When A Stall or An EGT Overlimit Is Detected

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Single Aisle TECHNICAL TRAINING MANUAL

START FAILURES (US) (3)


EXHAUST GAS TEMPERATURE OVERLIMIT OR STALL
FAULT IN MANUAL MODE
When a stall or an EGT overlimit is detected, an aural warning sounds,
the MASTER CAUTion and the engine FAULT lights come on and an
ECAM message appears.
In the shown case, the FADEC has detected an engine stall. If no
corrective action is taken by the crew, the FADEC will abort the start
following an overlimit detection.
U7Z08431 - U2XT1T0 - UM74D2CFM000002

T1 (CFM 56) (Lvl 2&3) START FAILURES (US) (3) Oct 24, 2008
70 - POWER PLANT CFM 56 Page 196
Single Aisle TECHNICAL TRAINING MANUAL
U7Z08431 - U2XT1T0 - UM74D2CFM000002

EXHAUST GAS TEMPERATURE OVERLIMIT OR STALL FAULT IN MANUAL MODE

T1 (CFM 56) (Lvl 2&3) START FAILURES (US) (3) Oct 24, 2008
70 - POWER PLANT CFM 56 Page 197

You might also like