Functional module for use in all design variants of the fire alarm system FMZ 5000. Includes a serial communication channel in RS-232 standard. Preferred for data transmission to an WEBmodule, a MxNet module or a report printer. The module status is indicated by 3 LEDs.
Product features Application
• An RS-232-standard serial interface is connected For serial data transmission in RS-232 standard. to an SUB-D socket When using the data protocol MX2, all signals from the fire alarm panel can be sent to control stations or visualization • Baud rates adjustable from 300 to 115.200 baud. programs and commands can be received from them. • All settings of the module, the application and the Up to 3 modules can be used in one fire alarm panel. communication parameters are carried out with the MxSysCon configuration program. Included in delivery Module completely assembled and ready for installation in the fire alarm panel. Technical specifications Operating voltage 19 V - 29 V DC Not included in delivery Quiescent current 42 mA DC SUB-D plug, 9-pin Outputs COM1 RS-232 SUB-D socket Max. terminal cross-section 2.5 mm2 (AWG 13) Note -5 °C to +40 °C The interface is not opto-isolated. Ambient temperature If devices outside the fire alarm panel system are connected, (+23 °F to +104 °F) these must be opto-isolated using a separate converter. Relative humidity max. 95 % (IEC 721-3-3) no condensation IP rating (EN 60529) IP 20 Approvals / marking Enclosure Polyamide PA6.6, green See panels Installation position vertical Mounting rail 35 mm DIN 46277, Mounting top hat profile The contents of this publication are subject to modifications without notice. All rights reserved.
Weight 100 g (0.2 lbs)
22.5 x 99 x 114.5 mm (WxHxD) Dimensions 0.9 x 3.9 x 4.5 inch (WxHxD) 301-420_017 / AI00_2015en
1/1
Minimax GmbH & Co. KG | Industriestr. 10/12 | 23840 Bad Oldesloe | detection@minimax.de | www.minimax.com