Professional Documents
Culture Documents
Sds at 205 at 207 Atp at 205 Re Seal
Sds at 205 at 207 Atp at 205 Re Seal
1. IDENTIFICATION
1.1. PRODUCT IDENTIFIER USED ON LABEL:
Finished Product Item Number LABEL DESCRIPTION ACTUAL BRAND
AT-205 ATP AT-205 RE-SEAL ATP
AT-207 (INACTIVE) ATP AT-207 RE-SEAL ATP
Product Information
Emergency Response
North America: CHEMTREC (800) 424-9300 after 5:00pm CST Or +17035273887
Health Emergency
USA: (800) 264-6457 or +17316454972
2. HAZARD(S) IDENTIFICATION
Page 1 of 9
SAFETY DATA SHEET – ATP AT-205 RE-SEAL #AT-205 - ACTIVE
ATP AT-207 RE-SEAL #AT-207 - INACTIVE
3.1. The chemical name and concentration (exact percentage) or concentration ranges of all ingredients which are
classified as health hazards in accordance with paragraph (d) of §1910.1200
3.1.1.
Skin: Wash skin with soap and warm water. Wash clothing before re-use. If skin irritation or
rash occurs: Get medical advice/attention.
Eye: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Immediately call a poison center/doctor.
Inhalation: Remove person to fresh air and keep comfortable for breathing. Call a poison
center/doctor if you feel unwell
Ingestion: If swallowed: immediately call a poison center or doctor. Do NOT induce vomiting.
Page 3 of 9
SAFETY DATA SHEET – ATP AT-205 RE-SEAL #AT-205 - ACTIVE
ATP AT-207 RE-SEAL #AT-207 - INACTIVE
Page 4 of 9
SAFETY DATA SHEET – ATP AT-205 RE-SEAL #AT-205 - ACTIVE
ATP AT-207 RE-SEAL #AT-207 - INACTIVE
8.7.1. Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
9.5. Melting Point: -134°F (-92.22) 9.6. Solubility (H₂0): Soluble in water
9.9. Octanol/H₂0 Coeff.: No data available 9.10. Evaporation Rate (BUAC=1): <0.01 (butyl acetat=1)
9.13. Auto Ignition: 400°F (204.44°C) 9.14. Lower Flammability Limit: 1.2 @ 275°F (135°C)
9.15. Flash Point: 187°F (86.11°C) 9.16. Upper Flammability Limit: 23.5 @ 359.6°F (182°C)
9.17. Vapor Density (Air=1): 4.64 9.18. Vapor Pressure: .14 mmHg @ 20°C
9.21. Viscosity @ 40°C 3cSt (3 mm²/s) 9.22. Viscosity @ 100°C 1cSt (1 mm²/s)
Page 6 of 9
SAFETY DATA SHEET – ATP AT-205 RE-SEAL #AT-205 - ACTIVE
ATP AT-207 RE-SEAL #AT-207 - INACTIVE
Page 9 of 9