Professional Documents
Culture Documents
I2006 Insulation Specification
I2006 Insulation Specification
I2006
Insulation specification
Project name: DAMMAM ISTP
Project number:
Reviewed version of this document must be approved by: European Reliability COE
1 PRESCRIPTION ....................................................................................................................................................... 3
1.1 CLASS 1 ................................................................................................................................................................... 3
1 Prescription
1.1 Class 1
55
50
45
40
Insulation thickness
35
30
25
20
15
10
0
10 15 20 25 32 40 50 65 80 100 150 200 250 300
Piping diameter (DM)
In this class all pipelines fall with a medium temperature to 100 degrees.
All parts of a system that are fixed to the insulated objects must be insulated with the same insulating thickness as the part
such as rings, rods etc.
Between the casing surface and an obstacle there should be a minimum area kept of 50 mm.
R.V.S. apparatus with an average working temperature of at least 60 degrees should always be pre treated.
Name Measurement
(DN)
Personal protection 10 - 300
General demands
Thermal insulation
General demands
Insulation material 10 - 300
Sheet material 10 - 300
Swages 10 - 300
Pipes 10 - 300
Elbows 10 - 80
100 - 300
Flanges 10 - 300
Valves 10 - 300
Expansion bellows 10 - 300
T-pieces 10 - 300
Reducers 10 - 300
Cut-outs
Expansion 10 - 300
Sealing
Walk ability 10 - 300
Tracing 10 - 300