply the
on your vehicle. brakes intermittently at low speed to
Keep the wax clear of the tires and brakes. help dry them.
u If your vehicle has any matte painted ● Do not direct water at the tool box:
parts, do not apply a coat of wax to the u Water in the tool box can damage your
matte painted surface. documents and other belongings.
● Do not direct water at the air cleaner:
u Water in the air cleaner can prevent the
engine from starting.
Continued 111
Caring for Your Vehicle
112
Caring for Your Vehicle
Information
clean the windscreen.
113
Storing Your Vehicle
● Lubricate the drive chain. 2 P. 67 visit our website at www.honda.ca and look up
● Place your vehicle on a maintenance stand “Storage Tips” under the “Honda Warranty” in
and position a block so that both tires are the Warranty tab for your Model.
off the ground.
● After rain, remove the body cover and allow
the vehicle to dry.
● Remove the battery (2 P. 72) to prevent
discharge. Fully charge the battery and then
place it in a shaded, well-ventilated area.
u If you leave the battery in place,
disconnect the negative - terminal to
prevent discharge.
114
Transporting Your Vehicle
Information
Towing your vehicle with a wheel or wheels on
the ground can cause serious damage to the
transmission.
115
You & the Environment
116
Vehicle Identification Number
Vehicle Identification
Number
The VIN and engine serial number uniquely
identify your vehicle and are required in order
to register your vehicle. They may also be
required when ordering replacement parts. VIN
You should record these numbers and keep
them in a safe place.
Information
VIN
Engine number
117
Emission Control Systems
118
Emission Control Systems
Information
The exhaust emission control system includes # Catalytic Converters
the following components that should not need The exhaust system contains one or more
adjustment, although periodic inspection by catalytic converters. Catalytic converters use a
your dealer is recommended. catalyst to convert most of the harmful exhaust
gas compounds into harmless compounds.
# PGM-FI System
The PGM-FI (programmed fuel injection) system
uses sequential multiport fuel injection, and is
comprised of air intake, engine control, fuel
control, and exhaust control subsystems. The
engine control module (ECM) uses sensors to
determine how much air enters the engine, and
then controls how much fuel to inject.
Continued 119
Emission Control Systems
The engine is equipped with a closed crankcase rendering inoperative by any person, other than
system to prevent discharging crankcase for purposes of maintenance, repair or
emissions into the atmosphere. replacement, of any device or element of
Blow-by gas is returned to the combustion design incorporated into any new vehicle for
chamber through the air cleaner and throttle the purpose of noise control prior to its sale or
body. delivery to the ultimate purchaser or while it is
in use; or (2) the use of the vehicle after such
Fuel Permeation Emission Control
device or element of design has been removed
The fuel tank, fuel hoses, and fuel vapor charge or rendered inoperative by any person.
hoses use fuel permeation control technologies
to prevent fuel vapor emissions. Tampering with
these components to reduce or defeat the
120
Emission Control Systems
Information
● Removing or disabling any emissions economy
compliance component, or replacing any
compliance component with a noncompliant
component.
121
Catalytic Converter
122
Oxygenated Fuels
Information
blend requirement.
Improper use of oxygenated fuels can damage
metal, rubber, and plastic parts of your fuel
The following fuel blends have been approved system.
for use in your vehicle: Oxygenated fuel can also damage paint.
● Ethanol (ethyl alcohol) up to 10% by volume. Damage caused by spilled fuel is not covered by
u Gasoline containing ethanol may be warranty.
marketed under the name Gasohol.
● Do not use gasoline containing methanol If you notice any undesirable operating
(methyl alcohol). symptoms or performance problems, try a
different brand of gasoline.
123
Authorized Manuals
Description
2021 CRF300L/LA/LR/LRA Service Manual
Common Service Manual (61CSM00)
USA Winter Storage Guide (S9507)
2021 CRF300LR/LRA Owner’s Manual
124
Warranty Coverage and Service
Information
● USA Noise Control Warranty warranties.
The responsibilities, restrictions, and exclusions USA You can extend almost all of your warranty
that apply to these warranties are explained in coverage through the Honda Protection Plan.
the Warranties Booklet given to you by your For more information, see your Honda dealer.
Honda dealer at the time of purchase. Always
keep your Honda owner's card with your
Warranties Booklet.
Continued 125
Warranty Coverage and Service
126
Warranty Coverage and Service
Information
authorize that inspection, and your dealer will
return the results of the inspection. If a problem
exists and is covered under warranty, your
dealer will perform the warranty repairs. If you
have any questions about your warranty
coverage or the nature of the repair, talk to the
Service Manager of your Honda dealer.
127
Honda Contacts
128
Honda Contacts
Information
Parts, Pro Honda products, Honda Genuine
Accessories (USA only), and Honda accessories
and products (Canada only) that provide the
same quality that went into your vehicle.
129
Reporting Safety Defects
Information
http://www.tc.gc.ca/roadsafety.
If Transport Canada receives similar
complaints, it may open an
investigation, and if it finds that a
safety defect exists in a group of
vehicles, it may lead to a recall and
remedy campaign. However, Transport
Canada cannot become involved in
individual problems between you, your
dealer, or Honda Canada Inc.
131
Specifications
■ Main Components 1st 3.538
Overall length 87.8 in (2,230 mm) 2nd 2.250
Overall width 36.2 in (920 mm) 3rd 1.650
Gear ratio
Overall height 55.7 in (1,415 mm) 4th 1.346
Wheelbase 57.3 in (1,455 mm) 5th 1.115
Minimum ground 6th 0.925
10.8 in (275 mm)
clearance Reduction ratio
Caster angle 27.5° 2.807 / 2.857
(primary / final)
Trail 4.3 in (109 mm)
*1 : Including rider, passenger, all luggage, and accessories.
CRF300LR 331 lb (150 kg)
Curb weight
CRF300LRA 335 lb (152 kg)
50 STATE
Specifications
132
Specifications
Specifications
Front 0.12 in (3.0 mm) Recommended
Minimum tread Pro Honda HP Coolant
coolant
depth Rear 0.12 in (3.0 mm)
Drive chain slack 2 - 2 1/4 in (50 - 55 mm)
Spark plug (standard) SIMR8A9 (NGK)
Recommended
(non-
Spark plug gap 0.03 - 0.04 in (0.8 - 0.9 mm) drive chain Pro Honda HP Chain Lube or equivalent
adjustable)
lubricant
(non-
Idle speed 1,450 ± 100 rpm Standard drive DID 520VF
adjustable)
chain No. of links 106
Honda 4-stroke motorcycle oil API Service
Classification SG or higher, excluding oils Drive
Recommended 14T
marked as “Energy Conserving” or Standard sprocket sprocket
engine oil size Driven
“Resource Conserving” SAE 10W-30, JASO T 40T
903 standard MA sprocket
133
Specifications
■ Bulbs
Headlight LED
Brake light / Taillight 12 V-21 / 5 W
Front turn signal / Position
12 V-21 / 5 W x 2
light
Rear turn signal 12 V-21 W x 2
License plate light LED
■ Fuses
Main fuse 30 A
CRF300LR 10 A
Other fuse
CRF300LRA 30 A, 10 A
Specifications
■ Torque Specifications
Hook bolt 15 lbf·ft (21 N·m, 2.1 kgf·m)
Tail cap cover screw 3.9 lbf·ft (5.25 N·m, 0.5 kgf·m)
Spark arrester mounting bolt 6.6 lbf·ft (9.0 N·m, 0.9 kgf·m)
134
Information Record
VIN
Engine No.
Color Label & Code
Owner's Name
Address
City/State
Phone
Dealer's Name
Address
City/State
Phone
Service Manager
135
California Proposition 65 Warning
WARNING: Operating, servicing and maintaining a passenger
vehicle or off-highway motor vehicle can expose you to chemicals
including engine exhaust, carbon monoxide, phthalates, and lead,
which are known to the State of California to cause cancer and birth
defects or other reproductive harm. To minimize exposure, avoid
breathing exhaust, do not idle the engine except as necessary, service
your vehicle in a well-ventilated area and wear gloves or wash your
hands frequently when servicing your vehicle. For more information go
to
www.P65Warnings.ca.gov/passenger-vehicle.
31K1TC00
00X31-K1T-C000 PRINTED IN USA