Professional Documents
Culture Documents
HQNQ Broatlongyear
HQNQ Broatlongyear
REV 01-DEC-06
Diamond Products
Core Barrels
Overshots
Drill Rods
Water Swivels
Hoisting Plugs
Casing
Recovery Tools
Adapter Subs
Conversion Kits
Wedges
Tools
Technical Data
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Diamond Products
Impregnated Bits
Thermally Stable Diamond Bits (TSD)
Reaming Shells
Casing Shoes
Casing Bits
Bit and Shell Gauges
Options and Specialty
Diamond Products
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Impregnated Bits
HQ Impregnated Bits
Boart Longyear introduces metal coated diamond impregnated bits - Standard Reaming Shell
the latest in industrial diamond technology. Geometry Geometry
• Significantly outperforms the successful Series range in both drilling Alpha01 4050913 4050770
speed and bit life. Alpha01 Abrasive 4050891 4050097
• Protects the diamond from oxidation and surface degradation Alpha02 4050844 4050098
during manufacturing. Alpha04 4051322 4050103
• Inhibits the premature "pull-out" of the diamond. Alpha06 4051413 *
• Increases the number of cutting edges exposed to the rock. Alpha06 Abrasive * *
• Available in multiple standard configurations and selected on the Alpha07 4051399 *
basis of relative rock hardness and ground conditions. Alpha07 Abrasive * *
Alpha07 Competent 4051411 *
Alpha08 4052212 4051227
Alpha08 Abrasive 4051551 *
Alpha08 Competent 4051414 4050235
Alpha09 4052210 *
Alpha09 Competent 4052256 *
Alpha10 4052211 *
Alpha10 Competent * *
* Available on special request.
NOTE: Refer to the Tech Data section for technical specifications and
the ITHT Product Manual or the Diamond Products Field
Standard: Designed to handle a wide variety of formations. Manual for additional operating information.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Impregnated Bits
HQ3 Impregnated Bits
Standard Reaming Shell
Boart Longyear introduces metal coated diamond impregnated bits -
Geometry Geometry
the latest in industrial diamond technology.
• Significantly outperforms the successful Series range in both drilling Alpha01 4051980 4050771
speed and bit life. Alpha01 Abrasive * 4051004
• Protects the diamond from oxidation and surface degradation Alpha02 4050867 4050171
during manufacturing. Alpha04 * 4050212
• Inhibits the premature "pull-out" of the diamond. Alpha06 * 4050172
• Increases the number of cutting edges exposed to the rock. Alpha06 Abrasive * 4051617
• Available in multiple standard configurations and selected on the Alpha07 * *
basis of relative rock hardness and ground conditions. Alpha07 Abrasive * 4052092
• Triple-tube bits are used with Boart Longyear triple-tube core Alpha07 Competent * *
barrels. The design of the face discharge waterways and core lifter Alpha08 4052574 4050170
case forces the drilling fluid to the bit face. Core can be recovered Alpha08 Abrasive * 4051133
and inspected in a virtually undisturbed condition. Alpha08 Competent * *
Alpha09 4052573 *
Alpha09 Competent * *
Alpha10 * 4050169
Alpha10 Competent * *
Face Discharge
Bit
Drilling Fluid
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Applications:
• TSD bits are commonly used for exploration of diamond bearing
Kimberlite formations.
• Suitable for geotechnical drilling applications.
• Although best suited for soft ground conditions, intermittent hard
ground can be tolerated.
HQ TSD Bit
Face Discharge
Waterways
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Reaming Shells
The recommended practice is to alternate two reaming shells in each Reaming Shells - Sourced from Americas
hole drilled to maintain hole diameter. Upon bit changes, the reaming HQ/HQ3 Standard 3522861
shell should be checked for wear with the bit and shell wear gauge. HQ/HQ3 Stabilized 3522867
Failure to observe these recommended practices will result in either a
poorly stabilized bit or an undersized hole that will require costly Reaming Shells - Sourced from Australasia
reaming.
HQ/HQ3 Heavy Duty Impregnated 4101028
HQ/HQ3 Adaptor Coupling Impregnated 4101175
HQ/HQ3 Surface Set 4101854
HQ/HQ3 Adaptor Coupling Surface Set 4101844
HQ/HQ3 Rod Line Surface Set 4101959
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Casing Shoes
Casing Shoe Casing Shoes
The inside diameter of the casing shoe is not set with diamonds and
HW Casing Shoe, Series 2 4051001*
is flush with the inside diameter of the casing, permitting free passage
HWT V-Ring Casing Shoe 509064
of the core barrel past the casing shoe.
HWT Oversize Casing Shoe, Series 2 4051215
Applications:
Casing Shoes - Sourced from Australasia
• The casing shoe is threaded to the end of the casing string for
penetration through overburden. HW Standard Impregnated 4101555
• Assists in seating the casing into the bedrock, providing a tight HW HD-6mm Impregnated 4105160
seal for the drilling fluids to flow through to the surface. HW Surface Set 4103265
• Used to ream the casing downward when advancing a casing HWT Standard Impregnated 4100542
string in an existing hole with the rod string still in place. HWT Heavy Duty Impregnated 4100543
HWT Surface Set 4102700
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Casing Bits
Casing Bit Casing Bits
The inside diameter of the casing bit is set with diamonds and is
HW **
smaller than the casing shoe. It will not permit the passage of the
HWT V-Ring 515129
core barrel.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
1
1
1
2
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Core Barrels
Surface
HQ
HQ3
Underground
HQU
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Core Barrels - HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Core Barrel - HQ
Boart Longyear offers a field proven standard HQ core barrel for use Core Barrels kg lbs
with HQ/HRQHP rods. It consists of the head assembly (item 1), inner 1-13 3542946 HQ Core Barrel 1.5 m / 5 ft — —
tube components (items 2-5), and outer tube components (items 6-
1-13 3542947 HQ Core Barrel 3.0 m / 10 ft — —
11). The In-The-Hole Tools Product Manual and core barrel Safety
Poster are included with all core barrels. Standard Configuration Qty
1 3542941 HQ Head Assembly* 1
All head assemblies are supplied with landing
2 25258 Inner Tube, 1.5 m / 5 ft 1
indication installed. Refer to the Head Assembly section.
2 25236 Inner Tube, 3.0 m / 10 ft 1
How to Order: 3 25238 Stop Ring 1
To order a standard core barrel: 4 30489 Core Lifter 1
• Select a 1.5 m/5 ft or 3.0 m/10 ft core barrel part number. 5 25237 Core Lifter Case 1
Options: 6 3545409 HQ Full-Hole Tanged Locking Coupling 1
There are alternatives to the standard core barrel which are indicated 7 25241 Adapter Coupling 1
by a “ ”. To view these options refer to the head assembly, inner tube 8 25242 Landing Ring 1
components and/or outer tube components sections. 9 25259 Outer Tube, 1.5 m / 5 ft 1
How to Order: 9 25243 Outer Tube, 3.0 m / 10 ft 1
To order a non-standard core barrel: 10 44408 Inner Tube Stabilizer 1
• Select a 1.5 m/5 ft or 3.0 m/10 ft core barrel part number. 11 25245 Thread Protector 1
• List all optional parts and part numbers from the head assembly, 12 3541994 ITHT Product Manual (not shown) 1
inner tube components and/or outer tube components sections. 13 306390 Safety Poster (not shown) 1
NOTE: For information on packaging and assembly, refer to the
packaging and/or assembly sections. ■ Additional options available.
* See the head assembly section for a detailed configuration and
available options.
NOTE: Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
2 1
9
6
10
4
8
11 5
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Head Assembly - HQ
The standard head assembly is supplied with Head Assembly kg lbs
landing indication (items 15-16) installed. Landing Indication must be
1-29 3542941 HQ Head Assembly — —
reset by popping the ball back through the bushing after each use
(see the ITHT Product Manual). If you do not wish to use landing Standard Configuration Qty
indication it must be removed or slow descent times may result. 1 42913 Spearhead Point 1
Options: 2 15141 Compression Spring 1
There are alternatives to the standard head assembly which are 3 42914 Detent Plunger 1
indicated by a “ ”. If options are ordered, the standard head 4 3540330 Spearhead Base 1
assembly is supplied with the options shipped as separate items (not 5 42905 Spirol Pin 7/16" x 1" 1
installed). 6 3540151 Latch Retracting Case 1
How to Order: 7 24524 Spring Pin 1/2" x 2-3/4" 2
To order a non-standard core barrel: 8 3541932 Nyloc Bolt 3/8”-16UNC x 3/4” 1
• Select a 1.5 m/5 ft or 3.0 m/10 ft core barrel part number. 9 104953 Washer 1
• List all optional parts and part numbers from this page, and/or the 10 3543619 Latch Compression Spring 1
options from the inner tube and outer tube components sections. 11 3540156 Upper Latch Body 1
12 104818 Latch 2
NOTE: For information on packaging and assembly, refer to the 13 306216 Link 2
packaging and/or assembly sections. 14 24305 Spring Pin 1/2" x 2" 1
15 62374 Stainless Steel Ball, 22 mm 1
19 1 16 62380 Landing Indicator Bushing 1
17 104958 Landing Shoulder 1
20 18 104957 Lower Latch Body 1
5
19 3548105 Washer, Nord-lock 1
2 20 44574 Hex Nut 1
Optional Dry Hole Valve 21 25231 Spindle 1
21 3
Kit for lost circulation 22 43513 Shut-Off Valve, Hard 2
conditions in deep holes.
23 25233 Valve Adjusting Washer 2
24 24528 Thrust Bearing 2
4 A8 25 25234 Spindle Bearing 1
26 24312 Hanger Bearing 1
27 24529 Compression Spring 1
22B 6 28 103465 Stover Lock Nut 1
22A 29 40678 Inner Tube Cap Assembly (28A, B, C, D) —
7
22 29A 17447 Grease Fitting 1
29B 62374 Stainless Steel Ball, 22 mm 1
22B 23 29C 40401 Inner Tube Cap 1
22A 7
29D 37382 Check Valve Body 1
22
Head Assembly Options Qty
23 A6 16A 3542834 Landing Indicator Bushing, Deep Hole 1
A7 22A 25232 Shut-Off Valve, Soft 2
24 8 22B 25233 Washer 4
A8
24 9 Optional Dry Hole Valve* Qty
A1
A 3541210 Dry Hole Valve Kit —
10 A2 A3 A1 3540152 Steel Threaded Ball, 22 mm 1
25
A4 A5 A2 306131 Fluid Retention Bushing 1
12 A3 3543378 Fluid Retention Bushing, Heavy 1
11
26 A4 104966 Fluid Retention Spring, Light 1
13 A5 104971 Fluid Retention Spring, Medium 1
13
A6 3543388 Shoulder Bolt 1
27
14 A7 3540153 Dry Hole Valve Holder 1
12 A8 3541117 Nylon Insert Machine Screw 2
28 A9 3541739 Wrench - for item B6 (not shown) 1
B1 A10 3543551 Wrench - for item B8 (not shown) 1
15 A11 3542987 Drift Tool (not shown) 1
B2
A12 3543407 Kit Bag (not shown) 1
29C 16 B3 B4
Optional Fluid Retention* Qty
17 B 3542610 Fluid Retention Kit —
29A B1 62374 Stainless Steel Ball, 22 mm 1
B2 306131 Fluid Retention Bushing 1
18 Optional Fluid Retention
Kit for lost circulation B3 104966 Fluid Retention Spring, Light 1
29B conditions. B4 104971 Fluid Retention Spring, Medium 1
29D C Fluid Retention Optional Spring Qty
C 104972 Fluid Retention Spring, Heavy 1
NOTE: Refer to the Tech Data section for technical specifications and * Replaces landing indication when drilling in lost circulation conditions.
the ITHT Product Manual for additional operating information. The Dry Hole Valve Kit is recommended when drilling over 150 m (500 ft).
12/06-MKT1644 P/N 3543105-M
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
2
1
4A 4
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
To order chrome plated outer tubes (45 cm (18 in) at both ends on the
outside diameter) use the following part numbers.
9B 25259CP Outer Tube CP 1.5 m / 5 ft 1
9B 25243CP Outer Tube CP 3.0 m / 10 ft 1
* Full hole outer tubes are supplied chrome plated 45 cm (18 in) at
both ends on the outside diameter as standard.
NOTE: Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
7
10
11
8
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Head Locking
Assembly Coupling
Adapter
Coupling
Landing Ring
Outer Tube
Inner Tube
Inner Tube
Stabilizer
Outer Tube
Inner Tube
Inner Tube
Stabilizer
Core Lifter
Bit
Case
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
11 Parts Qty
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
12
15
** These items are required to pump the core
2 out of the inner tube. Remove the head
assembly from the inner tube, insert the piston
plug and thread the pump out adapter on to
16
the inner tube.
3
13 Fluid pressure supplied by optional hand
8
pump group (p/n 26738) or pump-out group
(p/n 26742). See Tools section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
10
** These items are required to pump the core
2 out of the inner tube. Remove the head
assembly from the inner tube, insert the piston
plug and thread the pump out adapter on to
the inner tube.
3
Fluid pressure supplied by optional hand
pump group (p/n 26738) or pump-out group
(p/n 26742). See Tools section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
NOTE: For information on packaging and assembly, refer to the Q® Locking Coupling Options Qty
packaging and/or assembly sections.
11A 25240 HQ Conventional Tanged 1
To order chrome plated outer tubes (45 cm (18 in) at both ends on the
outside diameter) use the following part numbers.
11 11A 14A 25259CP Outer Tube CP 1.5 m / 5 ft 1
14A 25243CP Outer Tube CP 3.0 m / 10 ft 1
14
NOTE: Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
12
15
16 13
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Parts Qty
11
1 42913 Spearhead Point 1
1
2 15141 Compression Spring 1
12 3 42914 Detent Plunger 1
21
4 42905 Spirol Pin 7/16" x 1" 2
5 24524 Spring Pin 1/2" x 2-3/4" 2
2 13
6 3541932 Nyloc Bolt 3/8”-16UNC x 3/4” 2
22
7 3543619 Latch Compression Spring 1
3 8 104818 Latch 4
14 8 306216 Link 4
4 10 24305 Spring Pin 1/2" x 2" 2
23
11 62374 Stainless Steel Ball, 22 mm 1
15 12 62380 Landing Indicator Bushing 2
5
13 104958 Landing Shoulder 1
14 44574 Hex Nut 1
16
24 15 43513 Shut-Off Valve, Hard 4
6
16 24528 Thrust Bearing 2
17 25234 Spindle Bearing 1
17 18 24312 Hanger Bearing 1
7
25 19 103465 Stover Lock Nut 1
20 17447 Grease Fitting 2
8 21 26515 Stop Ring 2
18 22 26516 Core Lifter, Fluted 20
26 23 26514 Core Lifter Case 4
9 24 20651 O Ring 5
19
25 25242 Landing Ring 2
10 26 44408 Inner Tube Stabilizer 2
20
NOTE: Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
2 1
9
6
10
11
8 5
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
15 NOTE: Refer to the Tech Data section for technical specifications and
14 the ITHT Product Manual for additional operating information.
16
17
18
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
A
Inner Tube Loading
Sleeve, reference only.
3 See Tools section.
4A 4
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
NOTE: For information on packaging and assembly, refer to the Q® Locking Coupling Options Qty
packaging and/or assembly sections.
6A 62765 HQ Conventional 1
To order chrome plated outer tubes (45 cm (18 in) at both ends on the
9A 9
outside diameter) use the following part numbers.
9B 25259CP Outer Tube CP 1.5 m / 5 ft 1
9B 25243CP Outer Tube CP 3.0 m / 10 ft 1
* Full hole outer tubes are supplied chrome plated 45 cm (18 in) at
both ends on the outside diameter as standard.
NOTE: Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
10
11
8
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Head
Assembly
Locking
Coupling
Drive
Coupling
Landing
Ring
Outer Tube
Inner Tube
Inner Tube
Stabilizer
1
Outer Tube
Inner Tube
Inner Tube
Stabilizer
Core Lifter
Bit
Case
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Parts Qty
11 1 42913 Spearhead Point 1
1 2 15141 Compression Spring 1
3 42914 Detent Plunger 1
12 4 42905 Spirol Pin, 7/16" x 1" 1
22 5 24524 Spring Pin, 1/2 x 2-3/4" 2
2 13 6 3541932 Nyloc Bolt, 3/8"-16 x 3/4" 2
7 3543047 Latch Compression Spring 1
8 104818 Latch 4
3 23 9 3543999 Link 4
14
10 24305 Spring Pin, 1/2 x 1-1/2" 1
11 3543944 Nyloc Shoulder Bolt 1
4
12 3541117 Nyloc Machine Screw 4
15 13 3543904 Latch Indicator Bushing 4
5 14 100696 Pump-In Seal 4
24 15 104958 Landing Shoulder 2
16 43513 Shut-off Valve, Hard 4
16
6 17 24528 Thrust Bearing 2
18 25234 Spindle Bearing 1
17 19 24312 Hanger Bearing 1
20 103465 Stover Lock Nut 1
7 25 21 17447 Grease Fitting 1
22 25238 Stop Ring 2
18 23 30489 Core Lifter 20
8 24 25237 Core Lifter Case 4
25 25242 Landing Ring 2
26 26 44408 Inner Tube Stabilizer 2
19
NOTE: Refer to the Tech Data section for technical specifications and
9 the ITHT Product Manual for additional operating information.
20
10
21
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Overshots
Compact Overshot
Ezy Lock
Underground
Loading Chamber
Wireline Cable
Spare Parts Kit
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
11 NOTE: Refer to Tech Data for technical specifications and the ITHT
12 Product Manual for additional operating information.
8
13
14
Dry Hole Lowering Kit
16 27
15
23 26
16
25 27
20
18 19
19
21
22 17
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
10
16
11
12
11
18
17
19
20
18
21
22
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Loading Chamber
Application: Assembly kg lbs
• Underground applications with HQU core barrels. Select assembly 1-5 3542138 HRQHP Loading Chamber Assembly 6.6 14.5
according to rod string type - HRQHP/HQ. rods require an adapter
sub, see adapter sub section. Parts Qty
• Used to pump the overshot into the rod string for retrieval of the
1 3541817 Packing Plug 1
inner tube assembly.
2 3541816 Cable Guide Washer 3/16” 2
Wireline Cable, 3 25546 Cable Packing 1
reference only. 4 104597 Quick Coupler Tip #16 NPT 1
See Overshot section. 5 3542137 Loading Chamber Body 1
1 Assembly kg lbs
1-5 3542498 HQ Loading Chamber Assembly 6.6 14.5
Parts Qty
1 3541817 Packing Plug 1
2 2 3541816 Cable Guide Washer 3/16” 2
3 25546 Cable Packing 1
3 4 104597 Quick Coupler Tip #16 NPT 1
5 3542499 Loading Chamber Body 1
2
Options Qty
6 3547307 HRQHP Drill Rod Extension, 7-1/2” 1
5 6 27150 HQ Drill Rod Extension, 7-1/2” 1
7 100876 #16 NPT Quick Coupler Body, Female 1
4 NOTE: The drill rod extension must be used to extend the drill string
past the running overshot in order to attach the loading
chamber.
Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
Reference only.
See Overshot section.
Reference only.
See Water Swivel
section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Wireline Cable
Swaged Construction Wire Rope Features: Wireline Cable kgs/m lbs/ft
• Longer life.
1 3542822 Swaged 3/16” (4.8 mm) 0.134 0.090
• Safer to handle.
2 19437 Galvanized, 3/16” — —
• 50% higher breaking strength than cable previously offered.
• High resistance to unraveling, resists “bird nesting”.
Wireline Cable Oval Sleeve kg lbs
• Compatible with 3/16” nicopress oval sleeve (p/n 30172).
3 30172 Oval Sleeve, 3/16” 0.02 0.05
NOTE: Swaged cable is not recommended for underground
applications where minimum radius is less than 127 mm NOTE: For more information on the oval sleeve crimping tool, refer to
(5 inches). the Tools section.
Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
3x7
Left Hand Lay
Rotary Wire Rope
Crimping Tool
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Parts Qty
Replace lifting dogs in matched sets, incorrectly
matched lifting dogs may result in product failure and safety hazard. 1 25986 Thrust Bearing 1
2 25985 Castle Nut 1
3 44615 Cotter Pin 2
9 4 17447 Grease Fitting 1
1
5 44524 Hex Nut 3/4” UNC 1
6 3543772 Ball 11/32” 2
9
2 7 6951 Compression Spring 1
8 3542027 Compression Spring 1
9 3540529 Lifting Dog 2
3 10 3540528 Plain Pin 1
11 24307 Spring Pin 1/4" x 2" 1
12 3546747 Locking Pin 1
13 3545073 Set Screw 1
4
NOTE: Refer to the Tech Data section for technical specifications and
10 the ITHT Product Manual for additional operating information.
5
11
6
7 12
8 13
1
8
Parts Qty
3 9 1 25986 Thrust Bearing 1
2 25985 Castle Nut 1
3 44615 Cotter Pin 2
4 17447 Grease Fitting 1
4
5 40927 Shear Pin 1
6 100696 Pump-In Lip Seal 2
5 7 25607 O Ring 4
8 40967 Valve Spring 1
9 40998 Lifting Dog 2
10 10 6951 Compression Spring 1
11 40969 Spring Pin 3/8" x 2" 1
6
11 12 29673 Pivot Pin 1
NOTE: Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
12
7
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Drill Rods
RQ ®HP
Q®
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
NOTE: Drill rods are sold by the bundle, see Packaging Information
section.
Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
Thru-wall Hardened
Surface Hardened
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Q® Drill Rods
Metric Lengths kg lbs
1 51592 HQ Drill Rod, 1.5 m 17.2 37.9
1 51593 HQ Drill Rod, 3.0 m 34.4 75.9
Surface Hardened
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Water Swivels
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
3
11
4 Reference only.
See Water Swivel
Hose.
12
13
14 6
Reference only.
See Adapter Sub
section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Options Qty
12 11A 88444 Ceramic Spindle Extension ■ 1
NOTE: Refer to the Tech Data section for technical specifications and
2 the ITHT Product Manual for additional operating information.
Reference only,
3 see Water swivel
Hose.
13
4
14
BW 5
Rod Box
15
6
Reference only, 10
see Adapter Sub
section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
AW
Rod Box
2
3
11
4 Reference only. Water Saver Sub,
See Water Swivel reference only.
Hose. See Adapter Sub
section
12
13
14 6
Reference only.
See Adapter Sub
section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
NOTE: Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
#16 NPT
AW
Rod Box
#20
NPT
3
BW
Rod Box
Universal
Water Swivel
to pump
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
3
AW 4
Rod Box 1
5
#16 NPT
AW
Rod Box
4
5
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
1 Parts Qty
5
1 23863 Washer Spring 2
2 2 19678 O Ring 6
3 23861 Swivel Packing 3
4 3546530 Wear Sleeve 2
6
3 5 20324 Ball Bearing 1
6 20169 O Ring 6
7 7 3546908 Thrust Bearing 1
8 25612 Felt Seal 2
NOTE: Refer to the ITHT Product Manual for additional operating
information.
8 4
1
5
Spare Parts Kit kg lbs
1-7 67628 Universal Water Swivel — —
Parts Qty
6 1 39171 Swivel Packing 1
2 2 29737 O Ring 1
3 67186 Lock Washer 1
4 40965 Retaining Ring 1
5 19906 Ball Bearing 1
3
6 39170 Spindle Extension 1
7 7 67187 Ball Thrust Bearing 1
NOTE: Refer to the ITHT Product Manual for additional operating
4 information.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
11 NOTE: Refer to the Tech Data section for technical specifications and
8 the ITHT Product Manual for additional operating information.
10
9
12
13
14
15
13
16 9
17 17
18 18
9
11
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Hoisting Plugs
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
3 2
5
Reference only.
See Adapter
Sub section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Options Qty
10 3542907 Shackle Guide 1
3 2 10
5
Reference only.
See Adapter
Sub section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Casing
HWT Casing
Casing Cutter
Wireline Casing Advancer
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Casing
Features: Metric Lengths kg lbs
• Tapered joint with modified buttress thread form. 1 101339 HWT Casing, 1.5 m 25.4 56.1
• Casing manufactured from 4130 chromium molybdenum alloy tubing,
1 101338 HWT Casing, 3.0 m 50.8 111.9
is a high strength product commonly used in geotechnical/hammer-
ing operations. Imperial Lengths kg lbs
• Identification groove supplied on “4130 Material” ONLY.
1 55055 HWT Casing, 2 ft 10.5 23.1
1 54826 HWT Casing, 5 ft 25.9 57.0
1 54843 HWT Casing, 10 ft 51.5 113.5
WT Thread Profile Drill rods MUST be pretorqued with the minimum recommended
make-up torque to preload the box and pin prior to drilling. Drilling
torque alone will not make-up the joint. Drilling operating torque
should never exceed make-up torque.
NOTE: Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
Thread Lubrication
• Z-50 Thread Compound (p/n 306486) is the recommended thread
lubricant to reduce wear and the possibility of galling during drilling
operations.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Casing Cutter
Features: Assembly kg lbs
• Used for cutting HW/HWT casing at any point in a drill hole when 1-8 60879 HW/HWT Casing Rod Cutter Assembly 16.3 36.0
the entire string can not be retrieved.
• HQ rod box connection. Parts Qty
Operations: 1 61460 Retaining Ring 1
Upon lowering the assembly, the cutting lugs are retracted inside the 2 26157 Stainless Steel Ball, 1-1/8” 1
body by the spring. With low rotation (25 rpm) initially, the cutting lugs 3 14528 Plunger 1
are forced out using water pressure, 1 380 kpa (200 psi). A drop in
4 22834 Pin, 3/16” x 1-11/16” 1
pressure indicates that the cutting operation is complete.
5 14531 Spring 1
6 60880 Body 1
7 62830 Casing Cutter Lug 2
8 36216 Spring Pin, 7/16” x 3” 2
Reference only.
See Adapter Sub NOTE: Refer to the ITHT Product Manual for additional operating
section. information.
4
7
7
8
8
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
NOTE: Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
4 5
6
5
8
6 7
7
Reference only. 9
10
See Oversized
8 10
Casing Shoe in
the Diamond
Products section.
11
12
13
16
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Recovery Tools
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Drill Rod
RQ ®HP/MQ/Q®
Reference only.
See Adapter Sub
section.
NW Rod Box
1
Connection
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Drill Rod
RQ ®HP/MQ/Q®
Reference only.
See Adapter Sub
section.
1 NW Rod Box
Connection
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Adapter Subs
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Reference only.
See Drill Rod
section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Reference only.
See Water Swivel
section.
Reference only.
See Water Swivel
section.
2
1
3 3
Reference Reference
only. See only. See
Drill Rod Drill Rod
section. section.
Reference only.
See Casing section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
1
Bullnose
Adapter Sub
Reference only.
See Drill Rod 2
section.
Reference only.
See Casing
section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Reference only.
See Casing
section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
1 2
3 4
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Conversion Kits
Core Barrel
HQ to HQ3 Core Barrel
Overshot
Compact to Ezy Lock
Water Swivel
Compact to Compact Plus
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Parts Qty
8 1 26512 Split Tube, 1.5 m / 5 ft 1
1 2 1 26513 Split Tube, 3.0 m / 10 ft 1
2 26515 Stop Ring 1
3 26516 Core Lifter, Fluted 1
3 4 26514 Core Lifter Case 1
7 5 26510 Core Ejection Piston 1
6 20651 O Ring 1
7 26662 Piston Plug 1
4 8 26517 Pump-out Adapter 1
6 NOTE: Refer to the Triple-Tube Core Barrel section for assembly
information and the ITHT Product Manual for additional
5 operating information.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Parts Qty
2 1 46098 Cap Screw, HH 3/4 UNC X 1-1/2 1
2 3458178 Washer, Nord-lock 1
3 3544103 Cap, Ezy Lock O/Shot 1
3
4 3544105 Spring, Ezy Lock O/Shot 1
5 3546745 Sleeve, Ezy Lock O/Shot 1
6 6951 Compression Spring 1
4 7 3543772 Ball 11/32" 2
8 3546748 Ezy Lock Overshot Head 1
9 3542027 Compression Spring 1
10 3540529 Lifting Dog 2
5 11 3540528 Plain Pin 1/2" x 2-1/8" 1
12 24307 Spring Pin 1/4" X 1-3/4" 1
13 3546747 Locking Pin 1
14 3545073 Set Screw, 3/8 UNF x 3/4 Nyloc 1
6
14
7
9
11
10
10
12
13 8
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Conversion Kits
Water Swivel Conversion Kit kg lbs
1-4 3546682 Compact to Compact Plus — —
Parts Qty
1 3546531 Upper Swivel Body 1
3 2 3546907 Spindle 1
3 3546908 Thrust Ball Bearing 1
2 4 3546909 Lower Swivel Body 1
4 1
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Wedges
Bypass Wedge
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Bypass Wedges
Deflection wedges are used to alter the course of a drill hole in a Bypass Wedge kg lbs
number of applications: 1 3547316 HQ Bypass Wedge 204.5 450
• Intersecting targets at a stipulated angle. 2 3543060 HQ Plug, Wooden 3.1 7.0
• Intersecting multiple targets below a common drill hole collar. 3 3542969 NQ/HQ Wedge Dropper, NW R/B 25.6 57
• Allowing multiple target intersections by drilling branch holes from 4 3547292 Copper Shear Pin 0.1 0.25
a previously drilled parent hole.
5 3547376 HQ Adapter 3.3 7.34
• To bypass problematic areas or abandoned equipment in a hole
to allow drilling to continue. 6 3543058 HQ Wedge Plug 7.7 17.0
7 3543059 HQ Steel Plug Basket 0.7 1.53
Boart Longyear's Bypass wedges provide a nominal 1.5° deflection. It
is recommended that multiple wedges are not installed closer than NOTE: Refer to the Tech Data section for technical specifications and
15m (50ft) apart. the ITHT Product Manual for additional operating information.
1 2 3 4
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Tools
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
4
4 Assembly kg lbs
1-5 28260 Full Grip HQ Outer Tube Wrench 3.6 8.0
Parts Qty
1 28261 Stationary Jaw 1
2 28262 Swing Jaw 1
3 38580 Pin 2
4 38583 Retaining Ring 4
5 28259 Wrench Handle 1
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Pipe Wrenches
Assembly kg lbs
1-5 14942 18” Heavy Duty Pipe Wrench 2.6 5.8
1 4
Parts Qty
2 1 14944 Hook Jaw 1
2 14943 Heel Jaw with Pin 1
3 200561 Coil and Spring 1
5
3 4 200562 Wrench Nut 1
3 5 — Wrench Handle (included) 1
2
Assembly kg lbs
1-5 14945 24” Heavy Duty Pipe Wrench 4.3 9.4
Parts Qty
1 14947 Hook Jaw 1
2 14946 Heel Jaw with Pin 1
3 200563 Coil and Spring 1
4 200564 Wrench Nut 1
5 — Wrench Handle (included) 1
Assembly kg lbs
1-5 14948 36” Heavy Duty Pipe Wrench 8.4 18.6
Parts Qty
1 14950 Hook Jaw 1
2 14949 Heel Jaw with Pin 1
Estimated Torque 3 200565 Coil and Spring 1
45 KG (100 LB) HAND LOAD 4 200566 Wrench Nut 1
18” Heavy Duty Pipe Wrench ..................................................... 200 Nm (150 ft lbf) 5 — Wrench Handle (included) 1
24” Heavy Duty Pipe Wrench ..................................................... 270 Nm (200 ft lbf)
36” Heavy Duty Pipe Wrench ..................................................... 400 Nm (300 ft lbf)
48” Heavy Duty Pipe Wrench ..................................................... 540 Nm (400 ft lbf) Assembly kg lbs
1-5 14951 48” Heavy Duty Pipe Wrench* 12.7 28.0
Parts Qty
1 14953 Hook Jaw 1
2 14952 Heel Jaw with Pin 1
3 200567 Coil and Spring 1
4 200568 Wrench Nut 1
5 — Wrench Handle (included) 1
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Rod Wrenches
6 Assembly kg lbs
5 1-7 43482 HRQHP/HQ Rod Wrench* 7.1 15.6
Parts Qty
1 43416 Stationary Jaw 2
2 43419 Swing Jaw 1
5 3 3 43484 Pin, 0.63” x 4” 1
4 4 43485 Pin, 0.63” x 2.75” 1
5 38583 Retaining Ring 4
6 43422 Spring 1
2 7 43483 Wrench Handle 1
1
* Recommended for making up “H” size drill rod, however it does not
provide sufficient torque for rod joints in holes beyond 230 m (750 ft).
NOTE: Refer to the Tech Data section for drill rod pretorque and the
ITHT Product Manual for additional operating information.
1
5
Estimated Torque
45 KG (100 LB) HAND LOAD
HRQHP/HQ Rod Wrench ............................................................ 200 Nm (150 ft lbf)
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Wireline cable
1
Reference only.
See Overshot
section.
1
Eye Bolt
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Pull up to retract
latches.
Reference only.
See Core Barrel
Section.
Reference only.
See Core Barrel
section for
locking couplings
or the Drill Rods
section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
To Pump-Out
Adapter. See
Triple-Tube Core
Barrel Section.
3
To Water Swivel. 4
5
See Water Swivel 6
Section. 4
7
To Pump-Out
Adapter. See
Triple-Tube Core
Barrel Section.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Relief Valve
This rugged pressure relief valve ensures protection of your pump Assembly kg lbs
during drilling operations. It automatically snaps to full open position
1-8 3546492 Relief Valve — —
when the predetermined pressure is exceeded. The pressure setting
can be adjusted within the operating range by simply turning the Parts Qty
adjusting screw on the top of the valve.
1 21841 Adjusting Screw 1
2 22179 Jam, Brass Nut 1
3 3546493 Body 1
4 3546494 Spring Guide 2
1 5 24313 Spring 2
6 3546495 Ball Holder 1
7 21837 Steel Ball, 15/16” 4
8 3546496 Seat 4
NOTE: Refer to the Tech Data section for technical specifications and
the ITHT Product Manual for additional operating information.
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Technical Data
Nominal Dimensions
Drilling Guidelines
Rod Operating Specifications
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR Wireline Coring System HQ
Technical Data
Nominal Dimensions Rod Operating Specifications
HOLE DIAMETER (REAMING SHELL GAUGE) .......... 95.89/96.24 mm (3.775/3.789 in) RATED MAXIMUM DEPTH
HOLE VOLUME (REAMING SHELL GAUGE) .................................. 7.30 L/m (0.60 gal/ft) HRQHP ............................................................................................ 2 500 m (8,200 ft)
CORE DIAMETER/BIT INSIDE DIAMETER HQ .................................................................................................... 1 000 m (3,280 ft)
HQ/HQU ................................................................ 63.37/63.63 mm (2.495/2.505 in) RATED MAXIMUM DRILLING PULLBACK
HQ3 ....................................................................... 60.99/61.24 mm (2.401/2.411 in) HRQHP ....................................................................................... 512 kN (115,000 lbf)
BIT OUTSIDE DIAMETER ............................................. 95.53/95.89 mm (3.761/3.775 in) HQ ................................................................................................. 200 kN (45,000 lbf)
BIT KERF WIDTH RATED MAXIMUM DRILLING TORQUE
HQ/HQU .......................................................................................... 16.3 mm (0.64 in) HRQHP .................................................................................... 3 525 Nm (2,600 ft lbf)
HQ3 ................................................................................................. 17.5 mm (0.69 in) HQ ............................................................................................ 1 356 Nm (1,000 ft lbf)
LOCKING COUPLING OUTER DIAMETER RECOMMENDED MINIMUM MAKE-UP TORQUE to 1 000 m (3,280 ft) depth*
HRQHP/HQ ................................................................................. 1 010 Nm (750 ft lbf)
Full Hole ..................................................................................... 95.48 mm (3.759 in)
Conventional ............................................................................. 95.76 mm (3.770 in) RECOMMENDED MINIMUM MAKE-UP TORQUE FOR DEEP HOLES*
HRQHP over 1 000 m (3,280 ft) ............................................ 2 000 Nm (1,475 ft lbf)
CORE BARREL OUTER TUBE
HRQHP over 2 000 m (6,560 ft) ............................................ 2 750 Nm (2,030 ft lbf)
Outer Diameter ............................................................................... 92.2 mm (3.63 in)
Outer Diameter Full Hole .............................................................. 95.6 mm (3.77 in) MIDBODY MINIMUM YIELD STRENGTH
Inner Diameter ............................................................................... 77.8 mm (3.06 in) HRQHP/HQ ............................................................................... 621 MPa (90,000 psi)
Minimum Flat Diameter - Full Hole ......................................... 91.92 mm (3.619 in) MIDBODY MINIMUM TENSILE STRENGTH
CORE BARREL INNER TUBE HRQHP/HQ ............................................................................. 723 MPa (105,000 psi)
Outer Diameter ............................................................................... 73.0 mm (2.88 in) JOINT MINIMUM YIELD STRENGTH
Inner Diameter ............................................................................... 66.0 mm (2.64 in) HRQHP ................................................................................ 1 070 MPa (155,000 psi)
ROD BODY JOINT MINIMUM TENSILE STRENGTH
HRQHP ................................................................................ 1 241 MPa (180,000 psi)
O.D. .................................................................................................. 88.9 mm (3.50 in)
PURE TENSION TO FAILURE**
I.D. .................................................................................................... 77.8 mm (3.06 in)
HRQHP .................................................................................... 845.2 kN (190,000 lbf)
ROD PIN END LENGTH HQ .............................................................................................. 400.3 kN (90,000 lbf)
HRQHP ......................................................................................... 41.91 mm (1.65 in) PURE TORSION TO FAILURE**
HQ ................................................................................................. 44.45 mm (1.75 in) HRQHP ............................................................................... 21 015 Nm (15,500 ft lbf)
Threads per Inch ....................................................................................................... 3 HQ ......................................................................................... 10 440 Nm (7,700 ft lbf)
ROD WEIGHT ....................................................................................... 11.5 kg/m (7.7 lb/ft)
ROD CONTENT VOLUME ................................................................... 4.8 L/m (0.38 gal/ft) NOTE: Rod capacities and failure loads were determined by independent facility. A
ROD DISPLACEMENT VOLUME ......................................................... 1.5 L/m (0.12 gal/ft) safety factor has been applied for the above ratings (applies to new, unused
ROD/HOLE ANNULUS VOLUME ........................................................ 1.0 L/m (0.09 gal/ft) Boart Longyear rods, in a straight vertical down hole, assuming compliance
HWT CASING to ITHT Product Manual and standard core drilling practices).
Outer Diameter .................................................................................. 114 mm (4.5 in) Burst and collapse pressure ratings will be reduced under drilling loads.
Inner Diameter .................................................................................. 102 mm (4.0 in) Operating torque should not exceed make-up torque.
Weight ......................................................................................... 16.8 kg/m (11.3 lb/ft) * Increase make-up torque to match operating torque as depth increases.
** These failure loads are for product comparison purposes ONLY. Drilling
Drilling Guidelines loads should not exceed rating values.
RECOMMENDED FLOW
.................................................................................... 38 to 45 L/min (10 to 12 gpm) Pressure Ratings (per API bulletin 5C3)
BIT WEIGHT RANGE BURST PRESSURE - Box Shoulder
...................................................................................... 18 to 36 kN (4,000-8,000 lbf) HRQHP Rod .............................................................................. 45.0 MPa (6,560 psi)
BIT PENETRATION @ 1000 rpm HQ Rod ..................................................................................... 30.0 MPa (4,365 psi)
Rate @ 80 r/cm (200 rpi) ....................................................... 13 cm/min (5.0 in/min) HWT Casing ............................................................................. 18.3 MPa (2,656 psi)
Rate @ 100 r/cm (250 rpi) .................................................... 10 cm/min (4.0 in/min) BURST PRESSURE - Midbody
BIT PENETRATION @ 600 rpm HRQHP/HQ Rod ........................................................................ 64.0 MPa (9,850 psi)
Rate @ 80 r/cm (200 rpi) ......................................................... 8 cm/min (3.0 in/min) HWT Casing ............................................................................. 42.9 MPa (6,218 psi)
Rate @ 100 r/cm ( 250 rpi) ...................................................... 6 cm/min (2.4 in/min) COLLAPSE PRESSURE - Midbody
WATER SWIVEL ROTATING LOAD RATING HRQHP/HQ Rod ........................................................................ 60.0 MPa (8,770 psi)
Compact Plus .......................................................................... 4 540 kg (10,000 lbs) HWT Casing ............................................................................. 45.0 MPa (6,560 psi)
Universal .................................................................................. 5 000 kg (11,000 lbs)
HOISTING PLUG STATIC LOAD RATING
Standard ........................................................................... 5:1 = 6,800 kg (15,000 lb)
......................................................................................... 3:1 = 11 300 kg (25,000 lb)
Heavy Duty ...................................................................... 5:1 = 13 500 kg (30,000 lb)
......................................................................................... 3:1 = 22 600 kg (50,000 lb)
WIRELINE CABLE BREAKING STRENGTH
4.8 mm (3/16 in) Swaged ............................................................. 24.5 kN (5,500 lbf)
4.8 mm (3/16 in) Galvanized ....................................................... 16.5 kN (3,700 lbf)
© 2006 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.