Outdoor Integrated Cabinet ICC710-HA1-C7

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

PowerCube 1000 Hybrid Power Solution

ICC710-HA1-C7 Datasheet

Introduction

ICC710-HA1-C7 is an outdoor cabinet system used for grid /diesel


hybrid scenario, integrated with a heat exchanger cooling system for
equipment and a DC air-conditioner system for battery. The system
configures DCDU-600AN1, supports max. 9 rectifiers, maximum 600 A
system capacity, supports max. 12 pcs ESM-48100A6/ ESM-48100B1
battery installation, the equipment cabin reserves 19-inch rack space
for other equipment It occupies small footprint, and is easy for
installation and deployment.

Features

 High Power Density


36kW power @ only 5U high
 Innovative Architecture Power
The Power adopts innovative architecture design, supports energy
multiple inputs (solar, mains or D.G.), supports multiple output
modes (AC:220V, DC:12/24/36/48/57V) and multiple service
scenarios.
 AI Synergy
iGrid/ iDiesel intelligent system scheduling improves system
efficiency and reliability
 Intelligent Load management
Enabling precise metering & device-level precise power backup
 Intelligent Voltage Boosting
Supports -57VDC constant voltage output by cooperating BoostLi,
meeting 5G power evolution demand
 Smart Site
Online remote maintenance reduces site visits and O&M costs
ICC710-HA1-C7

Scenarios

 Outdoor scenario
 Grid/diesel hybrid system

Note: Preliminary issue. Any datasheet issued previously is invalid when new version releases. Issue date of this version: 2020-10-31
Specifications
Product Type ICC710-HA1-C7

Dimension (W × D × H) 900 mm × 1270 mm × 1925 mm (including base and protruding part)

Base (W × D × H) 900mm × 950 mm × 150 mm

Weight < 320 kg (without rectifier modules, battery and wrapper)

System Installation Mode Ground installation

Cabling Mode From the bottom

Maintenance Mode From the front and rear

Grounding Bar 7 × M6, 1 × M8

Inner Rack & Space 16 U(front 4U, rear 12U), 19-inch rack (according to actual configuration)

Equipment Cabin Protection Level IP55 (EN 60529)

Cooling Mode Heat exchanger 1500W

Battery Type Max. 12 pcs x ESM-48100A6 / ESM-48100B1

Battery Cabin Protection Level IP55 (EN 60529)

Cooling Mode PC1500D-1, DC air-conditioner (refrigerating capacity: 1500W, L35/L35)

Power Model DCDU-600AN1


Configures AC input unit
Three-phase: 200-240 Vac/346-415 Vac
Input AC Input
Single-phase: 200-240 Vac
Dual live-wire: 200-240 Vac
Normal mode : 42VDC - 58VDC, rated value: 53.5VDC
Voltage
Supports 57VDC constant (must be used together with BoostLi lithium battery)
Output
Capacity Max. 36 kW (600 A)
Power System
Battery Branch 3 × 200 A Fuse

LLVD Branch 2 × 125 A MCB, 3 ×63A MCB (LLVD1)

BLVD Branch 2 × 63 A MCB, 2 × 32 A MCB, 2 × 16 A MCB (LLVD2)

AC Input 30 kA (8/20 μs)


SPD
DC Output 10/20 kA (8/20 μs)

Operating Temperature 0ºC to +45ºC + solar radiation (support -20ºC if configured the pre-heat box)

Storage Temperature -40ºC to +70ºC


Environment
Operating Relative Humidity 5% to 95% (no condensation)

Altitude 0 to 4000 m (1ºC per 200 m temperature derating from 2000 to 4000 m)

Remark:
 DCDU: Direct Current Distribution Unit  SPD: Surge Protective Device

 DC1 Input: 3rd part DC input, such as solar energy input, reused existing -48V DC power input, etc..

Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved. HUAWEI TECHNOLOGIES CO., LTD.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Huawei Industrial Base
General Disclaimer Bantian Longgang
The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, Shenzhen 518129, P.R. China
future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developmentsto differ materially from those
expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an Tel: +86-755-28780808
acceptance. Huawei may change the information at any time without notice.
www.huawei.com

You might also like