Professional Documents
Culture Documents
Manual Chain Block 1.5T
Manual Chain Block 1.5T
Name and Address of employer for whom the thorough examination was Address of premises at which the
ARMOUR ROCK CONTRACTING examination was made:
UAE.
AL REEM ISLAND , ABU DHABI, UAE
Inspection Procedure.:MSC/TM/10 Standard Ref.: BS EN13157:2004+A1:2009
Identification of any part found to have a defect which is or could become a danger to persons and a description of the defect::
(If none state NONE)
NONE
Is the above a defect which is of immediate danger to persons
YES NO
Is the above a defect which is not yet but could become a danger to persons:
(If YES state the date by when) YES by:
Particulars of any repair, renewal or alteration required to remedy the defect identified above:
NONE
Particulars of any tests carried out as part of the examination: (If none state NONE)
Visual & Functional Examination
Equipment’s / tools used : MSC-E-02 , MSC-E-07
IS THIS EQUIPMENT FIT FOR PURPOSE? YES NO
Name & Qualifications of person making Name of person authenticating this report: Latest date by which next thorough
this report: Sahat Nawaz Signature: examination must be carried out:
07-02-2023
MASTER SAFETY CONSULTANCY LLC, P. O. BOX 92198, MUSSAFAH M-10, ABU DHABI –UAE, TEL: 02-5535560, FAX: 02-5535562
EXAMINATION CHECKLIST
Inspection Details of Lifting Gear Chain Block
Status : S = Satisfactory X = Deficiency R = Recommendation N = Not Applicable
Sr. No. Inspection Item Status Sr. No. Inspection Item Status
1 General Condition S 15 Chain wheel in one piece S
2 Guarding Cover S 16 Hook cracks/ deformities S
3 Hook S 17 Hook latches crack/ deformities S
4 Chain Wheel S 18 Sharpness around the welds S
5 Link Chain S 19 Hook throat opening S
6 Load chain S 20 Chain wear S
7 Load chain wheel S 21 Chain twist S
8 Anchorage of the Load Chain S 22 Handling, Installation & Fastening S
10 Safety latches S 23 Load sprocket wear S
11 Top hook swivelling for correct positioning S 24 Hand chain wheel wear S
12 Automatic breaking function of lever hoist S 26 Spring ratchet S
13 Regular descent of breaking device S 27 Spring S
14 Breaking function when operating force S 28 S
ceases Shafts
Remarks