Professional Documents
Culture Documents
EngSpec Xiniu XN18 XXXX D902-E4B-SXN-1 ST1 000 20210322
EngSpec Xiniu XN18 XXXX D902-E4B-SXN-1 ST1 000 20210322
Kubota Engine (Shanghai) Co. Ltd. (KESCO) by: KESCO / Shingo SAKAGAMI
Application Mini-Excavator
Specification Sheet Status : 1. Base engine specification --> Sample engine specification
Notes :
Masking position Specify in detail in case if any special requirement (other than standard masking position requested), by attaching screen shot / pictures.
Rated Power Output (SAE J1995 Gross) ( E4 ) 12.0 kW / 2300 rpm ( E4 ) 12.0 kW / 2300 rpm
Maximum Torque (SAE J1995 Gross) ( E4 ) 52.1 Nm / 1800 rpm ( E4 ) 52.1 Nm / 1800 rpm
1325 rpm
Low Idle rpm
Low idle must be more than 1250 rpm
ECU setting Specify details by ECU Software Request Form. Make sure to update and submit ECU spec sheet as well.
Engine Configuration
Base Engine Modified Spec
No. Part Name REV. REMARKS
PART NO. Qty Description PART NO. Qty Description
010 Comp. Crankcase 1G952-01026 1 No Change
010 Oil Gauge Guide * drain positions 17456-36422 1 EX No Change * Need to describe oil gauge position
010 Drain Cock 16871-73021 1 No Change
012 Comp. Oil Pan * drain positions 1G962-01504 1 bottom No Change * Need to describe drain position
017 Engine Hook (Rear) 15221-01751 1 No Change
017 Engine Hook (Front) 15221-01751 1 No Change
030 Assy. Cylinder Head 1J025-03022 1 No Change
030 Thermo switch none 0 No Change
040 Assy, Gear Case 1E578-04015 1 No Change
050 Assy. Tube (Breather) 1G960-05053 1 No Change
114 Assy. Manifold, Inlet 1G445-11772 1 upward No Change
125 Manifold (Exhaust) 16791-12311 1 backward No Change
142 Assy. Cyl. Head cover 1G960-14506 1 No Change
250 Comp. Flywheel 1J019-25011 1 others / meter / 1.78 Nm^2 No Change
251 Comp. Housing (Flywheel) / Rear End Plate 16867-04624 1 Plate thickness:4.5 mm No Change
320 Filter (Oil, 1) 16851-32112 1 No Change
320 Filter (Oil, cartridge) 1J094-32431 1 No Change
330 Oil Filter Adaptor none 0 No Change
330 Oil Filler Flange * mounting position none 0 No Change * Need to describe mounting position
360 Engine Oil Gauge * gauge position 16829-36413 1 120.5 mm No Change * Need to describe oil gauge position
360 Oil Gauge Guide none 0 No Change
420 Eye Joint * eye joint direction 16809-95684 1 horizontal backward No Change * Need to describe joint direction
510 Assy. Pump (Injection) 1G006-51012 1 No Change
520 Assy. Pump (Fuel) none 0 No Change
560 Start Spring 1G820-56482 1 No Change
560 Governor Spring 16864-56412 1 No Change
562 Assy, Lever (Fork) 1G709-56053 1 No Change
570 Comp, Plate (Speed Control) * lever direction 1G820-57006 1 No Change * Need to describe angle of lever
630 Assy Starter 19269-63013 1 1.4 kW / 12 V / 9 No Change
640 Assy Alternator 16678-64014 1 40 A / 12 V / Terminal P:with No Change
640 Stay, Alternator 16826-64422 1 No Change
640 Stay, Alternator none 0 No Change
640 Support Alternator none 0 No Change
640 Cover,Alternator none 0 No Change
650 Stop Solenoid / Actuator 1G820-60012 1 No Change
723 Comp Flange,Water 1E132-72701 1 No Change
723 Thermo switch 16222-83043 1 normally open / 115 deg.C / R1/8 No Change
731 Thermostat Cover * outlet direction 1E051-73261 1 upward No Change * Need to describe a direction of outlet
731 Assy., Thermostat 19434-73015 1 No Change
740 Pulley,Fan 15841-74252 1 82 mm / V No Change
740 Fan Collar 17053-74151 1 21 mm No Change
740 Fan 16204-74111 1 suction / 300 mm / Number of blades:7 No Change
741 Pulley, Fan Drive 1G962-74281 1 100 mm / without / V No Change
741 Belt, Fan 19449-97012 1 33 inch / cogged No Change
839 Thermo switch none 0 No Change
839 Sensor (rpm) none 0 No Change
839 Switch,Oil 15841-39013 1 49 kPa / normally close No Change
839 Water Temp. Sensor none 0 No Change
Emission Certification
Base Engine Modified Spec
No. Part Name REV. REMARKS
PART NO. Description Necessity Description
870 LABEL (EPA) 1H524-88714 EPA/CARB (CI, Tier4)
870 LABEL (EU) 1H165-88761 EU (StageV)
870 LABEL (JPN) none * Please desribe type of certification you need. (LEMA2, MOC3, MOT)
870 LABEL (KOREA) none * If OEM needs KOREAN certification, machine information needs to register
870 LABEL (CHINA) 1H756-88201 China (Stage3)
870 LABEL (OTHERS) none * Please describe what kind of emission certification you need fot the others.
870 LABEL (OTHERS) none * Please describe what kind of emission certification you need fot the others.
871 LABEL (EPA) Supplementary none
871 LABEL (EU) Supplementary none
880 STATEMENT,WARRANTY 1J021-89851
Signature (Final Agreement for Series Production) Signature (Confirmation for engine adoption or Sample engine preparation)
________________________________ ________________________________