Professional Documents
Culture Documents
Guidelines For Inspection
Guidelines For Inspection
Guidelines For Inspection
Note: Please check YES or NO in the given box and if some comments write in remarks column
Signature: Signature:
Date: Date:
1
CHECKLIST FOR HANDTOOLS INSPECTION
Note: Please check YES or NO in the given box and if some comments write in remarks column
Signature: Signature:
Date: Date:
2
Project Name: Casa Mira Towers Mandaue Date:
Note: Please check YES or NO in the given box and if some comments write in remarks column
Signature: Signature:
Date: Date:
3
Checklist no.: Model:
Equipment Name and Serial Number BENCH CUTTING MACHINE / CUT OFF
Note: Please check YES or NO in the given box and if some comments write in remarks column
Signature: Signature:
Date: Date:
4
Equipment Name and Serial Number Portable Grinder
Note: Please check YES or NO in the given box and if some comments write in remarks column
Signature: Signature:
Date: Date:
5
Equipment Name and Serial Number Electrical Pump
Note: Please check YES or NO in the given box and if some comments write in remarks column
Signature: Signature:
Date: Date:
6
Equipment Name and Serial Number Welding Machine
Note: Please check YES or NO in the given box and if some comments write in remarks column
Signature: Signature:
Date: Date:
7
Note: Please check YES or NO in the given box and if some comments write in remarks column
1 Physical condition
2 Electrical connection should be taken through industrial
plug in proper manner.
3 Power cable should be free from damages.
4 Operating switch must be free from defects, e.g.,
uninsulated broken, etc.
5 On / Off or other switches should free from defects, e.g.,
uninsulated and broken, etc.
6 Emergency stop button should be mushroom headed
with red colour.
7 Bar support should be properly fitted with machine.
8 Pins should be free from loose fitting.
9 Machine should be grounded as per IS 3043:1987.
10 Machine should be operated by competent person.
Signature: Signature:
Date: Date:
Note: Please check YES or NO in the given box and if some comments write in remarks column
8
1 Cylinder should be kept in trolley.
2 Always keep in upright position.
3 Properly secured.
4 Valve protection cap.
5 Regulator should be free from any defect.
6 Pressure gauge should be in proper condition.
7 Provide flashback arrestor.
8 Provide industrial clip.
9 Hose condition should be good with colour coded.
10 Joint should be firm and free from defect, e.g., oily, rust
and leakage, etc.
11 Torch should be in good condition
12 Use proper PPE’s for the job, e.g., leather hand gloves
and safety goggles, etc.
13 Keep fire extinguisher at working place.
14 Provide both, made by fire retardant material ( if
required ).
15 Work carried out by competent person.
Signature: Signature:
Date: Date:
9
Note: Please check YES or NO in the given box and if some comments write in remarks column
Signature: Signature:
Date: Date:
10
Note: Please check YES or NO in the given box and if some comments write in remarks column
Signature: Signature:
Date: Date:
11
Note: Please check YES or NO in the given box and if some comments write in remarks column
Signature: Signature:
Date: Date:
12