Professional Documents
Culture Documents
Division 7: Finishes Specifications
Division 7: Finishes Specifications
Division 7: Finishes Specifications
College of Architecture
Submitted to:
Submitted by:
ARC 214
Part 1: General
referring:
bundles, or containers.
and their products which will be used. Approval of the manufacturers and
PLASTER
1. 3 (three) coat cement plaster with smooth finish coat to receive paint and
wallpaper. 2 (two) coat cement plaster with smooth finish coat to receive
P a g e 2 | 10
3
Exercise 7A- Finishes (Ceilings & Walls) Specifications
work is being performed so that the cement plaster can cure properly.
fluctuations.
CEILING
1. Do not install a wood ceiling until all wet construction work is completed
and the moisture content of the ambient air in the installation room has been
stabilized.
expenses, buildings should employ a consistent ceiling tile, tile size, and
P a g e 3 | 10
4
Exercise 7A- Finishes (Ceilings & Walls) Specifications
PAINT
1. Before applying paint, finish one whole surface of each color scheme,
workmanship.
throughout building.
Architect and apply finishes on identical type materials to which they will be
applied on job.
4. Identify each sample as to finish, formula, color name and number, and
combustion.
manufacturer.
Building Code.
Part 2: Products
1. Ceilings
• CF-1
▪ Thickness: 3.5mm
P a g e 4 | 10
5
Exercise 7A- Finishes (Ceilings & Walls) Specifications
▪ Dimensions: 19 × 25 × 5000 mm
▪ Thickness: 0.4mm
• CF-2
▪ Finish: Matte
▪ Material: Pvc
▪ Dimensions: 19 × 25 × 5000 mm
▪ Thickness: 0.4mm
• CF-3
▪ Thickness: 10.0mm
▪ Color: Bronze
▪ Thickness: 1.00 mm
2. Walls
• WF-1
▪ Color: White
• WF-2
▪ Color: White
• WF-3
▪ Color: White
• WF-4
(Thickness)
Figure 1. https://homeu.ph/products/copy-of-flex-30-series-mdf-slat-fluted-wall-panel
P a g e 6 | 10
7
Exercise 7A- Finishes (Ceilings & Walls) Specifications
1Gal.
• Color: White
• WF-5
▪ Dimension: 53x100cm
▪ Material: Non-Woven
Figure 2.
https://dqvd9g622ecnq.cloudfront.net/media/catalog/product/cache/5bc9fafbd097fcac6ea36e150ae65605/2/8/284
400000397-1.jpg
▪ Color: White
• WF-6
▪ Color: White
P a g e 7 | 10
8
Exercise 7A- Finishes (Ceilings & Walls) Specifications
• WF-7
▪ Color: White
• WF-8
▪ Dimension: 53x100cm
▪ Material: Pvc
Figure
3.https://dqvd9g622ecnq.cloudfront.net/media/catalog/product/cache/5bc9fafbd097fcac6ea36e150ae65605/2/8/2
84400000385-1.jpg
P a g e 8 | 10
9
Exercise 7A- Finishes (Ceilings & Walls) Specifications
Part 3: Execution
CEILING
carrying channels, and no more than 50mm from the perimeter walls.
WALLS
1. Plaster
c. Apply cement plaster using two coat system and three coat system
respectively as indicated.
P a g e 9 | 10
10
Exercise 7A- Finishes (Ceilings & Walls) Specifications
2. Panels
grease and other foreign matter that may affect the effectiveness of
b. Measure and mark the surface where the panels will be attached
d. Apply the panels onto the marked wall and ensure that the panels
are straight.
3. Wallpapers
out.
*End of Section”
P a g e 10 | 10